Professional Documents
Culture Documents
Summary of Cutting Data For Straight Slot Without Open Ends: Material Details
Summary of Cutting Data For Straight Slot Without Open Ends: Material Details
Task details
Straight slot without open ends
Operation type (CTPT)
pre-machining
Pre-machined
40
mm
50
mm
100
mm
mm
Recommended solution
316-10SM545-10004K 1030
AEH10-A09.2-SS-080
Tool
Adaptor
Tool (TOOL)
316-10SM545-10004K 1030
AEH10-A09.2-SS-080
Type (ASMTYPE)
Solid Head
Operation (SUBOPSEQ)
Pocket milling
Grade (GRADE)
1030
Dry
min:s
16:06.000
1.59
1 of 2
1/15/2016
Cutting data
Legend
Helical milling for premachining
Premachining bottom
9.6
10
mm
1.82
1.82
mm
Number of passes in AE
direction (NOPAE)
Number of passes in AP
direction (NOPAP)
22
19.2
mm
139
m/min
1/min
3.6
147
4680
4420
0.0487
0.0537
mm
1140
1190
mm/min
546
1.12
1.21
kW
19.9
21.6
cm3/min
min:s
mm/min
01:09.600
15:00.000
29
28
25
24
min
Legal Notice
The data provided may be used at your own risk. AB Sandvik Coromant does not guarantee the applicability and functionality of the program, particularly the accuracy of the calculations. AB Sandvik Coromant will not accept any liability for trouble-free and
faultless use of the program. The user bears the entire risk of use.
In no event are Sandvik Coromant and its staff liable to the user for any damages, disadvantages and expenses, including any pecuniary damages, loss of data, etc., arising for the user or a third party out of, or in connection with, the use of, or inability to
use, the program. This exclusion of liability does not apply when and in as such as damages, disadvantages and expenses are caused intentionally or by gross negligence on the part of the staff of AB Sandvik Coromant.