a. Chemical injection is a type of side pocket mandrel b. Blast joint is not used near perforations c. Swab valve is used for well intervention jobs. True, False, True 2. Given Grain Size for Reservoir B > Grain Size for Reservoir A, then a. Por A > Por B, Per A > Per B b. Por A < Por B, Per A < Per B c. Por A = Por B, Per A > Per B d. Por A = Por B, Per A < Per B Ans d Data for Q 4- Q 7 Depth (m) Pressure (psi) Fluid Type 700 ~~say 550 Gas (den= 0.1 psi/ft) 1000 ~800 Oil (den= 0.35 psi/ft) 1200 1300 Water (den= 0.65 psi/ft) 3. Find GOC and WOC 4. Find length of oil column (h) 5. Find STOIIP Por= 0.2, Sw= 0.2, Sg= 0.05, Area= 100 acres Ans 40.3 bbls 6. Calculate pore volume 7. Type of Artificial lift for highly viscous oil and unconsolidated formations Ans PCP 8. Kill fluid gradient= 0.44 psi/ft Diesel gradient= 0.33 psi/ft THP= 100 psi Depth= 1050 m Find length of diesel column for BHP= X psi 9. For above data, find volume of Kill fluid if tubing size= 4.5" 10. To reduce inducing of kick, what factor should be considered precisely Ans swabbing 11. For well planning, drilling window depends on which of the following a. Formation strength, Formation Pressure b. Hole size, Formation Pressure
c. Formation Strength, ROP
d. Hole Size, ROP Ans a 12. Advantage of OBM over WBM is, choose from options Ans less hydration of clays and less formation damage 13. Arrange the following statements in the order for procedure used for killing: Ans Observe for pit gain Stop drilling Close rams Note Pressures Circulate kill mud weight Flow Check Open rams Resume drilling 14. Stablisers are used for, choose from given options Ans Directional Control 15. Label the rig equipments as given in the figure: Derrick, rotary table, draw works, drum, fast line, swivel, mud pumps, kelly, drill collars, drill pipes, travelling block, shale shaker.