Professional Documents
Culture Documents
DUW Replacement
DUW Replacement
Once the FTP transfer has been done with the latest CV, we can create a new flder and name it
for instance UP in a directory C:/SW
C:\SW\CV\up
Here we can copy the latest upgradepackage corresponding to our CV. For instance
OP_CXP9016141%1_R2F05_100424_0915
2. Power off and take out the optical fibers. Take out DUW board and put it in the new one.
3. IMPORTANT: Before powering on, connect back the optical fibers in order the RRUW to get
the old fingerprint.
4. Execute: reload
5. When it recovers, execute vols command. Check if c2 partition is visible. If not use the
following command: mount_c2
6. Execute: formathd /d y formathd /c2:
RBS answers with the following printout:
All data on volume will be destroyed. Continue? y/n
(n): y
7. Restart DUW in backup mode: reload
8. Write ifconfig le0 <ipaddress> netmask <netmask>. Use ipaddress and netmask with the
Ip address of the node. Check if it is ok:
$ ifconfig
le0: inet 10.164.130.137 netmask 255.255.255.252 broadcast 10.164.130.139
9. From laptop (cmd), Start, Run, cmd. Change to the directory where the backup is in the local
computer. Execute the following command:
ftp -v -s:cvftpput.sh <ipaddress>
10. Change to the directory where the upgrade package is located in the local computer. Execute
the following command:
ftp -v -s:<pathToCV>\misc\upftpput_<no_rev>.sh <ipaddress>
11. Restart the node and check that the node starts up when the proper sw pakage. Also check
that the fingerprint is the same than before:
$ license server
License Server
: 000101d2
Latest PV
:3
License Key File
: Installed, Tue Mar 30 15:17:38 2010
Sequence Number
: 1004
Node Identity State : 1
Backplane Node Id : 343398_504454
Generated Node Id :
Validation Start
: Wed Apr 14 18:25:30 2010
Validation Interval : 1 Day
Emergency Status
: Deactivated
Emergency State
:0
Emergency Counter : 0
Emergency State Time : Tue Mar 30 15:17:38 2010
Emergency Time Limit : 7 Days
$