Professional Documents
Culture Documents
Assignment: A01-426-1161-Xxxx PDF
Assignment: A01-426-1161-Xxxx PDF
Assignment
01
Ensc 426-1161
Spring 2016
A01
Instructions:
Papers are to be submitted as .pdf documents, uploaded to the CANVAS system.
Your document should
not exceed 200 kibibytes per page and
be named A01-426-1161-xxxx.pdf where xxxx are the last four digits of your student ID.
Submission Format:
You may create your solutions either by hand or using software such as Visio. In both cases the
structure and quality should be clear, concise and reasonably professional.
Submitting a scan of your rough draft is not acceptable. You should create a logically clear and concise
draft that is neatly written before scanning to pdf.
All diagrams should be neatly drawn with careful thought. Components should be placed so as to
avoid lines crossing.
1)
Vs(t)
Vl(t)
R L 100
Z=l
Z=0
2)
3)
Fig.2
Zo=400
Z=800-j300
@3GH z
l2
page 1 of 2
A01
Assignment
01
Ensc 426-1161
Spring 2016
4)
Given that the voltage standing-wave ratio is S=2.5 on a 50 line, that the first voltage
minimum occurs at 0.9 cm from the load, and that the distance between successive
minima is 2.1 cm, find the load impedance.
5)
page 2 of 2
A01