~FUGRO-SUHAIMILTD,
funwn- Sonar
CALIBRATION DEPARTMENT jessie
"asco For pao 08
na haootengeerseon
!
(CERTIFICATE No. 058077-74409
ge tof 2
CALIBRATION CERTIFICATE OF SIEVE
cunt:
Office
ADDRESS: AlKhobar, Kingdom of Saudi Arabia
‘Ayed Eid Al Osaimi Consulting Civil Engineering PROJECT No.: SADS-8077
DATE: 30 January 2015
This sto certty thatthe equipment described below has been calibrated by Fugro-Suhaimi Limited.
‘This certificate applies only to the equipment specified in thie cerca.
Details of Device under Calibration (DUC)
(Gorman supa bye sen
Description ‘SIEVE
Manulacturer: GILSON
Model Serial identncation No. | 10209828 /EKS-120
Cepacity/ Range 250 um
Resolution / Accuracy NA
‘Speciation Limit ‘As per Manufaciurers Speciation
Remarks Ni
Calibration Details:
Dale Insiument Recsived [28 January 2015
Calibration Date:
30 January 2015
| Next Catbration Due Date
30 January 2016
Location of Calibration:
FFSL Calbraton Laboraton, Dammam
Calibrated by: Mw
Checked by: ZHR
Remarks Ni
Roviewad By ‘Approved By
albiaton Technician aoe Rehman
‘Supetvisor Calibration Laboratory, Dammam
30 January 2016
Baie
'80 70262005 ACCREDITED LABORATORY
‘The conipit is eomenwonrety FuyeSu Li inate epeices nN wt pp fom eons.
CALBOOreIrOrCHaD:9 ———_Ammeméer of the Fugro group with ofc wordwide“Te cpnianatt sou
FUGRO-SUHAIMI LTD.
{CALIBRATION DEPARTMENT
Talc) as ao Fue (ease aag
pfege Seam
SS
See ees, A eal
CERTIFICATE Na oso? 2a Patera
RESULTS OF CALIBRATION OF SIEVE
Catiaton Procedurs
Cabaton Paced FELCALAGS
Relererce sandr ASTME 11 SSATITET
Calibration Data
supe [oanewrieci | sinesinn) [ag TTS,
Ear 3] 756 ecplabe
‘Tho Seve is examined visually Yor weaving GEIEGS, ceases, winKleS
and foreign matter, by viewing against a uniformly iluminateg
(On examination the sieve
backaround. | found tobe acceptable
Factor k-2, proving a level of confidence of approximately 85%
‘Test Conditions:
Measurement Uncertainty: The expanded uncerianty ofthe above measurement im extmmaled
alto exceed + 0.01 um, based on Type A and B Standard uncetantes mulpled by a coronas
‘Ariblent Temperature 20s
Relative Hum: 50%
Details of Reference Device:
Description: Digital Vernier Calper
Manufacturer mTuTOve
‘Serial /dentfication Number] FSLID Ne, 0-251
Resolution / Least Count 0.0% mm
Calibration Traceabity “Traceable to International Standard
Calibration Expiry Date (05 May 2016
Remarks! Ni
's0 #7028200 accREDITED LABORATORY
{CAL 800/e1/0-ce2013 member ofthe Fugro group wih ofces wordwide
owes by Fao Stam Kays te apie! natin adh tena em omg ny—