Professional Documents
Culture Documents
CATIA Assy Project s04
CATIA Assy Project s04
Project: #2
Project: #3
Project: #4
Project: #5
Project: #6
Project: #7
Project: #8
Project: #9 (Optional)
This particular project is going to be a bit more challenging but you may find it more interesting than the
other assemblies. In the following figures you will see a sketch of a 4-blade tail rotor for a CH-54
helicopter. Unfortunately, there are no dimensions shown, but the assembly is drawn to scale. For this
project, you are to create an assembly model of the rotor hub, and you are to include the blade pitch
control mechanism. You should model the main shaft and control shaft as simple cylinders and you do
not need to model more than the cuff portion of the blades. You are free to choose dimensions that are
roughly proportional to the sketch. You can assume that the overall hub is approximately 16 inches (or
40 mm) across from cuff to cuff. If you have questions, either the instructor or TA can explain the
functions of each part.
If you choose this project, you should disregard the project originally assigned to you and submit #9
instead. (You can switch back to the original project at any time.)