Professional Documents
Culture Documents
Cummins Isb/Isc/Isl: C/W CM 850 Electronic Control Module
Cummins Isb/Isc/Isl: C/W CM 850 Electronic Control Module
CUMMINS ISB/ISC/ISL
On Vehicles: (WITH) Allison MD3060 WTEC III transmission (WITH or WITHOUT) ABS braking (WITH) on-board air system
Note: Do not use on vehicles equipped with Allison 4th Generation Transmissions, they are identified by one connector at the
transmission ECU, consult Pacbrake factory
Pacbrake solenoid
Pacbrake
On/Off switch
Exhaust
brake
fuse
Ignition
power supply
86
87a
85
30
Connect
to pin 18
Wire132
Allison ECU
(Gray)
Connect
to pin 22
V3
(Black)
(4 pin)
S11
O?
Connect to
switch return
pin 34 of
OEM port.
Engine Port
(60 pin)
OEM Port
(50 pin)
Wire 119
CM850 ECM
NOTE:
Information for this schematic was derived from vehicle systems at the date of this printing.
Updates or variations by vehicle manufacturers constituting changes will not be the responsibility of Pacbrake.
Cummins Pin 22 is connected to a weather-pac connector at rear of cylinder head.
L5391.130705