Professional Documents
Culture Documents
Universiti Teknologi Mara Final Examination: Confidential EM/SEP 2011/MEC111
Universiti Teknologi Mara Final Examination: Confidential EM/SEP 2011/MEC111
CONFIDENTIAL
COURSE
STATICS
COURSE CODE
MEC111
EXAMINATION
SEPTEMBER 2011
TIME
3 HOURS
INSTRUCTIONS TO CANDIDATES
1.
2.
Answer ALL questions in the Answer Booklet. Start each answer on a new page.
3.
Do not bring any material into the examination room unless permission is given by the
invigilator.
4.
Please check to make sure that this examination pack consists of:
i)
ii)
CONFIDENTIAL
CONFIDENTIAL
EM/SEP 2011/MEC111
QUESTION 1
a)
i)
ii)
b)
i)
ii)
Figure Q1(b)
CONFIDENTIAL
CONFIDENTIAL
EM/SEP 2011/MEC111
QUESTION 2
a)
Two buckets are suspended in the equilibrium positions as shown in Figure Q2(a).
Knowing that bucket A has a weight of 60-N.
i)
ii)
Figure 0.2(a)
b)
Figure Q2(b)
CONFIDENTIAL
CONFIDENTIAL
EM/SEP 2011/MEC111
QUESTION 3
a)
Figure Q3 shows the cross-sectional area of a beam. Determine the coordinate of the
centroid C, of the cross-sectional area.
(10 marks)
b)
For the same cross-sectional area shown in Figure Q3, determine the moment of
inertia of the area with respect to the centroidal x-axis and the corresponding radius of
gyration.
(10 marks)
180 mm
C !
f
i
O
150 mm
Figure Q3
CONFIDENTIAL
CONFIDENTIAL
EM/SEP 2011/MEC111
QUESTION 4
a)
A beam is loaded as shown in Figure Q4(a). Neglecting the thickness of the beam,
calculate the horizontal and vertical component of reactions at supports A and B.
(6 marks)
200 N
250 N
/\
B
><r
1m
1m
1m
Figure Q4(a)
b)
A truss is subjected to the loadings as shown in Figure Q4 (b). Determine the reaction
forces at supports A, G, and forces in members AB, BG and FG. States if the members
are in tension or compression.
(14 marks)
D
20 kN
\*
5m
*\
Figure Q4(b)
Hak Cipta Universiti Teknologi MARA
CONFIDENTIAL
EM/SEP 2011/MEC111
CONFIDENTIAL
QUESTION 5
a)
The pliers shown in Figure Q5(a) is used to grip an 8-mm diameter rod. For an 80-N
force squeeze on the handle of the pliers, determine the force applied to the round rod
by each jaw.
(5 marks)
80 N
80N
Figure Q5(a)
b)
ii)
Figure Q5(b)
CONFIDENTIAL