You are on page 1of 5

IT

Industrial
For Power Generation

Power Generation Portal

Version 4.1
Service Pack 3
Hotfix 1

Fixed issues

NOTICE
The information in this document is subject to change without notice and should not be
construed as a commitment by ABB. ABB assumes no responsibility for any errors that may
appear in this document.
In no event shall ABB be liable for direct, indirect, special, incidental or consequential
damages of any nature or kind arising from the use of this document, nor shall ABB be liable
for incidental or consequential damages arising from use of any software or hardware
described in this document.
This document and parts thereof must not be reproduced or copied without written permission
from ABB, and the contents thereof must not be imparted to a third party nor used for any
unauthorized purpose.
The software or hardware described in this document is furnished under a license and may be
used, copied, or disclosed only in accordance with the terms of such license.
This product meets the requirements specified in EMC Directive 89/336/EEC and in Low
Voltage Directive 72/23/EEC.
Copyright 2008 by ABB
All rights reserved.
Release: December 2010
Document number: 1MMC-PRU-188

TRADEMARKS
Registrations and trademarks used in this document include:
Windows Registered trademark of Microsoft Corporation
Industrial IT Trademark of ABB

Table of Contents

Table of Contents
1. PGP 4.1 SP3 HF1 FIXED ISSUES................................................................................. 4
1.1 Playback data retrieval .......................................................................................... 4
1.2 Driver SNMP............................................................................................................ 4
1.3 Kill Client................................................................................................................. 4
1.4 Networking.............................................................................................................. 4
1.5 Driver 104................................................................................................................ 4
1.6 Scanner ................................................................................................................... 4
1.7 Playback Compression.......................................................................................... 4

1MMC-PRU-188

1. PGP 4.1 SP3 HF1 FIXED ISSUES


1.1 Playback data retrieval
The problem was causing a slow down of client and server performance during the retrieval of
data.

1.2 Driver SNMP


There was an abnormal consuming of Handles during the normal driver operations

1.3 Kill Client


If use the command line killer killclient with more than one TntExplorer windows active, only the
TntExplorer windows whit focus is automatically closed, all the other show a messagebox with
"Confirm closing this window" and dont close automatically.

1.4 Networking
Subthread dedicated to PLB alignment sometimes ended abnormally: an error message is printed
in ErrorLog file, this print was repeated several times.

1.5 Driver 104


File transfer name of file transferred via 104 seems composed incorrectly (the value "0" is present
in file name instead of the value of device address).

1.6 Scanner
Redundancy state management. In some cases the driver status is not according with the
redundancy configuration settings

1.7 Playback Compression


Playback compression was not working and the data retrieval was affected.

1MMC-PRU-188 Printed in Italy December 2010


Copyright 2008 by ABB. All rights reserved.
Registered Trademark of ABB.
Trademark of ABB.

ABB Power Systems Division


Via Albareto 35
16153 Genova - Italy
e-mail pgp.supportline@it.abb.com
http://www.abb.com/powergeneration

You might also like