Safety glasses, goggles or full face shield must be worn When using the drill. When drilling, securely clamp the stock to prevent spinning or climbing the drill. Run the drill at speeds appropriate to the work. Feed a bit too fast can break the bit and cause damage.
Safety glasses, goggles or full face shield must be worn When using the drill. When drilling, securely clamp the stock to prevent spinning or climbing the drill. Run the drill at speeds appropriate to the work. Feed a bit too fast can break the bit and cause damage.
Safety glasses, goggles or full face shield must be worn When using the drill. When drilling, securely clamp the stock to prevent spinning or climbing the drill. Run the drill at speeds appropriate to the work. Feed a bit too fast can break the bit and cause damage.
Sinopec International Petroleum Service Corporation Version : 03 Classification : Internal
: 03
: Amend No
: 01 : 01
valid From Approved
: 2011-09-01
Validity Area : All Activity location
:
: 2011-09-01
Drill Machine Procedure:
When using the drill, safety glasses, goggles or full face shield must be worn. Prior to operation, be sure the chuck key is out of the chuck. Do not operate with loose clothing. Check electrical cables and connections to ensure insulation is good before switching on machine. When drilling, securely clamp the stock to prevent spinning or climbing the drill. If stock is not clamped securely, turn off the drill. In no case rely on your hands to secure the stock. Do not use dull bits. Run the drill at speeds appropriate to the work. Feeding a bit too fast can break the bit and cause injury.