Professional Documents
Culture Documents
#
#
#
#
#
#
#
#
This file contains error messages which are shown to user, when http/https
login is used.
These messages can be changed to make user interface more friendly, including
translations to different languages.
Various variables can
$(error-orig)
$(ip)
$(username)
# internal-error
# It should never happen. If it will, error page will be shown
# displaying this error message (error-orig will describe what has happened)
internal-error = internal error ($(error-orig))
# config-error
# Should never happen if hotspot is configured properly.
config-error = configuration error ($(error-orig))
# not-logged-in
# Will happen, if status or logout page is requested by user,
# which actually is not logged in
not-logged-in = you are not logged in (ip $(ip))
# ippool-empty
# IP address for user is to be assigned from ip pool, but there are no more
# addresses in that pool
ippool-empty = cannot assign ip address - no more free addresses from pool
# shutting-down
# When shutdown is executed, new clients are not accepted
shutting-down = hotspot service is shutting down
# user-session-limit
# If user profile has limit of shared-users, then this error will be shown
# after reaching this limit
user-session-limit = no more sessions are allowed for user $(username)
# license-session-limit
# Depending on licence number of active hotspot clients is limited to
# one or another amount. If this limit is reached, following error is displayed.
license-session-limit = session limit reached ($(error-orig))
# wrong-mac-username
# If username looks like MAC address (12:34:56:78:9a:bc), but is not
# a MAC address of this client, login is rejected
wrong-mac-username = invalid username ($(username)): this MAC address is not you
rs
# chap-missing
# If http-chap login method is used, but hotspot program does not receive
# back encrypted password, this error message is shown.
invalid-username
Most general case of invalid username or password. If RADIUS server
has sent an error string with Access-Reject message, then it will
override this setting.