2iera0%6
vmantec Questions & Answe
250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
Just another ALL IN ON Testking sites
Search
Search for: Go| Search
Exam Information
RSS feed for this section
This category contains 235 posts
CheekPoint
Cisco
cw
CompTIA
CWNP
EC-Council
Isc2
Juniper
Linux
Isilon
PMI
HP
IBM
Exam 250-253: Administration of Veritas Cluster Server 6.0 for Unix
Which actions are required to enable a service group to run on all
systems in a cluster simultaneously?
Posted by seenagape on February 10, 2016 No comments
Which actions are required to enable a service group to run on all systems in a cluster
simultaneously?
A
Stop Veritas Cluster Server, edit main.cf so the service group AutoStartList attribute
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2!
13aeraore 250-253 Archives - Page 2 of - Symantec Question & Answers
includes all cluster systems, and restart Veritas Cluster Server
B.
Run the hagrp -modify [service group] Parallel | command and the service group will
utomatically restart on all systems
c.
Take the service group offline, add all cluster systems to the AutoStartList, and bring the
service group back online with the -all option
D.
Stop Veritas Cluster Server, edit main.cf to turn the Parallel attribute on, add all cluster
systems to the AutoStartList, and restart Veritas Cluster Server
Which type of resources are considered by Veritas Cluster Server
when determining whether a service group is online?
Posted by seenagape on February 10, 2016 No comments
Which type of resources are considered by Veritas Cluster Server when determining
whether a service group is online?
A
None
B,
Persistent
c
OnOnly
D.
Onoff
Explanation:
Which characteristic of Veritas Cluster Server attributes allows
the public interface to be different for each of the systems in the
cluster?
Posted by seenagape on February 10, 2016 No comments
Which characteristic of Veritas Cluster Server attributes allows the public interface to be
different for each of the systems in the cluster?
A
Global
B.
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 21232iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
Local
Cc
Custom
D.
Proxy
What happens when a DLP Agent is unable to connect to its
preferred Endpoint Server
Posted by seenagape on February 10, 2016 No comments
‘What happens when a DLP Agent is unable to connect to its preferred Endpoint Server?
AL
If any Endpoint Server is running, the agent automatically connects to it after a period of
time
B.
If any Endpoint Se running, and if the agen
connects to it after a period of time.
er i
‘onfigured to recognize it, the agent
c
If any detection server in the system is running, the agent automatically connects to it
after a period of time.
D.
Ifany detection server is running, and if the agent is configured to recognize it, the agent
connects to it after a period of time.
Explanation:
Which statement describes a DLP Agent encryption feature?
Posted by seenagape on February 10, 2016 No comments
Which statement describes a DLP Agent encryption feature?
AL
DLP Agent-to-server communication uses Secure Socket Layer (SSL).
B
The key size is standard and unconfigurable.
c
The key is randomly generated for the agent store,
D.
The system administrator can generate a unique authentication key.
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 382iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
How can a system administrator obtain the log files for a
detection server?
Posted by seenagape on February 10, 2016 No comments
How can a system administrator obtain the log files for a detection server? (Select three.)
A.
Download logs from the System Overview page
B.
Select Logs under Administration node
c
Click Fetch Latest on the Server Detail page
D.
Run the Log Collection Utility (LCU)
E.
Navigate to the logs directory
Explanation:
Where can an incident responder view all actions that have
occurred for an incident?
Posted by seenagape on February 10, 2016 No comments
Where can an incident responder view all actions that have occurred for an incident?
A
Incident Snapshot
B.
Auditlog Table
c.
Incident Actions
D.
System Events
Which resource will start online last?
Posted by seenagape on February 10, 2016 No comments
Refer to the following service group example: group websg ( Systeml
=1} AutoStart = 0 AutoStartL
{ syml =0, sym2
{ sym2 } ) DiskGroup webdg ( DiskGroup = webdg ) IP
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 423aeraore 250-259 Archives - Page 2 of 24 -Symaniee Questions & Answers
webip ( Device = ethO Address = “169.254.128.12” NetMask = “255.255.255.0” ) Mount
webmnt ( MountPoint = “/web1” BlockDevice = “/dev/vx/dsk/webdg/webvol” FSType = vxfs
MountOpt = rw FsckOpt = “y” ) NIC webnic ( Device = eth0 ) Application webproc (
MonitorProgram = “/usr/locai/bin/web -monitor” StartProgram = “/ust/local/bin/web -start”
StopProgram = “/usr/local/bin/web -stop” ) webip requires webproc webproc requires
‘webmnt webip requires webnic webmnt requires webdg Which resource will start online
last?
A
webip
B.
webmnt
c.
webproc
D.
webdg
Which attribute can accomplish this?
Posted by seenagape on February 10, 2016 No comments
An application is experiencing failures. The application administrator wants Veritas Cluster
Server to take all resources offline after failure. The application should remain offline. Which
attribute can accomplish this?
A.
Critical
B.
ManageFaults
c.
FailOverPolicy
D.
AutoFailover
Which three statements apply to communication between the
Enforce Server and detection servers?
Posted by seenagape on February 10, 2016 No comments
Which three statements apply to communication between the Enforce Server and detection
servers? (Select three.)
A
By default, the Enforce Server and the detection servers communicate over port 8100.
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 51232iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
B.
Port 3389 must be open between the Enforce Server and the detection servers,
c.
The same port number must be used for all detection servers
D.
The servers can be configured to use any port higher than 1024.
E.
IPSec must be configured on the Enforce Server and the detection servers.
Which service group attribute enables specifying preferred nodes
for failover?
Posted by seenagape on February 10, 2016 No comments
‘Which service group attribute enables specifying preferred nodes for failover?
A
SystemZones
B,
AutostartList
c.
ClusterList
D.
IntentionalOnlineList
Which two are default behaviors of Veritas Cluster Server service
groups
Posted by seenagape on February 10, 2016 No comments
Which two are default behaviors of Veritas Cluster Server service groups? (Select two.)
AL
AutoDisable the service groups on a system when all low priority links fail
B
Start the service groups in the order of the attribute SystemList
Cc.
Migrate service groups from a system on intentional system shutdown
D.
Start the service groups in lexical order
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 61232rera0%6 250-253 Archives - Page 2 of - Symantec Question & Answers
E.
AutoDisable the service groups on cluster startup
which FailOverPolicy
Posted by seenagape on February 10, 2016 No comments
System capacity and service group load are the main components for which
FailOverPolicy?
A.
Order
B.
Limit
c
Capacity
D.
Load
hat will happen to the websg service group?
Posted by seenagape on February 10, 2016 No comments
Consider the following configuration: group websg ( SystemList = { syml = 1, sym2=2 }
AutoStartList = { sym1 } Frozen = 1 ) While websg is online, all of the systems in the cluster
are rebooted simultaneously. All of the systems finish booting and successfully join the
cluster. What will happen to the websg service group?
AL
It will unfreeze on reboot and start on syml.
B.
It will start on sym1 ina frozen state
c.
It will remain offline on all systems.
D.
It will resume its state before the reboot.
what will happen to the websg service group?
Posted by seenagape on February 10, 2016 No comments
The service group named websg is currently online on the sym3 node. Alll other nodes are
running. Consider the following partial main.cf definition: Group websg ( SystemList = {
hntpsinw alotestking.comisymantecieategorylsngllexam-250-253-administration-of-veras-cluster-server-6-0or-unxlpagel2! 7232rera0%6 250-253 Archives - Page 2 of - Symantec Questions & Answers
sym1=0, sym2=1, sym3=2 } AutoStartList = {sym2, sym3 } FailOverPolicy = Priority ) The
operator incorrectly shuts down a critical resource in the websg service group outside of
Veritas Cluster Server. Based on the information provided, what will happen to the websg
service group?
A
It will remain partially online on the sym3 node.
B.
It will switch to the sym1 node.
c.
It will switch to the sym2 node.
D.
It will restart on sym3 node.
Explanation:
What should be done before removing a resource named webdg
from a running service group
Posted by seenagape on February 10, 2016 No comments
What should be done before removing a resource named webdg from a running servi
group?
A.
All child resources of webdg must be taken offline.
B.
All parent resources of webdg must be taken offline
Cc.
The service group must be taken offline.
D.
The service group must be disabled.
Which Network Discover option is used to determine whether
confidential data exists without having to scan the entire target?
Posted by seenagape on February 10, 2016 No comments
Which Network Discover option is used to determine whether confidential data exists
without having to scan the entire target?
A
Exclude
ering
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 81232iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
B.
File Throttling
c.
Byte Throttling
D.
Inventory Mode Scanning
Explanation:
which high-level node in the left navigation panel can
administrators find the System Events repor
Posted by seenagape on February 10, 2016 No comments
Under which high-level node in the left navigation panel can administrators find the System
Events report?
AL
Policy
B.
System Health
c.
Reports
D.
Administration
Which two are valid settings for FailoverPolicy?
Posted by seenagape on February 10, 2016 No comments
Which two are valid settings for FailoverPolicy? (Select two.)
A.
Dynamic
B.
Priority
c.
RoundRobin
D.
Order
E.
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 91232iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
Failover
Explanation:
Which Veritas Cluster Server utility can be used to prototype
cluster logic using minimal hardwar
Posted by seenagape on February 10, 2016 No comments
Which Veritas Cluster Server utility can be used to prototype cluster logic using minimal
hardware?
A
AgentTester
B.
Fencing
c
Simulator
D.
AgentServer
How can this problem be solve:
Posted by scenagape on February 10, 2016 No comments
An additional email address was added to the Veritas Cluster Server notifier resource
without any other actions being taken. All but one user is receiving notifications. How can
this problem be solved?
A.
Refresh the mailbox of the impacted user
B.
Restart the notifier resource
c.
Restart the SNMP daemon
D.
Restart the HAD daemon
Explanation:
Which information is available on a scan listing on the Discover
Targets page?
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 401232rera0%6 250-253 Archives - Page 2 of - Symantec Question & Answers
Posted by seenagape on February 10, 2016 No comments
A system administrator examines the results of a completed scan, Which information is
available on a scan listing on the Discover Targets page? (Select three.)
A.
User who initiated the sean
B.
Elapsed time and total time for each scan
c.
‘Number of items scanned
D.
Number of items changed since the previous scan
E
File structure and loc
Errors encountered
how many minutes
Posted by scenagape on February 10, 2016 No comments
When configured as default, the Veritas Cluster Server Notifier receives queued messages
ona schedule every how many minutes?
A.
Three
B.
Five
c.
One
D.
Ten
what order should the components be stopped?
Posted by seenagape on Feb
ary 10, 2016 No comments
The procedure for making changes to the Veritas Cluster Server (VCS) cluster
communications involves stopping the components in the communications stack, modifying
the configuration files, and restarting the stack. In what order should the components be
stopped?
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 111232iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
A.
LLT, GAB, I/O fencing
B.
VCS, I/O fencing, GAB, LLT
c
VCS, 1/0 fencing, LLT, GAB
D.
W/O fencing, VCS, GAB, LLT
What is a characteristic of the Veritas Cluster Server
communication stack?
Posted by seenagape on February 10, 2016 No comments
What is a characteristic of the Veritas Cluster Server communication stack?
A.
Agents communicate resource status information with HAD.
B,
LLT determines cluster membership by monitoring heartbeats over GAB.
Cc.
The HAD processes propagates information to other nodes by way of agents.
D.
Agents can communicate with each other directly over GAB.
What is the correct order for the cluster and heartbeat protocols
to be shut down?
Posted by seenagape on February 10, 2016 No comments
A Veritas Cluster Server (VCS) administrator has to change NICs used as the heartbeat
links due to network reconfiguration What is the correct order for the cluster and heartbeat
protocols to be shut down?
A.
VCS — Fencing > GAB > LLT
B
VCS > Fencing > LLT > GAB
Cc.
Fencing -> VCS -> GAB -> LLT
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 2232iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
D.
Fencing > VCS -> LLT > GAB
Which three options can incident responders select when deleting
incidents?
Posted by seenagape on February 10, 2016 No comments
‘Which three options can incident responders select when deleting incidents? (Select three.)
A.
Delete the incident completely
B,
Delete the non-violating attachments or files and retain the incident
c.
Delete the incident and export incident details to .csv file
D.
Delete the original message and retain the incident
E.
Delete the incident and retain the violating attachments or files
Which command is run to manually seed GAB?
Posted by seenagape on February 10, 2016 No comments
A two node cluster is being brought online, but one node is unable to boot. Which command
is run to manually seed GAB?
AL
gabconfig -x
B.
gabconfig -n2
C.
litconfig -x
D.
litconfig -n2
Which three products support virtualization and can be run on
virtual machines?
Posted by seenagape on February 10, 2016 No com
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 131232iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
‘Which three products support virtualization and can be run on virtual machines? (Select
three.)
AL
Endpoint Discover
B.
Network Discover
c
Network Prevent (Web)
D.
Network Monitor
E,
Network Prevent (Email)
Which two items are required to replace a coordinator disk while
the cluster is online?
Posted by scenagape on February 10, 2016 No comments
Which two items are required to replace a coordinator disk while the cluster is online?
(Select two.)
A
Replace the LUN and ereate the disk as a Logical Volume Manager (LVM) Disk
B.
Run the vxfenadm command to replace the removed LUNs
c.
Run the installves -fencing command to replace the removed LUNs
D.
Replace the LUN and create the disk as a Veritas Volume Manager (VxVM) Disk
E.
Replace the LUN and create the disk as either a VxVM or LVM Disk
What are two reasons to implement SCSI-3 I/O fencing?
Posted by seenagape on February 10, 2016 No comments
What are two reasons to implement VO fencing? (Select two.)
A.
Disk-based heartbeat
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 141232iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
B.
Data protection
c.
Lock disk
D.
Cluster communication
E.
Membership arbitration
which two cases will the agent status remain green (good) on the
Agent Events page
Posted by seenagape on February 10, 2016 No comments
In which two cases will the agent status remain green (good) on the Agent Events page?
(Select two.)
A
The agent closed the connection to the Endpoint Server.
B.
The Endpoint Server detected that the connection with the agent was lost.
c.
There was agent or server authentication failure.
D.
The agent is unable to restore a database file.
E.
There was an agent service shutdown during machine shutdown.
Which Preferred Fencing policy should be configured to ensure
that the node with the preferred application survives a fencing
event?
Posted by seenagape on February 10, 2016 No comments
Which Preferred Fencing policy should be configured to ensure that the node with the
preferred application survives a fencing event?
A.
PreferredFencingPolicy = Site
B.
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 15123aaraoe 250-253 Archives -Poge 2 of 24 - Symantec Question & Answers
PreferredFencingPolicy = System
c
PreferredFencingPolicy ~ Group
D.
PreferredFencingPolicy = Disabled
Which node(s) will survive the fencing race?
Posted by seenagape on February 10, 2016 No comments
Refer to the exhibit. An administrator has configured preferred fencing, Cluster
communication breaks and separates sym| from the other cluster nodes. Which node(s) will
survive the fencing race?
sym1 sym2 sym3
poe
>
~ y x
FencingWeight = 400 FencingWeight = 200 FencingWeight= 300
AL
syml only
B
sym2 only
c
sym3 only
D,
both sym2 and sym3
hat is the likely cause of this error?
Posted by seenagape on February 10, 2016 No comments
‘An administrator stopped Veritas Cluster Server (VCS) on the sym! node to remove it from
the cluster. When attempting to do this with the hasys -delete command from sym2, an error
message is displayed. What is the likely cause of this error?
A.
VCS must be completely shut down on all nodes,
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 161232iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
B
The vxfen daemon on sym1 is still running.
c
One or more SystemList attributes still contains sym1
D.
The GAB daemon on sym1 is still running.
How is the incident count for a new system managed in order to
avoid overwhelming the incident response team?
Posted by seenagape on February 10, 2016 No comments
How is the incident count for a new system managed in order to avoid overwhelming the
incident response team?
A.
Match count thresholds are set.
B.
More than one policy is enabled.
Cc.
Many incident responders are allowed access to the system.
D.
Incidents are auto-filtered to hide false positives.
Which command will allow the new node to start communicating
with the cluster?
Posted by seenagape on February 10, 2016 No comments
An administrator is adding a node to a running cluster. The administrator has successfully
installed Veritas Cluster Server and has configured and started LLT. Which command will
allow the new node to start communicating with the cluster?
AL
sh /ete/gabconfig
B.
hastart -force
c.
hastart
D.
gabconfig -c
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 172s2iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
Which directive in the /etc/Ilttab file must be updated?
Posted by seenagape on February 10, 2016 No comments
An administrator is merging two Veritas clusters that are already configured and running.
The two clusters are already sharing private interconnect networks. Which directive in the
Jetc/littab file must be updated?
A
Set-node
B
Set-mode
c
Set-system
D.
Set-cluster
Which line should be in the /etc/gabtab file to successfully start
the cluster?
Posted by seenagape on February 10, 2016 No comments
An administrator has removed a system from a running Veritas Cluster Server cluster so
that the cluster now only has seven nodes. The administrator must ensure the cluster will
start successfully after a complete cluster shutdown, Which line should be in the /ete/gabtab
file to successfully start the cluster?
A
clust start seed=7
B.
gabconfig start seed=7
C.
gabconfig -c -n7
D.
clust -c -n 7
What is an advantage of using a Dashboard report?
Posted by seenagape on February 10, 2016 No comm
What is an advantage of using a Dashboard report?
A.
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 181232iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
Incident reponders can execute Smart Responses from them
B
They allow incidents to be viewed across multiple products.
c
They can be used as work queues for incident responders.
D.
Incident responders can see the history of each incident.
Which Veritas Cluster Server command is used to override sta
resource type attribute values for a specific resource?
Posted by seenagape on February 10, 2016 No comments
Which Veritas Cluster Server command is used to override statie resource type attribute
values for a specific resource?
A
hatype
B.
hagrp
c.
haclus
D.
hares
Which resource attribute should be exclusively configured in
order to enable the Proactive Prevention of Concurrency feature
for the resource of type Application?
Posted by seenagape on February 9, 2016 No comments
A resource of type Application is configured to be monitored by the Intelligent Monitoring
Framework. Which resource attribute should be exclusively configured in order to enable
the Proactive Prevention of Concurreney feature for the resource of type Application?
A.
PidFiles
B.
MonitorProgram
c.
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 191232rera0%6 250-253 Archives - Page 2 of - Symantec Question & Answers
MonitorProcesses
D.
StartProgram
What should a system administrator do to stop a detection
server?
Posted by seenagape on February 9, 2016 No comments
What should a system administrator do to stop a detection server?
A
Access the Server Detail page and select “Stop”
B.
Access a command prompt and enter the command “net stop service VontuMonitor”
Cc.
Access the Enforce Server Detail page and select “Done”
D.
Access the services panel and stop the VontuMonitorController service
Which resource attribute value for the resource of type
CoordPoint needs to be modified...?
Posted by seenagape on February 9, 2016 No comments
The I/O fencing configuration for a Veritas cluster uses one Coordination Point (CP) server
and two local coordinator disks. There are two network connections between the cluster and
the CP server. A resource of type CoordPoint has been configured in the cluster using all
default resource attribute values. Which resource attribute value for the resource of type
CoordPoint needs to be modified so that the resource will fault only when both network
connections to the CP server fail even though the coordination disks are still accessible?
A.
FaultTolerance
B.
ToleranceLimit
c.
FencingTolerance
D.
FencingLimit
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 201232rera0%6 250-253 Archives - Page 2 of - Symantec Question & Answers
Which command allows the administrator to leave services
currently under Veritas Cluster Server control in a running state
while performing configuration changes?
Posted by seenagape on February 9, 2016 No comments
Which command allows the administrator to leave services currently under Veritas Cluster
Server control in a running state while performing configuration changes?
AL
hastop -all -evacuate
B.
haconf -all -force
c.
hastop -all -force
D.
haconf -all -evacuate
Explanation:
What is the likely cause of this issue?
Posted by seenagape on February 9, 2016 No comments
Offline configuration changes made to Veritas Cluster Server (VCS) are missing when
viewing it in one of the GUIs or the CLI. What is the likely cause of this issue?
A
VCS was started on the node where the changes were made.
B,
VCS was started on the node without the changes being made.
Cc
VCS was started on the node with the lowest priority in the SystemList.
D.
VCS was started on the node with the highest priority in the SystemList.
which command should be run to ensure the main.cf file has the
correct synta:
Posted by seenagape on February 9, 2016 No.
ts
mm
When making offline configuration changes, which command should be run to ensure the
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 211232iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
main.cf file has the correct syntax?
A.
hagrp —verify
B.
haclus —verify
c.
haconf verify
D.
hacf —verify
Explanation:
Which Veritas Cluster Server (VCS) utility is used to verify a
configuration file and can also be used by the VCS engine to load
a configuration file at runtime?
Posted by seenagape on February 9, 2016 No comments
Which Veritas Cluster Server (VCS) utility is used to verify a configuration file and can also
be used by the VCS engine to load a configuration file at runtime?
A
hacf
B.
haconf
c
haclus
D.
haverify
What is a likely outcome of filtering network traffic in Network
Monitor?
Posted by seenagape on February 9, 2016 No comments
What is a likely outcome of filtering network traffic in Network Monitor?
A.
monitoring of traffic important to the customer
B
decrease in the detection accuracy
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2! 221232iera0%6 250-253 Archives - Page 2 of 24 - Symantec Questions & Answers
c.
monitoring of outbound traffic before inbound traffic
D.
increase in Network Monitor demand for RAM
What should the administrator do after installing the agent
software on each as Cluster Server (VCS) nod
Posted by seenagape on February 9, 2016 No comments
An administrator needs to manually add a new resource type to a running cluster. What
should the administrator do after installing the agent software on cach Veritas Cluster
Server (VCS) node?
A.
Generate the appropriate hatype commands with hacf -addtype
B.
Use the hatype command to add the new resource type
c
Stop and restart VCS so that the new resource type is recognized as valid
D.
‘Use the hares command to add the new resource type to the cluster
Page 2 of 5«12345»
Questions & Answer collection
hntpsnw alotestking.comisymantecieategorylsnglelexam-250-253-administration-of-veras-cluster-server-6-0-or-unixlpagel2!
23123