Professional Documents
Culture Documents
Induction Melting Furnace are designed for maximum electrical efficiency using heavy
walled, high electrically conductive copper tubing. The furnaces can be used with ceramic
(non-conductive) crucibles or conductive crucibles such as graphite, clay graphite or
silicon carbide.
Heat On: This is utilized to turn on the force of the induction hardware. At the point when Ready sign is present,
all outing Indicators are Off and Emergency is discharged, squeezing HEAT ON catch turns ON the inverter and
force is then being supplied to the Coil.
Heat OFF: This will close off the force supply to the coil.
Reset: The catch will reset all outings and interlock markers.
Crisis OFF: Pressing this push-hook sort of catch discharges the empowering coil of the fundamental Breaker
while the 3-stage enter supply does not stream into the converter. The catch can be discharged by pivoting the
handle toward the bolt.
Power Control Pot: It gives a force reference to the control cards. This can be utilized to control the force of
the gear.
Vitality Meter: This meter demonstrates electrical parameters like voltage, currents, and vitality parameters.
Water Conductivity Meter: The meter has a LED-bar that gives the status of the DM water conductivity. A
scope of hues is utilized to give the status to the viewer. The green extent demonstrates that the water
conductivity is sheltered though the orange shading demonstrates that re-molding is in request as the water
conductivity is not up to the required norms. The red marker outlines unsafe levels of water conductivity and
suggests against the use of the hardware. The usefulness of the meter can be analyzed by squeezing the test
catch. When it is set to low, an excursion setting of 30 S is set up. Selecting the High choice will set the outing
setting to 50 S.
Advanced Temperature Meter: The meter is situated in the board; it gives the temperature of the DM water.
The meter is pre-set at an outing setting of 38 o C. Once subsequent to stumbling at 38 o C, it will naturally
reset itself when the temperature drop back to 36 o C as it were.
EL Inject: The segment is utilized to check the working of Earth Leakage framework falsely. A current around 23 An is infused misleadingly in the framework when the catch is squeezed and same can be confirmed in the EL
current showcase. While expanding the force pot, the current will step by step ascend to 10 A. This is empower
the client to check whether the EL current recognition framework is working at the set Leakage current.
Who we are ?
Stead Fast is a leading Induction Melting Furnace manufacturers in India and manufactured world class
induction melting furnaces under the brand name 'STEFEN'. STEFEN Quick melt and Smart melt furnaces are
designed to increase the customers profitability and improve his market credibility by minimizing down time.
Stead Fast is top among all Induction Furnace Manufacturers in India and are well known to provide world class
InductionHeating system and melting solutions for both ferrous and Non ferrous with a great focus on
customization so that every machine is nothing less than perfect.