: User t Manual |
HL-IKFx
SOLID STATE S00W HF BAND LINEAR AMPLI TRIER
fr lees
@ TOKYO HY-POWERGt
) Hi-1Kex/PEATURES
HL-IKFX is a compact and light weight desktop HF linear amplifier
with the maximum input power of 1.2kW. It covers all the amateur HF
bands including new WARC bands. Due to its solid-state broad band
design, most of HF frequency bands can also be covered as well as
amateur bands
Four units of Motorola MOS-FET MRF150 are used in the parallel
push-pull form. MRF150 is a reliable and high gain RF transistor
that is best suited for a low distortion, SSB amplification service.
Unlike the tube type amplifier, no tuning procedure is required ,even.
if the frequency band are changed. All you need is just to change the
band switch.
Duct structure is used for the cooling air flow in the power transistor
heat sink. This heat sink together with the forced air cooling system
makes the amplifier very compact and light weight.
‘The drain current (Id ) can be monitored all the time with the drain
current meter. Also, drain voltage ( Vd ), output power (PO) and
reflected power (Pr) can be monitored with the multi-function meter,
so that the each operating state can be always checked properly.
HL-1Krx works with AC power of 100V to 230V by changing the AC
input circuitry.
‘The interlocked safety system has been built in the cabinet. When the
upper cover is lifted, AC power will not be fed to the amplifier for the
safety of the operator.(2) SPECIFICATIONS
Frequency
Mode
RF Drive Power
RF Output Power
FET Drain Voltage
FET Drain Current
In/Out Impedance (Zin/out)
Final RF Power Transistor
Semiconductors Used
Amp. Circuitry
AC Power
Panel Meter Scales
In / Out connectors
Dimensions
Weight
Accessory Parts
Cooling Method
AC Power Consumption
HF Band (1.9 ~ 28 MHz Band)
SSB, CW (RITY, SSTV,AM,FM)
50-100W — ( 100W max. )
SOOW max. (For RTTY,SSTV, AM, FM, 250W max. )
53V_ (with no RF drive )
25A max.
S0ohms (unbalanced )
MRFIS0 x 4 (by Motorola )
IC 8pcs., Tr. 3pes., Diodes 26pes., LED 9pcs., FET 4pcs.
Class. AB Push-pull
AC 100/110/115/200/220/230V ( switch selectable )
Single Phase 12A (100V), or 6A (200V)max. (50/60H2)
Output Power Pf SO0W , Reflected Power Pr SOW
Drain Voltage Vd 53V, Drain Current Id 25A
‘Type SO - 239 (or M-J)
232 x 142 x 350 mm ( WxHxD )
approx. 14 kgs.
AC Power Cord, Coaxial Jumper Cable, RCA Plug,
‘Spare Fuse 8A (for 200V), 15 (for 100V) 2pes. ea.
Forced Air Cooling,
1,200W max. ( at TX )