Professional Documents
Culture Documents
Installation of Tie Down Plugs During Pdi
Installation of Tie Down Plugs During Pdi
TRIM
Bulletin Number
06-80-001
Subject Date
DESCRIPTION:
During the Pre Delivery Inspection (PDI) process for the 2006 MY Tucson and Sonata
vehicles, the tie down holes must be covered to prevent water leaks into the vehicle.
A set of plugs is being supplied in the vehicle’s glove box. The plugs are to be installed
to the tie down holes during normal PDI process.
The 2006 Tucson packet contains two rear tie down plugs. The 2006 Sonata packet
contains 4 plugs, two for the front and two for the rear. The two front plugs are larger
than the rear plugs.
Replacement plugs can be ordered through your facing Parts Distribution Center
(PDC).
84142-3K000 84143-3K000
Page 1 of 4
PARTS INFORMATION:
Sonata / Front
Plug - Front Side
84142-3K000
Member Drain
Tucson / Rear
Page 2 of 4
Technical Service Group
TRIM
Bulletin Number
06-80-001
Page 3 of 4
2. Install the plugs into the front tie down
openings.
Plug
WARRANTY INFORMATION:
Normal PDI claim entry applies using PDI Claim Entry Screen.
The installation of the tie down plugs should be performed concurrently with the “under
vehicle” damage inspection during the PDI process.
Page 4 of 4