Professional Documents
Culture Documents
1. Step 1
Set up the 2 1-gallon plastic containers next to each other and cut a 2-inch hole on the
side of each one so that they line up and face each other.
2. Step 2
Insert the piece of chamois into the PVC pipe so that it fills the entire diameter of the
pipe, and insert the pipe into the 2 holes you cut out of the plastic containers.
3. Step 3
4. Step 4
Attach the alligator clips to the 12V or 24V power system and to the wire that is
running to the titanium electrodes.
5. Step 5
Place a titanium electrode in each 1-gallon plastic container, and make sure the
contact between the alligator clips and the wire running to the electrodes remain out of
the water.
6. Step 6
Fill the containers with water from your faucet and turn on the power adapter. This
initiates the ionizing process.
7. Step 7
Wait at least 2 hours and watch as the water separates into the 2 containers. The
water in one container will turn brown and murky while the water in the other container
will be clear and clean. Once the ionizing process is complete, the brown water is the
acidized water and the clear water is the alkalinized water.
Tips & Warnings
You can employ one of several methods to build your own water ionizer, but they all
depend on the same techniques to ionize the water. Some methods use different
materials, so use the method that relies on materials you already have on hand.
A home-built ionizing system will take significantly longer to ionize the water than a
commercial system, since you are using smaller electrodes and a lower power
source.
Building your own water ionizer can be a difficult process for the mechanically
challenged, and exposes you to electrical current and water. Be careful and know
exactly what you're doing before you build.