Professional Documents
Culture Documents
Dc bias condition
If the DC bias collector
current is set at one-half the
possible signal swing
(between 0 and Vcc/Rc), the
largest collector current
swing will be possible. If the
quiscent collector-emitter
voltage is set on one half the
supply voltage the largest
voltage swing will be
possible.
AC Bias Operation
A small input signal will
cause the output voltage
to swing to a maximum of
Vcc and a minimum of 0V.
The current can also
swing from 0 mA to ICSAT
(Vcc/RC)
Po(ac) = Ic^2(rms)Rc
P (ac)=( V^2 (rms))/Rc
Efficiency
The maximum efficiency is at maximum output and
current swings.
It is 25% for a Class A amplifier Maximum Efficiency