Professional Documents
Culture Documents
Unigraphics Interview Questions: Ug - Convert - Part - in
Unigraphics Interview Questions: Ug - Convert - Part - in
• Questioner
1) What is NX?
NEXT
2) What are the versions of UG?
-UG-18,NX/2, NX/3,NX/4,NX/5
3) How many types of modeling are in UG?
-Solid, Surfacing, sheet metal,
4) How many types of co-ordinate system are in UG?
-WCS, CSYS,MCS
5) Which is better option to mirror- Instance or Transform?
–Mirror-instance: its associative.
6) How to remove parameters, by keeping model intact and how to retrieve it back?
-Edit->feature->remove parameter.
7) How to find center of gravity of the model?
-Analysis->mass property
8) How to modify model created in inches to millimeters?
-Go to dos command in NX- ug_convert_part –in <file name>
9) How to create your own user-defined symbol?
-File ->utility->create custom symbol.
10) How do you represent weld in part model.
-
11) What are the necessary things to be incorporated in complete final drawing?
12) How do you confirm whether the sketch is fully constrained / parts in assembly are fully mated?
-Message shows in que line.
13) Tell some options of section in freeform features?
-End-apex-shoulder , End-slopes-shoulder , fillet-shoulder ,three-point-arc,
Ends-apex-rho,five-points.
14) What is the use of simple in thru curve?
When using the Simple option, the tolerance values (Distance Tolerance and Angle Tolerance) are ignored.
By requesting a simple surface, you are asking that the generating curves be refit to reflect the degree and
segmentation of the template. The system does the best refit it can to those constraints and builds the
surface directly from the refitted curves.
-
15) What is the use of reducing patches in surfacing?
-
16) What is the use of spine in thru curve mesh and swept?
-Shape controls.
17) Which are the options in fff to which we r defining spine
18) What are the maximum strings that we can use in thrucurve, thru curve mesh, swept?
-thrucurve, thru curve mesh -150 , swept-3,
19) How to reduce the no of decimal places of dimensions that appear in information window?
-preference<sketch<decimal places
20) What is dual dimensioning?
-It shows combine mm & inches
21) What does parametric modeling mean?
-Its Editable,associative
22) How do you taper 1/4th of a face?
23) What is the use of associative point in sketch?
-To control the sketch.
24) How to change the profile of sketch with out deleting any entities?
Prepared by: -
Prudvi Raj
UNIGRAPHICS INTERVIEW QUESTIONS
• EXPLAIN:-
1. Gateway
2. B-surface.
3. Global Shaping.
4. Anchor point or apex point
5. Macro.
6. Faceted Representation.
7. Visible in view.
8. Timestamp.
9. Ordinate Dimension.
10. Pattern and group features.
11. Law curve.
12. Poles, segments, knots
13. How to check Deviations
14. What is the use of Assembly wait managament
15. How to check interference in assembly
16. What is the use of Delay interpart Update
17. Heal Geometry
18. Extention Files for Dxf/Dwg, iges, parasolid, udf, jpeg.
19. Use Of view Operation origin
20. How to draw Dimensions, annotations, etc. to model
21. View Dependent Edit
22. Can it is possible to link Geometry to Model from Drafting or Vice versa
23. Feature Model parameters
24. How to represent Hole Dia & Cylindrical Dia
25. Product outline, isolate Component
26. Part List, Attributes,
27. Types Of Dimensioning
28. Types of Constraints
29. How many types layers.Why
30. Master model Consept
31. Non-master part
32. How to Display Detailed Threading in Drafting
33. Name Some Utility Symbols
34. How Many Number Of Icons in Preference Annotation
35. How to Create User Defined Views
36. How to convert Block to Sphere
37. Give Dimensions For U Slot in UG
Prepared by: -
Prudvi Raj
UNIGRAPHICS INTERVIEW QUESTIONS
• Difference: -
Prepared by: -
Prudvi Raj
UNIGRAPHICS INTERVIEW QUESTIONS
Prepared by: -
Prudvi Raj