Professional Documents
Culture Documents
ICS 77.140.01
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Not to be reproduced without the permission of Last date for receipt of
BIS or used as STANDARD comments is 10 07 2008
Chemical Composition
NOTES
Microalloying elements like Nb, V, Ti and B shall be added singly or in combination. Total microalloying elements shall not be more
than 0.3%.
Alloying elements such as Cr, Ni, Mo and Cu shall be added singly or in combination and shall not be more than 0.5% for E 600 and
0.60% for E 650.
Mechanical Properties
(1) (2) (3) (4) (5) (6) (7) (8) (9 ) (10) (11)
E 550 - 650 550 530 520 12 3.0t 3.5t 25 15
E 600 - 730 600 580 570 12 3.5t 4.0t 25 15
E 650 - 780 650 630 620 12 4.0t 4.5t 25 15
NOTES
1 Bend test not required for thickness 40 mm and above.
2 For Charpy Impact testing, test temperature may be mutually agreed between manufacturer and
the purchaser. Otherwise it is at the discretion of the manufacturer to select any one test
temperature.
1
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.