Professional Documents
Culture Documents
Course Name: MCTL 110D NAME: Nathaniel James 8/04/10 Operation Sheet Instructor: Christopher Modeste ID# 109003720
Course Name: MCTL 110D NAME: Nathaniel James 8/04/10 Operation Sheet Instructor: Christopher Modeste ID# 109003720
8/04/10
Operation Sheet
ID# 109003720
No. Operation process of hammer Head Materials
1 Secure a piece of mild steel dia 26 x 60 mm Hacksaw ,ruler scriber.
2 Setup lathe for facing Lathe wrenches
3 Reset lathe for centre drilling Centre drill
4 Drill a hole 4mm deep
5 Reset lathe for turning between centres
6 Turn down to 25 dia
7 Remove work piece and mark again. Ruler,scriber.
8 Reset the lathe for rough turning
9 Rough turn down to dia 14x16mm Vernier caliper
10 Finish turn down to dia 12x16mm
11 Remove work piece and rough turn the other end
12 Rough turn down to dia. 14x16mm
13 Finish turn down to dia 13x16mm