Professional Documents
Culture Documents
htm
Bearings: Flanges, Blocks Ball, AC, Pillow Block, Flange+more 2, 3 and 4 Bolt,Stamped,metric bore www.sasbearings.c
HPI Racing Models World legend race car models! Visit here and see our line-up www.hpimodelcar.com/
Mashiq XBRL reporting View, analyse, and publish custom financial reports from xbrl. Free. www.mashiq.com
A8 74 x 52 mm 2.9 x 2.0 in
A9 52 x 37 mm 2.0 x 1.5 in
4A0 & 2A0 aren't formerly defined by ISO 216 but are commonly used for
oversized paper. The origin of these formats is in the German DIN 476
standard, that was the original base document from which ISO 216 was
derived.
ISO 216 specifies tolerances for the production of A series paper sizes as
follows:
A Series Paper Sizes Chart.
±1.5 mm (0.06 in) for dimensions up to 150 mm (5.9 in)
±2 mm (0.08 in) for lengths in the range 150 to 600 mm (5.9 to 23.6 in)
±3 mm (0.12 in) for any dimension above 600 mm (23.6 in)
1 of 2 10/7/2010 4:34 PM
Dimensions Of A Paper Sizes - A0, A1, A2, A3, A4, A5, A6, A7, A8, A9... http://www.papersizes.org/a-paper-sizes.htm
The A series paper sizes are defined in ISO 216 by the following requirements:
Note: The last item is there because the root 2 aspect ratio doesn't always give a whole number.
2 of 2 10/7/2010 4:34 PM