Professional Documents
Culture Documents
Measurements Form
Measurements Form
Item Number =
If you send actual body measurement, we will add appropriate margin and send it back for
approval. If you specify final dress measurement, it is always preferred.
A1 - Shoulder length (to be measured from the backside – place the measuring tape across
your shoulder and measure it from one edge to other. =
A2 - Chest (all round) – place the tape around your chest, right at the bust point and then,
take the relaxed measurement. =
A3 - Waist (all around) =
A4 - Hip (all around) =
A5 - Total Desired Shirt Length =
Lengths – place the tape at the joint of your shoulder at neck and drop the other edge
downwards and check the following: -
A6.1 - Distance upto your bust point =
A6.2 - Distance upto your waist point =
A6.3 - Distance upto your hip point =
A7 - Arm Hole =
A8 - Sleeve Length =
A9 - Sleeve Opening =
A10 - Front Neck Drop – place the tape on your shoulder would begin (approx. at the point
where your neckline would begin) and measure the distance (towards your chest) in a start
and advise the neck depth you like) =
A11 - Back neck drop - place the tape on your shoulder would begin (approx. at the point
where your neckline would begin) and measure the distance (towards your chest) in a start
and advise the neck depth you like) =
A12 - Side slit length in shirt =
A13 - Neck Design – Please follow the attachments
Bottom
Specify if you want a salwar, churidaar or pant style. =
Place the tape at your waist (where you tie your salwar / pajama) and drop the other edge
downwards and check the following: -
For Salwar:
- Total length desired =
- Leg Opening near the ankle (All around) =
Regards,
Nikita