Page 1 of 1
Covington, Tameka (PHMSA) oak
From: Burton, Dwayne [Dwayne_Burton@kindermargan.com]
Sent: Monday, August 17, 2009 8:59 PM.
To: Huntoon, Ivan (PHMSA): Bunn, James (PHMSA)
Ce: Mayberry, Alan (PHMSA); Nanney, Steve (PHMSA); Torres, Jorge
Subject: FW: REX EAST Bainbridge to Hamilton - Magpie deformation data
Attachments: REX_EAST_Bainbridge to Hamilton 42in.pdf
Ivan and Jim,
‘The attached file is a summary of the 42" OD variation that was identified in the “high resolution’ deformation too!
fun on REX East from the Bainbridge, IN compressor station to the Hamilton, OH compressor station near the
“Lebanon, OH Hub.
"Note that there is only one pipe joint greater than 1% Nominal OD variation. Itis a 42°X .888 wt 5LX70 joint that
measured at 1.07% Nominal OD variation. This joint is in an HDD in a class 1, non-HCA location,
We have completed the maps that show where the .5 design pipeline is on REX East. These files are greater
than what your firewall wll accept; therefore, we are sending the maps to you on a disc via FedEX. You should
have the discs in your office by 10°30 am COST on Wednesday, 8/16/2000,
| will be revising the request to move to .8 design MAOP pressure to include the REX East pipeline from Mexico,
MO to Hamilston, OH. will include the information that Alan Mayberry hes identified as required for the
authorization. You can expect the revised request yet this week.
Thanks,
Dwayne Burton
Kinder Morgan Energy Partners, LP
713-369-9356 office
1/8/2010