Professional Documents
Culture Documents
Bipod
Additional
6mm PPC
VARMINT STAINLESS STEEL
24” Varmint kit, Stainless Steel Barrel, 1-10 twist . . . . . . . . . . . . . . . . . . . . . . . . . $590
Bipod
Additional
16" BARREL WITH FULL LENGTH A2 HANDGUARDS & RIFLE SIGHTING RADIUS,
SPECIAL GAS BLOCK DESIGN ASSURES PROPER GAS SYSTEM OPERATION
ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVER
E.R. Shaw manganese phosphate finish chrome moly or polished stainless steel heavy barrel
Forged front sight base with lug - Round A2 handguard with heat shield - Gas tube
A2 or A3 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)
Ejection port cover - Forward assist assembly - Charging handle
Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard
Lower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced
Specify AR15 or M16 - No FFL required - Void where prohibited by law
16" DISSIPATOR A2 or A3
5.56mm NATO/.223 Remington
Chrome Moly Barrel, 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . . . . . . . . $510
For Chrome Lined Chamber and Bore add $35
Stainless Steel Barrel, 1-8 or 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . . $560
20" STANDARD A2 or A3
5.56/.223 Chrome Moly Barrel, 1-9 twist, A1 or A2 Flashider. . . . . . . . . . . . . . . . . $460
For Chrome Lined Chamber and Bore add $35
5.56 Chrome Lined Government Profile Barrel, 1-7 twist, A1 or A2 Flashider . . $510
STAINLESS STEEL
20" STANDARD A2 or A3
5.56mm NATO/.223 Remington
Stainless Steel Barrel, 1-8 or 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . . $510
Fluted Stainless Steel Barrel, 1-8 or 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . $560
20" OCMP A2
5.56mm NATO/.223 Remington
Chrome Moly Heavy Barrel, 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . $600
Krieger .223 Stainless Steel Barrel 1-7.7 twist, A1 or A2 Flashider . . $895
Page 6 MODEL "1" SALES Tel: 903-546-2087
ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVER
E.R. Shaw manganese phosphate finish chrome moly or polished stainless steel heavy barrel
Forged front sight base with lug - Round A2 handguard with heat shield - Gas tube
A2 or A3 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)
Ejection port cover - Forward assist assembly - Charging handle
Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard
Lower receiver parts set - A2 buttstock - Upper half fully assembled, gauged and headspaced
Specify AR15 or M16 - No FFL required - Void where prohibited by law
7.62x39mm
20" STANDARD A2 or A3
Chrome Moly Barrel, 1-10 twist, A2 Flashider . . . . . . . . . . . . . . . . . . . . . . . . . . . . $510
24" STANDARD A2 or A3
5.56mm NATO/.223 Remington
Chrome Moly Barrel, 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . . . . . . . . $460
STAINLESS STEEL
24" STANDARD A2 or A3
5.56mm NATO/.223 Remington
Stainless Steel Barrel, 1-8 or 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . . $510
Fax: 903-546-6346 www.model1sales.com Page 7
ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVER
E.R. Shaw 16" manganese phosphate finish chrome moly or polished stainless steel heavy barrel
Forged front sight base with lug - C.A.R. handguard with heat shield - 4 position C.A.R. stock
A2 or A3 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)
Gas tube - Ejection port cover - Forward assist assembly - Charging handle
Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard
Lower receiver parts set - Upper half fully assembled, gauged and headspaced
Specify AR15 or M16 - No FFL required - Void where prohibited by law
16" C.A.R. A2 or A3
5.56mm NATO/.223 Remington
Chrome Moly Barrel, 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . . . . . . . . $460
For Chrome Lined Chamber and Bore add $35 SEE PAGE 14 FOR
OPTIONS & UPGRADES
STAINLESS STEEL
16" C.A.R. A2 or A3
5.56mm NATO/.223 Remington
Stainless Steel Barrel, 1-8 or 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . . $510
LIGHTWEIGHT BARREL
16" C.A.R. A2 or A3
5.56mm NATO/.223 Remington
Lightweight Chrome Moly Barrel, 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . $460
For Chrome Lined Chamber and Bore add $35
Page 8 MODEL "1" SALES Tel: 903-546-2087
ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVER
Specify AR15 or M16 - No FFL required - Void where prohibited by law
.300 Fireball
16" C.A.R. A2 or A3
Chrome Moly Barrel, 1-8 twist, A2 Flashider . . . . . . . . . . . $510
7.62x39mm
16" C.A.R. A2 or A3
Chrome Moly Barrel, 1-10 twist, A2 Flashider. . . . . . . . . . . $510
SEE PAGE 14 FOR
OPTIONS & UPGRADES
NEW! 9mm
16" C.A.R. A2 or A3
Chrome Moly Barrel, 1-15 twist, A2 Flashider . . . . . . . . . $685
XM177 STYLE A2
Shown with Full Slot Flashider
and optional 6 position M-4 stock
XM177 STYLE A3
Shown with optional LE buttstock
EM-4 A3
Shown with optional LE buttstock
EM-4 C.A.R. A2 or A3
5.56mm NATO/.223 Remington
16" EM-4 Chrome Moly Barrel, 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . $510
16" EM-4 Chrome Moly Barrel, 1-9 twist, Phantom Flashider . . . . . . . . . . . . . . . . $540
14 1/2" EM-4 Chrome Moly Barrel, 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . $510
The 14 1/2" EM-4 kit is for full auto or registered short barrel rifles – NFA RULES APPLY
For Chrome Lined Chamber and Bore add $35 (Not available with Phantom flashider)
SEE PAGE 14 FOR
OPTIONS & UPGRADES
M-16 COMMANDO A2 or A3
5.56mm NATO/.223 Remington
10 1/4" Chrome Moly Barrel, 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . $470
11 1/2" Chrome Moly Barrel, 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . $470
For Chrome Lined Chamber and Bore add $35
7.62x39mm
M-16 COMMANDO A2 or A3
11 1/2" Chrome Moly Barrel, 1-10 twist, A2 Flashider . . . . . . . . . . . . . . . . . . . . . $520
NEW! 9mm
M-16 COMMANDO A2 or A3
10 1/4" Chrome Moly Barrel, 1-15 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . $685
11 1/2" Chrome Moly Barrel, 1-15 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . $685
Page 12 MODEL "1" SALES Tel: 903-546-2087
ALL KITS ARE COMPLETE - LESS STRIPPED LOWER RECEIVER
E.R. Shaw manganese phosphate finish chrome moly barrel - Forged front sight base with lug or gas block
Gas tube - C.A.R. handguard with heat shield - 7 1/2" kits come with free float tube only
A2 or A3 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)
Ejection port cover - Forward assist assembly - Charging handle - Pistol recoil buffer assembly
Complete bolt and carrier assembly - Aluminum delta ring, mag catch button and trigger guard
Lower receiver parts set - Upper half fully assembled, gauged and headspaced
Specify AR15 or M16 - No FFL required - Void where prohibited by law
Pistol Kits are for pistol lowers or full auto only - All NFA rules apply SEE PAGE 14 FOR
OPTIONS & UPGRADES
PISTOL A2 or A3
5.56mm NATO/.223 Remington
7 1/2" Chrome Moly Barrel, 1-9 twist, A1 or A2 Flashider, Free Float Tube . . . . . $495
10 1/4" Chrome Moly Barrel, 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . $485
11 1/2" Chrome Moly Barrel, 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . $485
For Chrome Lined Chamber and Bore add $35
7.62x39mm
PISTOL A2 or A3
11 1/2" Chrome Moly Barrel, 1-10 twist, A2 Flashider . . . $510
9MM A3
Shown with optional Four Rail Handguard NEW! 9mm
PISTOL A2 or A3
7 1/2" Chrome Moly Barrel, 1-15 twist, A2 Flashider, Free Float Tube . . . . . . . . . $695
10 1/4" Chrome Moly Barrel, 1-15 twist, A2 Flashider . . . . . . . . . . . . . . . . . . . . . $685
11 1/2" Chrome Moly Barrel, 1-15 twist, A2 Flashider . . . . . . . . . . . . . . . . . . . . . $685
Fax: 903-546-6346 www.model1sales.com Page 13
XM177 STYLE KITS
Complete Kits
COMMANDO KITS
DISSIPATOR KITS
STANDARD KITS
PISTOL KITS
• N/A = Not Available
C.A.R. KITS
• Inc = Included
• Chrome Bolt and Carrier
available in 5.56/.223 only
Add Threaded Muzzle $35 $35 Inc Inc Inc Inc Inc Inc Inc
Add Versa-Pod Bipod $55 $55 $55 $55 $55 $55 $55 $55 $55
Add Harris Swivel Model Bipod $85 $85 $85 $85 $85 $85 $85 $85 $85
Add Harris Swivel Bipod with Rail Adapter $105 $105 $105 $105 $105 $105 $105 $105 $105
Add Swivel Stud $10 $10 $10 $10 $10 $10 $10 $10 $10
Add Removable Carry Handle, STD or NM, A3 $75 $75 $75 $75 $75 $75 $75 $75 $75
Add YHM Removable Rear Sight, A3 $45 $45 $45 $45 $45 $45 $45 $45 $45
Add M1S B.U.I.S. Removable Rear Sight, A3 $75 $75 $75 $75 $75 $75 $75 $75 $75
Add SIngle Removable Rear Sight, A3 $65 $65 $65 $65 $65 $65 $65 $65 $65
Add 4 Aperture Removable Rear Sight, A3 $65 $65 $65 $65 $65 $65 $65 $65 $65
Add YHM Flip Front Sight, Picatinny $65 $65 $65 $65 $65 $65 $65 $65 $65
Add YHM Flip Front Sight Tower, A3 N/A N/A $75 $75 $75 $75 $75 $75 $75
Add YHM Flip Rear Sight, A3 $75 $75 $75 $75 $75 $75 $75 $75 $75
Add MI Flip Front Sight, Picatinny $75 $75 $75 $75 $75 $75 $75 $75 $75
Add MI Flip Rear Sight, A3 $85 $85 $85 $85 $85 $85 $85 $85 $85
Substitute NM Rear Sight, A2 N/A N/A $35 $35 $35 $35 $35 $35 $35
Substitute NM Front Sight, A2 N/A N/A $8 $8 $8 $8 $8 $8 $8
Substitute NM Front Sight Base, A2 N/A N/A $25 $25 $25 $25 $25 $25 $25
Substitute Steel Gas Block Sight Base, A3 Inc Inc N/C N/C N/C N/C N/C N/C N/C
Substitute 2 Rail Gas Block Sight Base, A3 N/A N/A $35 $35 $35 $35 $35 $35 $35
Substitute 4 Rail Gas Block Sight Base, A3 N/A N/A $38 $38 $38 $38 $38 $38 $38
Substitute PRi Gas Block Sight Base, A3 N/A N/A $160 $160 $160 $160 $160 $160 $160
Substitute Low Profile Gas Block, A3 N/A N/A $25 $25 $25 $25 $25 $25 $25
Substitute Stippled Hard Plastic Grip $20 $20 $20 $20 $20 $20 $20 $20 $20
Substitute PSG1 Style Plastic Grip $25 $25 $25 $25 $25 $25 $25 $25 $25
Substitute ERGO SG Grip, RH, LH or Ambi $20 $20 $20 $20 $20 $20 $20 $20 $20
Substitute ERGO Rigid Grip, RH, LH or Ambi $17 $17 $17 $17 $17 $17 $17 $17 $17
Substitute ERGO Tactical Standard Grip $35 $35 $35 $35 $35 $35 $35 $35 $35
Substitute ERGO Tactical Deluxe Grip $45 $45 $45 $45 $45 $45 $45 $45 $45
Substitute Sierra Precision Grip $25 $25 $25 $25 $25 $25 $25 $25 $25
Substitute Green Furniture $20 $20 $20 $20 $20 $20 $20 $20 $20
Substitute OCMP Free Float Handguard N/A N/A N/A $100 N/A N/A N/A N/A N/A
Substitute Aluminum Free Float Tube Inc Inc $25 $25 $25 N/A $25 $25 $25
Substitute YHM Free Float 4 Rail Handguard $140 $140 $140 $140 $100 $100 $100 $100 $85
Substitute YHM 2 Pc Free Flt 4 Rail Hndgrd N/A N/A $170 $170 $127 $127 $127 $127 N/A
Substitute MI 2 Pc Free Float 4 Rail Hndgrd $230 $230 $230 $230 $160 $160 $160 $160 $140
Substitute MI 2 Pc Extended 4 Rail Hndgrd N/A N/A N/A N/A $155 $155 $155 $155 N/A
Substitute Predator Free Float N/A N/A $240 $240 $210 N/A $210 $210 N/A
Substitute LE Buttstock N/C N/C N/C N/C N/C N/C N/C N/C N/A
Substitute A2 Buttstock Inc Inc Inc Inc N/C N/C N/C N/C N/A
Substitute 4 Position CAR Stock N/C N/C N/C N/C Inc Inc N/C Inc N/A
Substitute 4 Position Aluminum CAR Stock $35 $35 $35 $35 $35 $35 $35 $35 N/A
Substitute 6 Position M-4 Stock $25 $25 $25 $25 $25 $25 INC $25 N/A
Substitute ACE M4 SOCOM Stock $145 $145 $145 $145 $145 $145 $145 $145 N/A
Substitute ACE ARFX Skeleton Stock $50 $50 $50 $50 $50 $50 $50 $50 N/A
Substitute ACE ARFXE Skeleton Entry Stock $75 $75 $75 $75 $75 $75 $75 $75 N/A
Substitute 5 Position VLTOR Stock, Bk/Grn/Tn $145 $145 $145 $145 $145 $145 $145 $145 N/A
Substitute YHM Skeletonized Stock $50 $50 $50 $50 $50 $50 $50 $50 N/A
Substitute MagPul PRS Adjustable Stock $210 $210 $210 $210 $210 $210 $210 $210 N/A
Substitute Chrome Bolt & Carrier $50 $50 $50 $50 $50 $50 $50 $50 $50
Substitute Young NM Chrome Bolt & Carrier $100 $100 $100 $100 $100 $100 $100 $100 $100
Substitute Extended Latch Charging Handle $3 $3 $3 $3 $3 $3 $3 $3 $3
Substitute Wook ambi Ext Latch Charging Hndl $6 $6 $6 $6 $6 $6 $6 $6 $6
Substitute Tactical Latch Charging Handle $9 $9 $9 $9 $9 $9 $9 $9 $9
Substitute Badger Ext Latch Charging Handle $14 $14 $14 $14 $14 $14 $14 $14 $14
Add Threaded Muzzle $35 $35 Inc Inc Inc Inc Inc Inc Inc
Add 5.56/.223 Bolt Carrier Group
and Charging Handle $100 $100 $100 $100 $100 $100 $100 $100 $100
Add 5.56/.223 Bolt Carrier Group & Charging Handle
with Chrome Bolt and Carrier $150 $150 $150 $150 $150 $150 $150 $150 $150
Add 5.56/.223 NM Bolt Carrier Group & Charging Handle
with Young Chrome Bolt and Carrier $200 $200 $200 $200 $200 $200 $200 $200 $200
Add 6.8mm Rem SPC Bolt Carrier Group
and Charging Handle N/A $120 N/A $120 $120 N/A $120 N/A N/A
Add 9mm Bolt Carrier Group and
Charging Handle N/A N/A N/A N/A $120 N/A N/A $120 $120
Add 7.62x39mm Bolt Carrier Group
and Charging Handle N/A N/A N/A $110 $110 N/A N/A $110 $110
Add Standard Charging Handle $16 $16 $16 $16 $16 $16 $16 $16 $16
Add Extended Latch Charging Handle $19 $19 $19 $19 $19 $19 $19 $19 $19
Add Wook Ambi Ext. Latch Charging Hndl $22 $22 $22 $22 $22 $22 $22 $22 $22
Add Tactical Latch Charging Handle $25 $25 $25 $25 $25 $25 $25 $25 $25
Add Badger Ext. Latch Charging Handle $30 $30 $30 $30 $30 $30 $30 $30 $30
Add Versa-Pod Bipod $55 $55 $55 $55 $55 $55 $55 $55 $55
Add Harris Swivel Model Bipod $85 $85 $85 $85 $85 $85 $85 $85 $85
Add Harris Swivel Bipod with Rail Adapter $105 $105 $105 $105 $105 $105 $105 $105 $105
Add Swivel Stud $10 $10 $10 $10 $10 $10 $10 $10 $10
Add Removable Carry Handle, STD or NM, A3 $75 $75 $75 $75 $75 $75 $75 $75 $75
Add YHM Removable Rear Sight, A3 $45 $45 $45 $45 $45 $45 $45 $45 $45
Add M1S B.U.I.S. Removable Rear Sight, A3 $75 $75 $75 $75 $75 $75 $75 $75 $75
Add SIngle Removable Rear Sight, A3 $65 $65 $65 $65 $65 $65 $65 $65 $65
Add 4 Aperture Removable Rear Sight, A3 $65 $65 $65 $65 $65 $65 $65 $65 $65
Add YHM Flip Front Sight, Picatinny $65 $65 $65 $65 $65 $65 $65 $65 $65
Add YHM Flip Front Sight Tower, A3 N/A N/A $75 $75 $75 $75 $75 $75 $75
Add YHM Flip Rear Sight, A3 $75 $75 $75 $75 $75 $75 $75 $75 $75
Add MI Flip Front Sight, Picatinny $75 $75 $75 $75 $75 $75 $75 $75 $75
Add MI Flip Rear Sight, A3 $85 $85 $85 $85 $85 $85 $85 $85 $85
Substitute NM Rear Sight, A2 N/A N/A $35 $35 $35 $35 $35 $35 $35
Substitute NM Front Sight, A2 N/A N/A $8 $8 $8 $8 $8 $8 $8
Substitute NM Front Sight Base, A2 N/A N/A $25 $25 $25 $25 $25 $25 $25
Substitute Steel Gas Block Sight Base, A3 Inc Inc N/C N/C N/C N/C N/C N/C N/C
Substitute 2 Rail Gas Block Sight Base, A3 N/A N/A $35 $35 $35 $35 $35 $35 $35
Substitute 4 Rail Gas Block Sight Base, A3 N/A N/A $38 $38 $38 $38 $38 $38 $38
Substitute PRi Gas Block Sight Base, A3 N/A N/A $160 $160 $160 $160 $160 $160 $160
Substitute Low Profile Gas Block, A3 N/A N/A $25 $25 $25 $25 $25 $25 $25
Substitute Green Handguard N/A N/A $20 $20 $20 $20 $20 $20 $20
Substitute OCMP Free Float Handguard N/A N/A N/A $100 N/A N/A N/A N/A N/A
Substitute Aluminum Free Float Tube Inc Inc $25 $25 $25 N/A $25 $25 $25
Substitute YHM Free Float 4 Rail Handguard $140 $140 $140 $140 $100 $100 $100 $100 $85
Substitute YHM 2 Pc Free Flt 4 Rail Hndgrd N/A N/A $170 $170 $127 $127 $127 $127 N/A
Substitute MI 2 Pc Free Float 4 Rail Hndgrd $230 $230 $230 $230 $160 $160 $160 $160 $140
Substitute MI 2 Pc Extended 4 Rail Hndgrd N/A N/A N/A N/A $155 $155 $155 $155 N/A
Substitute Predator Free Float N/A N/A $240 $240 $210 N/A $210 $210 N/A
Bipod
Additional
16" BARREL WITH FULL LENGTH A2 HANDGUARDS & RIFLE SIGHTING RADIUS,
SPECIAL GAS BLOCK DESIGN ASSURES PROPER GAS SYSTEM OPERATION
Complete barrel assembly with E.R. Shaw manganese phosphate finish chrome moly heavy barrel
Forged front sight base with lug - Round A2 handguard with heat shield - Gas tube
A2 or A3 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)
Ejection port cover - Forward assist assembly - Aluminum delta ring
Upper half fully assembled, gauged and headspaced
No FFL required - Void where prohibited by law
Complete barrel assembly with National Match Forged front sight base with lug
OCMP free float handguard - Gas tube - Aluminum delta ring
A2 forged hardcoat anodized upper with mil-spec Teflon coating and National Match front & rear sight
Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced
No FFL required - Void where prohibited by law
STAINLESS STEEL
24" STANDARD A2 or A3 5.56mm NATO/.223 Rem
Stainless Steel Barrel, 1-8 or 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . . $365
Fax: 903-546-6346 www.model1sales.com Page 19
Complete barrel assembly with E.R. Shaw manganese phosphate finish chrome moly heavy
barrel or polished stainless steel heavy barrel - Forged front sight base with lug
C.A.R. handguard with heat shield - Gas tube - Aluminum delta ring
A2 or A3 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)
Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced
No FFL required - Void where prohibited by law
SEE PAGE 15 FOR
OPTIONS & UPGRADES
STAINLESS STEEL
16" C.A.R.A2 or A3 5.56mm NATO/.223 Rem
Stainless Steel Barrel, 1-8 or 1-9 twist, A1 or A2 Flashider . . . . . . . . . . . . . . . . . . $365
9MM A3
Shown with optional Four Rail Handguard
and YHM Folding Forward Grip
Complete barrel assembly, E.R. Shaw 11 1/2" manganese phosphate finish chrome moly barrel
Welded 5 1/2" flashider - Forged front sight base with lug - C.A.R. handguard with heat shield
A2 or A3 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)
Ejection port cover - Forward assist assembly - Aluminum delta ring - Gas tube
Upper half fully assembled, gauged and headspaced
No FFL required - Void where prohibited by law
Shown with
Phantom Flashider
11 1/2" A2 or A3 7.62x39mm
Chrome Moly Barrel, 1-10 twist, A2 Flashider . . . . . . . . . . . . . . . . . . . . . . . . . . . . $350
7.62x39mm
20" STANDARD A2 or A3
Chrome Moly Barrel, 1-10 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . $510
Shown with
optional welded Muzzle Brake
16" DISSIPATOR A2 or A3
5.56mm NATO/.223 Remington
Chrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . . $510
For Chrome Lined Chamber and Bore add $35
Chrome Moly Barrel, 1-9 twist, welded Muzzle Brake . . . . . . . . . . . . . . . . . . . . . $545
STAINLESS STEEL
16" DISSIPATOR A2 or A3
5.56mm NATO/.223 Remington
Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . $560
16" C.A.R. A2 or A3
5.56mm NATO/.223 Remington
Chrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . . $460
Lightweight Chrome Moly Barrel, 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . $460
For Chrome Lined Chamber and Bore add $35
Chrome Moly Barrel, 1-9 twist, welded Muzzle Brake . . . . . . . . . . . . . . . . . . . . . $495
Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . $510
Fluted Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . . . . . $560
.300 Fireball
16" C.A.R. A2 or A3
Chrome Moly Barrel, 1-8 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . . . . . . . $510
Shown with
optional
welded
Muzzle Brake
STAINLESS STEEL
16" DISSIPATOR A2 or A3 UPPER HALF 5.56mm NATO/.223 Rem
Stainless Steel Barrel, 1-8 or 1-9 twist, 11° Target Crown . . . . . . . . . . . . . . . . . . $430
Complete barrel assembly with E.R. Shaw 11 1/2" manganese phosphate finish chrome moly barrel
Welded 5 1/2" mock flashider - Forged front sight base without lug - Gas tube
C.A.R. handguard with heat shield - Aluminum delta ring
A2 or A3 forged hardcoat anodized upper with mil-spec Teflon coating and rear sight (A2 only)
Ejection port cover - Forward assist assembly - Upper half fully assembled, gauged, headspaced
No FFL required - Void where prohibited by law
Manufactured by CZ - Compatible with any AR15 lower - Match quality 16 1/2" barrel
Knurled free float tube - Picatinny top rail upper for scope mounting - Picatinny gas block
Comes complete with 10 round .22LR magazine
No FFL required - Void where prohibited by law
16" 1-8 or 1-9, threaded muzzle, bayo lug. . . $215 16" 1-9.5 twist, threaded muzzle, bayo lug . . $215
20" 1-8 or 1-9, threaded muzzle, bayo lug. . . $215 16" 1-9.5 twist, 11° target crown, no lug. . . . $215
24" 1-8 or 1-9, threaded muzzle, bayo lug. . . $215 20" 1-9.5 twist, threaded muzzle, bayo lug . . $215
20" 1-9.5 twist, 11° target crown, no lug. . . . $215
Chrome Lined Chamber/Bore . . . . . . add $35
16" 1-8 or 1-9, 11° target crown, no lug . . . . $215 E.R. SHAW CHROME MOLY EM-4
20" 1-8 or 1-9, 11° target crown, no lug . . . . $215 6.8mm Remington SPC
24" 1-8 or 1-9, 11° target crown, no lug . . . . $215
KRIEGER STAINLESS STEEL 24" 1-12 twist, mil-spec 1913 steel gas block . $300
.223 Rem / OCMP LEGAL
E.R. SHAW STAINLESS STEEL EXTRA HEAVY BULL
6mm PPC Caliber
National Match
Front Sight
With four set screws . . . . . . $35
KNS Precision
YHM Front Sights
Rail Standard Body
Standard
1. 2.
1. 2. 3. 4. 5. 6.
1. Threaded muzzle brake . . . . . . . . . . . . $25
2. Threaded steel muzzle brake. . . . . . . . $25
3. Threaded titanium muzzle brake . . . . $65
3. 4. 5. 6. 7. 8. 4. 3-1/4” threaded muzzle brake . . . . . . . $35
5. Set screw steel muzzle brake . . . . . . . $25
Flash Hiders 5.56mm 6. Set screw aluminum muzzle brake . . . $25
1. A1 birdcage flash hider . . . . . . . . . . . . . $8
2. A2 birdcage flash hider . . . . . . . . . . . . . $8
3. Phantom C7 flash hider . . . . . . . . . . . . $25 Wedge Muzzle
4. Phantom flash hider . . . . . . . . . . . . . . . $25 Brake . . . . $25
4. Phantom flash hider, 1/2 x 36 TPI . . . . $35
5. Reverse flash hider. . . . . . . . . . . . . . . . $18
6. 5-1/2” flash hider with holes . . . . . . . . $20 9mm A1 or A2
7. 5-1/2” flash hider with slots . . . . . . . . $15
8. 5-1/2” flash hider with full slots . . . . . $45 Flash Hider . . . . . $20
Removable Flip
PRI Flip Front Sight Rear Sights
Gas Block . . . . . . . $179 Four Aperture . . . . . . . . . . . . . . . . . . . . $85
.750 diameter crossbolt Single Aperture . . . . . . . . . . . . . . . . . . . $85
Fax: 903-546-6346 www.model1sales.com Page 37
Forged Upper Receivers
Hardcoat Anodized - Mil-spec Teflon Coating
CAR Stock
Lock Ring . . . $3
CAR Stock
Lock Plate . . . $3
Gapper . . . $3
Fills the void in front
of the pistol grip.
Pivot pin offset - Colt . . . . . . . . . . . $5.00
Pivot pin offset bushing-Colt . . . . . $5.00
1. Standard recoil spring . . . . . . . . . . . $3.00 15. Disconnector, AR15 . . . . . . . . . . . . . $5.00
1. CAR recoil spring . . . . . . . . . . . . . . $3.00 15. Disconnector, M16. . . . . . . . . . . . . . $5.00
2. Standard buffer . . . . . . . . . . . . . . . $12.00 16. Pistol grip screw . . . . . . . . . . . . . . . . $ .75
2. CAR buffer. . . . . . . . . . . . . . . . . . . $10.00 17. Pistol grip star washer . . . . . . . . . . . $ .75
2. Colt CAR buffer, heavy . . . . . . . . . $35.00 18. Pistol grip, A2, black . . . . . . . . . . . . . $6.00
2. Colt 2H buffer . . . . . . . . . . . . . . . . $45.00 18. Pistol grip, A2, OD green. . . . . . . . . $8.00
3. Standard buffer tube . . . . . . . . . . . $12.00 19. Safety selector detent spring . . . . . . $ .75
3. CAR buffer tube . . . . . . . . . . . . . . $15.00 20. Safety selector detent . . . . . . . . . . . $ .75
4. Safety selector, AR15 . . . . . . . . . . . $12.00 21. Hammer and trigger pins . . . . each $ .75
4. Safety selector, M16 . . . . . . . . . . . . $12.00 21. Anti-walk hammer & trigger pins set of 2 $3.00
5. Bolt catch detent spring. . . . . . . . . . $ .75 22. Takedown pin. . . . . . . . . . . . . . . . . . $4.00
6. Bolt catch detent . . . . . . . . . . . . . . . $ .75 23. A2 stock spacer . . . . . . . . . . . . . . . . $2.00
7. Bolt catch . . . . . . . . . . . . . . . . . . . . . $6.00 24. Hammer, AR15 . . . . . . . . . . . . . . . . $15.00
8. Bolt catch roll pin. . . . . . . . . . . . . . . $ .75 24. Hammer, M16. . . . . . . . . . . . . . . . . $15.00
9. Mag catch . . . . . . . . . . . . . . . . . . . . . $4.00 24. Hammer, 9mm . . . . . . . . . . . . . . . . $25.00
10. Take down detent spring . . . . . . . . $ .75 25. Hammer spring . . . . . . . . . . . . . . . . $1.00
11. Take down detent. . . . . . . . . . . . . . . $ .75 Auto sear, M16. . . . . . . . . . . . . . . . $15.00
12. Mag catch spring. . . . . . . . . . . . . . . . $ .75 Auto sear pin, M16 . . . . . . . . . . . . . . $ .75
13. Mag catch button, aluminum . . . . . . $2.00 Mag catch assembly . . . . . . . . . . . . . $6.00
14. Pivot pin, 1/4”. . . . . . . . . . . . . . . . . . $4.00 Bolt catch assembly . . . . . . . . . . . . . $8.50
14. Pivot pin, 1/4” w/ball bearing detent . . $5.00
Pivot pin detent . . . . . . . . . . . . . . . . $ .75 Lower Receiver Parts Kits
Pivot pin spring . . . . . . . . . . . . . . . . . $ .75 AR15 parts kit . . . . . . . . . . . . . . . . . . . . $59.00
14. Pivot pin, 5/16” w/ball bearing detent . $5.00 M16 parts kit, with sear . . . . . . . . . . . . $69.00
KNS Perma-Pin
Firing pin retainer, replace cotter pin . . . . . . $8
A2
Stock
Padded ACE ARFX
Cheekrest $20
Skeleton Stock
Standard . . . . . . . . . . . . $90
LE
Tactical Stock
Complete with buffer, spring.
Black . . . . . . . . $50 / Green . . . . . . . . $55 ACE ARFX-E
Entry Stock . . . $100
Fiberlight
CAR Stock ACE M4 SOCOM
Complete with buffer, spring, Five position adjustable
in 4 position collapsible or fixed.
Long . . . . . . . . . . . . . . . . . . . . . . . . . $210
Black . . . . . . . . . $42 / Green . . . . . . . $52
Short . . . . . . . . . . . . . . . . . . . . . . . . $190
Aluminum CAR Stock
Black, complete with buffer, spring,
in 4 position collapsible or fixed . . . . $85
Yankee Hill
Pistol Recoil Buffer . . . . . . . $45 Skeletonized Stock . $69
Page 42 MODEL "1" SALES Tel: 903-546-2087
Available for Ironstone
AR15 or AR10 Sportsman
MagPul PRS Buttstock $250
Stock slips over the standard extension tube.
Field Precision Stock Butt plate moves up and down, cants clockwise
Adjustable for height and length of pull, includes or counter clockwise and moves in or out for
all mounting hardware and two ambi sling loops. adjusting length of pull.
Black or OD Green, Made in USA . . . . . . $250
Ironstone NRA
Competition
Buttstock . . $325
Includes special extension tube. Ergonomic
VLTOR design, quick and easy adjustable length of pull,
weight, drop and cant. Mounts without modifi-
Carbine ModStock cation to receiver or charging handle.
With 2 long accessory compart-
ments, buffer and spring . . . . . $155
VLTOR Rubber
Delta Style Cheek Pieces
Recoil Pad
Slips over ModStock buttplate,
Black, OD or Tan. . . . . . . . . $20
C.A.R. Cheek M-4 Cheek
Viking Rubber Piece . . . $25 Piece . . . $25
Recoil Pads Delta Style
C.A.R. Stock. . $10
M-4 Stock . . . $15
Cheek Piece . . $50
Ribbed Rubber
Recoil Pads
C.A.R. Stock. . $12
M-4 Stock . . . $16 Pro
Cheek
Piece . . . $55
SOG Rubber Star
Recoil Pad Cheek
Black, OD or Tan . . . . . . . . $20 Piece . . . $60
Fax: 903-546-6346 www.model1sales.com Page 43
Standard A2
Pistol Grip
ERGO GRIPS
Black . . . . . . . $6 ERGO ERGO
Green . . . . . . $8 4011X 4095
LH $24 Trap Door
$12
ERGO
Trapdoor Grip ERGO 4055 Tactical
Rubber Plug . . . . . $5 Deluxe Sure Grip $60
Standard Handguard
Two piece, with heatshield, black. . . . $20
Two piece, with heatshield, green . . . $25
C.A.R. Handguard
Two piece, with heatshield, black. . . . $15
Two piece, with heatshield, green . . . $20
M-4 Handguard
Two piece, with heatshield, black. . . . $25
Two piece, with heatshield, green . . . $30
Midwest Industries
Two Piece Free Float Forearm
Mil-Std rails, T-marked, 6061 hard coat
Pistol Length . . . . . . . . . . . . . . . . . . $40 anodized, monolithic look upper rail.
C.A.R. Length . . . . . . . . . . . . . . . . . $40 MCTAR23 - Pistol length. . . . . . . . . $160
Standard Length . . . . . . . . . . . . . . . $40 MCTAR20 - Carbine length. . . . . . . $180
MCTAR22 - Full length . . . . . . . . . . $250
Midwest Industries
Modular Rail
YHM Free Float 4 Rail Handguards Handguard
C.A.R. length . . . . . . . . . . . . . . . . . . $120 C.A.R. length . . . . . . . . . . . . . . . . . . $281
Standard length . . . . . . . . . . . . . . . . $159 High Rise Rail Attachment. . . . . . . . . $16
YHM 2 Piece
Four Rail
Handguard
C.A.R. length . . . . . . . . . . . . . . . . . $147
Standard length . . . . . . . . . . . . . . . . $190
YHM Dovetail
SOG Flashlight Angle Mount
$15
Rail Mount $29
Midwest Industries
Standard
Aimpoint Ring
Hardcoat anodized 6061 alu-
minum billet, co-witness com-
patible for rear mounted
back-up sight . . . . . . . $143
One PieceScope Mount
Built-in rings, 1" or 30mm . . . . . . . . . $65 Midwest Industries
Cantilever
Aimpoint
A2 Mount . . . . . . . . . . . . . . . . . . . $8 Ring
Hardcoat
anodized
6061 aluminum billet, height compatible with
rear mounted night vision monocular . . $194
Rail Mount
Tactical QD Front Sling
Web Sling . . . . . . . . . . . . . . . . . . $24 Adapter . . . . $33
QD Rear
Sling Adapter
for M-4 6-position
buttstock . . . . . $40
Leather CAR/M4
Sling Stock End Plate Adapters
Natural . . . $25
Slot . . . . . . . . . . . . . . . . . . . . . . . . . . . $36
Loop . . . . . . . . . . . . . . . . . . . . . . . . . . $35
Page 48 MODEL "1" SALES Tel: 903-546-2087
KNS Rear Sling Mount Harris
Replaces rear sling loop . $13.50
Bipods
KNS Front Series S
Sling Mount Swivel
Attaches through vent Model
hole of standard handguards
$13.50
BRM . . . . . . . . $78
LM . . . . . . . . . $85
CAR Stock 25C . . . . . . . . $95
Tactical Plate Adapter . . . . . $12
1001. . . . . . . . $14
Versa-Pod
Bipod
CAR Stock $65
Tactical Plate
1004 . . . . . . . . . . . . $14
CAR Stock
Tactical Plate
1004L . . . . . . . . . . . $14 GI
Bipod
$12
CAR Stock
Tactical Plate AR Brass Deflectors
1004R . . . . . . . . . . . $14 For A3 Flattop. . . . $21
For Removable Carry
CAR Stock Handle . . . . . . . . . . $21
Tactical Plate For A2 Carry Handle . . . . . $21
1005L . . . . . . . . . . $14
Brass Catcher
For A3 flattop, with zip-
pered mesh bag . . . $20
CAR Stock
Tactical Plate Brass
1005R . . . . . . . . . . $14
Catcher
for A2 Upper
$15
CAR Stock
Tactical Plate Wook
1002R . . . . . . . . $14 Brass Catcher
for A3 flattop . . . . . . $35
Fax: 903-546-6346 www.model1sales.com Page 49
PRI 6.8mm
SPC Mags
10 Round . . . . $41
15 Round . . . . $41
25 Round . . . . $43
C-MAG
100 Round Drum 7.62x39mm
Includes C-MAG 100 round drum maga- Mags
zine, personal loader, black pouch, manual, 5 Round . . . . $13
screwdriver and tube of graphite. 10 Round . . . $16
.223/5.56mm C-MAG Drum . . . . $239
9mm C-MAG Drum . . . . . . . . . . . $289
.223/5.56 Caliber
ProMag 9mm 32 Round Mag
G.I. Magazines Each . . . . . . . . . . . . . . . . . . . . . . . . . . $22
20 Round . . . . . . . . . $15
30 Round . . . . . . . . . . . . . . . . . $15 LULA AR Mag
Loader/Unloader
30 Round Makes loading/unloading
5.56mm fast and easy . . . . . . $23
Mags $19
ArmaLite 10 Round Mags Rubber MagPul
5.56mm and .300 Fireball . . . . . . . . . $20 For .223 caliber mags
Pack of 3 . . . . . . . . . . . . $9
ProMag
.223 Mags
5 Round . . . . . $20
20 Round. . . . $20
30 Round AR
Mag Springs
Pack of 3 . . . . . . . . . . . . . . . . . . . . . . . $9
M7 Bayonet & Scabbard
Green Mag GI Contract . . . . . . . . . . . . . . . . . . . . $35
Follower . . . . . . $1.25
30 Round Mag Rebuild Kit
1 spring, 1 floorplate, 1 follower . . $4.50
MagPul
Followers M9 Bayonet & Scabbard
Self Leveler GI Contract - Lancay . . . . . . . . . . . . . $85
3 Pack . . . $6.50 GI Contract - Ontario. . . . . . . . . . . . $85
Page 50 MODEL "1" SALES Tel: 903-546-2087
Otis Cleaning Kits
5.56mm M4/M16 Soft Pack Cleaning Kit
Soft Pack Case with Alice Clips, NATO Adapter, Obstruction Remover,
Bore Reflector, C.L.P., Slotted Tip, Gas Port Pick, Cotton Swabs, Female
Rod Handle, Male Rod Handle, 5.56mm Bore Brush, .35 Cal Bore
Brush, Nylon End Brush, 5.56mm Patches, 30" Memory Flex Rod, 8"
Memory Flex Rod, Short AP Brush, Brass Scraper,T-Handle, 1/2 oz Lens
Cleaner, Lens Cloth, Mohair Lens Brush . . . . . . . . . . . . . . . . . . $118
MEUSOC .45 Cal Soft Pack Cleaning Kit
Soft Pack Case with Alice Clips, Nylon End Brush, Pin Punch, NATO
Adapter, Bore Reflector, Panoply Patches, 1/2 oz C.L.P., 8" Memory Flex
Cable, Female Rod Handle, T-Handle Base, Slotted Tip, Brass Scraper, .45 Cal Nylon Brush, .45 Cal
Bronze Brush, Short AP Brush, Gas Port Pick, 8" Cable with .30 Cal Tip . . . . . . . . . . . . . . . . . . . $84
9mm Pistol Military Issue Soft Pack Cleaning Kit
Soft Pack Case with Alice Clips, Mini Nylon End Brush, NATO Adapter, 9mm Nylon Bore Brush, 9mm
Brass Bore Brush, C.L.P. Break Free, 8" Memory Flex Cleaning Rod, 8" Memory Flex with 9mm Tip,
Panoply Patches, Female Rod Handle, Pistol T-Handle Base, Slotted Brass 9mm Tip, Short Receiver
Brush, Brass Pick, Pin Punch, Brass Scraper, Bore Reflector . . . . . . . . . . . . . . . . . . . . . . . . . . $84
5.56mm M4/M16 Buttstock Cleaning Kit
Includes 1/2 oz Solvent, 30" Memory Flex Cleaning
Rod, Bore Reflector,T-Handle, NATO Adapter,
Pipe Cleaners, Bore Brush, 2" Patches, Slotted Tip,
Chamber Rod, Double End A/P Brush, Obstruction Remover . . . . . . . . . . . . . . . . . . . . . . . . $46
Punch
Set . . . $15 Barrel Wrench . . . . . . . . . . . . . . $33
C.A.R.
Stock Wrench . . . $5
Armorers C.A.R.
Stock Wrench . . . $15 G.I. Barrel Wrench . . . . . . . . . . $8
Aluminum Handguard
Vice Jaws Removal Tool . . . . . . $24
$15
A1/A2 Combo
Sight Tool . . . . . . . . . . . . . . . . . . $10
Armorer's
Action
Block Pivot Pin Detent
$35 Installation Tool . . . . . . . . . . . . . . $5
Pivot Pin Detent
Removal Tool . . . . . . . . . . . . . $5
Lower Receiver
Action Block $15
Order Both and Save Bore Guide Cleaning Tool . . $25
Lower Receiver Action Block
and Armorer's Action Block . . $45 Lee Reloading Die Set
Broken Shell Extractors 6.8mm Rem SPC
.223 Caliber . . . . . . . . . . . . . . . . . . . $8 $25
7.62x39mm. . . . . . . . . . . . . . . . . . . . $8
Borebrush, G.I. . . . . . . . . . . . . . . . $1
Chamber Brush . . . . . . . . . . . . . . $2
Gas Tube Cleaner Pack of 20 . . . $5
Gas Tube Cleaner Pack of 50 . . . $9 AR Field Repair Kit . . . . . . . . . . $25
.223 Cleaning Patches Buttstock Cleaning Kit . . . . . . $12
1,000 for . . . . . . . . . . . . . . . . . . . . $4.75 Belt Cleaning Kit . . . . . . . . . . . . $15
Page 52 MODEL "1" SALES Tel: 903-546-2087
Breech Rod Guide
Guides cleaning rod straight into barrel,
with O-ring seal that prevents oil/debris
Deluxe AR15/M16 from running back into action.
.223 Cal AR15/M16 . . . . . . . . . . . . . . $20
Lug Recess Cleaning Kit .308 Cal AR10 . . . . . . . . . . . . . . . . . . $23
Includes chamber cleaning rod, lug recess
cleaning head, Delrin sleeve, 50 cotton
cleaning rolls, chamber brush, chamber
Delrin
mop and double ended nylon cleaning Muzzle Guide
brush . . . . . . . . . . . . . . . . . . . . . . . . . $27 Protects muzzle end
while guiding cleaning
AR15/M16 Cleaning Rod rod straight into barrel. AR15/M16 with
flashider . . . . . . . . . . . . . . . . . . . . . . $6.50
Conversion Kit
Converts 8/32
female cleaning
rod into bolt lug
recess cleaning .50 Caliber
tool. Kit includes No-Harm Bronze Brush
lug recess clean- With brass core . . . . . . . . . . . . . . . $1.85
ing head, Delrin sleeve and 50 cotton
cleaning rolls . . . . . . . . . . . . . . . . . . . $12
.30 Caliber
One Piece Cleaning Rod No-Harm Bronze Brush
.22 cal rod with ball bearing handle, nylon With brass core . . . . . . . . . . . . . . . $1.85
coated, .22 cal jag included.
24" Cleaning Rod . . . . . . . . . . . . . . . . $24
36" Cleaning Rod . . . . . . . . . . . . . . . . $26
.22 Caliber
No-Harm Bronze Brush
With brass core . . . . . . . . . . . . . . . $1.85
.50 Caliber
Chamber Cleaning Rod
Featuring a fixed handle with a 17" solid
brass shaft . . . . . . . . . . . . . . . . . . . . . $19
AR15/M16 Chamber Brush
8/32 thread . . . . . . . . . . . . . . . . . . . $3.75
8/36 thread, USGI . . . . . . . . . . . . . . $2.00
AR15 .223 Caliber
Chamber Cleaning Rod
Fixed handle with 9.5" solid brass shaft, Double Ended Nylon Brush
includes chamber cleaning brush. . . . $13 $2.00
Fax: 903-546-6346 www.model1sales.com Page 53
HOLOgraphic
Weapon Sight
The EOTech uses state-of-the-art
digital electronics design. Twenty
brightness levels ensure proper
brightness control in either low light
or very bright sunlight. An on-board
microprocessor provides automatic
battery check indicator, up/down
brightness scrolling and programma-
ble auto shutdown features.All elec-
tronics are fully encapsulated in
shock absorbing resin compound.
The holographic patterns have been designed to be instantly visible in any light, instinctive to
center regardless of shooting angle, and to remain in view while sweeping the engagement
zone. Reticles are designed as large, see-through patterns to achieve lightning quick reticle to
target acquisition without covering or obscuring the point of aim.
SPECIFICATIONS Specifications are subject to change