Professional Documents
Culture Documents
05 Up Chrysler 300 License Plate Installation Manual
05 Up Chrysler 300 License Plate Installation Manual
Installation Instructions
1. Install the license plate nuts (white plastic inserts) into the square openings in the stain-
less steel license plate bracket.
1 2. Install the black edge guard around the edge of the stainless steel license plate bracket.
3. Align the E&G stainless steel front license plate bracket centered under the grille.
4,5 2,3 4. Use a 3/32” drill bit to drill through the holes in the license plate bracket and through
the bumper cover.
5. Install the license plate bracket using the supplied countersunk phillips screws.
1 IMPORTANT: DO NOT OVERTIGHTEN THE SCREWS OR YOU WILL STRIP OUT THE
HOLES !
6. Install front license plate onto the bracket using the factory screws to finish (not
shown).