Professional Documents
Culture Documents
FACULTY OF ENGINEERING
UNIVERSITY PUTRA MALAYSIA
Lab Sheet 5:
Dimensioning & Tolerancing
Thread, Fastener & Spring
INSTRUCTORS:
Dr. Fairuz Izzuddin Romli
Mr. Shahadatuliskandar Rosli
1. Lab Objectives
a) To produce the drawing of an object with correct dimensioning rules
b) To produce the different types of drawing for threads, fasteners and springs
2. Lab Tasks
Step 1: Follow lab demonstration to produce and complete the drawing below according to
the dimensioning rules.
Step 2: Follow lab demonstration to produce a drawing of the following types of threads:
a) UN/UNR Threads
b) Square Threads
c) Acme Threads
Step 3: Follow lab demonstration to produce a drawing of the following types of springs:
a) Compression spring
b) Extension spring
3. Lab Assignment
Based on your lab exercises, produce the following drawings with appropriate
dimensioning:
a) Produce three-view drawing for the following objects and dimension them.
Total Mark – 60 (P09, PO14)
Submit your drawings (to be prepared in appropriate format) during class on 16/3/2011.
Late submission will be subject to a penalty in your marks.