Professional Documents
Culture Documents
FACULTY OF ENGINEERING
UNIVERSITY PUTRA MALAYSIA
Lab Sheet 6:
Cross-Sectional View
Complete 2-D Drawing
INSTRUCTORS:
Dr. Fairuz Izzuddin Romli
Mr. Shahadatuliskandar Rosli
1. Lab Objectives
a) To produce cross-sectional drawing of an object
b) To produce a complete 2-D drawing of a given object
2. Lab Tasks
Step 1: Follow lab demonstration to produce the following cross-sectional views of the
given object.
Step 2: Follow lab demonstration to produce the complete 2-D drawing and the cross-
sectional views of the following object.
3. Lab Assignment
(a) Produce the complete 2-D drawing of the following objects. Also produce the cross-section
drawing through the cutting plane Y-Y. Make use of proper dimensioning rules.
(b) Draw a complete 2-D drawing and produce appropriate cross-section drawing to highlight
the features of the object using of proper dimensioning rules.
(c) Draw a complete 2-D drawing and produce appropriate cross-section drawing to highlight
the features of the object. Each box is 1mm x 1mm. Make use of proper dimensioning
rules.
Total Marks – 50 (PO9, PO14)
Submit your drawings (to be prepared in appropriate format) during class on 30/3/2011.
Late submission will be subject to a penalty in your marks.