Professional Documents
Culture Documents
LAB NO 3 (A):
Do-D7:
this is a bi directional data bus which receives control word and data.
Reset:
a high on the pin force 8251 in reset status.
Wr :
used for writing transmit data and control word in to 8251IC.
Rd :
used for sending and receiving data from 8251IC.
C/D:
used for selecting data or control word when C/D=0 data will be accessed and
when C/D=1 control word will be accessed.
CS:
(chipselect) used for selecting 8251IC.
TxD:
transmit data from which serial converted data is sent out.
TxRDy:
it indicate that 8251IC is ready to accept a transmit data character.
Txempty:
it indicates that 8251IC has transmitted all data and has no more data.
TxC:
it is a clock signal which determined the transfer speed of transmitted data.
RxD:
ANEEB AHMED KHAN CE09-139
RxRDy:
it indicates that 8251IC contains character that is ready to send.
RxC:
it determines the transfer speed and receives data.