REINFORCED CONCRETE
SQUARE PILE
SCIB CONCRETE MANUFACTURI
a
A
sidiary of Sara
jalaysla SecuritQuality Assured Factory Production
SCM piles are manufactured under factory controlled conditions with
management and supervision by highly qualified professionals, thus
ensuring the highest product quality and reliability. SCM pile factory
carry SIRIM's certification under their quality system registration
MS ISO 9001: 2000.
Wide Range of Pile Size
SCM piles ate produced in sizes ranging from 150mm to 400 mm.
square with various load carrying capacities to suit different design
teria. This wil allow the selection of the optimum and economical
piling solutions to all foundation problems.
Wide Range of Pile Length
SCM piles come in various easily transportable lengths to be jointed
(on site to suit requirements. The flexibility in determining total pile
length will cut wastage to a minimum.
High Load Carrying Capacities
With the use of high compressive strength concrete of more than
45 MPa, SCM piles allow for heavier driving conditions in hard soil
strata and have higher load carrying capacity for more economical
design of foundation.
Generally SCM piles are designed and manufactured according to Malaysia Standard MS 1314: 2004,
Special design to BS 8004: 1986 and BS 8110: 1997 can be provided
1. Materials
Cement Ms 522 Part 1: 1989 Ordinary Portland Cement
Aggregate/Sand BS 882 1992 ‘10mm, 20mm granite, washed river / mining sand
Main Bars Ms 146 1988 High Tensile Deformed Bars
BS 4449 1997
Links: Bs 4449 1997 Mild Stee! Round Bars
Joint Plate/Skirt Plate Bs 4360, 1990 Mild Stee! Plate Grade 434
2, Joint
SCM Square Pile comes with mild steel plate joints that are butt welded at site
3. Pile Shoe
‘The pile shoe shall be either Flat Mild Steel Plate, Standard X-shoe, or JKR Standard pile shoe
SECTIONAL PROPERTIES OF SCM RC SQUARE PILES
Pile Size Cross Section Area Perimeter Section Modulus
mm x mm mm? mm mm? (X10)
150 x 150 22,500 600 0.60
175x175 30,625 700 = 0.95
200 x 200 40,000 800 1.44
250x 250 62,500 1000 2.84
300 x 300) 90,000 fe 1200 4.96
350x350 122,500 1400 7.92
400 x 400 160,000 1600 11.91
CALCULATION FOR ALLOWABLE AXIAL LOADS
‘The Recommended Axial Working Load (Safe Working Load) of the pile is calculated in accordance to British Code of Practice
CP 114 and BS 8004
Safe Working load = 0.275 f,, x A. + 0.551, x4,
hharacteristic Strength of Concrete at 28 Days
rea of Main Reinforcement
Characteristic Yield Strength of Steel (With 0.55 f, not exceeding 175N/mrn!)ECIFICATIONS
"AVAILABLE LENGTH OF REINFORCED CONCRETE SQUARE PILE (m SPECIFICATIONS (M.S. 1314: PART 3: 2004 STANDARD) FOR CLASS S
SCE) M5314 1955 NS 1314. 204
standacd RESCaeT | ASCs? | Class [Class] [Chas PILE REINFORCEMENT DETAILS
i le Sae | Nain Ranforcemert ‘eral narfocenent
marin noe/ Oa Wie Sia [PU ed [cred |_F2 Gm) [VU [3 Go
+ Use Dou ns at Pile Eds
‘SPECIFICATIONS (M.S. 1314: PART 6: 2004 STANDARD)
PILE REINFORCEMENT DETAILS ‘STRUCTURAL DETAILS AND CAPACITY
cs. | ple Sze | Main Renfocerent aural Reforcerent le See Concrete | Concrete | * Reconenended | Noninal | Recommended
sss | mmamm |" nes/ Di. | Wte Se and] Pr my |X imme (om) [ Yim | PSD D Gade | Cover | Anal Working | Weight | Homer Weight
Tso rs0[ ari a TF eo some | em Mea | “rm * ie t
Te ari a ore 8587 cu Es t
T8O3T a0 a i ee
T75a 175] a0 ii 45 coy #
* Use Double inks at ile rds z
* These recommended ail working load te only the stucura capac of les.
The actual working capaci ae dependant on Sl candons and other considerations but shall ot exceed the
recommended al werting oad
‘STRUCTURAL DETAILS AND CAPACITY (FOR RCS CLASS 1 & 2)
See Dineen | Concete | Concwt | *Rewonmended | Nominal | Reanmended
DT] oe [P| Gra | cover | Aca Woning | Wt | Harner eight
smmemm | mm | mem | am | ‘Nira_| ‘rm . in t NTIATED!
era a 7% a
vsxi7s] ms |e wa] «5 | 30 35 aoe | 08-13 Cows | Bue nate | Ancraper| Comeing ar [STIR | cota | Pain Se
wa reins | Thetnes
+ Tee recommendd aia orting at onthe suc act of les [mice] wr) oa nat |rstin [oi] eng |e. [tena] Ties
“re actus wong tances dependant ono condor an othe Consdetatonsbat shel ot xed he sor |e cea (esata tena ea ead leech me
rmconmene anal were ad ww TET | [ele oe |
3 | teas | +
[——___o nT rae DETAIS HORS CASS TEL i
FieSee | Cone
Cove | taste | Andonge ar | Conng or MERE] cata | pans
Fricke] wet] Dia. tenth Poston |Do.| Leng | Da. [Lagtn| Times | Tres
co
"
a
7
coe de | a oes ela |" | A ,
[soso 6 [10350 1-5 [ 1 o-|
[sr spe 10-350 —sr oeSPECIFICATION
SPECIFICATIONS (M.S. 1314: PART 3: 2004 STANDARD) FOR CLASS J
PILE REINFORCEMENT DETAILS
le Se | Nain Ranorcerent Lateral Reinforcement
srminm_| "05/03, Wie Sze end_[-Pr owed [cron [Fz wm) [Vid | 3
‘SPECIFICATIONS (M.S. 1314; PART 3: 2004 STANDARD) FOR CLASS M
PILE REINFORCEMENT DETAILS
Fie Sze | Wain Ranforcement " z
smmarm_|__tos/ a, cs A
‘Use Double inks at Pe Ens "7 Ue Doe Ink at Pl Ends
‘STRUCTURAL DETAILS AND CAPACITY ‘STRUCTURAL DETAILS AND CAPACITY
Pe See ‘Concete| Concrete | * Recommended | Noninal | Reconmrended ‘Concete | Concrete | * Reconmended | Noninal | Recormmended
Grade | Cover | AualWerting | Weidht | Hamner Weight Geade | Cover | Anal Working | Weight | Homer Weight
nmxmm Mex | tom t ‘im ‘ Mee_| ram ‘ ve t
* Concrete covers measured to min Bas * These recommended asl wortng lads are ony the sacral capac files.
* These recommended xl wong loads are ony he structural apacty of ples. ‘The actual wrking capodes are dependant on sol cantons an ater considerations but shal not exceed the
‘The actual worn cade are dependant on sol conten another cosideatons but sal not exceed the recommended avi working oad
‘recommended ail working oe.
Pie See | Cone
Cover | ase Fae | Anchorage Bar| Centering Bar [WSUS] Copar
[ricknes] wth] Jeng [Postion [ova | Length | via. [tenain] Thine
aHeght
Fiesee | Conc]
‘Cover | ae Flate | Anchorage Br | Centering Sor | WS Tbe
ines wath Di Length Poston [oi |_tength | Di. [Length
ww [Le |Z vel |e | we fiw |e | dae wee |ONAL DETAILS
Ms un
Ms un
ws m
mii p Meee rE ibis ven
f oa. | on
_——— a aa
(ENE ONT PLATE [eS
‘SECTIONAL VIEW ’
tc
a hag lA
SECTION 11
| Lene mac ne re
View 2-2
VIEW 3.3
View 4-4PILE SHOE
Rr keeo ace
aaa ea sae eal
kg eed ee
asa) anid
Solid Cast Iron Reena io
CR CR a
SSHONERRE
eee Teese eel
Pointed MS Plate Pile Shoe Pointed Cast Iron Shoe
aay ida
Oslo Point
Sea eclon SCIB Specification
ora eed Standard X-Shoe
any
It’s our policy to continuously review and improve products and their design. Information in
Cena
Be eee cee ancy
Your Local Distributor
Lot 1258, Jalan Utama, Pending Industrial Estate,
ome EE Cen eI
SORE EE UE OEE
Be Net ers
SONCRETE | contact person: Mr. cho Yew Kay
oS Ces
BERHAD Ms. Shirley Tin
cece