Professional Documents
Culture Documents
Meaning
The alarm indicates that an unlocked WCDMA cell has been blocked for
some reason, and it cannot transmit any traffic. This alarm is set
only when a cell is moved to the blocked state by the system,
meaning that a user initiated state change will not cause this
alarm.
The alarm is set when BTS has failed to accept the parameters
send to it during cell setup or when BTS has not responded to the
parameter sending during cell setup.
The RSI message regarding HSDPA disabling can arrive also after the
whole cell is reported as "disabled" by BTS via another RSI message.
This can happen in BTS recommissioning phase when the cell is
disabled
in the BTS end as part of the BTS maintenance operations. In this
case
this alarm can appear together with the alarms for the same WCEL
object:
7761 RNW O&M SCENARIO FAILURE
7771 WCDMA CELL OUT OF USE