Professional Documents
Culture Documents
Denon D-M37 Owner's Manual
Denon D-M37 Owner's Manual
RCD-M37
Owner’s Manual
Manuel de l’Utilisateur
Manual del usuario
ENGLISH FRANCAIS ESPAÑOL
CAUTION
INSTRUCTIONS openings with items, such as newspapers, tablecloths, curtains,
etc.
1. Read these instructions.
RISK OF ELECTRIC SHOCK 2. Keep these instructions. • No naked flame sources, such as lighted candles, should be
3. Heed all warnings. placed on the unit.
DO NOT OPEN • Observe and follow local regulations regarding battery disposal.
4. Follow all instructions.
• Do not expose the unit to dripping or splashing fluids.
CAUTION: 5. Do not use this apparatus near water.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE 6. Clean only with dry cloth. • Do not place objects filled with liquids, such as vases, on the
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. 7. Do not block any ventilation openings. unit.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Install in accordance with the manufacturer's instructions.
The lightning flash with arrowhead symbol, within an equilateral 8. Do not install near any heat sources such as radiators, heat registers, stoves, ATTENTION:
triangle, is intended to alert the user to the presence of or other apparatus (including amplifiers) that produce heat. • La ventilation ne doit pas être gênée en recouvrant les ouvertures
uninsulated “dangerous voltage” within the product’s enclosure 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A de la ventilation avec des objets tels que journaux, rideaux, tissus,
that may be of sufficient magnitude to constitute a risk of electric polarized plug has two blades with one wider than the other. A grounding etc.
shock to persons. type plug has two blades and a third grounding prong. The wide blade or the • Aucune flamme nue, par exemple une bougie, ne doit être placée
third prong are provided for your safety. If the provided plug does not fit into sur l’appareil.
The exclamation point within an equilateral triangle is intended
your outlet, consult an electrician for replacement of the obsolete outlet. • Veillez à respecter les lois en vigueur lorsque vous jetez les piles
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature 10. Protect the power cord from being walked on or pinched particularly at usagées.
accompanying the appliance. plugs, convenience receptacles, and the point where they exit from the • L’appareil ne doit pas être exposé à l’eau ou à l’humidité.
• Ne pas poser d’objet contenant du liquide, par exemple un vase,
WARNING: apparatus.
sur l’appareil.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 11. Only use attachments/accessories specified by the manufacturer.
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
PRECAUCIÓN:
• La ventilación no debe quedar obstruida por haberse cubierto las
When a cart is used, use caution when moving the cart/
CAUTION: aperturas con objetos como periódicos, manteles, cortinas, etc.
apparatus combination to avoid injury from tip-over.
• No debe colocarse sobre el aparato ninguna fuente inflamable sin
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE 13. Unplug this apparatus during lightning storms or when
protección, como velas encendidas.
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY unused for long periods of time.
• A la hora de deshacerse de las pilas, respete la normativa para el
RESULT IN HAZARDOUS RADIATION EXPOSURE. 14. Refer all servicing to qualified service personnel. cuidado del medio ambiente.
THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY Servicing is required when the apparatus has been damaged in any way, • No exponer el aparato al goteo o salpicaduras cuando se utilice.
ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. such as power-supply cord or plug is damaged, liquid has been spilled or • No colocar sobre el aparato objetos llenos de líquido, como
objects have fallen into the apparatus, the apparatus has been exposed to jarros.
n Laser Class (IEC 60825-1:2001) rain or moisture, does not operate normally, or has been dropped.
15. Batteries shall not be exposed to excessive heat such as sunshine, fire or CAUTION:
the like. To completely disconnect this product from the mains, disconnect
the plug from the wall socket outlet.
$-"44
The mains plug is used to completely interrupt the power supply to
-"4&3 130%6$5 the unit and must be within easy access by the user.
PRECAUTION:
Pour déconnecter complètement ce produit du courant secteur,
débranchez la prise de la prise murale.
n Copyrights / Droits d’auteur / Derechos de Autor La prise secteur est utilisée pour couper complètement
• It is prohibited by law to reproduce, broadcast, rent or play discs in l’alimentation de l’appareil et l’utilisateur doit pouvoir y accéder
public without the consent of the copyright holder. facilement.
• La reproduction, la diffusion, la location, le prêt ou la lecture
PRECAUCIÓN:
publique de ces disques sont interdits sans le consentement du
Para desconectar completamente este producto de la alimentación
détenteur des droits d’auteur.
eléctrica, desconecte el enchufe del enchufe de la pared.
• De acuerdo con las leyes está prohibido reproducir, emitir, alquilar El enchufe de la alimentación eléctrica se utiliza para interrumpir por
o interpretar discos en público sin la autorización del propietario de completo el suministro de alimentación eléctrica a la unidad y debe
los derechos de autor. de encontrarse en un lugar al que el usuario tenga fácil acceso.
I
ESPAÑOL FRANCAIS ENGLISH
3. NOTE
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for
help.
II
ENGLISH FRANCAIS ESPAÑOL
III
ENGLISH
n Contents
Playback Setting the Timer
Preparations··················································································· 13 Timer Playback··············································································22
Getting Started
Turning the Power On··································································· 13 Setting the Timer···········································································22
Accessories·······················································································2 Loading Discs················································································ 13 Sleep Timer Playback····································································23
Operations Possible During Playback·········································· 13
Cautions on Handling······································································2
Adjusting the Master Volume························································ 13
Cautions on Installation··································································2
Main Features··················································································2
Input Source Switching································································· 13 Other Functions
Adjusting the Tone········································································· 13
Discs··································································································2 Turning the Sound Off Temporarily (Muting)·································· 13 Convenient Functions···································································24
Discs usable on the RCD-M37························································2 Switching the Display’s Brightness··············································· 13 Auto Power On··············································································24
Holding Discs··················································································3 Listening with Headphones·························································· 13 Auto Function Selector Function···················································24
Loading Discs··················································································3 CD Playback··················································································· 14 Last Function Memory··································································24
Cautions on Loading Discs······························································3 Playing CDs··················································································· 14 Resetting the Microprocessor·······················································24
Cautions on Handling······································································3 Playing Repeatedly <Repeat Playback>········································ 14 Using an Optimizing Filter·····························································24
Cautions on Storing Discs·······························································3 Playing Random Order <Random Playback>································ 14
Cleaning Discs················································································3 Playing Tracks in the Desired Order <Program playback>············· 15
About the Remote Control Unit·····················································3 Switching the Display···································································· 15 Troubleshooting· ···························································· 25
Inserting the Batteries·····································································3 Playback of MP3 and WMA Files·················································· 15
Operating Range of the Remote Control Unit·································4 About the MP3 and WMA Formats That Can be Played··············· 15
Part Names and Functions······························································4 Playing MP3 and WMA Files························································· 16
Front Panel······················································································4 TUNER Playback············································································ 17 Specifications··································································· 26
Display····························································································5 Tuning in Broadcast Stations························································· 17
Rear Panel·······················································································5 Automatically Presetting FM Stations (Auto Preset)····················· 17
Remote Control Unit·······································································6 Presetting FM/AM Stations Manually··········································· 17
Listening to Preset Stations·························································· 18
Naming the Currently Tuned in Broadcast Station························· 18
iPod® Playback·············································································· 18
Connections Preparations·················································································· 18
Listening to Audio········································································· 19
Preparations·····················································································8 Disconnecting the iPod································································· 19
Cables Used for Connections·························································8 Playing a Portable Audio······························································· 19
Using the AM Loop Antenna···························································8 Connecting a Portable Player························································ 19
Assembling the AM Loop Antenna·················································8 Playing the Portable Player···························································· 19
Speaker Connections······································································9 USB Playback·················································································20
Connecting the Speaker Cables······················································9 Playable USB Memory Formats····················································20
Connecting the Playback Components······································· 10 Basic Operation·············································································20
Control Dock for iPod···································································· 10
Connecting the Recording Components····································· 10
CD Recorder / MD Recorder / Tape deck······································ 10
Connections to Other Devices······················································ 10
Antenna Terminals········································································· 10
USB Port······················································································· 11
Connecting the Power Cord·························································· 11
Once Connections are Completed··············································· 11
Turning the Power On··································································· 11
Setup
Setting the Current Time (24-Hour Display)································ 12
ENGLISH
Getting Started
Getting Started
Thank you for purchasing this DENON product. To ensure proper
operation, please read this owner’s manual carefully before using the Cautions on Handling Main Features
Connections
product.
After reading them, be sure to keep them for future reference. • Before turning the power switch on 1. High quality amplifier stressing sound quality
Check once again that all connections are correct and that there are Equippd with 30 W + 30 W (6 Ω/ohms) high quality amplifier
no problems with the connection cables. circuits.
• Power is supplied to some of the circuitry even when the unit is 2. Tone control and SDB control
Accessories
Setup
set to the standby mode. When traveling or leaving home for long Separate bass and treble tone controls for adjusting the tone to your
periods of time, be sure to unplug the power cord from the power tastes and Super Dynamic Bass (SDB) circuit for producing powerful
Check that the following parts are supplied with the product. outlet. bass sound even when the volume is low.
Playback
• Sufficiently ventilate the place of installation Source direct position provided for turning off the SDB and tone
q Remote control (RC-1097)........................................................ 1 control circuitry to make the response flat.
If the unit is left in a room full of the smoke from cigarettes, etc., for
w R03/AAA batteries.................................................................... 2
long periods of time, the surface of the optical pickup could get dirty, 3. CD player for digital sound
e Power cord (Cord length: Approx. 6.6 ft / 2 m)......................... 1
Setting the Timer
in which case it will not be able to read the signals properly. Compact body integrating a CD section in addition to the FM/AM
r AM loop antenna...................................................................... 1
• About condensation tuner and amplifier, allowing playback of CD-R/RW discs.
t FM indoor antenna................................................................... 1
y Owner’s manual....................................................................... 1 If there is a major difference in temperature between the inside of 4. Playback of MP3 and WMA files
u Warranty (for North America model only)................................. 1 the unit and the surroundings, condensation (dew) may form on Supports playback of discs and USB memory devices on which MP3
i Service station list.................................................................... 1 the operating parts inside the unit, causing the unit not to operate and WMA files are recorded. The track name and artist name of the
properly. currently playing track can be displayed on the set’s display.
q e r t
Other Functions
If this happens, let the unit sit for an hour or two with the power The characters that can be displayed “Switching the Display”
turned off and wait until there is little difference in temperature (vpage 16)
before using the unit. 5. Low standby power consumption
• Cautions on using mobile phones Designed with considerations on the environment, with the power
Using a mobile phone near this unit may result in noise. If so, move consumption when the power is in standby kept down to about 0.3 W.
the mobile phone away from this unit when it is in use.
Troubleshooting
b Note
b
b
b
Wall
ENGLISH
NOTE
Cleaning Discs
Getting Started
• Discs with special shapes (heart-shaped discs, octagonal discs, etc.) • “00 Tr 00 : 00” is displayed if a disc that cannot be played is loaded.
cannot be played. Do not attempt to play them, as doing so can • “00 Tr 00 : 00” is displayed if the disc is loaded upside-down or if no • If there are fingerprints or dirt on discs, wipe them off before using
damage the product. disc is loaded. the disc. Fingerprints and dirt can impair sound quality and cause
• Some discs and some recording interruptions in playback.
formats may not be playable. NOTE • Use a commercially available disc cleaning set or a soft cloth to clean
Connections
• Non-finalized discs cannot be Do not push the disc tray in by hand when the power is turned off. discs.
played. Doing so could damage the set.
b What is finalization?
Finalization is the process that
makes recorded CD-R/CD-RW discs playable on compatible
Setup
players. Cautions on Loading Discs
• Only load one disc at a time. Loading two or more discs can damage
Playback
the unit or scratch the discs.
Holding Discs • Do not use cracked or warped discs or discs that have been repaired
with adhesive, etc.
• Do not use discs on which the sticky part of cellophane tape or labels Gently wipe the disc from the Do not wipe with a circular
Cautions on Handling
Other Functions
Loading Discs
• Set the disc with the labeled side facing up.
• Do not get fingerprints, oil or dirt on discs.
• Take special care not to scratch discs when removing them from
About the Remote Control Unit
• Make sure the disc tray is fully open when inserting the disc. their cases.
• Place the discs flatly, 12 cm discs in the outer tray guide (Figure 1), 8 • Do not bend or heat discs.
cm discs in the inner tray guide (Figure 2). • Do not enlarge the hole at the center. Inserting the Batteries
Troubleshooting
• Do not write on the labeled (printed) surface with ball-point pens,
Figure 1 Figure 2 q Slide the rear lid in the w Load the two batteries properly
pencils, etc., or stick new labels on discs.
direction of the arrow and as indicated by the marks in the
• Water droplets may form on discs if they are moved suddenly from a
Outer tray guide Inner tray guide remove it. battery compartment.
cold place (outdoors for example) to a warm place, but do not try to
dry them off using a hairdryer, etc.
12 cm disc 8 cm disc
Specifications
Cautions on Storing Discs
• Be sure to remove discs after using them.
• Be sure to store discs in their cases to protect them from dust,
scratches, warping, etc.
• Do not store discs in the following places:
• Place 8 cm discs in the inner tray guide without using an adapter. e Put the rear cover back on.
1. Places exposed to direct sunlight for long periods of time
2. Dusty or humid places
3. Places exposed to heat from heating appliances, etc.
ENGLISH
NOTE
Part Names and Functions
Getting Started
• Replace the batteries with new ones if the set does not operate even
when the remote control unit is operated close to the unit.
For buttons not explained here, see the page indicated in parentheses ( ).
• The supplied batteries are only for verifying operation.
• When inserting the batteries, be sure to do so in the proper direction,
following the “q” and “w” marks in the battery compartment. Front Panel
Connections
flames.
• If the battery fluid should leak, carefully wipe the fluid off the inside
of the battery compartment and insert new batteries.
Playback
• Remove the batteries from the remote control unit if it will not be in
use for long periods.
Setting the Timer
Approx. 23 feet / 7 m
Troubleshooting
30°
q w e r t y u i o Q1
30°
q Power operation button o Master volume control knob
(ON/STANDBY)······································································· (13) (VOLUME)··············································································· (13)
w Power indicator······································································· (13) Q0 MENU/SET button··························································· (12, 22)
Specifications
ENGLISH
Getting Started
q w e r t y u i y tr
Connections
Setup
Playback
q Information display
Various information is displayed here, depending
on the operation mode.
Other Functions
t TOTAL indicator
Lights when the total number of tracks and total
time of the CD are displayed. q w e
y Play mode indicator··································· (14)
Troubleshooting
u Timer indicator··········································· (23) q Monaural audio connector
(MONO OUT)················································(9)
i F: Flashes when remote control signals are
received. w Speakers terminals·······································(9)
e AC inlet (AC IN)··········································· (11)
r FM/AM antenna terminals························· (10)
Specifications
t DOCK CONTROL jack································· (10)
y AUX1/AUX2
Analog audio connectors··························· (10)
ENGLISH
Buttons Operable for All Functions (CD, TUNER, iPod and USB) Buttons Operable When the Function is Set to “CD”
The buttons listed at “Buttons Operable for All Functions” can also be used.
q DIMMER button··········································· (13) q Number buttons·········································· (14)
Connections
Q0 Fast-reversing/Fast-forwarding buttons
i (6, 7) ···················································· (14)
The DAB/RDS button cannot be used.
w o Q1 Reverse-skip/Forward-skip buttons
(8, 9)···················································· (14)
e Q0 Q2 Stop button (2)············································ (14)
r
Q1 Q3 Cursor buttons (uio p)··························· (16)
Other Functions
t Q2
w
Troubleshooting
e u
y
r
Q3
Specifications
u
i
ENGLISH
Buttons Operable When the Function is Set to “TUNER” Buttons Operable When the Function is Set to “iPod”, “USB”
Getting Started
The buttons listed at “Buttons Operable for All Functions” can also be used. The buttons listed at “Buttons Operable for All Functions” can also be used.
Connections
r CLEAR/DEL button······································ (18) r MENU/SET button······································ (19)
t Tuning +, – buttons (TU+, TU–)··················· (17) t FOLDER MODE button································ (21)
y Channel +, – buttons (CH+, CH–)················ (17) y TIME/DISPLAY button································· (19)
Setup
u Stop button (2)············································ (17) u REPEAT button············································· (21)
q i ENTER/MEMO button································· (17)
q i Fast-reversing/Fast-forwarding buttons
o Cursor buttons (uio p)··························· (17) (6, 7) ···················································· (21)
Playback
o Reverse-skip/Forward-skip buttons
r (8, 9)···················································· (21)
Other Functions
r
Troubleshooting
Q2
t
i Q3
o Q4
y Q5
Specifications
ENGLISH
Getting Started
Connections
Connections for all compatible audio signal formats are described
in this owner’s manual. Please select the types of connections Preparations Using the AM Loop Antenna
Connections
• Do not plug in the power cord until all connections have been
completed. Audio cables
Playback
• When making connections, also refer to the owner’s manual of the Nail, tack, etc.
Analog connections (stereo)
other components.
• Be sure to connect the left and right channels properly (left with left, (White) L L
right with right).
Setting the Timer
(Red) R R
• Do not bundle power supply cords together with connection cables. n To use standing alone
Doing so can result in humming or noise. Use the procedure below to assemble.
Stereo pin-plug cable
(Black)
Other Functions
Pin-plug cable
Speaker connections
Speaker cable
Signal direction
1 Bend in the direction of the arrow.
Audio signal:
Specifications
Output Input
2 Insert into the hole.
Input Output
ENGLISH
NOTE
Speaker Connections Connecting the Speaker Cables
Getting Started
• Use speakers with an impedance of 6 to 16 Ω/ohms. The protection
Check the left (L) and right (R) channels and the + (red) and – (black) circuit may be activated if speakers with an impedance other than
Subwoofer
Speaker SC-M37 (Supplied) terminals on the set and the speakers to be used and interconnect specified are used.
with built-in
the cables to the same polarities. • Connect the speaker cables in a way that they do not stick out of the
amplifier
speaker terminals. The protection circuit may be activated if the core
Connections
wires touch the rear panel or screws or if the + and – sides touch.
the tip of the cable, twist the core wire and • Never touch the speaker terminals while the power is on. Doing so
could cause electric shock.
terminate it.
(R) (L) Protector circuit
Setup
*/ w q w q 2 Turn the speaker terminal counterclockwise
to loosen it.
The protection circuit will be activated in the following cases:
• When the speaker cable's core wires are touching the rear
Playback
panel or screws or when the speaker cable’s + and – sides are
touching
Other Functions
in ventilation around the set or in connections, the set could be
damaged. Turn off the power, then contact a DENON servicing and
When using a banana plug
inquiry outlet.
Tighten the speaker terminal firmly before inserting the banana
plug.
Troubleshooting
Specifications
ENGLISH
Components Components
Antenna Terminals
Control Dock for iPod CD Recorder / MD Recorder / Tape deck
Connections
AM/FM
Use a DENON Control Dock for iPod (ASD-1R or ASD-3N/3W, sold
CD recorder / The AM and FM reception sensitivity depends on the place the antenna
separately ) to connect the set with an iPod.
MD recorder / is set and the direction in which it is set. Set it so that reception is
Tape deck best.
iPod
Setup
"6%*0
L R L R Black White
Setting the Timer
R L
L R L R
R L
Other Functions
Troubleshooting
Specifications
• When using a Control Dock for iPod, the Control Dock for iPod must
be set. For details, refer to the operating instructions of the Control
Dock for iPod.
• To use an iPod, see “iPod® Playback” (vpage 18).
10
ENGLISH
n Connecting the AM loop antenna
USB Port Connecting the Power Cord
Getting Started
1 Push the lever.
USB
Connections
3 Return the lever.
Power cord (Supplied)
Setup
NOTE To household power outlet
(AC 120 V, 60 Hz)
• Make sure the AM loop antenna lead terminals do not touch metal
Playback
parts of the panel.
• Do not connect two FM antennas simultaneously.
Other Functions
• For details about USB memory devices, see “Playable USB Memory
Formats” (vpage 20).
Troubleshooting
Turning the Power On (vpage 13)
Specifications
11
ENGLISH
Getting Started
Setup
Symbols used to indicate buttons in this manual n Checking the current time when the power is on
Setting the Current Time Press [CLOCK].
Connections
Button located on both the main unit and the remote control
unit BUTTON (12-Hour Display) When pressed again or if a different operation is performed, the
normal display reappears.
Button only on the main unit <BUTTON> GExampleH Setting the current time to 10:15 am
Button only on the remote control unit [BUTTON] n Checking the current time when the power is set
to standby
1 Press ON/STANDBY to turn the power on.
Setup
2 Press [CLOCK].
Playback
3 Press MENU/SET for over 1 second to set the manual • When the function is set to iPod, the current time cannot be set.
Setting the Timer
[DIMMER] ON/STANDBY
TIME Adj AM10:15
SOURCE
8, 9
[CD 1/3]
[VOLUME df]
SDB/TONE [MUTE]
MENU/SET [ENTER/MEMO]
[o p]
[CLOCK]
12
ENGLISH
Getting Started
Playback
[Selectable modes]
Preparations Operations Possible During
Connections
SDB
Playback : Switches Super Dynamic Bass on and off.
Setup
: Adjusts the treble sound.
• The power turns on. Press again to set the power to standby.
• Power indicator Either turn <VOLUME> or press [VOLUME df]. [Variable range] –10dB ~ +10dB
Standby∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Red The volume level is displayed. S.DIRECT : Turns SDB, bass and treble off.
Playback
Power on∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Green
When the timer is set∙∙∙∙∙∙∙∙∙∙∙∙∙Orange [Variable range] Settings made upon purchase :
• SDB······················ OFF • TREBLE················· 0 dB
VOLUME 00 ~ 45, VOLUME MAX • BASS··················· 0 dB • S. DIRECT··············OFF
Other Functions
n Completely turning off the power (AUX1/Dock) The “MUTE ON” is displayed.
Unplug the power cord from the wall outlet. USB PORTABLE IN AUX2
b Note that the time setting is cleared when the power cord is b “AUX1/Dock” is displayed when a Control Dock for iPod is
unplugged from the outlet. connected to “AUX1”. To cancel, press [MUTE] again.
b The settings made for the various functions may be cleared if the b “PORTABLE IN” is only displayed when connected. (The mute mode is also canceled when the <VOLUME> control is
power cord is left unplugged from a power outlet for an extended
Troubleshooting
turned or a [VOLUME df] is pressed.)
period of time.
Specifications
b “Loading discs” (vpage 3).
S.DIRECT TREBLE OFF
n To close the disc tray GAbout the displayH b The display’s brightness switches each time the button is
Press <5> again. When the SDB is on∙∙∙∙∙∙∙∙∙∙∙∙∙ “SDB” is displayed. pressed.
b The disc tray also closes when <1/3>, [CD 1/3] or SOURCE is When BASS or TREBLE is set to something other than 0 dB
pressed. ∙ ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ “TONE” is displayed.
NOTE Listening with Headphones
Do not place any foreign objects in the disc tray. Doing so could
damage it.
29 Display the mode you want to adjust, then use
tone.
and [o p] to turn on or off and to adjust the
8,
Plug the headphones (sold separately) into the <PHONES>.
b The sound from the speakers is automatically cut off.
b If no operation is performed for 5 seconds, the adjustment is
retained and the normal display reappears.
NOTE
Be careful not to set the volume too high when using headphones.
13
ENGLISH
The “1” indicator lights and playback begins. Single-track repeat All-track repeat
8, 9 <1/3> Repeat off
(indicator turns off)
• If the function is set to something other than “CD”, press [CD 1/3]
Setup
to switch the function to “CD” and start playback ( vpage 24 “Auto [Selectable items]
Function Selector Function”). 1 (Single-track repeat) :O
nly 1 track is played repeatedly.
• The function can also be switched to “CD” using SOURCE.
Playback
8, 9 NOTE
GExampleH : Track 20 : [+10], [+10], [0]
[CD 1/3] When [REPEAT] pressed during random playback, the tracks are played
[2] in a different random order after this turn.
[TIME/DISPLAY]
14
ENGLISH
Playable MP3/WMA file
Playing Tracks in the Desired Order Playback of MP3 and WMA Files
Getting Started
Sampling
<Program playback> File format
frequency
Bit rate Extension
There are many music distribution sites on the Internet allowing you
Up to 25 tracks can be programmed. to download music files in MP3 or WMA (Windows Media® Audio) MP3 32, 44.1, 48 kHz 32 ~ 320 kbps .MP3
format. The music (files) downloaded from such sites can be stored on
1 In the stop mode, press [PROG/DIRECT]. WMA 32, 44.1, 48 kHz 64 ~ 160 kbps .WMA
CD-R or CD-RW discs and played on the RCD-M37.
The “PGM” indicator lights.
Connections
“Windows Media” and “Windows” are registered trademarks or
Setup
Press [PROG/DIRECT], [3], [+10], [2], [7]. enjoyment, and as per copyright laws may not be used in other ways
without permission of the copyright holder.
3 Press <1/3> or [CD 1/3]. About the MP3 and WMA Formats That
Playback
Playback starts in the programmed order.
Can be Played
n Checking the order of the programmed tracks CD-R and CD-RW discs created in the format described below can be
Other Functions
The last track programmed is cleared each time the button is
pressed.
n To clear one programmed track at a time Maximum number of playable files and folders
In the stop mode, use 9 or 8 to select the track to be Total number of folders + files: 512
cleared, then press [CLEAR/DEL]. Maximum number of files in a folder: 255
n Clearing the all programmed track
Troubleshooting
In the stop mode, press [PROG/DIRECT]. File format
The “PGM” indicator turns off. MPEG-1 Audio Layer-3
WMA (Windows Media Audio)
When [REPEAT] is pressed, the tracks are played repeatedly in the Tag data
programmed order.
Specifications
ID3-Tag (Ver.1x)
META-Tag (Compatible with title, artist and album names)
15
ENGLISH
n Switching the Display
Playing MP3 and WMA Files
Getting Started
Symbols used to indicate buttons in this manual During playback, press [TIME/DISPLAY].
SOURCE <1/3> <BAND/2> 2 Press [FOLDER MODE] and select “Folder Mode” or
“Disc Mode”.
GAbout the displayH
A to Z a to z 0 to 9 ^ ’ ( ) * + , - . / = (space)
n To Play Repeatedly
When “Folder Mode” is selected∙∙∙∙∙∙“FLD” is displayed.
Press [REPEAT].
Setup
8, 9 MENU/SET 4 Use
played.
8, 9 or [o p] to select the file to be When “Disc Mode” is selected:
[TIME/DISPLAY]
16
ENGLISH
About the FM Broadcast Reception Status Display
TUNER Playback Automatically Presetting FM Stations
Getting Started
The “ST” indicator lights when receiving stereo broadcasts.
(Auto Preset)
Up to 40 stations can be preset.
Tuning in Broadcast Stations Auto preset is not possible with AM broadcast stations.
If the signal is weak and stable stereo reception is not possible, select
Connect the antenna beforehand (vpage 10). “FM MONO” to receive in monaural.
Connections
1 Press
band.
[TUNER] or <BAND/2> to select the reception
About Switching the Tuning Mode and Preset Mode MONO”.
Setup
GAbout the displayH
n To switch to the preset mode
3
When FM AUTO is selected∙∙∙∙∙∙∙∙∙∙∙∙∙∙“AUTO” is displayed.
Press <+/9> while pressing <BAND/2>. Press MENU/SET again.
When FM MONO is selected∙∙∙∙∙∙∙∙∙∙∙∙“MONO” is displayed.
Playback
The “PRESET” indicator flashes for about 5 seconds. “Search” flashes and auto presetting starts.
When AM is selected∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙The reception mode is not
displayed. n To switch to the tuning mode
Press <8/–> while pressing <BAND/2>.
2 Use <8/–, +/9> or [TU –, TU +] to select the The “TUNING” indicator flashes for about 5 seconds.
Other Functions
[TUNER] to switch the function to “TUNER” (vpage 24 “Auto The “Search” indicator turns off.
Function Selector Function”).
• The function can also be switched to “TUNER” using SOURCE.
Troubleshooting
search and tune in broadcast stations.
b Stations whose signal is weak cannot be tuned in.
n To Stop Auto Tuning
Press <8/–, +/9> or [TU –, TU +].
1 Tune in the station.
n To Tune Manually
The reception frequency switches each time <8/–, +/9> or
2 Press [ENTER/MEMO].
The smallest non-registered preset number flashes.
Specifications
[TU –, TU +] is pressed.
3 Use <8/–, +/9>, [CH –, CH +] or [o p] to select
the number, then press [ENTER/MEMO].
The preset number, reception band and reception frequency are
A humming sound may be heard when using a TV nearby while
displayed.
receiving AM programs. If this happens, move the system as far from
the TV as possible.
17
ENGLISH
(vpage 17).
iPod is a trademark of Apple Inc., registered in the U.S.
<8/–, +/9> MENU/SET and other countries.
b The iPod may only be used to copy or play contents that are not
copyrighted or contents for which copying or playback is legally
Naming the Currently Tuned in Broadcast
Setup
2 Press MENU/SET three times. (vSee the Control Dock for iPod’s operating instructions.)
The “STATION NAME” is displayed.
b Operate within 5 seconds.
2 Press SOURCE to select “AUX1/Dock”.
ON/STANDBY SOURCE
3 Press [o p].
4 Use [ui] to select the character, then press [p] to The mode switches each time the button is pressed.
ON/STANDBY
set. [Selectable mode] Browse mode Remote mode
b Characters that can be input.
Display location Main unit display iPod display
[NUMBER]
Troubleshooting
A to Z a to z 0 to 9 ^ ’ ( ) * + , - . / = (space)
Playable Audio file S S
b Press [o p] to move the cursor.
files Video file A Sz
[CLEAR/DEL] Use this to correct input characters.
Remote
5
Active control unit S S
Press [ENTER/MEMO].
SOURCE Naming mode is finished. buttons (RCD-M37)
Specifications
18
ENGLISH
To Switch the Display
Listening to Audio Playing a Portable Audio
Getting Started
During playback, press [TIME/DISPLAY]. Your portable audio player can be connected to the RCD-
1 Use [ui] to select the item, then press [ENTER/
MEMO] or [p] to select the music file to be played.
The display switches each time the button is pressed.
Title name Artist name
M37’s portable jack to play tracks on the portable audio
player.
2
Album title
Connections
Press [iPod 1/3].
Playback starts.
Connecting a Portable Player
Setup
• If the function is set to something other than “AUX1/Dock”, press
[iPod 1/3] to switch the function to “AUX1/Dock” and start playback.
(vpage 24 “Auto Function Selector Function”) 1 Press ON/STANDBY to set the standby mode.
Playback
• The function can also be switched to “AUX1/Dock” using SOURCE.
Other Functions
Play the track from the beginning/
8, 9 Portable
Play the next track.
8, 9
Fast-reverse the track/
6, 7 )&"%1)0/&
Fast-forward the track.
o, p, u, i Click Wheel Select an item.
Troubleshooting
Enter the selection or plays the Connect the RCD-M37 and portable audio player using a separately
ENTER/MEMO Select
track. sold mini-stereo audio cable.
REMOTE/ Switch between the browse
–
BROWSE mode and the remote mode.
REPEAT – Switch the repeat function
Playing the Portable Player
RANDOM – Switch the shuffle function
Specifications
MENU/SET MENU
Display the menu or return to the
previous menu. 1 Press SOURCE to select “PORTABLE IN”.
NOTE
• DENON will accept no responsibility whatsoever for any loss of iPod
data.
2 Play the portable audio player.
The Portable Audio are output.
b Also read the portable audio player’s operating instructions.
• Depending on the type of iPod and the software version, some
functions may not operate.
NOTE
When using the portable player’s headphones jack, set the volume on
the portable player to an appropriate level.
19
ENGLISH
b If the USB memory device is divided into multiple partitions, only • If the function is set to something other than “USB”, press [USB
the top drive can be selected. 1/3] to switch the function to “USB” and start playback.
(vpage 24 “Auto Function Selector Function”)
Playback
Maximum number of playable files and folders • The function can also be switched to “USB” using SOURCE.
File Format
MPEG-1 Audio Layer-3
WMA (Windows Media Audio)
SOURCE <BAND/2>
Other Functions
Tag Data
ID3-Tag (Ver.1x)
META-Tag (Compatible with title, artist and album names)
8, 9 Only music files that are not copyright-protected can be played on this
[2] [USB 1/3] set.
b Contents downloaded from pay sites on the Internet are copyright
protected. Also, files encoded in WMA format when ripped from a
CD, etc., on a computer may be copyright protected, depending on
the computer’s settings.
[FOLDER MODE]
[ui]
[TIME/DISPLAY]
20
ENGLISH
n To Switch the “Folder Mode” or “Memory Mode” NOTE
Getting Started
Press [FOLDER MODE]. • DENON will take no responsibility whatsoever for any loss or damage
GAbout the displayH to data on USB memory devices when using the USB memory
When “Folder Mode” is selected∙∙∙∙∙∙∙∙∙“FLD” is displayed. device connected to the RCD-M37.
When “Memory Mode” is selected∙∙∙∙∙“FLD” is not displayed. • USB memory devices will not work via a USB hub.
Folder Mode : • DENON does not guarantee that all USB memory devices will
All the files in the selected folder are played.
Connections
operate or be suppled power. When using a USB connection type
Memory Mode : portable hard disk of the type for which power can be supplied by
After the selected folder and files are played, all the files in all the connecting an AC adapter, we recommend using the AC adapter.
folders are played.
n To Switch the Folder or File During Playback
Setup
• Folder
Use [ui] to select the folder.
• File
Playback
Use 8, 9 to select the file, or use [NUMBER] (0 ~ 9, +10)
to select the file number.
n Stopping Playback
Other Functions
During playback, press and hold in [6, 7].
n Playing Repeatedly (Memory mode only)
Press [REPEAT].
n Playing Random Order (Memory mode only)
In the stop mode, press [RANDOM].
Troubleshooting
n Switching the Display
During playback, press [TIME/DISPLAY].
File name display Title/artist display
Title/album display
Specifications
b The characters that can be displayed are as follows:
A to Z a to z 0 to 9 ^ ’ ( ) * + , - . / = (space)
21
ENGLISH
Getting Started
Timer Playback
4 Use 8 , 9 or [o p] to select the function to be
Symbols used to indicate buttons in this manual
Connections
Button located on both the main unit and the remote control The everyday timer, once timer and sleep timer can be set. played.
unit BUTTON CD TUNER AUX1
Timer order of priority (AUX1/Dock)
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON] The order of priority when the times set for the different USB AUX2
timers overlap is as follows:
Setup
• Once timer playback -w Press MENU/SET or [ENTER/MEMO].
Playback starts (the power turns on) and stops (the power
Other Functions
1 7
ON/STANDBY 8, 9 VOLUME Press MENU/SET. Use 8, 9 or [o p] to set the “hours” for the
The “TIMER” is displayed. timer start time.
b Operate within 5 seconds. E ON AM12:00
Troubleshooting
ON/STANDBY
[SLEEP]
2 Use
mode.
8, 9 or [o p] to select the timer play
ONCE EVERYDAY
8 Press MENU/SET or [ENTER/MEMO].
The “hours” for the timer start time are set.
3
E ON AM10:00
Press MENU/SET or [ENTER/MEMO].
10
The timer play mode is set.
Press MENU/SET or [ENTER/MEMO].
The “minutes” for the timer start time are set.
8, 9
[2]
11 Use8, 9 or [o p] to set the “hours” for the
timer stop time.
E OFF AM12:00
VOLUME
12 Press MENU/SET or [ENTER/MEMO].
The “hours” for the timer stop time are set.
MENU/SET [ENTER/MEMO]
[o p]
22
ENGLISH
13 Use 8 , 9 or [o p] to set the “minutes” for the n To check the timer settings
Sleep Timer Playback
Getting Started
q Press MENU/SET.
timer stop time. The “TIMER” is displayed. Use this function to automatically switch the power to the
E OFF AM12:00
w Press 8, 9 or [o p]. standby mode after a specific amount of time (minutes).
14
The “EVERYDAY” or “ONCE” is displayed. The sleep timer can be set to up to 90 minutes, in steps
Press MENU/SET or [ENTER/MEMO].
e Press MENU/SET. of 10 minutes.
The “minutes” for the timer stop time are set. The display switches each time the button is pressed.
Connections
15 Use 8 , 9 or [o p] to turn timer playback on. n To change the timer settings
Repeat the procedure under “Setting the Timer” (vpage 22).
1 Select and play the desired function.
Setup
Display Once timer Everyday timer Press <BAND/2> or [2].
1_off/E_off OFF OFF Return to step 2 under “Setting the Timer” (vpage 22). Repeat OFF 10 20
(“SLEEP “ indicator turns off)
Playback
1_on/E_on ON ON the procedure.
1_off/E_on OFF ON The “SLEEP” indicator flashes.
n To clear the timer settings
1_on/E_off ON OFF
3
q Press MENU/SET. Press [SLEEP] while the “SLEEP” indicator is
16
The “EVERYDAY” or “ONCE” is displayed.
Press MENU/SET or [ENTER/MEMO]. e While “EVERYDAY” or ”ONCE” is displayed, press <BAND/2> or b After about 5 seconds, the set returns to as it was before the
The timer setting is set.
[2] for at least 2 seconds. sleep timer was set, and the “SLEEP” indicator lights.
17VOLUME
Adjust the volume for when the timer starts using n If there is a power failure
Other Functions
. The time setting and the timer settings are cleared. Reset the
n Canceling the sleep timer
Either press [SLEEP] at step 2 under “Sleep Timer Playback” until
current time, then reset the timer.
Troubleshooting
Pause the track you want to play, and keep the power on for DENON
n Canceling the timer control dock for iPod.
Press MENU/SET twice. n Checking the time remaining until the sleep timer
At step 15 under “Setting the Timer”, use 8, 9 or [o p] to starts
turn off the timer on/off indicator and turn off “ ”. Press [SLEEP].
When the function is set to iPod, the timer cannot be set. To set the
Return to step 2 under “Sleep Timer Playback”.
timer, first switch to a function other than iPod.
Specifications
23
ENGLISH
Getting Started
Other Functions
Symbols used to indicate buttons in this manual
Convenient Functions Resetting the Microprocessor
Connections
Button located on both the main unit and the remote control
unit BUTTON Perform this procedure if the display is abnormal or if
Button only on the main unit <BUTTON> operations cannot be performed.
Button only on the remote control unit [BUTTON] Auto Power On When the microprocessor is reset, all the settings are
When the power is in standby, the power turns on when reset to their default values.
Setup
NOTE
The Auto Power On function cannot be used with iPods.
3 [CLOCK]
Press .
The “AM12:00” display flashes.
Getting Started
Troubleshooting
If a problem should arise, first check the following: GRemote Control UnitH
1. Are the connections correct?
Symptom Cause Countermeasure Page
2. Is the set being operated as described in the owner’s manual?
Connections
Set does not work • Batteries are worn. • Replace with new batteries. 3
3. Are the other components operating properly?
properly when • You are operating outside of the • Operate within the specified 4
If this unit does not operate properly, check the items listed in the table below. Should the problem persist,
remote control specified range. range.
there may be a malfunction.
unit operated. • Obstacle between main unit and • Remove the obstacle. 4
In this case, disconnect the power immediately and contact your store of purchase.
remote control unit.
Setup
GGeneralH • The batteries are not inserted in • Insert the batteries in the 3
the proper direction, as indicated proper direction, following the
Symptom Cause Countermeasure Page
by the polarity marks in the polarity marks in the battery
Playback
Set does not • External noise or interference is • Reset the microprocessor. 24 battery compartment. compartment.
operate properly. causing the set to malfunction. • The set’s remote control sensor • Move the set to a place in which 4
Display not lit • Power cord not plugged in • Check the connections on 11 is exposed to strong light (direct the remote control sensor will
and sound not securely. the set's rear panel and the sunlight, inverter type fluorescent not be exposed to strong light.
Other Functions
• MUTING is on. • Switch off MUTING. 13 is shown on the
display even
Display is off. • The Dimmer setting is set to • Set to something other than 13 though a CD is
“OFF”. “OFF”. loaded.
Power turns off • Protection circuit activated due • Turn off the power, wait for the 9 Disc is not played • The disc is dirty or scratched. • Wipe the dirt off the disc or 3
suddenly and to rise of internal temperature. set to fully cool down, then turn when CD 1/3 replace the disc.
power indicator the power back on.
Troubleshooting
button is pressed.
flashes red. • Place the set in a well-ventilated 9
A specific part • The disc is dirty or scratched. • Wipe the dirt off the disc or 3
place.
of a disc is not replace the disc.
• Core wires of two speakers are • First unplug the power cord, 9
played.
touching each other or a core then twist the core wires tightly
wire is sticking out of the terminal or terminate the speaker cables, A CD-R or CD-RW • The disc has not been finalized. • Finalize the disc then play it. 2
and touching the set’s rear panel, then reconnect. disc cannot be • The recording conditions are bad • Use a properly recorded disc. –
Specifications
activating the protection circuit. played. or the quality of the disc itself it
• Set is damaged. • Turn off the power and contact a – poor.
DENON service center. MP3 and WMA • The file formats, extensions or • Create discs with file formats, 15
files cannot be settings made when disc was extensions or settings compatible
played. created are not compatible with with the RCD-M37.
the RCD-M37.
25
ENGLISH
GTunerH
Getting Started
Symptom
Continuous noise
Cause Countermeasure
• Antenna cable is not properly • Connect the antenna cable
Page
10
Specifications
is heard when connected. properly.
receiving FM • Connect an outdoor antenna. –
programs. n Audio section
• Power amplifer
Connections
Hissing or • This may be noise from a TV or • Turn off the TV. – Rated output: 30 W + 30 W (6 Ω/ohms, 1 kHz T.H.D 10 %)
continuous noise interference from a radio station. • Change the position and direction 10 n Tuner section
is heard when of the AM loop antenna. Reception frequency range: FM: 87.5 MHz ~ 107.9 MHz AM: 520 kHz ~ 1710 kHz
receiving AM Receiving sensitivity: FM: 1.5 μV/75 Ω/ohms AM: 20 μV
programs. FM stereo separation: 35 dB (1 kHz)
Setup
GiPodH n CD section
Playback frequency response: 2 Hz ~ 20 kHz
Playback
Symptom Cause Countermeasure Page Wow & flutter: Below measurable limits (± 0.001%)
iPod cannot be • Device you want to play and set • Select an appropriate input 18 Sampling frequency: 44.1 kHz
played. input source do not match. source.
• Cable is not properly connected. • Reconnect. 10
n Clock/Timer section
Clock method: Crystal oscillator (Within 1 ~ 2 minutes per month)
Setting the Timer
• Control Dock for iPod’s AC • Plug the Control Dock for iPod’s – Timer: Everyday/Once timer: One system each
adapter is not connected to AC adapter into a power outlet. Sleep timer: 90 minutes, maximum
power outlet.
n General
Power supply: AC 120 V, 60 Hz
GUSBH Power consumption: 65 W
Symptom Cause Countermeasure Page Approx. 0.3 W (standby)
Other Functions
Maximum external dimensions: 210 (W) x 115 (H) x 308.5 (D) mm (8-17/64” x 4-33/64” x 12-9/64”)
When a USB • The set cannot recognize a USB • Check the connection. 11 Weight: 4.3 kg (9 lbs 7 oz)
memory device memory device.
is connected, • A USB memory device not • Connect a USB memory device – n Remote control unit (RC-1097)
“USB” is not conforming to mass storage class conforming to mass storage Remote control method: IR pulse method
displayed. or MTP standards is connected. class or MTP standards. Power supply: R03/AAA Type (two batteries)
• A USB memory device that • This is not a malfunction. DENON – Maximum external dimensions: 49 (W) x 220 (H) x 24 (D) mm (1-59/64” x 8-21/32” x 15/16”)
Troubleshooting
memory device other than FAT16 or FAT32. FAT32. For details, refer to the
cannot be played. USB memory device’s operating
instructions.
• USB memory device is divided • When divided into multiple –
into multiple partitions. partitions, only files stored in the
top partition can be played.
• Files are stored in a non- • Record the files in a compatible 20
compatible format. format.
• You are attempting to play a file • Files that are copyright protected 20
that is copyright protected. cannot be played on this set.
26
www.denon.com
Denon Brand Company, D&M Holdings Inc.
Printed in China 5411 10028 000D
SPEAKER
SC-M37
Owner’s Manual
Bedienungsanleitung
Manuel de l’Utilisateur
Manuale delle istruzioni
Manual del usuario
Gebruiksaanwijzing
Bruksanvisning
ENGLISH DEUTSCH FRANCAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
I
SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANCAIS DEUTSCH ENGLISH
n NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO /
NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA
CAUTION:
• The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, tablecloths, curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Attention should be drawn to the environmental aspects battery disposal.
• Do not expose the set to dripping or splashing fluids.
• No objects filled with liquids, such as vases, shall be placed on the apparatus.
ACHTUNG:
• Die Belüftung sollte auf keinen Fall durch das Abdecken der Belüftungsöffnungen durch
• Do not let foreign objects into the set. Gegenstände wie beispielsweise Zeitungen, Tischtücher, Vorhänge o. Ä. behindert
• Keep the apparatus free from moisture, water, and dust. • Keine fremden Gegenstände in das Gerät kommen lassen. werden.
• Avoid high temperatures. • Halten Sie das Gerät von Feuchtigkeit, Wasser und Staub • Ne pas laisser des objets étrangers dans l’appareil. • Auf dem Gerät sollten keinerlei direkte Feuerquellen wie beispielsweise angezündete
Allow for sufficient heat dispersion when installed in a rack. fern. • E’ importante che nessun oggetto e inserito all’interno Kerzen aufgestellt werden.
• Vermeiden Sie hohe Temperaturen. • Protéger l’appareil contre l’humidité, l’eau et la poussière. dell’unità. • Bitte beachten Sie bei der Entsorgung der Batterien die geltenden Umweltbestimmungen.
Beachten Sie, dass eine ausreichende Belüftung gewährleistet • Tenete l’unità lontana dall’umidità, dall’acqua e dalla • No deje objetos extraños dentro del equipo. • Das Gerät sollte keiner tropfenden oder spritzenden Flüssigkeit ausgesetzt werden.
wird, wenn das Gerät auf ein Regal gestellt wird. polvere. • Laat geen vreemde voorwerpen in dit apparaat vallen. • Auf dem Gerät sollten keinerlei mit Flüssigkeit gefüllten Behälter wie beispielsweise Vasen
• Eviter des températures élevées. • Mantenga el equipo libre de humedad, agua y polvo. • Se till att främmande föremål inte tränger in i apparaten. aufgestellt werden.
Tenir compte d’une dispersion de chaleur suffisante lors de • Laat geen vochtigheid, water of stof in het apparaat
l’installation sur une étagère. binnendringen. ATTENTION :
• Evitate di esporre l’unità a temperature elevate. • Utsätt inte apparaten för fukt, vatten och damm. • La ventilation ne doit pas être gênée en recouvrant les ouvertures de la ventilation avec des
Assicuratevi che vi sia un’adeguata dispersione del calore objets tels que journaux, rideaux, tissus, etc.
quando installate l’unità in un mobile per componenti audio. • Aucune flamme nue, par exemple une bougie, ne doit être placée sur l’appareil.
• Evite altas temperaturas. • Veillez à respecter I’environnement lorsque vous jetez les piles usagées.
Permite la suficiente dispersión del calor cuando está • L’appareil ne doit pas être exposé à l’eau ou à l’humidité.
instalado en la consola. • Aucun objet conten ant du liquide, par exemple un vase, ne doit étre placé sur l’appareil.
• Vermijd hoge temperaturen.
Zorg vocr een degelijk hitteafvoer indien het apparaat op PRECAUZIONI:
een rek wordt geplaatst. • Le aperture di ventilazione non devono essere ostruite coprendole con oggetti, quali
• Do not let insecticides, benzene, and thinner come in
• Undvik höga temperaturer. giornali, tovaglie, tende e così via.
contact with the apparatus.
Se till att det finns möjlighet till god värmeavledning vid • Unplug the power cord when not using the apparatus for • Lassen Sie das Gerät nicht mit Insektiziden, Benzin oder • Non posizionate sull’unità fiamme libere, come ad esempio le candele accese.
montering i ett rack. long periods of time. • Prestate attenzione agli aspetti legati alla tutela dell’ambiente quando si smaltisce la
Verdünnungsmitteln in Berührung kommen.
• Wenn das Gerät längere Zeit nicht verwendet werden soll, • Ne pas mettre en contact des insecticides, du benzène et batterie.
trennen Sie das Netzkabel vom Netzstecker. • L’apparecchiatura non deve essere esposta a gocciolii o spruzzi.
un diluant avec l’appareil.
• Débrancher le cordon d’alimentation lorsque l’appareil n’est • Assicuratevvi che l’unità non venga in contatto con • Non posizionate sull’apparecchiatura nessun oggetto contenente liquidi, come ad esempio
pas utilisé pendant de longues périodes. i vasi.
insetticidi, benzolo o solventi.
• Disinnestate il filo di alimentazione quando avete I’intenzione • No permita el contacto de insecticidas, gasolina y diluyentes
di non usare il filo di alimentazione per un lungo periodo di PRECAUCIÓN:
con el equipo. • La ventilación no debe quedar obstruida por haberse cubierto las aperturas con objetos
tempo. • Laat geen insektenverdelgende middelen, benzine of
• Desconecte el cordón de energía cuando no utilice el equipo como periódicos, manteles, cortinas, etc.
verfverdunner met dit apparaat in kontakt komen. • No debe colocarse sobre el aparato ninguna fuente inflamable sin protección, como velas
por mucho tiempo. • Se till att inte insektsmedel på spraybruk, bensen och
• Neem altijd het netsnoer uit het stopkontakt wanneer het encendidas.
thinner kommer i kontakt med apparatens hölje. • A la hora de deshacerse de las pilas, respete la normativa para el cuidado del medio
apparaat gedurende een lange periode niet wordt gebruikt.
• Koppla ur nätkabeln om apparaten inte kommer att användas ambiente.
i lång tid. • No exponendrà el aparato al goteo o salpicaduras cuando se utilice.
• Handle the power cord carefully. • No se colocaràn sobre el aparato objetos llenos de líquido, como jarros.
Hold the plug when unplugging the cord.
• Gehen Sie vorsichtig mit dem Netzkabel um. WAARSCHUWING:
Halten Sie das Kabel am Stecker, wenn Sie den Stecker • De ventilatie mag niet worden belemmerd door de ventilatieopeningen af te dekken met
herausziehen. bijvoorbeeld kranten, een tafelkleed, gordijnen, enz.
• Manipuler le cordon d’alimentation avec précaution. • Plaats geen open vlammen, bijvoorbeeld een brandende kaars, op het apparaat.
Tenir la prise lors du débranchement du cordon. • Houd u steeds aan de milieuvoorschriften wanneer u gebruikte batterijen wegdoet.
• Manneggiate il filo di alimentazione con cura. • Stel het apparaat niet bloot aan druppels of spatten.
Agite per la spina quando scollegate il cavo dalla presa. • Never disassemble or modify the apparatus in any way.
• Versuchen Sie niemals das Gerät auseinander zu nehmen • Plaats geen voorwerpen gevuld met water, bijvoorbeeld een vaas, op het apparaat.
• Maneje el cordón de energía con cuidado. * (For apparatuses with ventilation holes)
oder auf jegliche Art zu verändern.
Sostenga el enchufe cuando desconecte el cordón de • Do not obstruct the ventilation holes. • Ne jamais démonter ou modifier l’appareil d’une manière ou
OBSERVERA:
energía. • Die Belüftungsöffnungen dürfen nicht verdeckt werden. • Ventilationen bör inte förhindras genom att täcka för ventilationsöppningarna med föremål
• Hanteer het netsnoer voorzichtig. d’une autre.
• Ne pas obstruer les trous d’aération. såsom tidningar, bordsdukar, gardiner osv.
Houd het snoer bij de stekker vast wanneer deze moet • Non smontate mai, né modificate l’unità in nessun modo.
• Non coprite i fori di ventilazione. • Inga blottade brandkällor, såsom tända ljus, bör placeras på apparaten.
worden aan- of losgekoppeld. • Nunca desarme o modifique el equipo de ninguna manera.
• No obstruya los orificios de ventilación. • Tänk på miljöaspekterna när du bortskaffar batteri.
• Hantera nätkabeln varsamt. • Nocit dit apparaat demonteren of op andere wijze
• De ventilatieopeningen mogen niet worden beblokkeerd. • Apparaten får inte utsättas för vätska.
Håll i kabeln när den kopplas från el-uttaget. modifieren.
• Täpp inte till ventilationsöppningarna. • Inga objekt med vätskor,såsom vaser, får placeras på apparaten.
• Ta inte isär apparaten och försök inte bygga om den.
II
ENGLISH
ENGLISH
Acoustic Sponge·············································································2 operation, please read this owner’s manual carefully before using the Consider the points listed below before installing the speaker.
How to Install··················································································2 product.
Cleaning··························································································2 After reading them, be sure to keep them for future reference. • If the bass sound is overemphasized when the speakers are installed
Other Cautions················································································2 directly on the floor, set them on concrete blocks or other hard
stands.
Accessories • Note that placing the speaker on the same stand or shelf as a record
Connections Check that the following parts are attached in addition to the main player may result in howling.
Connections·····················································································3 unit: • Also note that if there is a magnet or any device generating magnetic
force nearby, interaction between this device and the speakers can
Removing the Speaker Net···························································· 3 q Owner’s Manual....................................................................... 1
cause the colors on the TV to become blotchy.
w Service station list.................................................................... 1
e Speaker cable (Approx. 9.8 ft / 3 m)......................................... 2 WARNING
Specifications·················································································· 4 r Foam plug................................................................................. 2 • Fasten the speaker cables to the wall, etc., to avoid catching them on
t Anti-slip pads (8 pcs. / 1sheet)................................................. 1 your hands or feet and causing the unit to fall.
Specifications
• Be sure to check for safety after installing the speakers. Afterwards,
e r
perform safety inspections at regular intervals to make sure there at
the speakers will fall.
DENON will accept no responsibility for damages or accidents
caused by inappropriate choice of the place of installation or improper
installation procedures.
[Front] [Rear]
Note that the illustrations in this instructions may differ from the actual
set for explanation purposes.
1
ENGLISH
ENGLISH
Getting Started
hen installing on a desktop or in the corner of your room, the bass
W Attach four of the included anti-slip pads to the bottom of the unit as • Use a wiping cloth and wipe lightly to remove dirt from the cabinet
may emphasized. Insert sound foam plug in the bass-reflex duct at the shown on the diagram below. and operation panel.
back of the SC-M37. ※ When using chemically treated cloths, follow the precautions that
You can adjust the bass sound with the amount of sound foam plug have been written for them.
[Bottom]
Other Cautions
Anti-slip pads
• Raising the amplifier’s volume excessively and playing with distorted
sound could damage the amplifier and speakers. Enjoy the sound at
a reasonable volume level.
• When moving the unit, note that applying strong force to the surface
of the speaker through the saran net could damage the speaker.
Foam plug
Specifications
CAUTION
• Do not insert the foam plug too deep. The foam plug could fall in and
get stuck inside.
• If the foam plug cannot be removed or falls inside, stop using the
unit immediately and consult your store of purchase or your nearest
repair and inquiry center.
2
ENGLISH
Connections
Getting Started
Use the included speaker cable to connect the input terminals on the
Connections back of the speakers to the amplifier’s speaker output terminals. Removing the Speaker Net
When connecting, be sure to read the amplifier’s owner’s manual • The net on the front of the speakers can be removed.
Connections Removing the Speaker Net
carefully and connect properly. “–” side “+” side terminal: Red • To remove, grasp both sides of the net and pull forward.
• Connect the input terminals on the rear panel of the speaker with the terminal: Black • To mount, line up the projecting pieces in the four corners of the
speaker output terminals on the amplifier, using the speaker cables speaker net with the holes in the four corners of the cabinet and
(Supplied). press in.
• Connect the speaker for the left channel to the “L” terminal on the
amplifier, the speaker for the right channel to the “R” terminal on the Connect to amplifier’s
amplifier, making sure to check the polarities (“+” and “–”). “+”side: Plain core
• There are various types of speaker output terminals on amplifiers.
Check your amplifier’s owner’s manual.
CAUTION
Connect to amplifier’s
• Be sure to turn the amplifier’s power off before connecting the
“–” side: Striped core
speakers to the amplifier.
• If the polarities are inverted, the phase may be off and the sound
may have no bass component, making it seem unnatural. Be sure to
Specifications
1
connect the polarities properly. Twist firmly the wires by hand so Sheath
that they do not stick out and cause
short-circuits.
CAUTION
Do not let the core wires of two speaker cables touch each other.
Doing so will short-circuit the amplifier circuitry and damage the
amplifier.
3
ENGLISH
Getting Started
Specifications
b For improvement purposes, specifications and design are subject to change without notice.
Specifications
4
www.denon.com
Denon Brand Company, D&M Holdings Inc.
Printed in China 5411 10061 007D