Professional Documents
Culture Documents
SXC-1080 User Manual Ed 00
SXC-1080 User Manual Ed 00
SXC-1080
CDMA 1x USB MODEM
Table of Contents
Table of Contents Introduction For Your Safety Parts of the USB Modem Installing Software
A. Installing Dialer Client
2 3 4 5 6
6
Window Network Connection Setting Setup Info PIN Code SMS Write/Send SMS Inbox Sent Message
15 15 16 17 18 19 21 22
12
12 13 13 13 15
24 26 28 30
2
Introduction
Congratulations on your purchase of the advanced and compact SXC-1080 USB Modem, designed to operate with the latest digital mobile communication technology. Please carefully read these guidelines before you proceed. These safety warranty and cautions are very important for proper usage of SXC-1080.
Warning
USB Modem must not be used in an aircraft at all times. Do not use your Modem near petrol stations, fuel depots, chemical plants or blasting operations. For your safety, use the ONLY specific PC. Do not handle the modem with wet hands while it is being operated. It may cause an electric shock or damage your modem seriously.
Caution
Do not use the modem in areas with special regulations against electronic usage. (i.e. The hospitals where sensitive medical equipment can be affected by Modem usage) Only use ORIGINAL accessories to avoid damage to your modem. All radio transmitters carry risks of interference with electronics in close proximity. Minor interference may affect TVs, radios, PCs, etc.
The User Guide contains important information on the proper use and correct operation of SXC-1080 USB Modem. Please read carefully to ensure optimal performance and also to prevent any misuse of the product, as any improper usage outside of this User Guide may result in warranty void.
Installing Software
USB Connector
R-UIM Socket
U Q 3. Clicking U s e r M a n u a l or Q u i c k G u i d e & T r o u b l e S h o o t i n g icon in the first screen will prompt you to O S O p e n or S a v e the Manual. Click O O p e n to see the Manual or click S S A V E to save the Manual into your PC.
Installing Software
4. When the InstallShield wizard window N appear as follow, click the N e x t to continue for the next step. 7. A window will appear as shown to indicate that InstallShield Wizard completed is F completed. Click F i n i s h to exit the wizard.
Installing Software
Installation time for completion can be different up to user's PC spec.
6. When the next screen appears, the program is ready to be installed, click the I I n s t a l l button to begin installation. 5. Default installation directory is C C : \ P r o g r a m F i l e s \ E p i v a l l e y \ T A T A I n d i c o m D i a l e r . which can be changed C by clicking on C h a n g e button. TATA Indicom Dialer has been successfully installed. Click Next to proceed to the next step. 8
N o t e : Since Driver is to be installed automatically, please do not unplug the USB modem from the PC while driver installation.
Installing Software
Read the licence agreement and then click Yes to proceed to the next step. If you do not agree, click No to abort installation.
Installing Software
Click Install to start installing Speed+. Click Finish to finish the installation procedure. The following screen captures demonstrate Speed+ installation procedure. 9
Starting to install Speed+ 4.3.0 Read about Speed+ and then click Next to proceed to the next step. Network connection will become unavailable while the installation is in progress. Before starting installation, save all open documents and close all applications. Click Next to start installation.
Choose a directory for installation files. Click Next to proceed to the next step.
10
Installing Software
Starting to install the application. When installation files are completely copied, the installation screen automatically moves to the next step.
The main window has 6 Menu Buttons with specific functions. You should select appropriate connection from the SELECT menu before connecting to internet. And after selecting the connection, click the CONNECT button on the dialer.
The application has been installed. The system should be restarted to apply the installed program. Click Finish to finish the installation procedure. 11
After initialization, the main window of application will be displayed in the screen as shown. 12
Disconnect
If you want to disconnect wireless D network, click the D i s c o n n e c t button in the main window. and will disconnect the dialup connection.
13
Use left, right arrow buttons to select a phone number and use copy/move option to synchronize the selected number.
14
Dial Number. Also you can make multiple profiles to access the internet and see the internet Call logs.
] S h o w I n t e r n e t L o g : If you click
this button, you can acknowledge used data volume and time. 3. C o n n e c t i o n S e t t i n g
To choose Profile name, please follow below procedure. S Click the S e t u p s c r e e n -> Click N the N e t w o r k -> Click the C C o n n e c t i o n S e t t i n g Network Connection Settings screen will be shown as below. Choose the profile name you want to set.
receives messages, it sounds to announce. To return main window, click the C C l o s e button. 15 2. N e t w o r k In Network you can set Dial-Up connection's Username, Password and 16
17
18
to transmit just the sender number without the contents. 3. When the message is being sent, the following window will be shown and you will be returned to the main window automatically after message has been sent successfully.
the phonebook instead of typing a recipient number (Except for phonebook stored in R-UIM).
] When you click To, the Address
If you do not know your PUK Code, please contact the service provider. 19
book window will appear and you can select recipients from your address book. 2. Write a message in the blank box, and S click theS e n d button. * N o t e : The C a n c e l function will C not work when the message to be sent is already in progress. 20
SMS Inbox
You will be alerted when you receive new SMS. All new SMS will be stored in the S S M S I n b o x menu. In SMS Inbox, you can identify each message by Date, Name, Number etc.
22
Linux
6. A configuration file will be created as below [Dialer Defaults] Modem = /dev/ttyACM0 Baud = 460800 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ISDN = 0 Modem Type = USB Modem ; Phone = <Phone number> ; Username = <Username> ; Password = <Password> 7. But the user still need to edit /etc/wvdial.conf to specify the phone number, login name, and password of your internet account in order for wvdial to work.
23
24
Linux
8. User should edit the configuration file as given below. [Dialer Defaults] Modem = /dev/ttyACM0 Baud = 460800 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ISDN = 0 Modem Type = USB Modem Phone = #777 Username = internet Password = internet stupid mode = 1 25
Troubleshooting
How to connect Internet
1. Open the terminal. 2. Type wvdial and press enter. M 1. The message M o d e m d r i v e r n o t installed. Install driver and restart p r o g r a m is displayed on the Dialer Client. ] Dialer Client is not installed properly, Reinstall Dialer Client. 2. There is no Antenna indicator on the n Dialer Client and n o s v c is displayed and the LED of USB Modem is in red. ] Modem Number is registered incorrectly. Please contact service provider for more information. M 3. The message M o d e m u n p l u g g e d . P l u g m o d e m is displayed on the Dialer Client. ] USB Modem is not connected to PC. If connected, separate USB Modem from PC, and reconnect one minute after. Next, go to Start > Control Panel > System > H a r d w a r e > D e v i c e M a n a g e r to check whether USB Modem is in it. If Modem is not in the list, remove USB Modem from PC and reconnect after one minute. I 4. The message I n v a l i d M o d e m P o r t , R e i n s t a l l d r i v e r is displayed on the Dialer Client. ] The PC recognizes USB Modem as a different system. Remove USB Modem from PC, and reconnect after one minute. Next, go to S t a r t > S e t t i n g > C o n t r o l Panel > System > Hardware > D e v i c e M a n a g e r to check whether USB Modem is in it. If Modem is not in the You may find below a series of solutions to troubleshoot some known problems that may occur when using SXC-1080 USB Modem along with certain types of hardware.
26
Troubleshooting
list, remove USB Modem from PC, and reconnect after one minute. If the I Message I n v a l i d M o d e m P o r t continues to appear, please re-install Dialer Client after removing the previous program. 5. Do not remove an R-UIM Card while USB Modem is in use. ] This may harm the PC and Modem. Please use the Safely Remove Hardware command to disconnect the USB Modem first or remove the UIM Card after the PC is shut down. M 6. When M I N _ L O C K message is displayed, ] This message occurred when invalid RUIM card has been inserted.Please ensure that a valid R-UIM card is inserted. P 7. When P H O N E _ L O C K message is displayed, ] This message occurred when invalid RUIM card has been inserted for more than five times. Please contact service provider to unlock. M 8. When the message M I N o u t o f r a n g e is displayed, ] Please enter valid MIN. C 9. The message C o n n e c t appears even after connecting the Internet. C ] Do not click C o n n e c t again. It is necessary to take time to connect to the D Internet using the D i a l - u p n e t w o r k. 10. If you fail to input correct pin number, please contact service provider. 11. For software upgrade and customer support, please visit at w w w . s i t s v c . c o m
Function SXC-1080 Remarks Function Data Rate
Specification
SXC-1080 Up to 153 Kbps (TX:153Kbps / RX:153Kbps) Feed through : Packet data, A sync data Protocol : SMS, Simple IP Connector & Switches Hardware Interface USB Power Software Interface USB Power input connector USB 1.1 and 2.0 IS-707.3 AT Command set Remarks
Main Operation MSM6025, RFR6122, RFT6122 Chip CDMA Standard TIA/EIA/IS-2000, IS-98D, Backwards compatibility with IS-95 A/B Cellular 800 Single Band Support Band Class 0 TX: 824 ~ 849 MHz RX: 869 ~ 894 MHz Transmit Power 200mW Power supply 4.5 ~ 5.5V DC
Data options
27
28
Specification
Function LEDs PRL/OTA support Phone book Antenna Connect Installation Dimension SXC-1080 2 LED (Power) Use R-UIM Use PC UI Application Internal type USB Power input connector Laptop Computer/ USB Desktop PC Interface W: 88, D: 28.9, H: 10.6 (mm) Net (19.5g), Gift box (100g) Remarks 3 colour LED Function O/S support SXC-1080 MS Windows: 2000, XP and Vista (32 & 64 bit) * WHQL certified by Microsoft Linux (Internet use only): Redhat Enterprise 3&4 Fedora Core 5 & 6 SUSE Desktop 9 & 10 Debian 5 & 6 Ubuntu 5 & 6 Remarks
Supplied Accessory
Gift box Installation CD
29
Weight
30
Memo
Memo
ED : 03
ED : 02