Professional Documents
Culture Documents
Sheet Metal Design Guideline 98053007 30006
Sheet Metal Design Guideline 98053007 30006
0 1
PAGE
0 1
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
21 22
21
20
19
02
18
17
16
15
07
12
27 28
26
25
24
23
01
05 14 01 12 07 11 01 02 03 04 05 06 07 08 01 09 10 13
THE MOST COMMONLY SHEET METAL FEATURES: No.| FEATU RE NAME Cu t ou t f eatu r es 01 HO LE 11 P ERFO RATED Bendi ng f eatu r es 02 BEND 10 HEM 04 CU RL 20 TAB 06 O FFS ET BENDS 28 U -BEND No.| FEATU RE NAME 05 RELIEF No.| FEATU RE NAME 09 NO TCH
13 CO U NTERS INK
21 CO RNER
For m ed f eatu r es 03 EXTRU DE FO RM 12 LANCE FO RM 16 HALF-S HEARING 19 S TAMP ING ICO NS 27 S P O O N 24 EXTRU DED HO LE 07 EMBO S S 14 HO O K FEATU RE 08 CO INING EDGE 15 RIB 18 DIMP LE
23 RO U ND HEM 26 GU S S ET
Notes (f or thi s Desi g n Gu i del i ne sp ec i f i c ati on): 1. The m ater i al i s l ow c ar bon steel ; 2. The standar d m ater i al thi c k ness r ang i ng f r om .030 to .059;
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
Sheet Metal Design Guidelines H o le F o x c o nn . do c _ r ev . 0 1 TI TLE: HOLE & SLOT ( P UNCH) ( #0 1 ) DESCRI P TI ON: A c u t i n the m i ddl e of the sheet m etal su r f ac e i s c al l ed a Hol e.
DESI GN GUI DELI NE: The m i ni m u m di am eter of a hol e (or wi dth of a sl ot) shou l d be eq u al to 1.2 ti m es m ater i al thi c k ness p l u s .008, or .048, whi c hev er i s g r eater . HOLE
D (m i ni m u m ) = 1.2x T + .008, or .048, whi c hev er i s g r eater Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D m odel shou l d i nc l u de the hol e di am eter , l eng th and wi dth of the sl ot.
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
Sheet Metal Design Guidelines H o le F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON Ho l e t o Ho l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (G) between hol es i s di r ec tl y p r op or ti onal to the si z e and shap e of the hol es and the m ater i al thi c k ness. Bu t the m i ni m u m di stanc e between c i r c u l ar hol es i s 1.2 ti m es m ater i al thi c k ness. Ho l e t o Edg e Des i g n Gu i del i n e: The m i ni m u m di stanc e (G) between a hol e and the edg e of the m ater i al m u st be m ai ntai ned. The m i ni m u m r ec om m ended di stanc e between the hol e and the edg e i s di r ec tl y p r op or ti onal to the si z e and shap e of the hol e and the m ater i al thi c k ness. Fea t u r e P o s i t i o n
D: Di am eter or m i ni m u m di m ensi on of sl ot L: Leng th of sl ot T: Mater i al Thi c k ness G: m i ni m u m Di stanc e di m ensi on When L i s T to 10T then m i ni m u m G = 2T When L i s 10T to 25T then m i ni m u m G = 4T When L i s ov er 25T then m i ni m u m G = 6T Rec o m m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
Sheet Metal Design Guidelines H o le F o x c o nn . do c _ r ev . 0 1 Ho l e t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) between the edg e of a hol e to a bend i s two ti m es the m ater i al thi c k ness p l u s the r adi u s of the bend. Sl o t t o Ben d Des i g n Gu i del i n e: The m i ni m u m di stanc e (D3) f r om the i nsi de su r f ac e of a bend to the edg e of a sl ot i s di r ec tl y p r op or ti onal to the l eng th of the sl ot, m ater i al thi c k ness and the r adi u s of the bend. Ho l e t o Fo r m Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D4) f r om the f or m i s thr ee ti m es the m ater i al thi c k ness p l u s the f or m r adi u s.
Ho l e t h r o u g h a Ben d Des i g n Gu i del i n e: When a hol e g oes thr ou g h a bend, the l eadi ng edg es of the hol e shou l d ex tend a m i ni m u m di stanc e (D5) bey ond (or both si des of ) the bend. Thi s m i ni m u m di stanc e shou l d be two ti m es the m ater i al thi c k ness or the thi c k ness of m ater i al p l u s the r adi u s of a bend, whi c hev er i s g r eater . Fea t u r e P o s i t i o n
D2 (m i ni m u m ) = 2T + R1 When R1 = <.118 and L < 1.0 then D3 (m i n) = 2.5T + R1 L i s 1.0 to 2.0 then D3 (m i n) = 3T + R1 L > 2.0 then D3 (m i n) = 3.5T + R1 When R1 > .118 and L i s l ess than 20T then D3 (m i n) = 3.5T + R1 L i s ov er 20T then D3 (m i n) = 6T + R1 D4 (m i ni m u m ) = 3T + R2 D5 (m i ni m u m ) = 2T or T + R1, whi c hev er i s g r eater Rec o m m en ded 0 5/ 30 / 20 0 7 F O X C O N N C o nf idential 5
Sheet Metal Design Guidelines R elief F o x c o nn . do c _ r ev . 0 1 TI TLE: RELI EF ( #0 5 ) DESCRI P TI ON: When a bend does not ex tend the enti r e l eng th of a p ar t, or a f or m i s c l ose to other sheet m etal f eatu r es, the r el i ef c an hel p c ontr ol the sheet m etal m ater i al behav i or and p r ev ents u nwanted def or m ati on. The r ec om m ended r el i ef ty p e i s r ec tang u l ar . The obr ou nd ty p e r el i ef i s p r ef er r ed. (H/ T)
DESI GN GUI DELI NE: The m i ni m u m dep th of a bend r el i ef (D) i s eq u al to the m ater i al thi c k ness p l u s the r adi u s of a bend. The m i ni m u m wi dth (W) of a bend r el i ef i s eq u al to 1.5 ti m es m ater i al thi c k ness or 0.059 (1.50m m ), whi c hev er i s g r eater . RELI EF
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y show f ol l owi ng i nf or m ati on: r el i ef wi dth (W), r el i ef l eng th (D).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
Sheet Metal Design Guidelines R elief F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON Rel i ef t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e between a r el i ef and a bend f ol l ows the r u l es of a hol e to a bend. The m i ni m u m r ec om m ended di stanc e (D) i s thr ee ti m es the m ater i al thi c k ness. Fea t u r e P o s i t i o n
Mak e the r el i ev es to g o thr ou g h the bend i f D(m i ni m u m ) i s l ess than 3T Rec o m m en ded
No t Rec o m m en ded
D(m i ni m u m ) < 3T
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
Sheet Metal Design Guidelines N o tc h F o x c o nn . do c _ r ev . 0 1 TI TLE: NOTCH ( #0 9 ) DESCRI P TI ON: An i ntr u si on or c u t i nto the edg e of the sheet m etal i s c al l ed a Notc h.
DESI GN GUI DELI NE: The m i ni m u m p r ef er r ed wi dth of a notc h i s .060 or 1.5 ti m es the m ater i al thi c k ness whi c hev er i s g r eater . Ty p i c al notc h l eng th c an be u p to f i v e ti m es the wi dth, when p u nc hed at the m i ni m u m wi dth di m ensi on. NOTCH
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y show f ol l owi ng i nf or m ati on: notc h wi dth (W).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
Sheet Metal Design Guidelines N o tc h F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON No t c h t o No t c h Des i g n Gu i del i n e: The m i ni m u m ti m es the m ater i al thi c k ness. r ec om m ended di stanc e (D1) between notc hes i s two
No t c h t o Ho l e o r Cu t o u t Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) m u st be m ai ntai ned between a hol e and edg e of a notc h. The m i ni m u m r ec om m ended di stanc e i s 1.2 ti m es the m ater i al thi c k ness. No t c h t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D3) f r om the i nsi de su r f ac e of the bend to the edg e of a notc h shou l d f ol l ow r ec om m endati on f or sl ot to bend on p ag e 4. No t c h t h r o Des i g n Gu notc h shou of m ater i al u g h a Ben d i del i n e: When a notc h g oes thr ou g h a bend, the bottom or si de edg es of the l d ex tend a m i ni m u m di stanc e (D4) bey ond the bend, eq u al to the thi c k ness p l u s the bend r adi u s.
Fea t u r e P o s i t i o n
L: sl ot l eng th D1 (m i ni m u m ) = 2T D2 (m i ni m u m ) = 1.5T When L i s l ess than 1.0 then D3 (m i ni m u m ) = 2.5T + R When L i s 1.0 to 2.0 then D3 (m i ni m u m ) = 3T + R When L i s ov er 2.0 then D3 (m i ni m u m ) = 3.5T + R D4 (m i ni m u m ) = T + R or 2T, whi c hev er i s g r eater Rec o m m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
Sheet Metal Design Guidelines P er f o r ated m etal F o x c o nn . do c _ r ev . 0 1 TI TLE: P ERFORATED METAL ( #1 1 ) DESCRI P TI ON: A p atter n wi th hol es on sheet m etal su r f ac e i s c al l ed p er f or ated m etal .
DESI GN GUI DELI NE: The r ec om m ended m i ni m u m 1.2 ti m es the m ater i al thi c k ness.
P ERFORATED HOLE
D (m i ni m u m ) = 1.2 T Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D m odel shou l d c ar e f or the di stanc e (D) between the hol es. If f or ai r f l ow r eason the abov e r ec om m ended di m ensi on c annot be m et, one c an c onsi der the f ol l owi ng : 1. For c osm eti c p er f or ated p ar t, sandwi c h an of f -the-shel f p er f or ated m ater i al between two sheet m etal p ar ts. 2. For non-c osm eti c p er f or ated p ar t, ac c ep t def or m ati on and/ or m ater i al br eak ag e.
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
10
Sheet Metal Design Guidelines P er f o r ated m etal F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON P er f o Des i g Fr om Fr om r a t ed h o l e t o Ben d n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D) i s: the edg e of a c i r c u l ar hol e to a bend (D1) i s thr ee ti m es the m ater i al thi c k ness. the r ec tang u l ar hol e to a bend (D2) i s eq u al to 3.5 ti m es the m ater i al thi c k ness. Fea t u r e P o s i t i o n
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
11
DESCRI P TI ON: A Cou nter si nk i s a c oni c al dep r essi on at an ex i sti ng hol e i n the sheet m etal su r f ac e. A c ou nter si nk u su al l y u sed i n c onj u nc ti on wi th har dwar e.
S (r ec om m ended) = .008 Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: m i ni m u m nec k hei g ht (S ), m aj or di am eter of the c ou nter si nk (D), thr ou g h hol e di am eter (d) and ang l e of the c ou nter si nk (A). Al l these i nf o shou l d m atc h wi th c or r esp ondi ng har dwar e u sed.
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
12
Sheet Metal Design Guidelines C o unter sink F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON Co u n t er s i n k t o Fo r m Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) between the m aj or di am eter of a c ou nter si nk and a f or m i s f ou r ti m es the m ater i al thi c k ness p l u s the f or m r adi u s. Co u n t er s i n k t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) between the m aj or di am eter of a c ou nter si nk and a bend i s f ou r ti m es the m ater i al thi c k ness p l u s the bend r adi u s. Co u n t er s i n k t o Co u n t er s i n k Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D3) between the m aj or di am eter s of two c ou nter si nk s i s eq u al to si x ti m es the m ater i al thi c k ness. Co u n t er s i n k t o Edg e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D4) between the m aj or di am eter of a c ou nter si nk and an edg e i s f ou r ti m es the m ater i al thi c k ness. Fea t u r e P o s i t i o n
D1 (m i ni m u D2 (m i ni m u D3 (m i ni m D4 (m i ni m Rec o m
m )= m )= u m u m m en
4T + R2 4T + R1 ) = 6T ) = 4T ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
13
Sheet Metal Design Guidelines C o r ner F o x c o nn . do c _ r ev . 0 1 TI TLE: CORNER ( #2 1 ) DESCRI P TI ON: The c or ner s i nc l u de the shar p , r adi u s (f i l l et) and c ham f er ed.
DESI GN GUI DELI NE: For a r adi u s (f i l l et) c or ner , the m i ni m u m nev er be l ess than .012 (H/ T) or .059 (S / T). CORNER Ra di u s
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: c or ner of the g eom etr y and the ou ter and i nner c or ner shou l d add r adi u s.
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
14
Sheet Metal Design Guidelines C o r ner F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON Co r n er t o Ben d Des i g n Gu i del i n e: 1. For Radi u s Cor ner , the m i ni m u m r ec om m ended di stanc e between r ou nd to the bend i s 2.5 ti m es the m ater i al thi c k ness p l u s .059. CORNER - Ra di u s
2. For Cham f er Cor ner , the m i ni m u m r ec om m ended di stanc e between c ham f er to the bend i s 2.5 ti m es the m ater i al thi c k ness p l u s .059. CORNER - Ch a m f er
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
15
Sheet Metal Design Guidelines C o r ner F o x c o nn . do c _ r ev . 0 1 Co r n er a n d p a i n t ( f i n i s h ) Des i g n Gu i del i n e: The S har p Cor ner wi l l l ead to p ai nti ng p r obl em s i f the c or ner su r f ac es wi l l be p ai nted. CORNER
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
16
Sheet Metal Design Guidelines B ending F o x c o nn . do c _ r ev . 0 1 TI TLE: BENDI NG ( #0 2 ) DESCRI P TI ON: A bend i s a f or m that m ak es the sheet m etal wal l i nto an ang u l ar shap e.
DESI GN GUI DELI NE: The bend has two c har ac ter i sti c s: the bendi ng ang l e and the bendi ng r adi u s. The m ax i m u m r ec om m ended r adi u s f or a bend i s .020. A bendi ng ang l e i s r ec om m ended to be a r i g ht or obtu se ang l e. BENDI NG
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: m i ni m u m bendi ng r adi u s(R) and bendi ng ang l e (A).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
17
Sheet Metal Design Guidelines B ending F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON Ben d t o edg e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended hei g ht (H) of a bend f l ang e m easu r ed f r om the i nsi de su r f ac e of the bend i s eq u al to 2.5 ti m es the m ater i al thi c k ness p l u s the r adi u s of the bend. Fea t u r e P o s i t i o n
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
18
Sheet Metal Design Guidelines C ur l F o x c o nn . do c _ r ev . 0 1 TI TLE: CURL ( #0 4) DESCRI P TI ON: A Cu r l i s a f or m that m ak es the sheet m etal f l ang e i nto a r ol l ed shap e. It u su al l y u sed as a m eans of j oi ni ng two c om p onents and i n the f or m of a hi ng e.
DESI GN GUI DELI NE: The m i ni m u m i nsi de r adi u s of a c u r l i s eq u al to two ti m es the m ater i al thi c k ness; the m i ni m u m op eni ng g ap i s eq u al to one m ater i al thi c k ness. CURL
G (m i ni m u m ) = T R (m i ni m u m ) = 2T Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: m i ni m u m op en g ap (G), i nsi de r adi u s (R).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
19
FEATURE P OSI TI ON Cu r l t Des i g Fr om the c u Fr om the c u o Ho n Gu ac u r r l. ac u r r l. le i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) f r om a hol e i s: l to the edg e of a hol e (D1a): one ti m es the m ater i al thi c k ness p l u s r adi u s of l to the edg e of a sl ot (D1b): two ti m es the m ater i al thi c k ness p l u s r adi u s of
Cu r l t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) that a c u r l shou l d be f r om a bend i s: As an i nter nal bend (D2a): ni ne ti m es the m ater i al thi c k ness p l u s the i nsi de r adi u s of the c u r l. As an ex ter nal bend (D2b): si x ti m es the m ater i al thi c k ness p l u s the i nsi de r adi u s of the c u r l. Fea t u r e P o s i t i o n
D1a (m i ni m u m ) = T + R When L i s l ess than .39 then D1b (m i ni m u m ) = 2T + R When L i s .39 to 1.96 then D1b(m i ni m u m ) = 6T+ R When L i s ov er 1.96 then D1b(m i ni m u m ) = 10T D2a (m i ni m u m ) = 9T + R D2b (m i ni m u m ) = 6T + R Rec o m m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
20
Sheet Metal Design Guidelines O f f set b ends F o x c o nn . do c _ r ev . 0 1 TI TLE: OFFSET BENDS ( #0 6) DESCRI P TI ON: An of f set bend, or a j og g l e, i s two v er y shor t bends (2K <H wher e K i s the K f ac tor ) f or m ed si m u l taneou sl y . It i s u sed to j og g l e other sheet m etal su r f ac e or ser v e as a g u i de.
DESI GN GUI DELI NE: The r ec om m ended bends ang l es ar e obtu se ang l es or r i g ht ang l es. The m ax i m u m hei g ht (H) of an of f set bend i s f i v e ti m es of the m ater i al thi c k ness. OFFSET BENDS
H (m ax i m u m ) = 5T
A2 (r ec om m ended) 90 If H i s ov er 2T then R (r ec om m ended) = .039 Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: of f set bends hei g ht (H), f i x ed si de ang l e (A1), f i x ed bend r adi u s (R0), bend c r eati ng si de r adi u s (R), ang el (A2).
A1 (m i ni m u m ) = 90 r
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
21
Sheet Metal Design Guidelines O f f set b ends F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON Of f s et b en ds t o Rec t a n g u l a r Ho l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) f r om the bend i nsi de su r f ac e to the edg e of a hol e i s eq u al to ei g ht ti m es the m ater i al thi c k ness p l u s the r adi u s of bend. Of f s et b en ds t o Ex t r u ded h o l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) f r om the bend i nsi de su r f ac e to the m aj or di am eter of ex tr u si on i s eq u al to 2.5 ti m es the m ater i al thi c k ness. Fea t u r e P o s i t i o n
When L i s l ess than .80 then D1 (m i ni m u m ) = 8T + R When L i s ov er .80 then D1 (m i ni m u m ) = 12T + R (i f the p u nc h di r ec ti on i s downwar d, then D1(m i ni m u m ) c an be 3T) D2 (m i ni m u m ) = 2.5T Rec o m m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
22
F o x c o nn . do c _ r ev . 0 1
DESCRI P TI ON: A Hem has a f u l l r ou nd f eatu r e and a r etu r n f l ang e. It i s u sed as a m ethod of el i m i nati ng shar p edg e or to p r ov i de addi ti onal sti f f ness to the edg e of a su r f ac e. Ther e ar e thr ee ty p es of hem : c l osed hem , op en hem and tear dr op hem . The c l osed hem i s the str ong l y r ec om m ended op ti on i f the hem i s onl y u sed as a m ethod of el i m i nati ng shar p edg e. The tear dr op hem i s not r ec om m ended.
DESI GN GUI DELI NE: 1. For the c l osed hem (no i nsi de r adi u s), r etu r n f l ang e l eng th (H) f r om ou tsi de the bend shou l d be eq u al to or g r eater than f ou r ti m es the m ater i al thi c k ness. Thi s ty p e of hem (c l osed hem ) i s not recommended i n the f ol l owi ng si tu ati on: The hem g eom etr y wi l l be p ai nted; The m ater i al i s S S T & al u m i nu m ; The p ar t i s p ost p l ated; Cl o s ed Hem
F o x c o nn . do c _ r ev . 0 1
GUI DELI NES FOR 3D GEOMETRY: 3D g eom etr y of c l osed hem shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: the r etu r n f l ang e l eng th (H) and the z er o r adi u s of the i nsi de r adi u s. 2. For op en Hem ( the bend ang l e i s 180 ), the m i ni m u m i nsi de di am eter shou l d be eq u al to the m ater i al thi c k ness, r etu r n f l ang e l eng th (H) f r om ou tsi de the bend i s eq u al to or g r eater than si x ti m es the m ater i al thi c k ness. The g ap (G) c an be set by i nc r em ents of the m ater i al thi c k ness. Op en Hem
D (m i ni m u m ) = G H (m i ni m u m ) = 6T
3T
GUI DELI NES FOR 3D GEOMETRY: 3D g eom etr y of op en hem shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: the r etu r n f l ang e l eng th (H), the i nsi de di am eter (D) and the op eni ng g ap (G). Ti p s f o r t h e Op en Hem The r ec om m ended op ti on f or O p en Hem shown i n bel ow i m ag e i s onl y u sed f or H/ T. The di m p l es on the r etu r n f l ang e ar e u sed to ensu r e the g ap of the op en hem . The g ap of an op en hem shou l d be m or e than .020 i f the m ater i al i s CRS . Op en Hem
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
24
F o x c o nn . do c _ r ev . 0 1
3. For the tear dr op Hem (the bend ang el i s g r eater than 180 ), the m i ni m u m di am eter shou l d be eq u al to the m ater i al thi c k ness, r etu r n f l ang e hei g ht f r om ou tsi de the bend i s eq u al to or g r eater than si x ti m es the m ater i al thi c k ness. The r ec om m ended m i ni m u m hem op eni ng g ap shou l d be eq u al to of the m ater i al thi c k ness. If the m ater i al i s GI, the Tear dr op hem g eom etr y i s not r ec om m ended.
Tea r dr o p Hem
D (m i ni m u m ) = T, H (m i ni m u m ) = 6T, G (m i ni m u m ) = 1/ 4T No t Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D g eom etr y of Tear dr op hem shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: the r etu r n f l ang e l eng th (H), the i nsi de di am eter (D) and the g ap (G).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
25
Sheet Metal Design Guidelines H em FEATURE P OSI TI ON Hem t o Ho l e Des i g n Gu i del i n e: The m i ni m u m The m i ni m u m di stanc e (D1a) f r om of a hem i s two ti m es the m ater i al The m i ni m u m di stanc e (D1b) f r om edg e of the r etu r n f l ang e i s f i v e ti m
F o x c o nn . do c _ r ev . 0 1
r ec om m ended di stanc e (D1) i s: the edg e of the hol e shou l d be f r om the ou tsi de edg e thi c k ness p l u s the r adi u s of the hem . the edg e of the sl ot hol e shou l d be f r om the l eadi ng es the m ater i al thi c k ness. a bend i s:
Hem t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) f r om As an i nter nal bend (D2a): si x ti m es the m ater i al thi c k ness. As an ex ter nal bend (D2b): f ou r ti m es the m ater i al thi c k ness.
Hem t o f o r m Des i g n Gu i del i n e: the m i ni m u m r ec om m ended di stanc e (D3) f r om the ou tsi de edg e shou l d be f r om the ou tsi de edg e of a hem i s f i v e ti m es the m ater i al thi c k ness. Fea t u r e P o s i t i o n
) = 2T + R ) = 5T ) = 6T ) = 4T m ) = 5T m en ded
u m u m u m u m
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
26
F o x c o nn . do c _ r ev . 0 1
Hem t o Hem Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D4) between two hem s wou l d hav e to be ev al u ated base u p on sp ec i f i c desi g n r eq u i r em ent. Ther e ar e two ty p es her e: Both the hem s on the sam e si de: the di stanc e (D4a) i s eq u al to the m ater i al thi c k ness. Both the hem s on the di f f er ent si des: the di stanc e (D4b) i s eq u al to f i v e ti m es the m ater i al thi c k ness. Fea t u r e P o s i t i o n
D4a (m i ni m u m ) = T D4b (m i ni m u m ) = 5T Rec o m m en ded Op en Hem w i t h a Ben d Des i g n Gu i del i n e: Thi s ty p e hem i nc l u des a i nwar d f l ang e attac hed the edg e of a hem , The m i ni m u m i nsi de di am eter shou l d be eq u al to the m ater i al thi c k ness, r etu r n f l ang e m i ni m u m hei g ht f r om ou tsi de the bend i s eq u al to or g r eater than ei g ht ti m es the m ater i al thi c k ness. The di m p l es or other g eom etr y i s a g ood op ti on to c ontr ol the g ap of an op en hem . A c o m p l ex Hem
F o x c o nn . do c _ r ev . 0 1
Cl o s ed Hem w i t h a Ben d Des i g n Gu i del i n e: Thi s ty p e g eom etr y i nc l u des a ou twar d f l ang e, The hem i s a c l osed ty p e hem , r etu r n f l ang e m i ni m u m l eng th (L) f r om ou tsi de the bend i s eq u al to or g r eater than ei g ht ti m es the m ater i al thi c k ness p l u s the r adi u s of the bend; the f l ang e m i ni m u m hei g ht i s eq u al to 2.5 ti m es the m ater i al thi c k ness. A c o m p l ex Hem
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
28
Sheet Metal Design Guidelines T ab F o x c o nn . do c _ r ev . 0 1 TI TLE: TAB ( #2 0 ) DESCRI P TI ON: A p r otr u si on f r om an edg e i s c al l ed a tab.
DESI GN GUI DELI NE: The m i ni m u m wi dth of a tab i s eq u al to two ti m es the m ater i al thi c k ness or .125, whi c hev er i s g r eater . The m ax i m u m r ec om m ended l eng th (H) of a tab i s f i v e ti m es the wi dth of the tab. TAB
W (m i ni m u m ) = 2T or .125, whi c hev er i s g r eater H (m ax i m u m ) = 5W Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: the tab wi dth (W), tab l eng th (H).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
29
Sheet Metal Design Guidelines T ab F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON Ta b t o Ta b Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D) between tabs i s eq u al to 1.5 ti m es the m ater i al thi c k ness or .060, whi c hev er i s g r eater . Fea t u r e P o s i t i o n
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
30
F o x c o nn . do c _ r ev . 0 1
DESCRI P TI ON: An Ex tr u ded f or m i s a dr awi ng f or m f r om the ex i sti ng hol e on the sheet m etal su r f ac e. The di stor ti on wi l l oc c u r at the f or m c or ner s when f or m ed.
DESI GN GUI DELI NE: The m ax i m u m r ec om m ended hei g ht of the ex tr u ded f l ang e i s eq u al to f ou r ti m es the m ater i al thi c k ness. The m i ni m u m r ec om m ended wi dth of the f or m i s eq u al to two ti m es the f or m hei g ht p l u s thr ee ti m es the m ater i al thi c k ness. The obr ou nd g eom etr y shap e i s the r ec om m ended op ti on f or thi s f or m . EX TRUDED FORM
H (m ax i m W (m i ni m u m A (m ax i m u m Rec o m m
u m )= )= en
) = 4T 2H + 3T 90 DEG ded
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: f or m wi dth (W), f or m hei g ht (H), base r adi u s (R), and tap er ang el (A).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
31
F o x c o nn . do c _ r ev . 0 1
ded f o r m t o Ho l e n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) i s: the edg e of a hol e to the ex tr u ded f or m (D1a) i s f ou r ti m es the m ater i al thi c k ness; the edg e of a sl ot to the f or m (D1b) i s di r ec tl y r el ated to the l eng th of the sl ot and ater i al thi c k ness. to
Ex t r u ded f o r m t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) f r om the ex tr u ded f or m the bend i s ei g ht ti m es the m ater i al thi c k ness p l u s the r adi u s of the bend. Ex t r u ded f o r m t o Edg e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D3) f r om the edg e i s f i v e ti m es the m ater i al thi c k ness. the ex tr u ded f or m
to
Ex t r u ded f o r m t o Ex t r u ded f o r m Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D4) between the f or m s i s ei g ht ti m es the m ater i al thi c k ness. Fea t u r e P o s i t i o n
D1a (m i ni m u m ) = 4T When L i s l ess .40 then D1b (m i ni m u m ) = 4T When L i s .40 to 1.90 then D1b (m i ni m u m ) = 8T When L i s ov er 1.90 then D1b (m i ni m u m ) = 12T D2 (m i ni m u D3 (m i ni m D4 (m i ni m Rec o m 0 5/ 30 / 20 0 7 m )= u m u m m en 8T + R ) = 5T ) = 8T ded 32
F O X C O N N C o nf idential
F o x c o nn . do c _ r ev . 0 1
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
33
Sheet Metal Design Guidelines E m b o ss F o x c o nn . do c _ r ev . 0 1 TI TLE: EMBOSS ( #0 7) DESCRI P TI ON: An Em boss i s a dep r essi on or a dr awi ng to a shal l ow dep th on sheet m etal su r f ac e. An em boss u su al l y wi l l be def i ned by a sp ec i al hei g ht.
DESI GN GUI DELI NE: The m ax i m u m hei g ht of an em boss i s di r ec tl y r el ated to the m ater i al u sed, the m ater i al thi c k ness, the em boss shap e. 1. Em boss wi th a f l at top su r f ac e and c oni c al dep r essi on: The m ax i m u m hei g ht of an Em boss i s eq u al to f i v e ti m es the m ater i al thi c k ness. The r ec om m ended tap er ang l e i s 45. EMBOSS w i t h Fl a t t o p s u r f a c e
H (m ax i m u m ) = 5T, R (m i ni m u m ) = T, A (r ec om m ended) = 45, R0 (r ec om m ended) = m i n r adi u s Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: em boss hei g ht (H), base r adi u s (R), ang el (A), i nsi de r adi u s (R0).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
34
Sheet Metal Design Guidelines E m b o ss F o x c o nn . do c _ r ev . 0 1 2. Em boss wi th ex tr u ded hol e and c oni c al dep r essi on: The m ax i m u m f i v e ti m es the m ater i al thi c k ness; the m i ni m u m wi dth (B) i s.059. EMBOSS w i t h Ex t r u ded h o l e hei g ht of an em boss i s
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: em boss hei g ht (H), bay wi dth (B), base r adi u s (R), tap er ang el (A), i nsi de r adi u s (R0). 3. Em boss wi th Ti nner m an and c oni c al dep r essi on: The m ax i m u m hei g ht of an em boss i s f i v e ti m es the m ater i al thi c k ness. The di am eter of the top su r f ac e shou l d be enou g h f or the swi r l hol e sp ec i f i c ati on. EMBOSS w i t h Ti n n er m a n
H (m ax i m u m ) = 5T B (m i ni m u m ) = .059
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: em boss hei g ht (H), base r adi u s (R), tap er ang el (A), i nsi de r adi u s (R0).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
35
EMBOSS w i t h g en er a l s h a p e
H (m ax i m u R (m i ni m u R1 (m i ni m Rec o m m
m ) = 5T m ) = 5T u m )= T en ded
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: em boss hei g ht (H), base r adi u s (R1), i nsi de c or ner r adi u s (R).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
36
Sheet Metal Design Guidelines E m b o ss F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON Em b o s s t o Em b o s s Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) between the m aj or di am eter s of two em bosses ar e ten ti m es the m ater i al thi c k ness p l u s the em boss r adi i . Em b o s s t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) f r om the m aj or di am eter of an em boss to a bend i s f i v e ti m es the m ater i al thi c k ness p l u s the bend r adi u s and p l u s the Em boss r adi u s. Em b o s s t o h o l e Des i g n Gu i del i n e: The m i ni m of an em boss to a hol e i s eq u r adi u s. To the sl ot hol e, the m i ni m u m an em boss i s eq u al to f ou r ti m u m r ec om m ended di stanc e (D3a) f r om the m aj or di am eter al to f ou r ti m es the m ater i al thi c k ness p l u s the em boss r ec om m ended di stanc e (D3b) f r om the m aj or di am eter of es the m ater i al thi c k ness p l u s the em boss r adi u s.
Em b o s s t o Edg e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D4) f r om the m aj or di am eter of an em boss to an edg e i s f ou r ti m es the m ater i al thi c k ness p l u s the em boss r adi u s. Fea t u r e P o s i t i o n
) = 10T + R1 + R2 ) = 5T + R2 + R3 m ) = 3T + R1 m ) = 4T + R2 ) = 4T + R2 m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
37
Sheet Metal Design Guidelines C o ining E dge F o x c o nn . do c _ r ev . 0 1 TI TLE: COI NI NG EDGE ( #0 8 ) DESCRI P TI ON: An edg e that i s c ham f er ed by a sp ec i al shap e i s c al l ed Coi ni ng edg e. It wi l l r edu c e the shar p ness of an edg e.
. DESI GN GUI DELI NE: The c oi ni ng edg e si z e i s .020 x 20 r. The tol er anc e of the f eatu r e i s + / -.008. COI NI NG EDGE
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: the c ham f er l eng th (S ), ang l e (A). The c oi ni ng edg e f eatu r e shou l d be a c ham f er .
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
38
Sheet Metal Design Guidelines L anc e F o x c o nn . do c _ r ev . 0 1 TI TLE: LANCE ( #1 2 ) DESCRI P TI ON: A Lanc e f or m has two ty p es: op en l anc e and c l osed l anc e. An op en l anc e i s the c u tti ng and f or m i ng of the m ater i al that i s attac hed onl y on one end. A c l osed l anc e i s the c u tti ng and f or m i ng of the m ater i al that i s attac hed on both ends.
DESI GN GUI DELI NE: Al thou g h r el i ef i s not nec essar y , u si ng r el i ef i s a g ood desi g n p r ac ti c e f or the l anc e f eatu r e i f p ossi bl e. 1. Cl osed l anc e f or m : the m i ni m u m wi dth of a c l osed l anc e i s eq u al to two ti m es the m ater i al thi c k ness or .125, whi c hev er i s g r eater ; the m ax i m u m hei g ht i s eq u al to f i v e ti m es the m ater i al thi c k ness at a 45 ang l e (or f u l l r adi u s). 2. O p en l anc e f or m : the m i ni m u m wi dth of op en l anc e i s eq u al to two ti m es the m ater i al thi c k ness or .125, whi c hev er i s g r eater ; the m i ni m u m hei g ht i s eq u al to thr ee ti m es the m ater i al thi c k ness or .144, whi c hev er i s g r eater . CLOSED LANCE OP EN LANCE
Lanc e (shear i ng ) W (m i ni m u m ) = 2T, or .125, whi c hev er i s g r eater H (m i ni m u m ) = 3T, or .144, whi c hev er i s g r eater
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: l anc e hei g ht (H), l anc e wi dth (W), ang l e (A).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
39
Sheet Metal Design Guidelines L anc e F o x c o nn . do c _ r ev . 0 1 Du e to the p ossi bl e bu r r that wi l l be c r eated du r i ng shear i ng , esp ec i al l y f or thi c k er m ater i al , i t i s r ec om m ended to u se r el i ef as dep i c ted i n the p i c tu r es bel ow. P REFERRED LANCE FORM
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
40
Sheet Metal Design Guidelines L anc e F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON La n c e t o Edg e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) to the edg e i s: In a p ar al l el p l ane: The di stanc e (D1a) f r om the op en l anc e i s eq u al to f i v e ti m es the m ater i al thi c k ness. The di stanc e (D1b) f r om the c l osed l anc e i s eq u al to f ou r ti m es the m ater i al thi c k ness. In a p er p endi c u l ar p l ane: The di stanc e (D1c ) f r om the c l osed l anc e i s 2.5 ti m es the m ater i al thi c k ness/ La n c e t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) f r om the i nner su r f ac e of a bend to the l eadi ng edg e of the l anc e i s: In a p ar al l el p l ane: The m i ni m u m di stanc e (D2a) f or an op en l anc e i s eq u al to f ou r ti m es the m ater i al thi c k ness p l u s the r adi u s of the bend; The m i ni m u m di stanc e (D2c ) f or a c l osed l anc e i s eq u al to thr ee ti m es the m ater i al thi c k ness p l u s the r adi u s of the bend; In a p er p endi c u l ar p l ane: The m i ni m u m di stanc e (D2b) f or an op en l anc e i s eq u al to f ou r ti m es the m ater i al thi c k ness p l u s the r adi u s of the bend; The m i ni m u m di stanc e (D2d) f or c l osed l anc e i s eq u al to ei g ht ti m es the m ater i al thi c k ness p l u s the r adi u s of the bend. La n c e t o Ho l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D3) that a l anc e shou l d be f r om the edg e of a hol e i s thr ee ti m es the m ater i al thi c k ness. La n c e t o La n c e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D4) between two l anc es i s: In the di r ec ti on of two si de-by -si de l anc es: the di stanc e (D4a) i s eq u al to f i v e ti m es the m ater i al thi c k ness. In the di r ec ti on of two f ac e-to-f ac e l anc es: the di stanc e (D4b) i s eq u al to f ou r ti m es the m ater i al thi c k ness.
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
41
i ni m i ni m i ni m i ni m i ni m i ni m i ni m i ni m i ni m i ni m u i ni m u Rec
u m ) = 5T u m ) = 4T u m ) = 2.5T u m ) = 4T + R u m ) = 4T + R u m ) = 3T + R u m ) = 8T + R u m ) = 3T u m ) = 3T m ) = 5T m ) = 4T o m m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
42
Sheet Metal Design Guidelines L anc e F o x c o nn . do c _ r ev . 0 1 La n c e f o r m s w i t h a n ex t r u ded h o l e La n c e ( o p en ) w i t h Ex t r u ded h o l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) f r om the i nsi de su r f ac e of a bend to the ex tr u ded hol e (the m aj or di am eter of a ex tr u si on) i s eq u al to two ti m es the m ater i al thi c k ness, The m i ni m u m di stanc e (D2) f r om the edg e to the m aj or di am eter of an ex tr u ded hol e i s eq u al to 2.5 ti m es the m ater i al thi c k ness. LANCE( o p en ) w i t h Ex t r u ded h o l e
D1 (m i ni m u m ) = 2T, D2 (m i ni m u m ) = 2.5T Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: di stanc e f r om bend (D1), di stanc e f r om edg e (D2) and ex tr u si on i nsi de (or ou tsi de) di am eter . La n c e ( c l o s ed) w i t h Ex t r u ded h o l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D) f r om a bend to the ex tr u ded hol e (the m aj or di am eter of the ex tr u si on) i s eq u al to 2.5 ti m es the m ater i al thi c k ness. LANCE( c l o s ed) w i t h Ex t r u ded h o l e
D (m i ni m u m ) = 2.5T Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: di stanc e f r om bend (D).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
43
Sheet Metal Design Guidelines H o o k F o x c o nn . do c _ r ev . 0 1 TI TLE: HOOK ( #1 4) DESCRI P TI ON: A Hook i s an op ened l anc e f or m on the sheet m etal su r f ac e; a hook al way s ser v es f or a hook bef or e two c om p onents ar e f i x ed.
DESI GN GUI DELI NE: The m i ni m u m wi dth (W) of Hook i s eq u al to two ti m es the m ater i al thi c k ness or .125, whi c hev er i s g r eater . The r ec om m ended op en ang l e i s 30 ; the m i ni m u m l eng th (L) of an end f l ang e i s 2.5 ti m es the m ater i al thi c k ness. Addi ng r el i ef f or the hook f eatu r e i s r ec om m ended. HOOK
W (m i ni m u m ) = 2T L (m i ni m u m ) = 2.5T A (r ec om m ended) = 30 Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: O p en ang l e (A), end f l ang e l eng th (L), hook hei g ht (H), hook wi dth (W).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
44
Sheet Metal Design Guidelines H o o k F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON Ho o k t o Edg e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) to the edg e i s eq u al to f i v e ti m es the m ater i al thi c k ness. Ho o k t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) to the i nsi de su r f ac e of a bend i s eq u al to f i v e ti m es the m ater i al thi c k ness p l u s the r adi u s of a bend. Fea t u r e P o s i t i o n
D1 (m i ni m u m ) = 5T D2 (m i ni m u m ) = 5T + R Rec o m m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
45
Sheet Metal Design Guidelines R ib F o x c o nn . do c _ r ev . 0 1 TI TLE: RI B ( #1 5 ) DESCRI P TI ON: A Ri b i s a c y l i ndr i c al dep r essi on; i t i s u su al l y u sed f or the p u r p ose of str eng theni ng or sti f f eni ng a sheet m etal su r f ac e.
DESI GN GUI DELI NE: The m ax i m u m i nsi de r adi u s (R) of a r i b i s eq u al to thr ee ti m es the m ater i al thi c k ness; the m ax i m u m dep th i s eq u al to the i nsi de r adi u s, or eq u al to the i nsi de wi dth. The l eng th of a r i b i s not any c onstr ai nts. RI B
R (m ax i m u m ) = 3T, H (m ax i m u m ) = 3T Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: Ri b hei g ht (H), Ri b wi dth (W), Ri b i nsi de r adi u s (R).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
46
FEATURE P OSI TI ON Ri b t o Ho l e Des i g n Gu i del i n e: the m i ni m u m r ec om m ended di stanc e (D1) that the c enter l i ne of a r i b shou l d be f r om the edg e of a hol e i s two ti m es the m ater i al thi c k ness p l u s the r adi u s of the r i b. Ri b t o Edg e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) that a r i b shou l d be f r om the edg e i s: In a p er p endi c u l ar p l an (D2a): thr ee ti m es the m ater i al thi c k ness p l u s the i nsi de r adi u s of the r i b. In a p ar al l el p l ane (D2b): si x ti m es the m ater i al thi c k ness p l u s the i nsi de r adi u s of the r i b. Ri b t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D3) that a r i b shou l d be f r om a bend i s: Wi th bend p er p endi c u l ar to the r i b: two ti m es the m ater i al thi c k ness p l u s the i nsi de r adi u s of the r i b, p l u s the r adi u s of the bend. Wi th bend p ar al l el to the bend, thi s r i b g eom etr y i s u su al l y r edu ndant. Ri b t o Ri b Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D4) between two p ar al l el r i bs i s eq u al to ten ti m es the m ater i al thi c k ness p l u s the r adi u s of eac h r i b. Fea t u r e P o s i t i o n
m )= u m ) u m ) m )= m )= m en
2T + R1 = 3T + R1 = 6T + R1 2T + R1 + R2 10T + R1 ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
47
Sheet Metal Design Guidelines Sem i-shear F o x c o nn . do c _ r ev . 0 1 TI TLE: SEMI -SHEAR ( #1 6) DESCRI P TI ON: A S em i -shear i s a bl i nd hol e that i s p u nc hed on the sheet m etal su r f ac e.
DESI GN GUI DELI NE: The m ax i m u m dep th of the sem i -shear i s eq u al to one-hal f the m ater i al thi c k ness. If the m ater i al thi c k ness i s l ess than .031i n (0.8m m ), i t i s str ong l y r ec om m ended not to u se sem i -shear f eatu r e. Sem i -s h ea r
H (m ax i m u m ) = T/ 2 Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: sem i shear hei g ht (H), di am eter (D).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
48
Sheet Metal Design Guidelines Sem i-shear F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON Sem i -s h ea r t o Fo r m Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) f r om the edg e of a sem i shear to a f or m i s thr ee ti m es the m ater i al thi c k ness p l u s the f or m r adi u s. Sem i -s h ea r t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) f r om the edg e of a sem i shear to a bend i s two ti m es the m ater i al thi c k ness p l u s the bend r adi u s. Sem i -s h ea r t o Sem i -s h ea r Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D3) between the sem i -shear s i s eq u al to thr ee ti m es the m ater i al thi c k ness. Sem i -s h ea r t o Edg e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D4) between edg es of two sem i -shear s i s eq u al to thr ee ti m es the m ater i al thi c k ness. Sem i -s h ea r ( l o n g er ) t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D5) f r om the edg e of a l ong sem i -shear to a bend i s di r ec tl y p r op or ti onal to the l eng th of the sem i -shear , m ater i al thi c k ness and the r adi u s of the bend. Fea t u r e P o s i t i o n
L: l eng th of S em i -shear D1 (m D2 (m D3 (m D4 (m i ni m i ni m i ni m i ni m u m u u u ) = 3T + R2 m ) = 2T + R1 m ) = 3T m ) = 3T
When L i s l ess than 1.0 then D5 (m i ni m u m ) = 2.5T + R When L i s 1.0 to 2.0 then D5 (m i ni m u m ) = 3T + R When L i s ov er 2.0 then D5 (m i ni m u m ) = 3.5T + R Rec o m m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
49
Sheet Metal Design Guidelines R aised L etter s ic o n F o x c o nn . do c _ r ev . 0 1 TI TLE: RAI SED LETTERS I CON ( #1 7) DESCRI P TI ON: A Rai sed l etter i c on i s f or m ed on the sheet m etal su r f ac e.
DESI GN GUI DELI NE: The r ec om m ended hei g ht of a r ai sed l etter i c on f eatu r e i s eq u al to .020. RAI SED LETTERS I CON
GUI DELI NES FOR 3D GEOMETRY: 3D m odel c an be c r eated by sem i -shear f eatu r e. The hei g ht of l etter s c an be set by .020.
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
50
TI TLE: DI MP LE ( #1 8 ) DESCRI P TI ON: The Di m p l e i s a sp her i c al dep r essi on i n the sheet m etal .
DESI GN GUI DELI NE: The ou tsi de di am eter of the Di m p l e shou l d be eq u al to, or l ess than, si x ti m es the m ater i al thi c k ness, to a dep th eq u al to, or l ess than, f ou r ti m es the m ater i al thi c k ness. DI MP LE
D (m ax i m u m ) = 6T, H (m ax i m u m ) = 4T Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: Di m p l e hei g ht (H), di m p l e ou tsi de di am eter (D).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
51
Sheet Metal Design Guidelines Dim p le F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON Di m p l e t o Di m p l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) between two di m p l es shou l d be thr ee ti m es the m ater i al thi c k ness p l u s the i nsi de r adi u s of both di m p l es. Di m p l e t o Ho l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2 m easu r ed f r om the c enter of the di m p l e) that a di m p l e shou l d be f r om a hol e i s thr ee ti m es the m ater i al thi c k ness p l u s the r adi u s of the di m p l e. Di m p l e t o Edg e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D3 m easu r ed f r om the c enter of the di m p l e) that a di m p l e shou l d be f r om an edg e i s thr ee ti m es the m ater i al thi c k ness p l u s the i nsi de r adi u s of the di m p l e. Di m p l e t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D4 m easu r ed f r om the c enter of the di m p l e) that a di m p l e shou l d be f r om a bend i s two ti m es the m ater i al thi c k ness p l u s the i nsi de r adi u s of the di m p l e p l u s the r adi u s of the bend. Fea t u r e P o s i t i o n
D1 (m D2 (m D3 (m D4 (m
i ni m i ni m i ni m i ni m
u m u m u m u m Rec
)= )= )= )= o m
3 T + R2 + R3 3 T + R2 3 T + R2 2 T + R1 + R2 m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
52
Sheet Metal Design Guidelines Stam p ing I c o ns F o x c o nn . do c _ r ev . 0 1 TI TLE: STAMP I NG I CONS ( #1 9 ) DESCRI P TI ON: A S tam p i ng i c ons i s u sed f or showi ng the p ar t nu m ber , l abel p osi ti on, di r ec ti on i c on or som e other i nf or m ati on on the sheet m etal su r f ac e.
DESI GN GUI DELI NE: The r ec om m ended dep th of a stam p i ng f eatu r e i s eq u al to .008, the r ec om m ended wi dth of a stam p i ng i c on i s eq u al .008; f or the tex t i c on (p ar t nu m ber ), the hei g ht of tex t i s eq u al to .118; the wi dth-hei g ht r ati o of tex t i s 0.8. STAMP I NG I CON
D (r ec om m ended) = .008 (REF) Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d be c l ear l y i ndi c ated the tex t hei g ht and ap p r ox i m ate l oc ati on.
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
53
Sheet Metal Design Guidelines Stam p ing I c o ns F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON St a m p i n g I c o n t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D) f r om the i nsi de su r f ac e of a bend to the S tam p i ng Ic on i s eq u al to f ou r ti m es the m ater i al thi c k ness p l u s the r adi u s of a bend. Fea t u r e P o s i t i o n
D (m i ni m u m ) = 4T + R Rec o m m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
54
Sheet Metal Design Guidelines C ar d-guide-f o r m TI TLE: CARD GUI DE FORM ( #2 2 ) DESCRI P TI ON: A Car d g u i de f or m p u r p ose of g u i di ng a sl i di ng c ar d. i s a f or m
F o x c o nn . do c _ r ev . 0 1
l eng th of a c ar d g u i de f or m
i s eq u al to 5.00 (4.00 f or
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: Car d g u i de f or m op en ang l e (A), g u i de f or m l eng th (L), g u i de f or m bottom wi dth (W).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
55
F o x c o nn . do c _ r ev . 0 1
FEATURE P OSI TI ON Ca r d g u i de f o r m t o Co u n t er s i n k Ho l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) f r om the m aj or di am eter of the c ou nter si nk hol e to the c ar d g u i de f or m i s f ou r ti m es the m ater i al thi c k ness. Ca r d g u i de f o r m t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) f r om the f or m c enter l i ne i s f i v e ti m es the m ater i al thi c k ness p l u s the i nsi de r adi u s of the bend, (The di stanc e c an be r edu c ed i f addi ng r el i ef (sl ot) on the bend.) Fea t u r e P o s i t i o n
D1 (m i ni m u m ) = 4T D2 (m i ni m u m ) = 5T + R Rec o m m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
56
Sheet Metal Design Guidelines R o und hem TI TLE: ROUND HEM ( #2 3) DESCRI P TI ON: A r ou nd hem i s a c l osed hem hol e on the sheet m etal su r f ac e.
F o x c o nn . do c _ r ev . 0 1
DESI GN GUI DELI NE: The m i ni m u m r ec om m ended l eng th of the r etu r n f l ang e i s eq u al to thr ee ti m es the m ater i al thi c k ness. The m i ni m u m r ec om m ended wi dth of the hem g eom etr y i s eq u al to two ti m es l eng th of f l ang e p l u s thr ee ti m es the m ater i al thi c k ness. The g eom etr y of thi s f eatu r e shou l d be obr ou nd. ROUND HEM
H (m i ni m W (m i ni m u m R = f u l l r ou Rec o m
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: Hem r etu r n f l ang e l eng th (H), g eom etr y wi dth (W), g eom etr y r adi u s (R).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
57
F o x c o nn . do c _ r ev . 0 1
Ro u n d h em t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) f r om a bend i s thr ee ti m es the m ater i al thi c k ness. Ro u n d h em t o Edg e Des i g n Gu i del i n e: The m i ni m u m ti m es the m ater i al thi c k ness. r ec om m ended di stanc e (D2) f r om
the i nsi de su r f ac e of
an edg e i s ei g ht
Ro u n d h em t o Sl o t Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D3) f r om a r ec tang u l ar hol e edg e i s di r ec tl y r el ated to the l eng th of the sl ot and the m ater i al thi c k ness.. Ro u n d h em t o Fo r m Des i g n Gu i del i n e: The m i ni m u m ti m es the m ater i al thi c k ness. r ec om m ended di stanc e (D4) f r om the f or m i s ei g ht
Fea t u r e P o s i t i o n
D1 (m i ni m u m ) = 3T D2 (m i ni m u m ) = 8T When L i s l ess than 2.0 then D3 (m i ni m u m ) = 8T When L i s ov er 2.0 then D3 (m i ni m u m ) = 12T D4 (m i ni m u m ) = 8T Rec o m m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
58
Sheet Metal Design Guidelines E x tr uded H o le F o x c o nn . do c _ r ev . 0 1 TI TLE: EX TRUDED HOLE ( #2 4) DESCRI P TI ON: Ex tr u di ng an ex i sti ng hol e or p i er c i ng and ex tr u di ng a hol e i n sheet m etal i s c al l ed an Ex tr u ded hol e.
DESI GN GUI DELI NE: The hol e di am eter of the ex tr u ded hol e i s based u p on sp ec i f i c desi g n r eq u i r em ents. The m ax i m u m hei g ht of ex tr u ded hol e i s l ess than hal f of the hol e di am eter (as an ex am p l e, the m ax i m u m hei g ht f or M3 ex tr u ded hol e i s .059) EX TRUDED HOLE
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: ex tr u si on hei g ht (H), i nsi de di am eter (d), tap p i ng sp ec (M).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
59
Sheet Metal Design Guidelines E x tr uded H o le F o x c o nn . do c _ r ev . 0 1 FEATURE P OSI TI ON Ex t r u ded h o l e t o Ex t r u ded h o l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) between two ex tr u ded hol es (f r om the m aj or di am eter of eac h ex tr u si on) i s f ou r ti m es the m ater i al thi c k ness. Ex t r u ded h o l e t o Edg e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) that the m aj or di am eter of an ex tr u ded hol e shou l d be f r om an edg e i s thr ee ti m es the m ater i al thi c k ness. Ex t r u ded h o l e t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D3) that the m aj or di am eter of an ex tr u ded hol e shou l d be f r om a bend i s thr ee ti m es the m ater i al thi c k ness p l u s the bend r adi u s. Ex t r u ded h o l e t o Ho l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D4) that the m aj or di am eter of an ex tr u ded hol e shou l d be f r om a hol e i s thr ee ti m es the m ater i al thi c k ness. Fea t u r e P o s i t i o n
D1 (m D2 (m D3 (m D4 (m
i ni m i ni m i ni m i ni m
u m u m u m u m Rec
)= )= )= )= o m
4T 3T 3T+ R 3T m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
60
Sheet Metal Design Guidelines T hr ead f o r m TI TLE: THREAD FORM ( #2 5 ) DESCRI P TI ON: A Thr ead f or m the sel f -tap p i ng sc r ew.
F o x c o nn . do c _ r ev . 0 1
DESI GN GUI DELI NE: Mak e a note f or the f eatu r e to show i ts sp ec . THREAD FORM .
Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d be c l ear l y i ndi c ated the f eatu r e by a thr ead f or m ; the g eom etr y c an be c r eated by a f or m to show the thr ead di r ec ti on.
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
61
F o x c o nn . do c _ r ev . 0 1
Th r ea d f o r m t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) f r om the i nsi de su r f ac e of a bend to the m aj or di am eter of thr ead f or m i s eq u al to thr ee ti m es the m ater i al thi c k ness p l u s the bend r adi u s: Th r ea d f o r m t o Th r ea d f o r m Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) between two thr ead f or m s i s eq u al to f i v e ti m es the m ater i al thi c k ness. Th r ea d f o r m t o Edg e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D3) f r om thr ee ti m es the m ater i al thi c k ness. Th r ea d f o r m t o Ho l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D4) f r om two ti m es the m ater i al thi c k ness. Th r ea d f o r m t o Co u n t er s i n k Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D5) f r om of a c ou nter si nk i s eq u al to thr ee ti m es the m ater i al thi c k ness. Fea t u r e P o s i t i o n an edg e i s eq u al to
a hol e i s eq u al to
the m aj or di am eter
D1 (m D2 (m D3 (m D4 (m D5 (m Rec
i ni m i ni m i ni m i ni m i ni m o m
u m u m u m u m u m m en
) = 3T + R ) = 5T ) = 3T ) = 2T ) = 3T ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
62
Sheet Metal Design Guidelines Gusset F o x c o nn . do c _ r ev . 0 1 TI TLE: GUSSET ( #2 6) DESCRI P TI ON: A Gu sset i s a dep r essi on on the bend l i ne to ser v e f or sti f f eni ng a bend;
DESI GN GUI DELI NE: The g u sset i s r el ated to the m ater i al , the m ater i al thi c k ness and g u sset r adi u s. The g u sset c an be set by a standar d g eom etr y to ser v e f or the sti f f eni ng f u nc ti on. GUSSET
A1 (r ec om m ended) = 90 r W (m i ni m u m ) = 2T D (m ax i m u m ) = 2T
GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: Gu sset dep th (D), Gu sset wi dth (W), Gu sset head ang l e (A1), Gu sset f or m ed ang l e (A2), Gu sset f or m l eng th (L).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
63
Ti p s f o r t h e Gu s s et f ea t u r e. Des i g n Gu i del i n e: The Gu sset wi l l r esu l t i n di stor ti on of a hol e i f the hol e and the g u sset ar e i n-l i ne. Rec om m end to of f set g u sset and hol e.
GUSSET
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
64
FEATURE P OSI TI ON Gu s s et t o Ho l e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) that a g u sset shou l d be f r om the edg e of a hol e i s: To a hol e (D1a): thr ee ti m es the m ater i al thi c k ness p l u s the r adi u s of the g u sset. To a sl ot (D1b): f ou r ti m es the m ater i al thi c k ness p l u s the r adi u s of the g u sset. Gu s s et t o Edg e Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) that a g u sset shou l d be f r om an edg e i s: In a p ar al l el p l ane (D2a): ten ti m es the m ater i al thi c k ness p l u s the i nsi de r adi u s of the g u sset. In a p er p endi c u l ar p l ane (D2b): f ou r ti m es the m ater i al thi c k ness p l u s the i nsi de r adi u s of the g u sset. Gu s s et t o Gu s s et Des i g n Gu i del i n e: the m i ni m u m r ec om m ended di stanc e (D3) between two g u ssets i s eq u al to ten ti m es the m ater i al thi c k ness p l u s the r adi u s of eac h g u sset. Fea t u r e P o s i t i o n
i ni m u m ) = 3T + W2/ 2 i ni m u m ) = 4T + W1/ 2 i ni m u m ) = 10T + W1/ 2 i ni m u m ) = 4T + W1/ 2 u m ) = 10T + W1/ 2 + W2/ 2 Rec o m m en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
65
Sheet Metal Design Guidelines Sp o o n F o x c o nn . do c _ r ev . 0 1 TI TLE: SP OON ( #2 7) DESCRI P TI ON: A sp oon i s a sp ec i al ty p e of op en l anc e f or m ed wi th a di m p l e on the u nattac hed si de. A sp oon has a nar r ow nec k p ar t to ser v e the sp r i ng f u nc ti on when the di m p l e i s p r essed.
DESI GN GUI DELI NE: The m i ni m u m wi dth of the di m p l e f l ang e f r om ti m es the m ater i al thi c k ness, or .032, whi c hev er i s g r eater . SP OON
S (m i ni m u m ) = 0.8T Rec o m m en ded GUI DELI NES FOR 3D GEOMETRY: 3D shou l d c l ear l y i ndi c ate f ol l owi ng i nf or m ati on: S p oon l eng th (L), S p oon nar r owest wi dth (W), S p oon hei g ht (H), S p oon f l ang e wi dth (S ).
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
66
FEATURE P OSI TI ON Sp o o n t o Ben d Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D1) f r om a bend i s: In a p ar al l el di r ec ti on, the m i ni m u m di stanc e (D1a) i s eq u al to f ou r ti m es the m ater i al thi c k ness p l u s the r adi u s of the bend; In a p er p endi c u l ar di r ec ti on, the m i ni m u m di stanc e (D1b) i s eq u al to thr ee ti m es the m ater i al thi c k ness p l u s the r adi u s of the bend. Sp o o n t o Sp o o n Des i g n Gu i del i n e: The m i ni m u m r ec om m ended di stanc e (D2) between the sp oons i s thr ee ti m es the m ater i al thi c k ness. Fea t u r e P o s i t i o n
u m u m m m
) = 4T + R ) = 3T + R ) = 3T en ded
0 5/ 30 / 20 0 7
F O X C O N N C o nf idential
67