You are on page 1of 3

Homework #11

PHYS 229.3 Introductory Electromagnetism and AC Circuits


Problems: Due: Not submitted
1. For the network shown:

(a) Find the total impedance Z T and the total admittance Y T .


(b) Find the current I s
(c) Calculate I 2 using the current divider rule.
(d) Calculate V C
(e) Calculate the average power delivered to the network.

Is I2
R2 = 9.1 Ω

V = 60 V 306 R1 = 4.7 Ω
XC = 12 Ω

2. For the network shown:

(a) Find the current I 1 .


(b) Find the voltage V 1 .
(c) Calculate the average power delivered to the network.
3. For the network shown:
(a) Find the total impedance Z T and the total admittance Y T .
(b) Find the currents I 1 , I 2 , and I 3 .
(c) Verify Kirchhoff’s current law by showing that I s = I 1 + I 2 + I 3 .
(d) Find the power factor of the network and indicate whether it is
leading or lagging.

4. For the network shown:


(a) Find the total admittance Y T .
(b) Find the voltages V 1 and V 2 .
(c) Find the current I 3 .
5. Find the current I 1 for the circuit shown.

6. For the series circuit shown:

(a) Find the value of XC for resonance.


(b) Determine the total impedance of the circuit at resonance.
(c) Find the magnitude of the current I.
(d) Calculate the voltages VR , VL , and VC at resonance. How are
VL and VC related? How does VR compare to the applied
voltage V ?
(e) What is the quality factor of the circuit? Is it a high- or low-Q
circuit?
(f) What is the power dissipated by the circuit at resonance?

I
R = 10 Ω XL = 30 Ω

V = 50 mV XC

You might also like