Professional Documents
Culture Documents
Professor: G. GOMEZ
EXERCICIS
Alumne: NOTA:
Data:
1. The circuits of Figure have the total resistance, RT, as shown. For each of the
circuits find the following:
a. The magnitude of current in the circuit.
b. The total power delivered by the voltage source.
c. The direction of current through each resistor in the circuit.
d. The value of the unknown resistance, R.
e. The voltage drop across each resistor.
f. The power dissipated by each resistor. Verify that the summation of powers
dissipated by the resistors is equal to the power delivered by the voltage source.
4. Use Kirchhoff’s current law to determine the magnitudes and directions of the
indicated currents in each of the networks shown in Figure
5. For the circuit of Figure, determine the magnitude and direction of each of the
indicated currents.
c)
11. Calculate the resistances Rab and Rbc in the circuit of Figure
20. Given the circuit of Figure, calculate the output voltage Vout when RL = 0 Ω, 250 Ω,
and 500 Ω.
21. Convert the voltage sources of Figure into current sources and solve for the current
I1 and the voltage Vab.
22. Write the branch-current equations for the circuit shown in Figure and solve for the
branch currents using determinants.
23. Write the mesh equations for the network in Figure. Solve for the loop currents
using determinants.
24. Write the mesh equations for the network in Figure. Solve for the loop currents
using determinants.
25. Using Δ-Y or Y-Δ conversion, find the current I for the circuit of Figure
26. Using Δ-Y or Y-Δ conversion, find the current I for the circuit of Figure
27. Using Δ-Y or Y-Δ conversion, find the current I for the circuit of Figure
28. Using Δ-Y or Y-Δ conversion, find the current I for the circuit of Figure
42. A capacitor has an accumulated charge of 600 µC with 5 V across it. What
is the value of capacitance?
Idem.
48. Find the value of C if the energy stored in the capacitor in Fig. equals the
energy stored in the inductor.
49. Calcula la capacidad total en los siguientes circuitos:
a)
b)
c) Si todos son de 4 µF
d) Con las dos posiciones del interruptor.
e)
50. Calcular el valor de C para que la capacidad total del circuito sea 10 µF.
51. Find i(t) for t >0 in the network in Fig.
53. Find vo(t) for t >0 in the circuit in Fig. and plot the response including the
time interval just prior to switch action.
54. Find io (t) for t > 0 in the circuit in Fig. and plot the response including the
time interval just prior to closing the switch.
55. Find vo(t) for t > 0 in the circuit in Fig. and plot the response including the
time interval just prior to opening the switch.
56. Un diodo está en serie con una resistencia de 220 ohmios. Si la tensión en
la resistencia es de 4 v, ¿cuál es la corriente por el diodo?
58. Si la resistencia del circuito de la figura se duplica de valor ¿qué ocurre con
la intensidad del diodo?
62. Dibuja la señal de salida para cada uno de los dos circuitos de la
figura.
63. Calcular el cuadro de valores para el circuito de la figura sabiendo que
beta=100 y el transistor es de silicio.
VCC = 30 V.
RB = 2 KΩ.
RC = 500 Ω.
= 50.
VBE = 0,6 V.
VCEsat = 0,2 V.
65. Calcular el valor de R2 y β para que el transistor funcione en activa con IC =1 mA.
VCC = 10 V.
VBB = 2 V.
RC = 3 KΩ.
RE = 1KΩ.
R1 = 20 KΩ.
VBE = 0,6 V.
VCEsat = 0,2 V.
66. Calcular la ganancia de tensión del circuito de la figura suponiendo el ao
ideal.
Salida = 3a+2b+c