You are on page 1of 2

Quick Start Guide

ROGER UHF RFID Reader System

1. Install the AS399x Reader Suite which is stored on the CD. 2. Connect the provided auxiliary power supply with the ROGER UHF RFID Reader System 3. Connect the UHF RFID ROGER Reader System to a USB port* on the host system using the provided USB cable. 4. Start the AS399x Reader Suite and press Start Scan in the main window to search for tags. 5. Tags within the read range of the Reader System are displayed on the screen. 6. For further Information about using the AS399x Reader Suite, please review the AS399x Reader Suite Manual.

Picture 1: AS399x Reader Suite Main Window

Revision No. 1., Date: 11 June 2010

Quick Start / ROGER Demo System


ROGER - UHF RFID Reader System Package Contents:

ROGER UHF RFID Reader System

USB- Cable for host computer connection

3 4 5

SMA / MMCX antenna cable

3 x RFID Tags (various) LED Power Indicator Antenna USB Flash Drive containing AS399x Reader Suite and documentation

AC Adapter

This Quick Start Guide

Note: The provided antenna has a broad bandwidth and is indented to cover the whole UHF RFID frequency span. To achieve more read range an antenna with a higher gain and a more specialized frequency range might be appropriate. The reader system is ready to be outfitted with different antennas to provide maximum flexibility.

Copyright 2010 austriamicrosystems. Trademarks registered . All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. To the best of its knowledge, austriamicrosystems asserts that the information contained in this publication is accurate and correct.

Revision No. 1., Date: 11 June 2010

You might also like