You are on page 1of 9

^ % Invalid input detected at '^' marker.

Switch(config)#era 00:11:23: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEt hernet0/1 (10), with Switch FastEthernet0/11 (20). Switch(config)#era Switch(config)#erase v Switch(config)#exit Switch#sho 00:11:56: %SYS-5-CONFIG_I: Configured from console by consolew run Building configuration... Current configuration : 1407 bytes ! version 12.2 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Switch ! enable secret 5 $1$MlSj$sFi1YncqDu.u0mlsJ2u7r0 ! username cetis password 0 utp no aaa new-model ip subnet-zero ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! interface FastEthernet0/1 switchport access vlan 10 switchport mode access ! interface FastEthernet0/2 ! interface FastEthernet0/3 ! interface FastEthernet0/4 ! interface FastEthernet0/5 ! interface FastEthernet0/6 ! interface FastEthernet0/7 ! interface FastEthernet0/8 ! interface FastEthernet0/9 ! interface FastEthernet0/10 !

interface FastEthernet0/11 ! interface FastEthernet0/12 ! interface FastEthernet0/13 ! interface FastEthernet0/14 ! interface FastEthernet0/15 ! interface FastEthernet0/16 ! interface FastEthernet0/17 ! interface FastEthernet0/18 ! interface FastEthernet0/19 ! interface FastEthernet0/20 ! interface FastEthernet0/21 ! interface FastEthernet0/22 ! interface FastEthernet0/23 ! interface FastEthernet0/24 ! interface GigabitEthernet0/1 ! interface GigabitEthernet0/2 ! interface Vlan1 ip address 199.33.2.1 255.255.255.0 ! interface Vlan10 no ip address ! ip classless ip http server ! ! control-plane ! ! line con 0 speed 115200 line vty 0 4 login local line vty 5 15 login local ! end Switch#config term Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#int 00:12:23: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEt hernet0/1 (10), with Switch FastEthernet0/11 (20). vlan 1 Switch(config-if)#no ip add

Switch(config-if)#exit Switch(config)#int vlan 10 Switch(config-if)#ip add 199.33.2.1 255.255.255.0 Switch(config-if)#no shut Switch(config-if)#exit Switch(config)#exit Switch#snow r 00:12:54: %SYS-5-CONFIG_I: Configured from console by consoleun Building configuration... Current configuration : 1407 bytes ! version 12.2 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Switch ! enable secret 5 $1$MlSj$sFi1YncqDu.u0mlsJ2u7r0 ! username cetis password 0 utp no aaa new-model ip subnet-zero ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! interface FastEthernet0/1 switchport access vlan 10 switchport mode access ! interface FastEthernet0/2 ! interface FastEthernet0/3 ! interface FastEthernet0/4 ! interface FastEthernet0/5 ! interface FastEthernet0/6 ! interface FastEthernet0/7 ! interface FastEthernet0/8 ! interface FastEthernet0/9 ! interface FastEthernet0/10 ! interface FastEthernet0/11 ! interface FastEthernet0/12

! interface FastEthernet0/13 ! interface FastEthernet0/14 ! interface FastEthernet0/15 ! interface FastEthernet0/16 ! interface FastEthernet0/17 ! interface FastEthernet0/18 ! interface FastEthernet0/19 ! interface FastEthernet0/20 ! interface FastEthernet0/21 ! interface FastEthernet0/22 ! interface FastEthernet0/23 ! interface FastEthernet0/24 ! interface GigabitEthernet0/1 ! interface GigabitEthernet0/2 ! interface Vlan1 no ip address ! interface Vlan10 ip address 199.33.2.1 255.255.255.0 ! ip classless ip http server ! ! control-plane ! --More-00:13:23: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEt hernet0/1 (10), with Switch FastEthernet0/11 (20). 00:14:23: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEt hernet0/1 (10), with Switch FastEthernet0/11 (20). 00:15:23: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEt hernet0/1 (10), with Switch FastEthernet0/11 (20). 00:16:23: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEt hernet0/1 (10), with Switch FastEthernet0/11 (20). 00:17:23: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEt hernet0/1 (10), with Switch FastEthernet0/11 (20). 00:18:23: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEt hernet0/1 (10), with Switch FastEthernet0/11 (1). 00:19:23: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEt hernet0/1 (10), with Switch FastEthernet0/11 (1). 00:20:23: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEt hernet0/1 (10), with Switch FastEthernet0/11 (1). 00:20:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, chang ed state to down

00:20:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan10, changed state to down 00:21:00: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed sta! n line con 0 speed 115200 line vty 0 4 login local Switch# Switch# Switch# Switch# Switch#show vlan brief VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5 Fa0/6, Fa0/7, Fa0/8, Fa0/9 Fa0/10, Fa0/11, Fa0/12, Fa0/13 Fa0/14, Fa0/15, Fa0/16, Fa0/17 Fa0/18, Fa0/19, Fa0/20, Fa0/21 Fa0/22, Fa0/23, Fa0/24, Gi0/1 Gi0/2 10 john_juan active Fa0/1 13 ccna3_1 active 23 ccna3_2 active 33 ccna3_3 active 50 ADMIN active 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup Switch#config term Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#int vlan 10 Switch(config-if)#no shut Switch(config-if)#end Switch#show vlan brief 00:22:14: %SYS-5-CONFIG_I: Configured from console by console VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5 Fa0/6, Fa0/7, Fa0/8, Fa0/9 Fa0/10, Fa0/11, Fa0/12, Fa0/13 Fa0/14, Fa0/15, Fa0/16, Fa0/17 Fa0/18, Fa0/19, Fa0/20, Fa0/21 Fa0/22, Fa0/23, Fa0/24, Gi0/1 Gi0/2 10 john_juan active Fa0/1 13 ccna3_1 active 23 ccna3_2 active 33 ccna3_3 active 50 ADMIN active 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup Switch#

Switch con0 is now available

Press RETURN to get started.

Switch>enable Password: Switch#telnet 199.33.2.1 Trying 199.33.2.1 ... % Destination unreachable; gateway or host down Switch#telnet 199.33.1.1 Trying 199.33.1.1 ... % Destination unreachable; gateway or host down Switch#show run Building configuration... Current configuration : 1407 bytes ! version 12.2 no service pad

service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname Switch ! enable secret 5 $1$MlSj$sFi1YncqDu.u0mlsJ2u7r0 ! username cetis password 0 utp no aaa new-model ip subnet-zero ! ! ! ! no file verify auto spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! interface FastEthernet0/1 switchport access vlan 10 switchport mode access ! interface FastEthernet0/2 ! interface FastEthernet0/3 ! interface FastEthernet0/4 ! interface FastEthernet0/5 ! interface FastEthernet0/6 ! interface FastEthernet0/7 ! interface FastEthernet0/8 ! interface FastEthernet0/9 ! interface FastEthernet0/10 ! interface FastEthernet0/11 ! interface FastEthernet0/12 ! interface FastEthernet0/13 ! interface FastEthernet0/14 ! interface FastEthernet0/15 ! interface FastEthernet0/16 ! interface FastEthernet0/17 ! interface FastEthernet0/18 ! interface FastEthernet0/19

! interface FastEthernet0/20 ! interface FastEthernet0/21 ! interface FastEthernet0/22 ! interface FastEthernet0/23 ! interface FastEthernet0/24 ! interface GigabitEthernet0/1 ! interface GigabitEthernet0/2 ! interface Vlan1 no ip address ! interface Vlan10 ip address 199.33.2.1 255.255.255.0 ! ip classless ip http server ! ! control-plane ! ! line con 0 speed 115200 line vty 0 4 login local line vty 5 15 login local ! end Switch#sh line Tty Typ Tx/Rx * 0 CTY 1 VTY 2 VTY 3 VTY 4 VTY 5 VTY 6 VTY 7 VTY 8 VTY 9 VTY 10 VTY 11 VTY 12 VTY 13 VTY 14 VTY 15 VTY 16 VTY Switch# Switch# A Modem Roty AccO AccI Uses 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Noise Overruns 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 0 0/0 Int -

Switch con0 is now available

Press RETURN to get started.

You might also like