Professional Documents
Culture Documents
SynchroTeq Plus
SynchroTeq Plus
S Y S T E M S
F O R
T H E
S M A R T
G R I D
BENEFITS
Compatible with recognized SynchroTeq Point on Wave Switching Controller Residual Flux calculation for Unloaded Transformer Energization Circuit Breaker Independant Design (can be applied with any C/B) Advanced Logic Configuration with IEC 61131-3 Compliant Soft PLC Modular I/O Boards for flexible configuration
SynchroTeq Plus
Circuit Breaker Point on Wave Switching now supports Transformer Energization
Without SynchroTeq Plus
Point on wave switching is used extensively in shunt capacitor bank and shunt inductor applications to minimize inrush and overvoltages. For unloaded transformer energization, point on wave switching requires that the controller also has knowledge of the residual flux in the transformers core.
Applications
LOAD OPERATION
SynchroTeq Plus
Close at peak voltage Close at voltage zero Optimize arcing time Close according to residual flux
STRESS AVOIDED
Asymetrical Inrush Inrush and overvoltage Overvoltage and restrike Inrush and overvoltages
Advanced Communications
SynchroTeq Plus adds communication protocol support to a SCADA or substation DCS system.
Configuration Flexibility
By integrating a soft PLC engine, SynchroTeq Plus lets the user define the behavior of the modular input/outputs. The soft PLC is IEC 61131-3 compliant, supporting all 5 programming languages (Ladder, FBD, SFC, ST and IL)
DNP 3
Modbus
2284 de la Province Street Longueuil (Qc) Canada J4G 1G1 Phone: (450) 679-0003 Fax: (450) 679-9051 sales@vizimax.com