Professional Documents
Culture Documents
April 2003
This book provides more detailed information on the features and use of the Compaq Business Desktop personal computer, and includes instructions for removing and replacing internal components.
2002 Hewlett-Packard Company 2002 Hewlett-Packard Development Company, L.P. HP, Hewlett Packard, and the Hewlett-Packard logo are trademarks of Hewlett-Packard Company in the U.S. and other countries. Compaq and the Compaq logo are trademarks of Hewlett-Packard Development Company, L.P. in the U.S. and other countries. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and other countries. Intel and Pentium are trademarks of Intel Corporation in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The information in this document is provided as is without warranty of any kind, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company.
WARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
Hardware Reference Guide Compaq Business Desktop D530 Ultra-Slim Desktop Model First Edition (April 2003) Document Part Number: 321640-001
Contents
1 Product Features
Standard Configuration Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Easy Access Keyboard Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Customizing the Easy Access Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Windows Logo Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Special Mouse Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serial Number Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Choose Minitower or Desktop Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 12 13 14 15 15 16 16 17
2 Hardware Upgrades
Removing and Replacing the Top Access Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Adding System Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 DIMMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 DDR DIMMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 DIMM Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Adding or Removing a Memory Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Adding a PCI Expansion Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Installing an Expansion Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Upgrading the Hard Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 Working with the MultiBay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 Hot-Plugging or Hot-Swapping MultiBay Drives . . . . . . . . . . . . . . . . . . . . . 216 Partitioning and Formatting a MultiBay Hard Drive . . . . . . . . . . . . . . . . . . . . . . 217 Inserting a Drive into the MultiBay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 Engaging and Releasing the MultiBay Security Catch. . . . . . . . . . . . . . . . . . . . . 219 Removing a Drive from the MultiBay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
www.hp.com
iii
Contents
C Electrostatic Discharge
Preventing Electrostatic Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C1 Grounding Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C1
Index
iv
www.hp.com
1
Product Features
Standard Configuration Features
The Compaq Business Desktop computer comes with features that may vary depending on the model. For a complete listing of the hardware and software installed in the computer, run HP Diagnostics for Windows. Instructions for using these utilities are provided in the Troubleshooting Guide on the Documentation Library CD.
www.hp.com
11
Product Features
1 2 3 4 5 6 7 8
MultiBay Dual-State Power Button Power On Light Universal Serial Bus (USB) Connectors (2) Headphone Connector Microphone Connector Hard Drive Activity Light MultiBay Eject Lever
12
www.hp.com
Product Features
1 2 3 4 5
PCI Bay Ethernet RJ-45 Connector Universal Serial Bus (USB) Connectors (4) Power Cord Connector Monitor Connector
6 7 8 9
Line-Out Audio Connector Line-In Audio Connector Slot for Kensington lock Loop for padlock
Any USB device (including keyboard and mouse) can be connected to any USB connector.
interface (DVI) option card has been installed on If the digital videomonitor connector will be different than pictured. this computer, the
A DVI is required for a digital flat panel monitor. If a DVI option card has not been installed, then any digital flat panel monitor connected to the computer must feature an analog-to-digital converter.
www.hp.com
13
Product Features
1 Function Keys 2 Easy Access Buttons 3 Editing Keys 4 Status Lights 5 Numeric Keys 6 Arrow Keys
Perform special functions, depending on the software application being used. Provide quick access to favorite Web sites, services, and applications. Include the following: Insert, Home, Page Up, Delete, End, and Page Down. Indicate the status of the computer and keyboard settings (Num Lock, Caps Lock, and Scroll Lock). Work like a calculator keypad. Used to navigate through a document or Web site. These keys allow you to move left, right, up, and down, using the keyboard instead of the mouse. Used in combination with other keys; its effect depends on the application software you are using. Used (like the right mouse button) to open pop-up menus in a Microsoft Office application. May perform other functions in other software applications. Used to open the Start menu in Microsoft Windows. Used in combination with other keys to perform other functions. Used in combination with other keys; its effect depends on the application software you are using.
14
www.hp.com
Product Features
www.hp.com
15
Product Features
16
www.hp.com
Product Features
www.hp.com
17
2
Hardware Upgrades
Removing and Replacing the Top Access Panel
WARNING: To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure to disconnect the power cord from the wall outlet, and allow the internal system components to cool before touching.
WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telecommunications or telephone connectors into the network interface controller (NIC) receptacles.
CAUTION: Static electricity can damage the electronic components of the computer or optional equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. See Appendix C, Electrostatic Discharge for more information.
the bottom access panel. Access toathe PCI card is throughfor more information. Refer to Adding PCI Expansion Card To access system memory or the internal hard drive, you must remove the top access panel: 1. Exit all software applications, shut down the operating system software, turn off the computer and any external devices, then disconnect the power cord from the power outlet.
www.hp.com
21
Hardware Upgrades
cable lock may access panel, An optionalaccess to internalbe used to secure the topsystem memory, preventing components including the internal hard drive, and the MultiBay security catch. It may also be used to secure the computer to a fixed object. For more information on installing or removing these security devices, refer to Appendix B, Security Provisions. 2. Remove the optional cable lock, if installed. 3. If the computer is being used in the minitower configuration: a. Loosen the thumbscrew that secures the computer to the stand 1. b. Remove the computer from the stand 2. c. Lay the computer on its side with the rubber pads on the bottom 3.
22
www.hp.com
Hardware Upgrades
4. Loosen the thumbscrew on the rear of the computer 1, slide the top access panel toward the rear of the computer 2, then lift it off.
5. To replace the top access panel, ensure that it is aligned properly, then slide it toward the front of the computer and tighten the thumbscrew to secure it. 6. Install the optional cable lock, if desired. 7. Replace the stand, if desired.
www.hp.com
23
Hardware Upgrades
DDR DIMMs
For proper system operation, the DIMMs must be industry-standard 184-pin, unbuffered PC 2100 266 Mhz-, PC 2700 333 Mhz-, or PC3200 400 Mhz-compliant 2.5 volt DDR-SDRAM DIMMs. The DDR-SDRAM DIMMs must also:
support CAS Latency 2 or 2.5 (CL = 2 or CL = 2.5) contain the mandatory Joint Electronic Device Engineering Council (JEDEC) Serial Presence Detect (SPD) information 128Mbit, 256Mbit, and 512Mbit non-ECC memory technologies single-sided and double-sided DIMMs DIMMs constructed with x8 and x16 DDR devices; DIMMs constructed with x4 SDRAM are not supported.
The following processor bus frequencies are required for the system to run at the supported memory frequencies.
Memory Frequency 266 MHz 333 MHz 400 MHz Required Processor Bus Frequency 400 MHz, 533 MHz, or 800 MHz 533 MHz or 800 MHz 800 MHz
24
www.hp.com
Hardware Upgrades
If a memory frequency is paired with an unsupported processor bus frequency, the system will run at the highest supported memory speed. For example, if a 333 MHz DIMM is paired with a 400 MHz processor bus, the system will run at 266 MHz, the highest supported memory speed.
DIMM Sockets
The system will automatically operate in single channel mode or a higher-performing dual channel mode, depending on how the DIMMs are installed.
If only one DIMM is installed, the system will operate in a single channel mode. If two DIMMs are installed, the system will operate in a dual channel mode. The maximum operating speed will be determined by the slowest DIMM. For example, if the system is populated with a 256 MHz DIMM and a 333 MHz DIMM, the system will run at only 256 MHz. For maximum performance improvement, install identical high-performance DIMMs.
CAUTION: The memory module sockets have gold-plated metal contacts. When upgrading the memory, it is important to use memory modules with gold-plated metal contacts to prevent corrosion and/or oxidation resulting from having incompatible metals in contact with each other.
CAUTION: Static electricity can damage the electronic components of the computer. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. See Appendix C, Electrostatic Discharge for more information.
www.hp.com
25
Hardware Upgrades
CAUTION: When handling a memory module, be careful not to touch any of the contacts. Doing so may damage the module.
1. Exit all software applications, shut down the operating system software, turn off the computer and any external devices, then disconnect the power cord from the power outlet. 2. Remove the top access panel. See Removing and Replacing the Top Access Panel for more information.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching.
26
www.hp.com
Hardware Upgrades
3. To remove a module, press out on both latches 1 of the DIMM socket at the same time. This releases the module and partially pushes it out of the socket. 4. Lift the module from the socket. one module is If onlysamememorythat held theused in the system, it must be installed in the socket preinstalled memory module. 5. To install a memory module, press out on both latches 1 of the DIMM socket at the same time. Match the notch on the module with the tab on the memory socket. Firmly push the module straight into the socket 2, ensuring that the module is fully inserted and properly seated. The latches will close automatically when the module is seated correctly, securing the module in the slot 3.
6. Replace the top access panel. computer starts When theand automaticallyup, it will recognize the system memory upgrade reconfigure the system.
www.hp.com
27
Hardware Upgrades
7. Install the optional cable lock, if desired. 8. Replace the stand, if desired.
Parallel and serial I/O card Wireless LAN card Graphics card FireWire card Modem card NIC card
28
www.hp.com
Hardware Upgrades
3. If the computer is being used in the minitower configuration, remove the computer from the stand: a. Loosen the thumbscrew that secures the computer to the stand 1. b. Remove the computer from the stand 2. c. Lay the computer on its side with the rubber pads up 3.
www.hp.com
29
Hardware Upgrades
4. Loosen the thumbscrew on the rear of the computer 1, slide the bottom access panel toward the rear of the computer 2, then lift it off.
210
www.hp.com
Hardware Upgrades
5. If a PCI slot cover is in place, open the latch 1 and slide the PCI slot cover out 2.
www.hp.com
211
Hardware Upgrades
6. If the latch is not open, open it 1 and slide the expansion card into the PCI bay 2.
sure to Whensoyou install an expansion card, beproperly press firmly on the card that the whole connector seats in the expansion card slot. 7. Close the latch firmly to secure the card in place. 8. To replace the bottom access panel, ensure that it is aligned properly, then slide it toward the front of the computer and tighten the thumbscrew to secure it. 9. Install the optional cable lock, if desired. 10. Replace the stand, if desired.
212
www.hp.com
Hardware Upgrades
3. Gently pull the release lever away from the hard drive 1. 4. Slide the drive toward the power supply, then lift the drive up and out of the computer 2.
www.hp.com
213
Hardware Upgrades
removing cables, pull connector When This will help prevent on thedamage. instead of the cable itself. cable 5. Disconnect the flat ribbon data cable 1 from the hard drive by pulling the connector out of the socket in the hard drive. 6. Disconnect the power cable 2 from the hard drive by pulling the connector out of the socket in the hard drive.
Disconnecting the Data Cable and Power Cable from the Hard Drive
7. Transfer the four screws from the old drive to the new one. The screws take the place of drive rails. 8. Connect the flat ribbon data cable 1 and power cable 2 to the new hard drive. 9. Gently set the hard drive into the drive cage, then slide the drive forward until it locks. 10. Replace the top access panel. 11. Install the optional cable lock, if desired. 12. Replace the stand, if desired.
214
www.hp.com
Hardware Upgrades
Working with
the MultiBay
MultiBay CD-ROM Drive MultiBay CD-RW Drive MultiBay DVD-ROM Drive with Software MPEG-2 MultiBay CD-RW/DVD-ROM Combo Drive MultiBay 1.44-MB Diskette Drive MultiBay SMART Hard Drive
The MultiBay is a special drive bay that supports a variety of optional 12.7-mm removable drives, including:
CAUTION: To prevent loss of work and damage to the computer or a drive: Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid touching the connector. Before traveling with, shipping, storing, or removing a drive other than a hard drive, make sure that no media, such as a diskette, CD-ROM, or DVD-ROM, is in the drive and that the media tray is closed. Handle a drive carefully: do not use excessive force when inserting it, do not drop it, and do not press on the top cover. Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields such as monitors or speakers. If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective packaging and label the package Fragile: Handle with Care.
www.hp.com
215
Hardware Upgrades
CAUTION: To prevent damage to the computer, the drive, and any data stored on the drive: If you are inserting or removing a hard drive, shut down the computer. Never remove a hard drive while the computer is on or on standby. To ensure that the computer is not on standby, turn the computer on, then shut it down.
CAUTION: After inserting an optical drive while the computer is powered on, restart the computer to ensure the optical drive functions correctly if it uses recording, backup, or video playback software applications.
If the computer is running Windows 2000 or Windows XP, you can insert or remove any drive except a hard drive while the computer is on, off, or on standby. Hot-swapping is disabled, by default, for the MultiBay 1.44-MB Diskette Drive. To enable hot-swapping, complete the following steps: 1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart the Computer. 2. When the F10 = Setup message is displayed in the lower-right corner of the screen, press the F10 key. do not press the F10 key message If yourestart the computer again while the the utility.is displayed, you must to access 3. Select the language from the list and press the Enter key. A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security, Power, and Advanced. 4. Use the arrow keys to select Advanced > Power-on Options > Hot-Pluggable MB Floppy, then click Enable. 5. To apply and save changes, click File > Save Changes and Exit. For more information about using Computer Setup, refer to the Computer Setup (F10) Utility Guide.
216
www.hp.com
Hardware Upgrades
Windows XP Professional
1. Click Start. 2. Right-click My Computer, then click Manage. 3. Click Storage, then click Disk Management. 4. Select the MultiBay hard drive. 5. Right-click on the MultiBay hard drive, then click Partition. Carefully read and respond to any prompts that appear on the screen. Refer to the online Help (click Action > Help) for additional information.
www.hp.com
217
Hardware Upgrades
218
www.hp.com
Hardware Upgrades
If the device does not start, ensure that the necessary device drivers are installed on the system. If they are not available, they may be downloaded, at no cost, from the HP Web site at www.hp.com.
www.hp.com
219
Hardware Upgrades
1. To release the MultiBay security catch, you must first remove the top access panel. See Removing and Replacing the Top Access Panel for more information. 2. Lift the tongue of the catch up and slide the catch toward the front of the computer until it is disengaged.
220
www.hp.com
Hardware Upgrades
4. Pull the eject lever towards the front of the computer 1 to eject the drive from the MultiBay 2.
www.hp.com
221
A
Specifications
Compaq Business Desktop Computer
Desktop Dimensions (in the minitower position) Height Width Depth Approximate Weight Weight Supported (maximum distributed load) Temperature Range (values subject to change with increasing altitude above sea level) Operating Nonoperating 50 to 95 F -22 to 140 F 10 to 35 C -30 to 60 C 12.40 in 2.75 in 13.07 in 13.9 lb 100.0 lb 315 mm 70 mm 332 mm 6.3 kg 45.5 kg
Operating temperature is derated 1.0 C per 300 m (1,000 ft) to 3,000 m (10,000 ft) above sea level, no direct sustained sunlight. Maximum rate of change is 10 C (50 F)/Hr. The upper limit may be limited by the type and number of options installed.
Relative Humidity (noncondensing) Operating (28 C (82.4 F) max wet bulb) Nonoperating (38.7 C (101.66 F) max wet bulb) Mechanical Shock (11ms 1/2 sine shock pulse) Operating Nonoperating Vibration (random, Gs nominal) Operating (10 to 300 Hz) Nonoperating (10 to 500 Hz) .25 .50 .25 .50 5 Gs 20 Gs 5 Gs 20 Gs 10 to 90% 5 to 95% 10 to 90% 5 to 95%
www.hp.com
A1
Specifications
*This system uses a passive power factor corrected power supply when used in the 230V mode. This allows the system to pass the CE mark requirements for use in the countries of the European Union.
A2
www.hp.com
B
Security Provisions
Installing an Optional Security Lock
The security locks displayed below and on the following page can be used to secure the Compaq Business Desktop computer.
www.hp.com
B1
Security Provisions
Installing a Padlock
Input/Output Security
Refer to the Computer Setup (F10) Utility Guide and the Desktop Management Guide for more information on security features available on Compaq Business Desktops.
B2
www.hp.com
C
Electrostatic Discharge
A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device.
Avoid hand contact by transporting and storing products in static-safe containers. Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations. Place parts on a grounded surface before removing them from their containers. Avoid touching pins, leads, or circuitry. Always be properly grounded when touching a static-sensitive component or assembly.
Grounding Methods
There are several methods for grounding. Use one or more of the following methods when handling or installing electrostatic-sensitive parts:
Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm +/- 10 percent resistance in the ground cords. To provide proper ground, wear the strap snug against the skin.
www.hp.com
C1
Electrostatic Discharge
Use heelstraps, toestraps, or bootstraps at standing workstations. Wear the straps on both feet when standing on conductive floors or dissipating floor mats. Use conductive field service tools. Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, contact an authorized dealer, reseller, or service provider.
For more information on static electricity, contact an authorized dealer, reseller, or service provider.
C2
www.hp.com
D
Routine Computer Care and Shipping Preparation
Routine Computer Care
Follow these suggestions to take care of the computer and monitor:
Operate the computer on a sturdy, level surface. Leave a 3-inch (7.6-cm) clearance at the back of the system unit and above the monitor to permit the required airflow. Never operate the computer with the cover or side panel removed. Never restrict the airflow into the computer by blocking the front vents or air intake. Do not place the keyboard, with the keyboard feet down, directly against the front of the desktop unit as this also restricts airflow. Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold. For information about the recommended temperature and humidity ranges for the computer, refer to Appendix A, Specifications in this guide. Keep liquids away from the computer and keyboard. Never cover the ventilation slots on the monitor with any type of material. Turn off the computer before you do either of the following:
Wipe the exterior of the computer with a soft, damp cloth as needed. Using cleaning products may discolor or damage the finish. Occasionally clean the air vents on the front and back of the computer. Lint and other foreign matter can block the vents and limit the airflow.
www.hp.com
D1
MultiBay Precautions
Be sure to observe the following guidelines while operating or cleaning the MultiBay.
Operation
Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid touching the connector. Before traveling with, shipping, storing, or removing a drive other than a hard drive, make sure that no media, such as a diskette, CD-ROM, or DVD-ROM, is in the drive and that the media tray is closed. Handle a drive carefully: do not use excessive force when inserting it, do not drop it, and do not press on the top cover. Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields such as monitors or speakers. If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective packaging and label the package Fragile: Handle with Care. To prevent damage to the computer, the drive, and any data stored on the drive: If you are inserting or removing a hard drive, shut down the computer. Never remove a hard drive while the computer is on or on standby. To ensure that the computer is not on standby, turn the computer on, then shut it down. Before removing an optical or diskette drive, stop the drive by using the Safely Remove Hardware icon on the Windows XP task bar or the Unplug or Eject Hardware icon on the Windows 2000 task bar. Restart the system to ensure the optical drive functions correctly with the software applications.
Cleaning
Clean the panel and controls with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Never spray cleaning fluids directly on the unit. Avoid using any type of solvent, such as alcohol or benzene, which may damage the finish.
www.hp.com Hardware Reference Guide
D2
Safety
If any object or liquid falls into the drive, immediately unplug the computer and have it checked by an authorized service provider.
Shipping Preparation
Follow these suggestions when preparing to ship the computer: 1. Back up the hard drive files on DiskonKeys, CDs, DVDs, tape cartridges, or diskettes. Be sure that the backup media is not exposed to electrical or magnetic impulses while stored or in transit.
The hard drive locks automatically when the system power is turned off.
2. Remove and store separately any removable media or MultiBay drives. See Removing a Drive from the MultiBay for more information. 3. Turn off the computer and external devices. 4. Disconnect the power cord from the electrical outlet, then from the computer. 5. Pack the system components, MultiBay drives, and external devices in their original packing boxes or similar packaging with sufficient packing material to protect them. 6. Disconnect the system components and external devices from their power sources, then from the computer. are seated properly Ensure that all boardsthe computer. and secured in the board slots before shipping 7. Pack the system components and external devices in their original packing boxes or similar packaging with sufficient packing material to protect them.
Index
A
access panel removal of bottom 28 to 210 removal of top 21 to 23
G
graphics, PCI card 28 grounding methods C1
C
cable lock, optional B1 CD drive, MultiBay 215 components front panel 12 rear panel 13 computer care D1 configuration, minitower or desktop 17
H
hard drive, internal, removing and replacing 213 to 214 hard drive, MultiBay 215, 217, 218, 220 partitioning and formatting 217 hot-plugging or hot-swapping MultiBay drives 216
I
input/output security B2 installing hard drives, MultiBay 218 to 219 internal hard drive 213 to 214 MultiBay drives 218 to 219 optical drive 216 PCI expansion card 28 to 212 internal hard drive, upgrading 213 to 214
D
desktop configuration 17 DIMM, adding system memory 24 to 27 diskette drive, MultiBay 215, 220 drives, MultiBay 215 DVD drive, MultiBay 215
E
Easy Access Keyboard 14 to 15 customizing buttons 15 electrostatic discharge C1 expansion card installing 28 to 212
K
keyboard 14 customizing 15 Windows Logo Key 15
F
FireWire, PCI card 28 formatting MultiBay hard drive 217 front panel components 12
L
locks cable B1 padlock B2
www.hp.com
Index-1
Index
M
memory, system 24 to 27 adding or removing modules 25 to 27 minitower configuration 17 modem, PCI card 28 mouse, programming special functions 16 MPEG-2 software 215 MultiBay 215 to 221 CD drives 215 CD-RW/DVD-ROM combo drive 215 diskette drive 215, 220 DVD drive 215 hard drive 218, 220 hot-plugging or hot-swapping drives 216 inserting drives 218 MPEG-2 software 215 optical drive 216, 220 optional drives 215 partitioning and formatting hard drive 217 precautions 215 removing drives 220 to 221 security 219 to 220
PCI card FireWire 28 graphics 28 installing 28 to 212 modem 28 NIC 28 parallel and serial I/O 28 wireless LAN 28
R
rear panel components 13
S
security B1 to B2 input/output B2 MultiBay 219 to 220 serial number 16 shipping preparation D1, D3 specifications A1 static electricity C1 SuperDisk LS-240 drive, MultiBay 215
T
top access panel, removal 21 to 23
N
NIC, PCI card 28
W
Windows Logo Key 15 wireless LAN, PCI card 28
O
optical drive, MultiBay 216, 220
P
padlock, optional B2 panel removal of bottom access 28 to 210 removal of top access 21 to 23 parallel and serial I/O, PCI card 28 partitioning MultiBay hard drive 217
Index-2
www.hp.com