Professional Documents
Culture Documents
HATLAPA Compressor W Series W55 W80 W110 W140
HATLAPA Compressor W Series W55 W80 W110 W140
STRUCTURAL FEATURES:
Two staged, vertical construction with one cylinder differential piston, exchangeable, dry cylinder liners VALVES:
1st stage: Combined suction and pressure valve W55: 2nd stage: 1 suction and pressure valve each
W80, W110, W140: 2nd stage: Combined suction and pressure valves WATER CooLing: Intercooler and aftercooler W55: Oil level inspection glass W80, W110, W140: Gear pump directly driven by the crankshaft
SpLASh LUbRiCATion:
Oil pressure control by means of pressure gauge and pressure switch Oil level inspection glass Crankcase venting through vent filter on oil filler
Lubrication of 1st stage by means of dosing pump with sight glass at the cylinders bEARingS:
W55: Crankshaft: Ball bearings W80, W110, W140: Slide bearings Connecting rod: Slide bearings Wrist pin: Slide bearings
Type
Cylinders
Stage
Speed r.p.m
1150 1450 1750 1150 1450 1750 1150 1450 1750 1150 1450
F.A.d m/h
42 53 63 63 80 93 83 106 130 115 145
power kW
10 13 16 14.5 18 22.5 17 23 29 24.5 32
A
945 945 945 1265 1227 1265 1349 1349 1411 1411 1439
dimensions b
600 600 600 820 820 820 850 850 850 850 850
C
950 950 950 1055 1055 1055 1130 1130 1130 1130 1170
W55
W80
W110
W140
All data apply to a final pressure of 30 bar. The right for alteration of specification and data to incorporate improvements in design is reserved.
Version: 09/2010
Illustrations, technical data, weights and dimensions are subject to alteration without previous notice.