You are on page 1of 4

Device Architecture

UIQ,S60,Trolltech,QC Brew, Digital Airways etc.

2G/3G Handset
UI Software OS Symbian,Linux Windows Mobile etc Nucleus, AMX, Montavista Linux, Rex etc RTOS

UIQ , S60 ,Trolltech , Openwave ,Obigo, Palm source , Sasken, Jataayu etc.

Application Software Middleware Protocol Stack Philips,Sasken , Esmertec etc.,

Hardware & Chipset

Qualcomm, Ericsson MP, Philips, LSI, Free scale, TI

Qualcomm, Ericsson MP, Philips, LSI, Free scale, TI, Comneon etc

Protocol Test Requirement


Conformance test that is specified in 3GPP specification 34.123. Except that most handset manufacturers perform more tests using the Network Simulators. Then they have to perform IOT (Inter Operability test), Live air testing, Field Testing and KPI (Key Performance Index) testing, etc. There are many different types of Conformance tests that the handset should be able to pass. Generally the handset has to pass 95% of the tests to be GCF certified. The following are the main categories of Conformance:

RF conformance - This is based on 3GPP specifications 34.121. Recently due to its size, it has been split into 34.121-1 and 34.121-2. Protocol conformance - This is based on 3GPP specifications 34.123. It is split into 34.123-1,
34.123-2 and 34.123-3 for 3G and TS 51.010 for GSM/GPRS/EDGE devices.

GCF Certification is only done for Protocol Conformance tests based on 34.123. These tests are written in TTCN and are contained in 3GPP TS 34.123-3 drafted by ETSI on behalf of 3GPP. They are debugged and verified by individual SS vendors on their platforms prior to submission for 3GPP TSG-T1 approval. Once approved by 3GPP test cases are validated by an independent test house and submitted for approval by the GCF.

USIM conformance - This is based on 3GPP specifications 31.122.


USIM functional test - (TS 31.121) Identification, PIN, account charging, network priority,
phonebook UICC test (SIM electrical test)- (TS 102.230) Power on/off, 1.8v/3v detection, presence Detection bit/character transmitting duration, command processing and error handling,

Acoustic conformance- (TS 26.132) Loudness rating, idle noise, echo

Protocol Signaling conformance Message A (Layer 1/2/3 NAS)

Protocol signalling scenarios :


Idle and Connected Mode Mobility Circuit and Packet Switched Services Inter-RAT Multi-Services and their combinations

Message B (Layer 1/2/3 NAS)

UE Network
NO FAIL Is type and format of B correct (within given Timer limits & Specs)? YES PASS

RF & RRM conformance Radio scenarios :


Idle and Connected Mode Mobility Circuit and Packet Switched Services Inter-RAT Multi-Services and their combinations
Node B

Node B

Node B
No Service Poor Signal Strength Poor Signal Quality Call Drop Voice Muting

You might also like