Professional Documents
Culture Documents
1. INSPECT VOLTAGE OF ENGINE CONTROL MODULE (ECM) Check the voltage between each terminal of the wiring connectors. Turn the ignition switch ON. Measure the voltage at each terminal. HINT: Do all voltage measurements with the connectors connected. Verify that the battery voltage is 11 V or more when the ignition switch is ON.
EG2254
3VZE ENGINE MFI SYSTEM
Terminals
Condition
STD voltage
Throttle valve fully closed (Throttle opener must be cancelled first) Throttle valve fully open
Ignition SW. ON Idling 3,000 rpm Ignition SW ON Ignition SW 4N Cranking Ignition SW ON Idling
Intake air temperature 20C (68F) Engine coolant temperature 80C (176F0
No trouble (malfunction indicator lamp off) and engine running Cranking Stop light switch ON Engine Control Module (ECM) Terminals Engine coolant temperature 80C (176F)
EG2255
3VZE ENGINE MFI SYSTEM
Condition
Resistance ()
Throttle valve fully closed (Throttle opener must be cancelled first) Throttle valve fully open Throttle valve fully closed (Throttle opener must be cancelled first) Volume air flow meter connector disconnected Intake air temperature 20C (68F) Engine coolant temperature 80C (176F)
Throttle position sensor connector disconnected Measuring plate fully closed Measuring plate fully open Cold (10 50C, 14 122F) Hot (50 100C, 122 212F) Cold (10 50C, 14 122F) Hot (50 100C, 122 . 212F) Engine Control Module (ECM) Terminals