Professional Documents
Culture Documents
Steel: 34crmo4
Steel: 34crmo4
Steel: 34crmo4
F65
34CrMo4
Variant: F65W: Consumable electrode remelted grade
SPECIFICATIONS
European standards: - 34CrMo4 - Numerical designation: 1.7220 AECMA: - Designation: FE-PL45 AIR WL : 35 CD 4 : 1.7220, 1.7224
COMPOSITION
Carbon ..............................................0.35 Chromium ..........................................1.00 Molybdenum......................................0.20
APPLICATIONS
Truck, turbine or rotor drive shafts, gearbox
gears, axles, half-shafts for rear axle stays.
MECHANICAL PROPERTIES
Annealed condition: heat to 825C followed by slow cooling.
- Brinell hardness: 217
CHARACTERISTICS
Good repeated impact resistance. Good fatigue properties in alternating
bend stress.
1530f
HEAT TREATMENT
Harden:
- Heat to 850C. - Oil quench.
TEMPERING CURVE
N/mm2
%
UTS - 0.2 % YS N/mm2 A %: 5d KCU: J/cm2
J/cm2
Temper:
- Depending on properties required.
PHYSICAL PROPERTIES
Density:
7.8
2300 2200 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 200 100 0
UTS
0.2 % YS
Critical points:
- Ac 1: - Ac 3: 750C 810C
A K
FORGING
1100/900C
200
300
400
500
600
700
46 44 42 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0
460 440 420 400 380 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0
The data provided in this document represent typical or average values rather than maximum or minimum guaranteed values. The applications indicated for the grades described are given as guidance only in order to help the reader in his personal assessment. Please note that these do not constitute a guarantee whether implicit or explicit as to whether the grade selected is suited to specific requirements. Aubert & Duvals liability shall not under any circumstances extend to product selection or to the consequences of that selection.
1530f
F65