Professional Documents
Culture Documents
Traffic Introduction and Analysis 3
Traffic Introduction and Analysis 3
Security Level:
7pt
0pt
: um
ial
7pt
8pt
Huawei Confidential
0pt :
B0
Content
KPI introduction Traffic item introduction Outline of analysis
um
ial
0pt B0
0pt
0pt :
lar ial
0pt
0pt
pt 0
: m
TOP10 KPI to CS
al
pt
pt
pt :
ar
al
pt
pt
Huawei Confidential
Page 3
pt 0
: m
TOP10 to CS
Immediate Assignment Success Rate [Success Rate of Call Setup (Immediate Assignment)] RA303G:CELL_ESTB_IND_SUCC_RATE_IMM_ASS Success Rate of Call Setup (Immediate Assignment) = [Call Setup Indications (Circuit Service)]x{100}/[Channel Requests (Circuit Service)]
al
pt
pt
pt :
SDCCH Congestion Rate (Overflow) [Congestion Ratio on SDCCH per CELL (due to Busy)] RR370: CELL_RATE_SD_CONG Congestion Ratio on SDCCH per CELL(due to Busy) = [ Failed SDCCH Seizures due to Busy SDCCH]*{100}/[ SDCCH Seizure Requests]
ar
al
pt
pt
SDCCH Drop Rate [Call Drop Rate on SDCCH] ZTR104C: CELL_SD_CALL_DROP Call Drop Rate on SDCCH=[ Call Drops on SDCCH]*{100}/[ successful SDCCH Seizure ]
Huawei Confidential
Page 4
pt 0
: m
TOP10 to CS
TCH Congestion Rate (Overflow) [TCH Overflow Rate ] K3041: CELL_TCH_OVERFLOW_RATE Congestion Ratio on TCH per CELL(due to Busy) ([Failed TCH Seizures due to Busy TCH] *{100}/[ TCH Seizure Requests] TCH Call Drop Rate including Handovers [Call Drop Ratio on TCH per cell (including Handover)]
al
pt
pt
pt :
ZTR304: CELL_RATE_TCH_CALL_DROP_INCLUDE_HO Call Drop Ratio on TCH per cell (including Handover) = [ Call Drops on Traffic Channel]*{100}/([ Successful TCH Seizures] TCH Call Drop Rate ] ZTR304A: CELL_RATE_TCH_CALL_DROP_EXCLUDE_HO
Call Drop Ratio on TCH per cell (Excluding Handover)= [ Call Drops on Traffic Channel]*{100}/([ Successful TCH Seizures (Traffic Channel)]+[ Successful Incoming Internal Inter-Cell Handovers]+[ Successful Incoming External Inter-Cell Handovers]-[ Successful Outgoing Internal Inter-Cell Handover]-[ Successful Outgoing External Inter-Cell Handovers]) HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 5
ar
al
pt
Excluding Handovers
pt
pt 0
: m
TOP10 to CS
Handover Success Rate [Success Rate of Handover ] RH303: CELL_HO_SUCC_RATE Success Rate of Handover =([Successful Incoming Internal Inter-Cell Handovers]+[ Successful Outgoing External Inter-Cell Handovers])*{100}/([Incoming Internal Inter-Cell Handover Requests]+[ Outgoing External Inter-Cell Handover Requests])
al
pt
pt
pt :
ar
Handover RF Success Rate [Success Rate of Radio Handover ] RH303A: CELL_RD_HO_SUCC_RATE Success Rate of Radio Handover =([Successful Incoming Internal Inter-Cell Handovers]+[ Successful Outgoing External Inter-Cell Handovers])*{100}/([Incoming Internal Inter-Cell Handover Commands]+[ Outgoing External Inter-Cell Handover Commands])
al
pt
pt
Huawei Confidential
Page 6
10
pt 0
: m
TOP10 to CS
BSS Call Establishment Success Rate CSSR RA333A: CELL_BSS_CALL_ESTB_SUCC_RATE BSS Call Establishment Success Rate= [ Success Rate of Call Setup (Immediate Assignment)]*[ Success Rate of TCH Assignment] * (1- [Call Drop Rate on SDCCH])
al
pt
pt
pt :
ar
Call Complete Establishment Success Rate CCSR RA333B: CELL_CALL_CMP_SUCC_RATE Call Complete Establishment Success Rate = [ BSS Call Establishment Success Rate] *(1- [ Call Drop Ratio on TCH (Excluding Handover)] )
al
pt
pt
Huawei Confidential
Page 7
pt 0
: m
al
pt
BSC Measurement SCCP Measurement MTP3 Measurement LAPD Measurement System Load Measurement BTSM Management Resources Measurement
MSC Measurement CBC Measurement PCU Measurement Paging Measurement Call Measurement MR Measurement Channel Measurement
pt
pt :
ar
al
pt
pt
Huawei Confidential
Page 8
pt 0
: m
Key Measurement
al
pt
pt
pt :
ar
al
pt
pt
Huawei Confidential
Page 9
pt 0
: m
Practice
1. 2. 3. 4. 5. 6.
al
How to check the reason of HO? List all of reason. Which reason means PBGT HO? Which message is received by BSC, count it call drop? Which KPI just now mentioned appear in KPI Measurement per Cell How to check interference? What is interference band? Which trafic item can check signal level and quality? Is this information useful to find interference, how to judge
pt
pt
pt :
6.
Which traffic item can check the distance between MS and BTS it based on and what use?
What is
ar
7. 8.
al
What use to check Receive l quality and Receive Level measurement? What is Uplink-and-Downlink Balance Measurement and what condition means no balance?
Hey, Man, it is your show time
pt
pt
9. 10.
How to know the distribution of traffic? What information does Radio Link Failure Measurement provide and how to use?
Huawei Confidential
Page 10
pt 0
: m
Common principle
al
pt
Systematical logic
From whole system to specific cell
Integrality
Observe the change trend of the items for more than one week and the changing trend of each day.
pt
pt :
ar
Relativity
Relationship between various kinds of traffic statistics items
al
pt
pt
Huawei Confidential
Page 11
pt 0
: m
Basic solution
al
pt
Preparation
At least one week traffic data Engineer parameter and geographic display of distribution of sites
pt
Step
BSC measurement-----worst KPI KPI measurement per cell------worst cell Check reason ------sub-item in Call measurement and MR measurement
pt :
ar
al
pt
pt
Huawei Confidential
Page 12
pt 0
: m
al
pt
pt
Interference Band Measurement per TRX Radio Link Failure Measurement Uplink-and-downlink Balance Receive level Receive quality TA / signal level / quality
pt :
ar
al
pt
pt
Call measurement
cause
Huawei Confidential
Page 13
pt 0
: m
al
TCH congestion
Alarm Traffic volume
pt
pt
pt :
Expansion
ar
al
pt
pt
MR Measurement
Frequently handover
Huawei Confidential
Page 14
pt 0
: m
al
pt
SDCCH congestion
Call set up IMSI attach/ detach Location area updating SMS FAX
pt
pt :
ar
al
pt
Channel requests
MOC MTC EC SMS
pt
Huawei Confidential
Page 15
pt 0
: m
al
pt
Handover
Common parameter / Clock Intra Handover/ Inter Handover Incoming Handover / Outgoing Handover Check the cell parameter
pt
pt :
ar
al
pt
pt
Huawei Confidential
Page 16
Thank you
www.huawei.com