HP02 chip should flash Red Light showing programming in progress. Green Light On programming complete and chip is reset. Cartridge is ready to use. Remove chip setter from the chip.
HP02 chip should flash Red Light showing programming in progress. Green Light On programming complete and chip is reset. Cartridge is ready to use. Remove chip setter from the chip.
HP02 chip should flash Red Light showing programming in progress. Green Light On programming complete and chip is reset. Cartridge is ready to use. Remove chip setter from the chip.
Black Cyan Magenta Yellow Photo Cyan Photo Magenta
20ml 8ml 7ml 12ml 11ml 11ml
All Cartridges contain 100% more ink than original HP
RESET THE HP02 CHIP
A) Light Off Chip setter off B) Red Light Flashing Line up the prongs on the chip resetter with the contact points on the cartridge chip and push the resetter down onto the chip. The red light should then flash showing programming in progress. C) Green Light On Programming complete and chip is reset. OK. Remove the chip setter from the chip. Cartridge is ready for use. D) Red Light On Programming not sucessful. Try again.