Professional Documents
Culture Documents
- FIRE DETECTION AND ALARM PRODUCTS & SERVICES - FIRE SUPPRESSION PRODUCTS & SERVICES - RELATED INSTALLERS
A Specifiers Guide
CONTENTS
1 Fire detection and alarm products, systems & cables 1 SECTION 1 LPS 1014 certified fire detection and alarm system firms 3 SECTION 2 Fire detection and alarm systems 14 SECTION 3 Control and indicating equipment 17 SECTION 4.1 Commercial detectors 147 SECTION 4.2 Domestic alarms - smoke, heat and carbon monoxide 269 SECTION 5 Manual call points 274 SECTION 6 Line units 300 SECTION 7 Alarm Warning Devices 319 SECTION 8 Fire resistant cables 360 SECTION 9 Alarm receiving centres 428 SECTION 10 Alarm transmission and fault monitoring equipment and signalling systems 430 SECTION 10.1 Alarm transmission and fault routing equipment 432 SECTION 10.2 Alarm transmission and fault routing equipment and systems 433 SECTION 10.3 Signalling systems 437
ii
12 Sep 2011
INDEX
2 2M KABLO SAN. ve TIC. A.S. 362 A AC Electrical Wholesalers Ltd 363 ADI International 148, 300 ADT Fire and Security 3, 4 Advanced Electronics Limited 18, 150, 274, 301, 320 Advantronic Systems S.L. 152, 275, 320 AEI Cables Limited 363 Aguilera Electronica S.L 153 Alarm Supply Pte Ltd 154 Alberta Fire & Security Equipment Limited 5 Alpha Fire Services W.L.L. 368 AMPAC Europe Limited 19 AMPAC Technologies PTY Ltd 20, 275 Apollo Fire Detectors Limited 155, 276, 301, 320 Application Solutions (Safety & Security) Ltd 21 Argus Fire Protection Company Limited 5 Argus Security S.r.l. 163, 277, 303, 322 Argus-Spectrum Co 166, 277, 322 ATEIS Middle East FZCO 168, 277, 323 ATOM KABLO SANAYI VE TICARET A.S. 368 Autronica Fire & Security AS 303, 323 B Bailey Maintenance 5 Bangkok Cable Co Limited 368 Banham Alarms (Prop Banham Patent Locks Limited) 428 Bardic by Honeywell 22, 170 BBC Fire Protection Limited 5 Beijing Leader Huaxin Electronics Co. Ltd 171 Bentel Security s.r.l. 278 Biamp Systems Corporation 22 BT Redcare 433, 437 C Carillion 23 Cavicel SpA 370 CEAG 24 Ceasefire Industries Ltd 171, 278, 324 Chubb Fire & Security Limited 5 Chubb Fire Ltd 172, 303 Chubb Scurit 25 Clymac Limited 6 Computionics Limited (Trading as C-Tec) 27 Consilium Marine and Safety AB 172 Context Plus Ltd 173, 278, 304, 372 Control Equipment Limited 14, 33 Cooper Controls Limited (trading as Integrated Solutions) 6 Cooper Fulleon Limited 279, 326 Cooper Industries Inc 36, 173, 279 Cooper Lighting and Safety Ltd 37 Cooper Safety 174 Cooper Scurit SAS 177 Cranford Controls Limited 326 CSL DualCom Limited 434 CTM Fire and Security Limited (Leyland & London Offices) 6 D Daemon Fire and Security Limited 6 Dtwyler Cables 373 Defensor Group Limited 6 Detector Electronics Corporation 39, 178, 304 Digital Security Controls, a Division of Tyco Safety Products Canada Ltd 269 Direction Fire Limited 7 Doncaster Cables 374 Draka UK Limited 375 Dubai Cable Company (Private) Limited 379 Dubai Cable Company (Private) Limited, Trading as Ducab 380, 381 E Eland Cables 384 EMCO 178, 280, 327 EMCOR Facilities Services Limited, EMCOR Specialist Services 7 EMCS - East Midlands Central Station Limited 428 Emergi-Lite Safety Systems (Thomas & Betts Ltd) 180, 280, 305 Emirates Fire Fighting Equipment Factory L.L.C. (FIREX) 181, 280, 327, 384 Eurotech Fire Systems Ltd 182 Everday Technology Co. Limited 183, 280 Eyston Company Ltd 270 F FFE Fire & Security Limited 7 Fike Safety Technology Ltd 40 Fire Fighting Enterprises Ltd 184 FireAngel Ltd (A Division of Sprue Aegis plc) 270 Fireblitz Extinguisher Ltd 271 Fireguard Safety Equipment Co Ltd 184, 281, 327, 385 Firelite by Honeywell 41 Fireonica Co. Ltd 185, 281 Firetecnics Systems Limited 7 FIREX Protection System Technology Ltd 42, 186, 281, 305, 328 G GBE Fire & Security (a division of GB Electronics Limited) 7 GE Security Inc 306 GE Security Inc (Trading As Edwards System Technology) 187, 306, 328 Gent By Honeywell 43, 188, 282, 307, 328 GEZE GmbH 192 Gira Giersiepen Gmbh & Co. KG 271 Global System Technology Plc 47, 192, 282, 307, 333, 385 Grainger Fire Systems 8 Group 4 Securicor Plc 49, 193, 283, 308, 333 Grupo General Cable Sistemas, S.A. 386, 387 Gulf Security Technology Co. Ltd (Manufacturing Division of Global System Technology PLC) 51, 194, 283, 308, 333 H Haes Systems Limited 53 Hall & Kay Fire Engineering (Thame) 8
12 Sep 2011
iii
INDEX
Hallmark Fire (a division of SFS Fire Services Ltd) 8 HDR 195, 283, 308, 334 Hochiki America Corporation 196 Hochiki Corporation 197 Hochiki Europe (UK) Limited 197, 284, 309, 336 Honeywell Automation (I) Pvt. Ltd 202 Honeywell Control Systems Limited 202, 309 Honeywell Control Systems Ltd 54, 205, 284, 310 Honeywell International Inc 59 Horing LIH Industrial Co Ltd 206, 285, 344 Hosiden Besson Limited 345 Huzhou Jiusheng Electric Co Ltd 388 I I.C. Service & Maintenance Limited 8 Industrial Scientific Oldham 207 INIM Electronics s.r.l. 209, 310 Irish Driver-Harris Company Limited 388 J Jaylow Supplies Ltd 393 K KAC Alarm Company Limited 285, 346 Keystone Electric Wire & Cable Company Ltd 394 Kidde Finland Oy 271 Kidde Products Ltd 210 Kidde Products Ltd, trading as AirSense Technology 211 Kidde Safety Europe Ltd 272 Kingfell Plc 8 Kingfisher Security (UK) Limited trading as Kingfisher Fire & Security 9 KME Italy SpA 395 L Labor Strauss Sicherungsanlagenbau GmbH 212, 289 LEONI Studer AG 396 Lichfield Fire & Safety Equipment Co. Ltd 213 Lloret Fire and Security Limited 9 M M. J. Quinn Integrated Services Limited 9 Mavili Elektronik Ticaret Ve Sanayi A.S. 213 MECE Fire & Security Limited 9 Mercury Engineering 9 MGC Systems Corp. 289 MITIE Technical Facilities Management Limited 10 MITIE Technical Facilities Management Limited (MITIE Fire and Security Systems) 10 Morley-IAS Fire Systems By Honeywell 60, 214, 216, 290, 310, 349 MSA AUER 217 Multron Systems Pte Ltd 68, 218, 290, 311, 349 N NAJD ELECTRICALS & SAFETY EQUIPMENT TRADING 401 National Monitoring (Prop. AVR Group Limited)429 Nexans Turkiye Endustri ve Ticaret A.S. 402 Ningbo Siterwell Electronics Co., Ltd. 272 Niscayah Limited 10 Nitin Ventures FZE 69, 219, 291, 311 Nittan (UK) Limited 220 Nittan Fire Protection (Zhongshan) Co Ltd 221 Norden Communication UK Ltd 403 Notifier by Honeywell 291, 350 Notifier Fire Systems by Honeywell 16, 71, 222, 311 Notifier Fire Systems India 225 O OG Elektronik 225, 292, 351 Olympia Electronics S.A. 78 P PEL Services Limited 10 Pelco Finland Oy 79, 227, 292, 312 Philton Fire & Security Limited 229 Pittway Tecnologica Srl. 230, 312 Plana Fabrega 234 Protec Fire Detection plc 11, 82, 235, 292, 313, 351 Prysmian Cables & Systems Limited 403 Prysmian Cables & Systems Ltd 404 Prysmian Power Cables & Systems Australia Pty Limited 411 R R & S Fire & Security Services Limited 11 RAMCRO S.p.A 412 Raysil Security Systems Limited 11 S Safety Technology International (Europe) Limited 293 Safex Fire Services Limited 239 Sareme UAB 239, 293 Schlumberger Oilfield UK PLC, Sensor Highway Limited (Schlumberger, Southhampton) 240 Scotshield Limited 11 Security Services (Prop Bryan Enterprises Ltd.) 429 Shakun Polymers Limited 414 SHIELD FIRE, SAFETY & SECURITY LTD 85, 240, 293, 313, 352, 414 Siemens plc, Building Technologies, Fire Safety Division 12 Siemens Switzerland Limited, Building Technologies Division 86, 241, 294, 313, 352 SMS 94, 245, 295, 315 Southern Monitoring Services Limited 429 Spectrex Inc 246 Static Systems Group Plc 12 Sterling Safety Systems 248, 295, 353 Suzhou Cableplus Technologies Co., Ltd. 415 Synaps Technology Srl 295 System Sensor 250 System Sensor Europe 353 System Sensor, Honeywell International (I) PVT. Limited 251 T T V F (UK) Limited 12 Tai Sin Electric Limited 415 Talentum Developments Limited 253 Tamlite Emergency & Fire 254 Teledata S.r.l. 254, 296, 355 TELE-FONIKA Kable Sp. z o.o., S.K.A. 416
iv
12 Sep 2011
INDEX
Texecom Ltd 355 Thameside Fire Protection Co. Limited 12 Thorn Security Limited, Trading as Tyco Safety Product 95 Thorn Security Limited, trading as Tyco Safety Products 256, 296, 315, 357 Tratos Cavi SpA 419 Trinity Protection Systems Limited 12, 13 Tyco Fire and Integrated Solutions (the trading company for Tyco Fire and Integrated Solutions (UK) Limited and Tyco Fire and Integrated Solutions (Ireland) Limited) 13 Tyco Thermal Controls Canada Limited 420 Tyco Thermal Controls Huzhou Co Limited 421 Tyco Thermal Controls UK Ltd 423 U Union Cable Company Ltd 425 UTC Fire & Security (Africa) trading as Ziton 16, 105, 259, 316 UTC Fire & Security (Pty) LTD Trading as Ziton 296 UTC Fire & Security Americas Corporation, Inc. 119, 259, 297, 316 UTC Fire & Security BV 120, 259, 298, 317 UTC Fire & Security Inc. Trading as Edwards Systems Technology 358 V Ventcroft Limited 425 Vimpex Limited 317, 359 Vipond Fire Protection Limited 13 Visonic 272 VRC Terofire Products 262 W WebWayOne Ltd 434 Weckx Handelsonderneming 273 Wrexham Mineral Cables 426 X Xtralis Pty Limited 144, 262 Z Zeta Alarm Systems by GLT Exports Limited 144, 267, 273, 299, 318, 359, 427
12 Sep 2011
Part 1
FIRE DETECTION AND ALARM PRODUCTS, SYSTEMS & CABLES
12 Sep 2011
PART 1: SECTION 1
LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMS WHY USE AN LPS 1014 APPROVED COMPANY? Even with the best equipment, fire detection and alarm systems are only effective if correctly designed, installed, commissioned and serviced. It is therefore important that specifiers select only competent firms with a proven track record to undertake the work. LPS 1014 Requirements for Certificated Fire Detection and Alarm System Firms meets these requirements in full. LPS 1014 requires one encompassing Certificate of Conformity for the project, i.e. single point responsibility, which benefits all parties concerned, i.e. the insurer, the fire brigade, the building owner, etc. It is based on BS 5839-1 and also requires the use of third party approved products. For each system specifiers should request the issue of an LPCB Certificate of Conformity as part of the contract which: certifies that the fire detection and alarm system was designed, installed and commissioned in accordance with the installation rules applied, and ensures that the system is recorded by LPCB as a certificated fire detection and alarm installation.
The availability of more varied and sophisticated fire detection and alarm equipment means that it is even more important that firms listed to LPS 1014 are regularly assessed by LPCB for their competence to design, install, commission and service fire detection and alarm systems in accordance with acceptable installation rules or codes of practice. Additional offices Where a firm has additional offices, each office must meet the requirements of LPS 1014 to be eligible for certification, and is separately listed. Provisional Approval Firms with limited experience and track record can gain Provisional Approval in the LPS 1014 scheme. Their work is closely monitored by LPCB and when they have completed the requisite number of fire detection and alarm systems contracts over a period of not less than 2 years, and subject to satisfactory performance, they will be given full approval and listed in this section of the Red Book.
12 Sep 2011
PART 1: SECTION 1
LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMS
12 Sep 2011
PART 1: SECTION 1
LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMS
Bailey Maintenance
7 Brown Lane West, Leeds LS12 6EH, United Kingdom Tel: +44 (0)113 234 3443 Fax: +44 (0)113 222 3925 E-mail: enquiries@baileymaintenance.co.uk Website: www.baileymaintenance.co.uk
Certificate No. CFA-165 to LPS 1014
12 Sep 2011
PART 1: SECTION 1
LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMS
Clymac Limited
Cloudway Court, Belton Road, Loughborough LE11 1LW, United Kingdom Tel: +44 (0)1509 232651 Fax: +44 (0)1509 232665 E-mail: sales@clymac.co.uk Website: www.clymac.co.uk
Certificate No. CFA-154 to LPS 1014
12 Sep 2011
PART 1: SECTION 1
LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMS
12 Sep 2011
PART 1: SECTION 1
LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMS
Kingfell Plc
Capital Tower, 12th Floor, 91 Waterloo Road, London SE1 8RT, United Kingdom Tel: +44 (0)845 60 61 999 Fax: +44 (0)845 25 81 999 E-mail: enquiries@kingfell.com Website: www.kingfell.com
Certificate No. CFA-138 to LPS 1014
12 Sep 2011
PART 1: SECTION 1
LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMS
Mercury Engineering
Mercury House, Sandyford Industrial Estate, Foxrock, Dublin 18, Ireland Tel: +353 1 216 3000 Fax: +353 1 216 3006 E-mail: fireprotection@mercury.ie Website: www.mercury.ie
Certificate No. CFA-174 to LPS 1014
12 Sep 2011
PART 1: SECTION 1
LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMS
MITIE Technical Facilities Management Limited (MITIE Fire and Security Systems)
Ventura House, Ventura Park Road, Tamworth B78 3HL, United Kingdom Tel: +44 (0)1827 303251 Fax: +44 (0)1827 309798 Website: www.mitie.com
Certificate No. CFA-163 to LPS 1014
Niscayah Limited
Roding House, 970 Romford Road, London E12 5LP, United Kingdom Tel: +44 (0)20 8553 5932 Fax: +44 (0)20 8478 8052 E-mail: info@niscayah.co.uk Website: www.niscayah.co.uk
Certificate No. CFA 169 to LPS 1014
10
12 Sep 2011
PART 1: SECTION 1
LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMS
Scotshield Limited
Century House, Chapelhall Industrial Estate, Airdrie, Scotland ML6 8QH, United Kingdom Tel: +44 (0)1236 767788 Fax: +44 (0)1236 762233 E-mail: j.baxter@scotshield.com Including the following satellite office for service work only Unit 2, 9 Lotland Street, Inverness ML1 8QH Tel: +44 (0)1463 709637 Fax: +44 (0)1463 709638
Certificate No. CFA-150 to LPS 1014
12 Sep 2011
11
PART 1: SECTION 1
LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMS
T V F (UK) Limited
59-69 Queens Road, High Wycombe, Buckinghamshire HP13 6AH, United Kingdom Tel: +44 (0)1494 450641 Fax: +44 (0)1494 465378 E-mail: customer.service@tvfltd.co.uk Website: www.tvfltd.co.uk
Certificate No. CFA-128 to LPS 1014
12
12 Sep 2011
PART 1: SECTION 1
LPS 1014 CERTIFIED FIRE DETECTION AND ALARM SYSTEM FIRMS
Tyco Fire and Integrated Solutions (the trading company for Tyco Fire and Integrated Solutions (UK) Limited and Tyco Fire and Integrated Solutions (Ireland) Limited)
1610 Park Avenue, Aztec West, Almondsbury, Bristol BS32 4UA, United Kingdom Tel: +44 (0)1454 240071 Fax: +44 (0)1454 626443 Website: www.tycofis.com
Certificate No. CFA-170 to LPS 1014
Tyco Fire and Integrated Solutions (the trading company for Tyco Fire and Integrated Solutions (UK) Limited and Tyco Fire and Integrated Solutions (Ireland) Limited)
Tyco House, 57-63 Farnham Road, Slough, Berkshire SL1 3TN, United Kingdom Tel: +44 (0)1753 574111 Fax: +44 (0)1753 824226 Website: www.tycofis.com
Certificate No. CFA-157 to LPS 1014
Tyco Fire and Integrated Solutions (the trading company for Tyco Fire and Integrated Solutions (UK) Limited and Tyco Fire and Integrated Solutions (Ireland) Limited)
Hillcrest Business Park, Cinderbank, Dudley, West Midlands DY2 9AP, United Kingdom Tel: +44 (0)1384 458993 Fax: +44 (0)1384 458981 Website: www.tycofis.com
Certificate No. CFA-103 to LPS 1014
12 Sep 2011
13
PART 1: SECTION 2
FIRE DETECTION AND ALARM SYSTEMS A fire detection and fire alarm system is typically made up of a number of inter-linked components including detectors, manual call points, and alarm sounders connected to control and indicating equipment by means of one or more transmission paths. All system components, including the control and indicating equipment are also connected to a power supply directly or indirectly. A fire detection and alarm system may be linked to other systems such as fire protection, or building management systems. These other systems are not considered as part of the fire detection and alarm systems. The fire detection and alarm systems may be networked together. Each of the components that constitute the fire detection and alarm system may be individually tested and approved against their appropriate standard to demonstrate their own performance and reliability but in order to ensure their compatibility and performance together within the system, certain system tests and requirements must be fulfilled. The system standard specifies the requirements for compatibility and connectability assessment of system components that either comply with the requirements of EN 54 and/or with a manufacturers specification. The standard also includes requirements for the integrity of the fire detection and fire alarm system when connected to other systems. This section lists approved fire detection and alarm systems suitable for use in buildings for the protection of people and property. The system requirements ensure the compatibility of the different components of the system work reliably together. Each component of the fire detection and alarm systems listed in this section are approved to the applicable product standard and are listed in Sections 3, 4.1, 5, 6, and 7. The approval process for the system is outlined in scheme document SD040. Systems listed in this section have been approved to LPS 1054: 2001 Requirements for the evaluation of component compatibility for fire alarm systems This standard was designed for the UK market and applies to systems incorporating control and indicating equipment and power supply equipment complying with EN 54-2 Fire detection and fire alarm systems Control and indicating equipment and EN 54-4 Fire detection and fire alarm systems - Power supply equipment respectively. Networked systems are evaluated by ensuring that each control panel connected to the network can operate as a stand alone unit, in the event of failure of the network connections, and that failure of a control panel will not affect other control panels on the network. LPCB is now accepting products for approval to EN 54-13: 2005 Compatibility assessment for system components which is applicable to the EU market. Note: Since LPCB uses national and international standards for the listing of products, in some instances, the requirements of these standards may conflict with the recommendations of local codes of practice. We recommend that specifiers seek advice from the relevant local authorities and amend their specifications accordingly.
14
12 Sep 2011
PART 1: SECTION 2
FIRE DETECTION AND ALARM SYSTEMS
Certificated Products Precept fire alarm system Comprising the following products: Control Equipment Limited Precept 2, 4, 8, 16 and 32 zone control and indicating equipment. Apollo Fire Detectors Limited 55000-100 grade 1 rate of rise heat detector (45681-200 base) 55000-200 ionization smoke detector (45681-200 base) 55000-300 photoelectic smoke detector (45681-200 base) 53531-221 grade 1 rate of rise heat detector (45681-007 base) continued 53541-151 ionization smoke detector (45681-007 base) 53541-200 photoelectric smoke detector (45681-007 base) 55000-101 grade 2 rate of rise heat detector (45681-200 base) 55000-102 grade 3 rate of rise heat detector (45681-200 base) 55000-103 range 1 rate of rise heat detector (45681-200 base) 55000-104 range 2 rate of rise heat detector (45681-200 base) 55000-210 integrating ionization smoke detector (45681-200 base) Hochiki Corporation DFE-60 grade 2 fixed temperature heat detector (YBF-RL/4H5 base) DFE-90 range 1 fixed temperature heat detector (YBF-RL/4H5 base) DCC-1EL grade 1 rate of rise heat detector (YBF-RL/4H5 base) DCC-2EL grade 2 rate of rise heat detector (YBF-RL/4H5 base) DCC-R1EL range 1 rate of rise heat detector (YBF-RL/4H5 base) Hochiki Europe SLK-E photoelectric smoke detector (YBF-RL/4H5 base) SIH-E ionization smoke detector (YBF-RL/4H5 base) KAC Alarm Company Limited KR72 manual call point. Photain Controls Limited ISD-P91 ionization smoke detector PRR-P91 grade 1 rate of rise heat detector PHD-P90 range 1 fixed temperature heat detector Signature Industries - Clifford and Snell Alarms. MCP/R/F manual call point MCP/R/S manual call point System Sensor, St. Charles, Illinois, USA. 1151E ionization smoke detector (B401 base) 2151E photoelectric smoke detector (B401 base) Discovery fire alarm system Comprising the following products: Control Equipment Limited Discovery analogue addressable control and indicating equipment Apollo Fire Detectors Limited 55000-400 grade 2 analogue temperature monitor 55000-420 grade 2 analogue temperature monitor 58000-400 Discovery temperature monitor 55000-600 analogue photoelectric smoke monitor 55000-620 analogue photoelectric smoke monitor 58000-600 Discovery optical smoke monitor 55000-500 analogue ionisation smoke monitor 55000-520 analogue ionisation smoke monitor 58000-500 Discovery ionisation smoke monitor 58000-700 Discovery multisensor monitor 55000-900 surface and flush mounted manual call point 55000-910 flush mounted manual call point 55000-950 waterproof addressable manual call point 58000-900 flush and surface mounted manual call point 58000-910 flush mounted manual call point 58000-920 surface mounted manual call point 55000-700 XP95 short circuit isolator 45681-321 XP95 negative isolating base 45681-210 XP95 addressable mounting base 018d/01 LPCB Ref. No. 018b/S1
12 Sep 2011
15
PART 1: SECTION 2
FIRE DETECTION AND ALARM SYSTEMS
Certificate No: 092f to LPS 1054 Certificated Products ZP5 Mark 5 analogue addressable fire alarm system Comprising the following products: ZP5 Mark 5 control and indicating equipment 092e/01 ZP710-2 analogue ionisation smoke detector (ZP7-SB1 base) 092n/01 ZP730-2 analogue optical smoke sensor (ZP7-SB1 base) 092n/02 ZP720-3 grade 1 analogue heat sensor (ZP7-SB1 base) 092p/01 ZP785-2 addressable flush and surface mounted call point 092d/01 Comprising of the following products: ZP3 analogue addressable control and indicating equipment 092h/01 ZP710-2 analogue addressable ionisation smoke detector 092n/01 ZP730-2 analogue addressable optical smoke detector 092n/02 ZP720-3 analogue addressable grade 1 heat detector 092p/01 ZP785-2 addressable flush and surface mounted manual call point 092d/01 ZP760-2 short circuit isolator 092j/01 LPCB Ref. No. 092f/S1
092f/S2
16
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT Control and Indicating Equipment (CIE) is a component of a fire detection and alarm system through which other components may be connected to it such as detectors, manual call points, sounders, routing equipment, voice alarm equipment and fire protection equipment. It is supplied with power from power supply equipment which may be housed within the CIE enclosure or a separate enclosure. CIE is used to receive and send out signals that are related to fire. CIE also monitors the system for faults (short and open circuit or power supply faults) and indicates the status of the fire detection and alarm system. CIE is designed to meet a European standard such as EN 54-2 or international standard such as ISO 7240-2 has certain options with requirements. For example, it may be designed to provide a signal to fire protection equipment or have dependencies on more than one alarm signal. Some CIEs have other functions which are not specified in the standard. These additional features are normally assessed such that they do not jeopardise compliance. The choice of CIE is dependant on the specific applications as recommended in the application guidelines for a specific job or building. Some CIEs have associated repeaters or mimic panels. These are normally used to repeat the indications given on the main CIE and sometimes they have control functions such as silencing sounders. There are no published standards that these repeaters or mimics can be tested against. This section lists Control and Indicating Equipment, and power supply equipment approved for use in fire detection and fire alarm systems in buildings. Repeaters or mimics that are listed in this section are only approved with their associated CIE and are subjected to the same environmental tests as the CIE. The initial approval and continued approval processes of this type of equipment is outlined in scheme document SD040. Products listed in this section have been approved to: EN 54-2: 1997 Control and Indicating Equipment; EN 54-2: 1997 + A1: 2006 Control and Indicating Equipment; EN 54-4: 1997 Power supply equipment; EN 54-4: 1997 + A1: 2002 and A2: 2006 Power supply equipment; ISO 7240-2: 2003 Control and Indicating Equipment; ISO 7240-4: 2003 Power supply equipment; Audit: Regular product auditing and regular factory inspections are carried out by LPCB ensuring high manufacturing standards and continued compliance with the applicable product standard. Notes: 1. EN 54-2: 1997 is a harmonised standard for the Construction Products Directive and CE marking is required for most of the European market from 1 August 2009. It is therefore recommended that control and Indicating Equipment are certificated to EN 54-2: 1997 + A1: 2002 2. EN 54-4: 1997 is a harmonised standard for the Construction Products Directive and CE marking is required for most of the European market from 1 August 2009. It is therefore recommended that power supply equipment are certificated to EN 54-4: 1997 + A1: 2002 and A2: 2006. 3. Since the LPCB uses national and international standards for the listing of products, in some instances the requirements of these standards may conflict with the recommendations of local codes of practice. We recommend that specifiers seek advice from the relevant local authorities and amend their specifications accordingly. 4. Where the Control and Indicating Equipment is of modular construction, and the use of certain modules (or printed circuit boards PCBs) is optional, these are listed with the applicable equipment.
12 Sep 2011
17
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Mx-1004
018c/03
Mx-1008
018c/04
Mx-1016
018c/05
Mx-1032
018c/06
18
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 8.9 Output to fault warning equipment 10 Test condition 8 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface board 16 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface board 32 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1629 Display board C1631 Repeater interface board LPCB Ref. No. 018c/R01
Mx-1108
Mx-1116
018c/R02
Mx-1132
018c/R03
Certificated with the following options with requirements from EN54-2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.11 Delay to outputs 7.12.1 Dependencies on more than one alarm signal Type A 7.12.2 Dependencies on more than one alarm signal Type B 7.12.3 Dependencies on more than one alarm signal Type C 8.3 Fault signal from points 8.9 Output to fault warning routing equipment 9.5 Disablement of each addressable point 10 Test condition Note: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. LoopSense 8281-0205 Two loop, 32 Zone analogue addressable control and indicating equipment. Incorporating the following units: BRD82MBA BRD82ZICC PSU2397 8210-0001 BRD82LSD ASS82ZICC Main Termination Board Zone Interface & Control Card Power Supply Unit 2nd loop activation Key Loop Activation Board Zone Indicator & LCD Assembly (8210) 966a/02
12 Sep 2011
19
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Certificated with the following options with requirements from EN54-2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.11 Delay to outputs 7.12.1 Dependencies on more than one alarm signal Type A 7.12.2 Dependencies on more than one alarm signal Type B 7.12.3 Dependencies on more than one alarm signal Type C 8.3 Fault signal from points 8.9 Output to fault warning routing equipment 9.5 Disablement of each addressable point 10 Test condition Note: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. LPCB Ref. No.
LoopSense 8281-0205
Certificated with the following options with requirements from EN54-2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.11 Delay to outputs 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 8.3 Fault signal from points 8.9 Output to fault warning routing equipment 9.5 Disablement of each addressable point 10 Test condition Note: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Two loop, 32 Zone analogue addressable control and indicating equipment. Incorporating the following units: BRD82MBA BRD82ZICC PSU2397 8210-0001 BRD82LSD ASS82ZICC Main Termination Board Zone Interface & Control Card Power Supply Unit 2nd loop activation Key Loop Activation Board Zone Indicator & LCD Assembly (8210)
966a/02
Certificated with the following options with requirements from EN54-2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment
20
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.11 Delay to outputs 7.12.1 Dependencies on more than one alarm signal Type A 7.12.2 Dependencies on more than one alarm signal Type B 7.12.3 Dependencies on more than one alarm signal Type C 8.3 Fault signal from points 8.9 Output to fault warning routing equipment 9.5 Disablement of each addressable point 10 Test condition Note: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. LPCB Ref. No.
12 Sep 2011
21
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Bardic by Honeywell
140 Waterside Road, Hamilton Industrial Estate, Leicester LE5 1TN, United Kingdom Tel: +44 (0) 116 246 2212 Fax: +44 (0) 116 246 2210 Website: www.bardic.co.uk
Certificate No: 154d to EN 54-2: 1997, EN 54-4: 1997 Certificated Products Bardic Zircon 2 Zone conventional controls and indicating equipment Including the following versions: 002-509-229 Language region 2, black & grey 4 Zone conventional controls and indicating equipment Including the following versions: 002-509-249 Language region 2, black & grey 8 Zone conventional controls and indicating equipment Including the following versions: 002-509-289 Language region 2, black & grey Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.11 Delays to outputs 7.12 Coincidence detection 10 Test condition Certificate No: 154g-(cl-3) to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006 Certificated Products Zircon 2 Zone Zircon 4 Zone Zircon 8 Zone 002-509-229 Bardic Zircon, 2 zone, region 2, black grey 002-509-249 Bardic Zircon, 4 zone, region 2, black grey 002-509-289 Bardic Zircon, 8 zone, region 2, black grey Incorporating the following units: 020-747 8-way relay kit 020-772 4-way monitored sounder kit Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Output to automatic fire protection equipment: Type A 7.10.3 Output to automatic fire protection equipment: Type C 7.10.4 Fault monitoring of fire protection equipment 7.11.1 Delays to outputs 7.11.2 Manual or automatic switching of delays to outputs 7.12.2 Dependency on more than one alarm signal: Type B 8.9 Output to fault warning routing equipment 10 Test condition LPCB Ref. No. 154g/06 154g/07 154g/08 LPCB Ref. No. 154d/09
Bardic Zircon
154d/10
Bardic Zircon
154d/11
22
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Vocia VACIE Voice Alarm Control and Indicating Equipment Incorporating: LSI-16 / LSI-16e Life Safety Interface: 380-P630-90 LSI-16e Main Circuit Board 380-P632-90 LSI-16e Display Board 380-P675-90 IM-16 Input Card 380-P644-90 LSI-16e Power supply board VA-8600c Amplifier: 380-0646-90 VA-8600 AM-600c Amplifier Module 380-0601-90 VA-8600 NM-1 Network Module 380-0598-90 VA-8600 Back Plane Board 380-0599-90 VA-8600 Power Supply Board 380-0633-90 VA-8600 Capacitor Board(s) 380-0629-90 VA-8600 AC Inlet Board 380-0602-90 VA-8600 Display Board 380-P622-90 VA-8600 Device ID board 380-P800-90 VFOM-1 Voice Fail Over Module WS-4 (EWS-4) Paging Microphone: 380-P625-90 WS Main Board 380-P676-90 Switch Board configured as 700-P676 WS-4 (EWS-4) WS-10 (EWS-10) Paging Microphone: 380-P625-90 WS Main Board 380-P676-90 Switch Board configured as 700-P776 WS-10 (EWS-10) CI-1 Control Interface: 380-P669-90 CI-1 Circuit Board Certified with the following options with requirements from EN 54-16: 7.3 Audible warning 7.5 Phased evacuation 7.9 Voice alarm condition output 8.3 Indication of faults related to the transmission path to the CIE 12 Emergency microphone 13.14 Redundant power amplifiers Note: The certification is conditional upon the Vocia VACIE being supplied with power from power supplies that meet the specifications detailed in the VOCIA Reference Guide, and comply with the requirements of EN 54-4. LPCB Ref. No. 977a/01
Carillion
Hamilton Industrial Park, 140 Waterside Road, Leicester LE5 1TN, United Kingdom Tel: 0116 246 2000 Fax: 0116 246 2300 Website: www.gent.co.uk
Certificate No: 042bc to EN 54-2: 1997+A1:2006 and EN 54-4: 1997 + A1:2002 + A2:2006 Certificated Products CP2-AMC Two loop analogue addressable control and indicating equipment (English language) Incorporating as modular units: 2434-859 Master Controller Board (MCB) 2434-862 Power Supply Unit 2434-762 Display and Key card (DKC) 2434-669 Loop processor card 4374-161 Text Membrane (English) 2434-861 Copper network card Scope of approval does not include the operation of the network card) LPCB Ref. No. 042bc/04
12 Sep 2011
23
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition CP4-AMC One to Four loop analogue addressable control and indicating equipment (English language) Incorporating as modular units: 2434-863 Master controller card (M.C.C) 2434-710 Loop card 2434-831 Power supply PCB 2434-854 Backplane PCB 2434-861 Display and Key card (D.K.C) 2434-864 Terminal card 2434-565 Printer Module 4374-157 Text Membrane (English) 2434-674 Copper network card Note: Scope of approval does not include the operation of the network card) 7.8 7.11 8.3 9.5 10 CP4-72-AMC Certified with the following options with requirements from EN 54-2: Output to fire alarm devices Delays to outputs Fault signals from points Disablement of each address point Test condition 042bc/11 042bc/07 LPCB Ref. No.
One to Six loop analogue addressable control and indicating equipment (English Language) Incorporating as modular units: 2434-863 Master controller card (M.C.C) 2434-710 Loop card 2434-992 Thermistor board 2434-860 Battery terminal board 2434-832 Power supply PCB 2434-854 Backplane PCB 2434-761 Display and Key card (D.K.C) 2434-864 Terminal card 2434-565 Printer module 4374-157 Text Membrane (English) 2434-674 Copper network card ( Note: Scope of approval does not include the operation of the network card) Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition
CEAG
Postfach 11 16, D-59491 Soest, Germany Tel: +44 (0)1302 303397 Fax: +44 (0)1302 303220 Website: www.ceag.de
Certificate No: 714a to EN 54-2: 1997 and EN 54-4: 1997 Certificated Products CF 3000 Analogue addressable 2 and 4 Loop control and indicating equipment LPCB Ref. No. 714a/01
24
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Incorporating the following units: ADF6 Back Assembled back box YPCB2153 Motherboard PCB YPCB2147 PSU PCB YPCB2148 2 Loop Card (2 off) ADF6Screen Touch Screen YPCB2185 Complete Display + Micro PCB ADF6 DISPCOVER Display PCB Cover ADF6FACIA Front Moulding ADF6PRINTDOOR Printer Door Moulding BAT-NP12-12 Batteries (2 off) ADF6HINGE Door Hinges ADF6OPFACIA Optional Anti Tamper Cover ADF6PRINTER Printer YPCB2187 Fire Brigade Interface Certified with the following options with requirements from EN54-2:1997: 7.8 Output to fire alarm device(s) 7.9 Output to fire alarm routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12 Coincidence detection 7.13 Alarm counter 8.9 Output to fault warning routing equipment 9.5 Disablement of each address point 10 Test condition LPCB Ref. No.
Chubb Scurit
10 Avenue du Centaure, B.P.38408-95806, Cergy-Pontoise Cedex, France Tel: +33 1 30173737 Fax: +33 1 30173707 Website: www.chubbsecurite.com
Certificate No: 747a to EN 54-2: 1997 and EN 54-4: 1997 Certificated Products Control Master 1000M-M Control Master 1000M-S 4 loop analogue addressable control indicating equipment (Medium enclosure) 4 loop analogue addressable control indicating equipment (Small enclosure) Incorporating the following units: CE00504 Main CPU CE00505 Main board display CE00506 Connection board CE00490 100W PSU and as optional modular units: CE00508 16 Zone LED module CE00507 32 Zone LED module CE00513 4 alarm zone control and indicating module CE00447 2 Way network interface CE00446 4 Way network interface CE00435A Lon high integrity isolator CE00514 16 fire protection zone control and indicating module CE00503 2 Loop System sensor interface CE00520 2 Loop Apollo interface Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition 2 loop analogue addressable control indicating equipment (Medium enclosure) 2 loop analogue addressable control indicating equipment (Small enclosure) Incorporating the following units: CE00504 Main CPU LPCB Ref. No. 747a/01 747a/01
747a/02 747a/02
12 Sep 2011
25
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products CE00505 Main board display CE00506 Connection board CE00490 100W PSU and as optional modular units: CE00508 16 Zone LED module CE00507 32 Zone LED module CE00447 2 Way network interface CE00446 4 Way network interface CE00435A Lon high integrity isolator CE00513 4 alarm zone control and indicating module CE00514 16 fire protection zone control and indicating module Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition 1 loop, analogue addressable control indicating equipment Incorporating the following units: CE00510 Main CPU CE00505 Main board display CE00506 Connection board CE00490 100W PSU and as optional modular units: CE00508 16 Zone LED module CE00436A 4 Way sounder board CE00437A 8 Way sounder board CE00507 32 Zone LED module CE00435A Lon high integrity isolator CE00513 4 alarm zone control and indicating module CE00514 16 fire protection zone control and indicating module Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition Remote unit Incorporating the following units: CE00509 Display board CE00484B Main board CE00489 40 W PSU and as optional modular units: CE00508 16 Zone LED module CE00507 32 Zone LED module CE00447 2 way network interface CE00446 4 way network interface CE00435A Lon high integrity isolator CE00513 4 alarm zone control and indicating module CE00514 16 Fire protection zone control and indicating module Control master 1000R-M Remote unit Incorporating the following units: CE00509 Display board CE00484B Main board CE00490 100 W PSU and as optional modular units: CE00508 16 Zone LED module CE00507 32 Zone LED module CE00513 4 alarm zone control and indicating module CE00447 2 Way network interface CE00446 4 Way network interface CE00435A Lon high integrity isolator CE00514 16 fire protection zone control and indicating module 747a/R02 LPCB Ref. No.
747a/03
747a/R01
The following repeaters and the remote units are approved for use with the Control Master 1000 range of control and indicating equipment (incorporating 1020 and 1010):
26
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
RS Repeater 747a/R03 RS Repeater with LCD display 747a/R04 Lon Repeater with LCD display 747a/R05 Remote unit 747a/E01 Incorporating the following units: CE00503 2 Loop System sensor interface CE00489 40W PSU and as optional modular units: CE00490 100W PSU CE00435A Lon high integrity isolator
Certificated with the following options from BS EN 54 Part 2: 7.8 Output to sounders 7.11 Delays to outputs 10 Test condition
Certificate No: 176b to EN 54-2: 1997 + A1: 2006 + A2: 2007 and EN 54-4: 1997 + A1: 2002 Certificated Products XFP502/H 2 loop, 32 zone analogue addressable control and indicating equipment using Hochiki Protocol, metal housing Incorporating the following units: SPF0706000 Switch mode power supply board SPF0501202 XFP Hochiki 2 loop, main motherboard SPF0501200 Display board "keypad display" Certified with the following options with requirements from EN 54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Note: 1) Scope of approval does not include the operation of the network functionality. 2 loop, 32 zone analogue addressable control and indicating equipment using Hochiki Protocol, metal housing + Keyswitch Incorporating the following units: SPF0706000 Switch mode power supply board SPF0501202 XFP Hochiki 2 loop, main motherboard SPF0501199 Display board "keyswitch display" Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment LPCB Ref. No. 176b/01
XFP502K/H
176b/01
12 Sep 2011
27
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Note: 1) Scope of approval does not include the operation of the network functionality. 2 Loop, 32 zone analogue addressable control and indicating equipment using Apollo Protocol, metal housing Incorporating the following units: SPF0706000 Switch mode power supply board SPF0501201 XFP Apollo 2 loop, main motherboard SPF0501200 Display board "Keypad display" Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Note: 1) Scope of approval does not include the operation of the network functionality. 2 Loop, 32 zone analogue addressable control and indicating equipment using Apollo Protocol, metal housing Incorporating the following units: SPF0706000 Switch mode power supply board SPF0501201 XFP Apollo 2 loop, main motherboard SPF0501200 Display board "Keypad display" Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality 2 Loop, 32 zone analogue addressable control and indicating equipment using Apollo Protocol, metal housing + Keyswitch Incorporating the following units: SPF0706000 Switch mode power supply board SPF0501201 XFP Apollo 2 loop, main motherboard SPF0501199 Display board "Keyswitch display" Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality. 2 Loop, 32 zone analogue addressable control and indicating equipment using Apollo Protocol + Keyswitch, metal housing Incorporating the following units: LPCB Ref. No.
XFP502/X
176b/02
XFP502/X/CON
176b/02
XFP502K/X
176b/02
XFP502K/X/CON
176b/02
28
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products SPF0706000 Switch mode power supply board SPF0501201 XFP Apollo 2 loop, main motherboard SPF0501199 Display board "Keyswitch display" Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality 1 Loop, 32 zone analogue addressable control and indicating equipment using Hochiki Protocol, metal housing Incorporating the following units: SPF0706000 Switch mode power supply board SPF0501212 XFP Hochiki 1 loop, main motherboard SPF0501200 Display board "Keypad display" Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality. 1 Loop, 32 zone analogue addressable control and indicating equipment using Hochiki Protocol, metal housing + Keyswitch Incorporating the following units: SPF0706000 Switch mode power supply board SPF0501212 XFP Hochiki 1 loop metal case, main motherboard SPF0501199 Display board "Keyswitch display" Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality. 1 Loop, 32 zone analogue addressable control and indicating equipment using Apollo Protocol, metal housing Incorporating the following units: SPF0706000 Switch mode power supply board SPF0501211 XFP Apollo 1 loop, main motherboard SPF0501200 Display board "keypad display" Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter LPCB Ref. No.
XFP501/H
176b/03
XFP501K/H
176b/03
XFP501/X
176b/04
12 Sep 2011
29
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality. 1 Loop, 32 zone analogue addressable control and indicating equipment using Apollo Protocol, metal housing Incorporating the following units: SPF0706000 Switch mode power supply board SPF0501211 XFP Apollo 1 loop, main motherboard SPF0501200 Display board "keypad display" Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality 1 Loop, 32 zone analogue addressable control and indicating equipment using Apollo Protocol, metal housing + Keyswitch Incorporating the following units: SPF0706000 Switch mode power supply board SPF0501211 XFP Apollo 1 loop, main motherboard SPF0501199 Display board "Keyswitch display" Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality 1 Loop, 32 zone analogue addressable control and indicating equipment using Apollo Protocol + Keyswitch, metal housing Incorporating the following units: SPF0706000 Switch mode power supply board SPF0501211 XFP Apollo 1 loop, main motherboard SPF0501199 Display board "Keyswitch display" Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality 1 Loop, 16 zone analogue addressable control and indicating equipment using Hochiki protocol, plastic housing Incorporating the following units: SPF0702480 Switch mode power supply board SPF0501102 XFP Hochiki 1 loop, main motherboard Certified with the following options with requirements from EN54-2: 1997 LPCB Ref. No.
XFP501/X/CON
176b/04
XFP501K/X
176b/04
XFP501K/X/CON
176b/04
XFP501E/H
176b/05
30
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.8 7.11 Output to fire alarm device(s) Delays to the actioning of outputs fire alarm devices and fire routing equipment Dependencies on more than one alarm signal - Type A Dependencies on more than one alarm signal - Type B Dependencies on more than one alarm signal - Type C Alarm counter Fault signals from points Disablement of each address point Test condition LPCB Ref. No.
XFP501EK/H
7.12.1 7.12.2 7.12.3 7.13 8.3 9.5 10 Notes: 1) Scope of approval does not include the operation of the network functionality 1 Loop, 16 zone analogue addressable control and indicating equipment using Hochiki protocol, plastic housing + Keyswitch Incorporating the following units: SPF0702480 Switch mode power supply board SPF1501102 XFP Hochiki 1 loop, main motherboard Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality 1 Loop, 16 zone analogue addressable control and indicating equipment using Apollo Protocol, plastic housing Incorporating the following units: SPF0702480 Switch mode power supply board SPF0501101 XFP Apollo 1 loop, main motherboard Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality 1 Loop, 16 zone analogue addressable control and indicating equipment using Apollo Protocol, plastic housing Incorporating the following units: SPF0702480 Switch mode power supply board SPF0501101 XFP Apollo 1 loop, main motherboard Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality 1 Loop, 16 zone analogue addressable control and indicating equipment using Apollo Protocol, plastic housing + Keyswitch Incorporating the following units:
176b/05
XFP501E/X
176b/06
XFP501E/X/CON
176b/06
XFP501EK/X
176b/06
12 Sep 2011
31
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products SPF0702480 Switch mode power supply board SPF1501101 XFP Apollo 1 loop, main motherboard Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality One Loop, 16 zone analogue addressable control and indicating equipment using Apollo Protocol, Plastic housing Incorporating the following units: SPF0702480 Switch mode power supply board SPF1501101 XFP Apollo 1 loop, Main motherboard Certified with the following options with requirements from EN54-2: 1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.12.3 Dependencies on more than one alarm signal - Type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Notes: 1) Scope of approval does not include the operation of the network functionality LPCB Ref. No.
XFP501KE/X/CON
176b/06
Certificate No: 176c to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006 and EN 12094-1: 2003 Certificated Products EP203 Conventional three zone class A extinguisher control panel Incorporating the following units: SPF0000203 SPF0000212 SPF0003613 SPF0000214 Incorporating as modular units: EP210S Remote Status Unit Surface Mount optional (See Note 1) EP211 Economy Status Unit optional (See Note 1) Certified with the following options with requirements from EN 12094-1:2003 4.17 Delay of extinguishing signal 4.18 Signal representing the flow of extinguishing agent 4.19 Monitoring of the status of components 4.20 Emergency hold device 4.21 Control of flooding time 4.23 Manual only mode 4.26 Triggering of equipment outside the system 4.27 Emergency abort device 4.30 Activation of alarm devices with different signals Certified with the following options with requirements from EN-54-2:1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing Main extinguisher control External relay interface Power supply unit EP214 terminator LPCB Ref. No. 176c/01
32
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products equipment 7.13 Alarm counter 10 Test condition Conventional three zone class A extinguisher control panel Incorporating the following units: SPF0000203 SPF0000212 SPF0003613 SPF0000214 Incorporating as modular units: EP210S Remote Status Unit Surface Mount optional (See Note 1) EP211 Economy Status Unit optional (See Note 1) Certified with the following options with requirements from EN 12094-1:2003 4.17 Delay of extinguishing signal 4.18 Signal representing the flow of extinguishing agent 4.19 Monitoring of the status of components 4.20 Emergency hold device 4.21 Control of flooding time 4.23 Manual only mode 4.26 Triggering of equipment outside the system 4.27 Emergency abort device 4.30 Activation of alarm devices with different signals Certified with the following options with requirements from EN-54-2:1997 7.8 Output to fire alarm device(s) 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.13 Alarm counter 10 Test condition Notes: 1) Optional Remote Status Unit part No. EP21OS & Economy Status Unit part No. EP211 are not certified as meeting the requirements of the standards specified. 2) Meets the requirements of EN12094-3:2003, Class A - i.e. operational temperature range of -5C to +40C. Main extinguisher control External relay interface Power supply unit EP214 terminator LPCB Ref. No.
EP203/CON
176c/01
Precept
018a/02
Precept
018a/03
Precept
018a/04
12 Sep 2011
33
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Precept C1426 Display Board 32 zone control and indicating equipment Incorporating as modular units C1425 Motherboard C1426 Display Board C1464 Display Board 2 zone control and indicating equipment Incorporating as modular units C1423 Motherboard C1440 Display Board 4 zone control and indicating equipment Incorporating as modular units C1423 Motherboard C1441 Display Board 8 zone control and indicating equipment Incorporating as modular units C1427 Motherboard C1462 Display Board 16 zone control and indicating equipment Incorporating as modular units C1425 Motherboard C1426 Display Board 32 zone control and indicating equipment Incorporating as modular units C1425 Motherboard C1426 Display Board C1464 Display Board Certificate Nos. 018a and 018c: Certified with the following options from EN 54 Part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition Certificate Nos. 018c/02-06: Certified with the following options from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition LPCB Ref. No. 018a/05
Series 600
018a/06
Series 600
018a/07
Series 600
018a/08
Series 600
018a/09
Series 600
018a/10
Certificate No: 018c to EN 54: Part 2 and 4: 1997 Certificated Products Discovery 4 loop analogue addressable control and indicating equipment Incorporating: A1579 Motherboard A1580 Display board A1585 Loop cards A1584 230 Vac power supply control card A1599 Printer board 2 zone conventional control and indicating equipment Incorporating as modular units:C1627 Mother board LPCB Ref. No. 018c/01
018c/02
34
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products C1628 Display board C1631 Repeater interface board (option) 4 zone conventional control and indicating equipment Incorporating as modular units:C1627 Mother board C1628 Display board C1631 Repeater interface board (option) 8 zone conventional control and indicating equipment Incorporating as modular units:C1627 Mother board C1628 Display board C1631 Repeater interface board (option) 16 zone conventional control and indicating equipment Incorporating as modular units:C1627 Mother board C1628 Display board C1631 Repeater interface board (option) 32 zone conventional control and indicating equipment Incorporating as modular units:C1627 Mother board C1629 Display board C1631 Repeater interface board (option) C1632 16 Zone Expansion board C1652 5A Power supply board 8 zone conventional repeater unit Incorporating as modular units:C1627 Mother board C1628 Display board C1631 Repeater interface board (option) 16 zone conventional repeater unit Incorporating as modular units:C1627 Mother board C1628 Display board C1631 Repeater interface board (option) 32 zone conventional repeater unit Incorporating as modular units:C1627 Mother board C1628 Display board C1631 Repeater interface board (option) Certificate Nos. 018a and 018c: Certified with the following options from EN 54 Part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition Certificate Nos. 018c/02-06: Certified with the following options from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition LPCB Ref. No. 018c/03
018c/04
018c/05
018c/06
018c/R01
018c/R02
018c/R03
12 Sep 2011
35
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
UK Sales: Tel: +44 (0)1594 541900 Fax: +44 (0)1594 541910 E-mail: sales@cooperfire.co.uk Website: www.cooperfire.co.uk
Certificate No: 714a to EN 54 Part 2 and 4 :1997 Certificated Products CF3000 Analogue addressable 2 and 4 loop Control and indicating equipment Incorporating the following units: ADF6 Assembled back box YPCB2153 Motherboard PCB YPCB2147 PSU PCB YPCB2148 2 Loop card (2 off) ADF6 Screen Touch Screen YPCB2185 Complete Display + Micro PCB ADF6DISPCOVER Display PCB Cover ADF6FACIA Front Moulding ADF6PRINTDOOR Printer Door Moulding BAT-NP12-12 Batteries (2 off) ADF6HINGE Door Hinges ADF6OPFACIA Optional Anti Tamper Cover ADF6PRINTER Printer YPCB2187 Fire Brigade Interface Certified with the following options from EN 54 Part 2: 7.8 Output to fire alarm device(s) 7.9 Output to fire alarm routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12 Coincidence detection 7.13 Alarm counter 8.9 Output to fault warning routing equipment 9.5 Disablement of each address point 10 Test condition Analogue addressable 2 and 4 loop control and indicating equipment Incorporating the following units: ADF6 Assembled back box YPCB2153 Motherboard PCB YPCB2147 PSU PCB YPCB2148 2 Loop card (2 off) ADF6Screen Touch Screen YPCB2185 Complete Display + Micro PCB ADF6DISPCOVER Display PCB Cover ADF6FACIA Front Moulding ADF6PRINTDOOR Printer Door Moulding BAT-NP12-12 Batteries (2 off) ADF6HINGE Door Hinges ADF6OPFACIA Optional Anti Tamper Cover ADF6PRINTER Printer YPCB2187 Fire Brigade Interface Certified with the following options from EN 54 Part 2: 7.8 Output to fire alarm device(s) 7.9 Output to fire alarm routing equipment LPCB Ref. No. 714a/01
DF6000
714a/01
36
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Output to automatic fire protection equipment Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12 Coincidence detection 7.13 Alarm counter 8.9 Output to fault warning routing equipment 9.5 Disablement of each address point 10 Test condition Analogue addressable 2 and 4 Loop control and indicating equipment Incorporating the following units: ADF6 Back Assembled back box YPCB2153 Motherboard PCB YPCB2147 PSU PCB YPCB2148 2 Loop Card (2 off) ADF6Screen Touch Screen YPCB2185 Complete Display + Micro PCB ADF6 DISPCOVER Display PCB Cover ADF6FACIA Front Moulding ADF6PRINTDOOR Printer Door Moulding BAT-NP12-12 Batteries (2 off) ADF6HINGE Door Hinges ADF6OPFACIA Optional Anti Tamper Cover ADF6PRINTER Printer YPCB2187 Fire Brigade Interface Certified with the following options from EN 54 Part 2: 7.8 Output to fire alarm device(s) 7.9 Output to fire alarm routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12 Coincidence detection 7.13 Alarm counter 8.9 Output to fault warning routing equipment 9.5 Disablement of each address point 10 Test condition Analogue addressable 2 Loop control and indicating equipment Incorporating the following units: PR202-50-2209 Power supply board PR202-50-2206 Main motherboard PR202-50-2205 Display board Certified with the following options from EN 54 Part 2: 7.8 Output to fire alarm device(s) 7.9 Output to fire alarm routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to the actioning of outputs fire alarm devices and fire routing equipment 7.12 Coincidence detection 7.13 Alarm counter 8.9 Output to fault warning routing equipment 9.5 Disablement of each address point 10 Test condition 7.10 7.11 LPCB Ref. No.
FX6000
714a/01
CF2000
714a/02
12 Sep 2011
37
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products YPCB2153 YPCB2147 YPCB2148 ADF6Screen YPCB2185 ADF6 DISPCOVER ADF6FACIA ADF6PRINTDOOR BAT-NP12-12 ADF6HINGE ADF6OPFACIA ADF6PRINTER YPCB2187 Motherboard PCB PSU PCB 2 Loop Card (2 off) Touch Screen Complete Display + Micro PCB Display PCB Cover Front Moulding Printer Door Moulding Batteries (2 off) Door Hinges Optional Anti Tamper Cover Printer Fire Brigade Interface LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm device(s) 7.9.1 Output to fire alarm routing equipment 7.10.1 Output to automatic fire protection equipment (Type A) 7.10.2 Output to automatic fire protection equipment (Type B) 7.11 Delays to outputs 7.12.3 Dependencies on more than one alarm signal (Type C) 7.13 Alarm counter 8.9 Output to fault warning routing equipment 9.5 Disablement of each address point 10 Test condition Notes: 1. 2. DF6000
The scope of approval does not include the network functionality. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 714h/01
Intelligent analogue addressable 2 and 4 loop control and indicating equipment Incorporating the following units: ADF6 Back YPCB2153 YPCB2147 YPCB2148 ADF6Screen YPCB2185 ADF6 DISPCOVER ADF6FACIA ADF6PRINTDOOR BAT-NP12-12 ADF6HINGE ADF6OPFACIA ADF6PRINTER YPCB2187 Assembled back box Motherboard PCB PSU PCB 2 Loop Card (2 off) Touch Screen Complete Display + Micro PCB Display PCB Cover Front Moulding Printer Door Moulding Batteries (2 off) Door Hinges Optional Anti Tamper Cover Printer Fire Brigade Interface
Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm device(s) 7.9.1 Output to fire alarm routing equipment 7.10.1 Output to automatic fire protection equipment (Type A) 7.10.2 Output to automatic fire protection equipment (Type B) 7.11 Delays to outputs 7.12.3 Dependencies on more than one alarm signal (Type C) 7.13 Alarm counter 8.9 Output to fault warning routing equipment 9.5 Disablement of each address point 10 Test condition Notes: 1. 2.
The scope of approval does not include the network functionality. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13.
38
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
EQ5400R
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.13 Alarm counter 8.3 Fault signals from points 10 Test condition Single loop eight zone addressable control and indicating equipment Incorporating as modular units: EQ3150 Controller Detection panel Routing panel EQ2220 (GFM) LTM EQ3730 (EDIO) and as optional modular units: EQ3710 (AIM) EQ3720 (RM) Model EQ22EM (IDCSC) Model EQ25EM (SAM) Model EQ24EM (NE) Model EQ24EM (PLR) EQ3810 (PDM) 750XCXH-24D Analogue Input Module Relay Module Initiating Device Circuit - Short Circuit Signal Audible Module Network Extender Physical Layer Repeater Power Distribution Module Magnecraft relay module Main controller Detection panel Routing panel Ground Fault Monitor Lon termination module Enhanced Discrete Input/Output (SIL only)
973c/02
EQ5400E
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 10 Test condition Single loop eight zone addressable control and indicating equipment and two
973d/01
12 Sep 2011
39
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products extinguishing zone class B electrical automatic control and delay devices Incorporating as modular units: EQ3150 Controller Detection panel Routing panel Extinguishing panel EQ2220 (GFM) LTM EQ3730 (EDIO) and as optional modular units: EQ3710 (AIM) EQ3720 (RM) Model EQ22EM (IDCSC) Model EQ25EM (SAM) Model EQ24EM (NE) Model EQ24EM (PLR) EQ3810 (PDM) 750XCXH-24D Analogue Input Module Relay Module Initiating Device Circuit - Short Circuit Signal Audible Module Network Extender Physical Layer Repeater Power Distribution Module Magnecraft relay module Main controller (Redundant) Detection panel Routing panel Extinguishing panel Ground Fault Monitor Lon termination module Enhanced Discrete Input/Output (SIL only) LPCB Ref. No.
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 10 Test condition Certified with the following options with requirements from EN 12094-1: 4.17 Delay of extinguishing signal 4.18 Signal representing the flow of extinguishing agent 4.19 Monitoring of the status of components 4.21 Control of flooding time 4.23 Manual only mode
40
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 505-0004 TWINFLEXpro, 4 Zone conventional control and indicating equipment Incorporating: 10-0067 Main Processor Card. Certified with the following options from EN 54 Part 2: 7.8 Output to fire alarm devices 7.10.1 Output type A to fire protection equipment 7.11 Delays to outputs 7.12.1 Type A dependency on more than one alarm signal 8.3 Fault signals from points 10 Test condition. TWINFLEXpro, 8 Zone conventional control and indicating equipment Incorporating: 10-0067 Main Processor Card 10-0087 4 Zone expansion card. Certified with the following options from EN 54 Part 2: 7.8 7.10.1 7.11 7.12.1 8.3 10 Output to fire alarm devices Output type A to fire protection equipment Delays to outputs Type A dependency on more than one alarm signal Fault signals from points Test condition. LPCB Ref. No. 331q/07
505-0008
331q/08
Firelite by Honeywell
Honeywell Life Safety Systems, Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United Kingdom Tel: +44 1444 230 300 Fax: +44 1444 230 888 E-mail: sales@morleyias.co.uk
Certificate No: 154g to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006 Certificated Products FLS2-8 2 Zone 002-475-122 Language region 1, light grey 002-489-122 Language region 1, light grey, English manual 002-475-222 Language region 2, light grey 002-489-222 Language region 2, light grey, English manual 002-475-142 Language region 1, light grey 002-489-142 Language region 1, light grey, English manual 002-475-242 Language region 2, light grey 002-489-242 Language region 2, light grey, English manual 002-475-182 Language region 1, light grey 002-489-182 Language region 1, light grey, English manual 002-475-282 Language region 2, light grey 002-489-282 Language region 2, light grey, English manual Incorporating the following units: 020-747 8-way relay kit 020-772 4-way monitored sounder kit LPCB Ref. No. 154g/06
FLS2-8 4 Zone
154g/07
FLS2-8 8 Zone
154g/08
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Output to automatic fire protection equipment: Type A 7.10.3 Output to automatic fire protection equipment: Type C 7.10.4 Fault monitoring of fire protection equipment 7.11.1 Delays to outputs 7.11.2 Manual or automatic switching of delays to outputs
12 Sep 2011
41
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
7.12.2 8.9 10 Dependency on more than one alarm signal: Type B Output to fault warning routing equipment Test condition
FX1
548j/02
FX2
548j/03
FX4
548j/04
FX8
548j/05
FX16
548j/06
42
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Gent By Honeywell
140 Waterside Road, Hamilton Industrial Park, Leicester LE5 1TN, United Kingdom Tel: +44 (0)116 246 2000 Fax: +44 (0)116 246 2300 E-mail: gent_enquiry@gent.co.uk Website: www.gent.co.uk Middle East Sales Enquiries E-mail: gent.export@honeywell.com
Certificate No: 042x to EN 54: Parts 2 & 4: 1997 Certificate No: 042bb to EN 54-2:1997 and EN 54-4: 1997 Certificate No: 042bc to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006 Certificated Products AS-2000 Two loop analogue addressable control and indicating equipment Incorporating as modular units: 2434-824 Power supply 2434-710 Loop Processor Card 2434-833 Master Control Card 2434-825 Optical Network Card* 2434-821 Message Store Card* 2434-822 Mother board 2434-835 H.M.I 2434-840 Cold fire card 2434-796 Addressable speaker card (Optional Card)* 2434-826 Addressable daughter speaker card (Optional Card)* 2434-780 Audio Input Card (Optional Card)* 2434-781 Audio Output Card (Optional Card)* Scope of approval does not include the functionality of the network card and optional voice alarm system cards) Certified with the following options from EN 54 Part 2: 1997 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Single loop analogue addressable control and indicating equipment Incorporating as modular units: 2434-881 Mother board 2434-862 Power supply 2434-887 H.M.I (Human Machine Interface) Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 10 Test condition Single loop analogue addressable control and indicating equipment (Spanish Language Variant) Incorporating as modular units: 2434-881 Mother board 2434-862 Power supply 2434-887 H.M.I (Human Machine Interface) Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 10 Test condition Single loop analogue addressable control and indicating equipment (Portuguese Language Variant) Incorporating as modular units: 2434-881 Mother board 2434-862 Power supply 2434-887 H.M.I (Human Machine Interface) LPCB Ref. No. 042bb/01
Nano-24
042bc/01
Nano-24-SP
042bc/02
Nano-24-PO
042bc/03
12 Sep 2011
43
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 10 Test condition Two loop analogue addressable control and indicating equipment (English language) Incorporating as modular units: 2434-859 Master Controller Board (MCB) 2434-862 Power Supply Unit 2434-762 Display and Key card (DKC) 2434-669 Loop processor card 4374-161 Text Membrane (English) 4374-162 Text Membrane (Spanish) 4374-163 Text Membrane (Portuguese) 2434-861 Copper network card (Note: Scope of approval does not include the operation of the network card) Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Two loop analogue addressable control and indicating equipment (Portuguese language variant) Incorporating as modular units: 2434-859 Master Controller Board (MCB) 2434-862 Power Supply Unit 2434-762 Display and Key card (DKC) 2434-669 Loop processor card 4374-161 Text Membrane (English) 4374-162 Text Membrane (Spanish) 4374-163 Text Membrane (Portuguese) 2434-861 Copper network card (Note: Scope of approval does not include the operation of the network card) Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition Two loop analogue addressable control and indicating equipment (Spanish language variant) Incorporating as modular units: 2434-859 Master Controller Board (MCB) 2434-862 Power Supply Unit 2434-762 Display and Key card (DKC) 2434-669 Loop processor card 4374-161 Text Membrane (English) 4374-162 Text Membrane (Spanish) 4374-163 Text Membrane (Portuguese) 2434-861 Copper network card (Note: Scope of approval does not include the operation of the network card) Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition One to Four loop analogue addressable control and indicating equipment (English language) Incorporating as modular units: 2434-863 Master controller card (M.C.C) 2434-710 Loop card 2434-831 Power supply PCB 2434-854 Backplane PCB 2434-861 Display and Key card (D.K.C) 2434-864 Terminal card 2434-565 Printer Module LPCB Ref. No.
Vigilon Compact-24-N
042bc/04
Vigilon Compact-24-PO
042bc/05
Vigilon Compact-24-SP
042bc/06
Vigilon VIG1-24
042bc/07
44
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 4374-157 Text Membrane (English) 4374-158 Text Membrane (Spanish) 4374-159 Text Membrane (Portuguese) 2434-674 Copper network card (Note: Scope of approval does not include the operation of the network card) Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition One to Four loop analogue addressable control and indicating equipment (English language variant without printer module) Incorporating as modular units: 2434-863 Master controller card (M.C.C) 2434-710 Loop card 2434-831 Power supply PCB 2434-854 Backplane PCB 2434-861 Display and Key card (D.K.C) 2434-864 Terminal card 2434-565 Printer Module 4374-157 Text Membrane (English) 4374-158 Text Membrane (Spanish) 4374-159 Text Membrane (Portuguese) 2434-674 Copper network card (Note: Scope of approval does not include the operation of the network card) Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition One to Four loop analogue addressable control and indicating equipment (Portuguese language variant without printer module) Incorporating as modular units: 2434-863 Master controller card (M.C.C) 2434-710 Loop card 2434-831 Power supply PCB 2434-854 Backplane PCB 2434-861 Display and Key card (D.K.C) 2434-864 Terminal card 2434-565 Printer Module 4374-157 Text Membrane (English) 4374-158 Text Membrane (Spanish) 4374-159 Text Membrane (Portuguese) 2434-674 Copper network card (Note: Scope of approval does not include the operation of the network card) Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition One to Four loop analogue addressable control and indicating equipment (Spanish language variant without printer module) Incorporating as modular units: 2434-863 Master controller card (M.C.C) 2434-710 Loop card 2434-831 Power supply PCB 2434-854 Backplane PCB 2434-861 Display and Key card (D.K.C) 2434-864 Terminal card 2434-565 Printer Module 4374-157 Text Membrane (English) 4374-158 Text Membrane (Spanish) 4374-159 Text Membrane (Portuguese) 2434-674 Copper network card (Note: Scope of approval does not include the operation of the network card) LPCB Ref. No.
Vigilon VIG1-24-NP
042bc/08
Vigilon VIG1-24-PO
042bc/09
Vigilon VIG1-24-SP
042bc/10
12 Sep 2011
45
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition One to Six loop analogue addressable control and indicating equipment (English Language) Incorporating as modular units: 2434-863 Master controller card (M.C.C) 2434-710 Loop card 2434-992 Thermistor board 2434-860 Battery terminal board 2434-832 Power supply PCB 2434-854 Backplane PCB 2434-761 Display and Key card (D.K.C) 2434-864 Terminal card 2434-565 Printer module 4374-157 Text Membrane (English) 4374-158 Text Membrane (Spanish) 4374-159 Text Membrane (Portuguese) 2434-674 Copper network card (Note: Scope of approval does not include the operation of the network card) Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition One to Six loop analogue addressable control and indicating equipment (Portuguese Language Variant without printer module) Incorporating as modular units: 2434-863 Master controller card (M.C.C) 2434-710 Loop card 2434-992 Thermistor board 2434-860 Battery terminal board 2434-832 Power supply PCB 2434-854 Backplane PCB 2434-761 Display and Key card (D.K.C) 2434-864 Terminal card 2434-565 Printer module 4374-157 Text Membrane (English) 4374-158 Text Membrane (Spanish) 4374-159 Text Membrane (Portuguese) 2434-674 Copper network card (Note: Scope of approval does not include the operation of the network card) Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition One to Six loop analogue addressable control and indicating equipment (Spanish Language Variant without printer module) Incorporating as modular units: 2434-863 Master controller card (M.C.C) 2434-710 Loop card 2434-992 Thermistor board 2434-860 Battery terminal board 2434-832 Power supply PCB 2434-854 Backplane PCB 2434-761 Display and Key card (D.K.C) 2434-864 Terminal card 2434-565 Printer module 4374-157 Text Membrane (English) 4374-158 Text Membrane (Spanish) 4374-159 Text Membrane (Portuguese) 2434-674 Copper network card (Note: Scope of approval does not include the operation of the network card) LPCB Ref. No.
Vigilon VIG1-72
042bc/11
Vigilon VIG1-72-PO
042bc/12
Vigilon VIG1-72-SP
042bc/13
46
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition 1 zone conventional control and indicating equipment Certified with the following options from EN 54 Part 2: 1997 7.8 Output to fire alarm devices 7.11 Delays of actioning to outputs to fire alarm routing equipment 10 Test condition 2 zone conventional control and indicating equipment Certified with the following options from EN 54 Part 2: 1997 7.8 Output to fire alarm devices 7.11 Delays of actioning to outputs to fire alarm routing equipment 10 Test condition 4 zone conventional control and indicating equipment Certified with the following options from EN 54 Part 2: 1997 7.8 Output to fire alarm devices 7.11 Delays of actioning to outputs to fire alarm routing equipment 10 Test condition 8 zone conventional control and indicating equipment Certified with the following options from EN 54 Part 2: 1997 7.8 Output to fire alarm devices 7.11 Delays of actioning to outputs to fire alarm routing equipment 10 Test condition LPCB Ref. No.
13270-01
042x/01
13270-02
042x/02
13270-04
042x/03
13270-08
042x/04
GST 101
548j/02
GST 102
548j/03
12 Sep 2011
47
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.8 Output to Fire Alarm Devices 10 Test condition Four zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.11 Delays to outputs 10 Test condition Eight zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.11 Delays to outputs 10 Test condition Sixteen zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.11 Delays to outputs 10 Test condition LPCB Ref. No. 548j/04
GST 104
GST 108
548j/05
GST 116
548j/06
Certificate No: 548p-(cl-1) to EN 54-2: 1997 + A1:2006 and EN 54-4: 1997 + A1:2002 + A2:2006 Certificated Products GST200-2 Intelligent 2 loop, 30 zone analogue addressable control and indicating equipment Incorporating the following units: F7.820.826 Main board F7.820.827 Switch board F7.820.828 Loop interface board F7.820.829b Power supply unit F7.908.312d Zone indication and intervention board F7.820.1125 Loop board Incorporating as optional modular units: F7.820.170 RS-232 board for configuration P-9901 Printer module kit Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.10.1 Output to automatic Fire Protection Equipment Type A 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of addressable points Intelligent 8 loop, 140 zone analogue addressable control and indicating equipment Incorporating the following units: F7.820.1238 Indication board F7.820.1239 Loop board F7.820.1311 Power board F7.820.1312 ZCP board F7.820.1326 Keypad board F7.820.1237 Main board F7.820.1310 Mother board Incorporating as optional modular units: F7.820.1313 USB communication board Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire routing equipment 7.9.2 Alarm confirmation input from fire routing equipment 7.10.1 Output type A 7.10.2 Output type B 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal - Type A 7.12.2 Dependencies on more than one alarm signal - Type B 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point LPCB Ref. No. 548p/01
GST-IFP8
548p/02
48
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products GST102A 10 Test condition 2 Zone conventional control and indicating equipment Incorporating the following modules: F7.843.399 Membrane F2.908.1719 Control board with integrated PSE F2.908.1722 Display board Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire routing equipment 7.11 Delays to outputs 10 Test condition 4 Zone conventional control and indicating equipment Incorporating the following modules: F7.843.400 Membrane F2.908.1718 Control board with integrated PSE F2.908.1721 Display board Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire routing equipment 7.11 Delays to outputs 10 Test condition 8 Zone conventional control and indicating equipment Incorporating the following modules: F7.843.401 Membrane F2.908.1675 Control board with integrated PSE F2.908.1720 Display board Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire routing equipment 7.11 Delays to outputs 10 Test condition 16 Zone conventional control and indicating equipment Incorporating the following modules: F7.843.402 Membrane F2.908.1724 Control board with integrated PSE F2.908.1676 Display board F7.820.1677 Expansion board Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire routing equipment 7.11 Delays to outputs 10 Test condition LPCB Ref. No. 548p/03
GST104A
548p/04
GST108A
548p/05
GST116A
548p/06
12 Sep 2011
49
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products F7.820.827 Switch board F7.820.828 Loop interface board F7.820.829 Power Supply unit F2.910.093 Mains filter R150 Transformer CGM12864 Alphanumeric Display F2.828.630a Printer board (option) Incorporating as optional modular units: P-9901 Printer module kit F7.820.170 RS232 board for configuration Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.10 Output to automatic Fire Protection Equipment 7.11 Delays to outputs 7.12 Coincidence detection 8.3 Fault signals from points 9.5 Disablement of addressable points Single zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 10 Test condition Two zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 10 Test condition Four zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.11 Delays to outputs 10 Test condition Eight zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.11 Delays to outputs 10 Test condition Sixteen zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.11 Delays to outputs 10 Test condition Intelligent 2 loop, 30 zone analogue addressable control and indicating equipment Incorporating the following units: F7.820.826 Main board F7.820.827 Switch board F7.820.828 Loop interface board F7.820.829b Power supply unit F7.908.312d Zone indication and intervention board F7.820.1125 Loop board Incorporating as optional modular units: F7.820.170 RS-232 board for configuration P-9901 Printer module kit LPCB Ref. No.
GS101
548j/02
GS102
548j/03
GS104
548j/04
GS108
548j/05
GS116
548j/06
GS200-2
548p/01
GSIFP8
Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.10.1 Output to automatic Fire Protection Equipment Type A 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of addressable points Intelligent 8 loop, 140 zone analogue addressable control and indicating equipment Incorporating the following units: F7.820.1238 Indication board F7.820.1239 Loop board F7.820.1311 Power board F7.820.1312 ZCP board F7.820.1326 Keypad board F7.820.1237 Main board
548p/02
50
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products F7.820.1310 Mother board LPCB Ref. No. Incorporating as optional modular units: F7.820.1313 USB communication board Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire routing equipment 7.9.2 Alarm confirmation input from fire routing equipment 7.10.1 Output type A 7.10.2 Output type B 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal Type A 7.12.2 Dependencies on more than one alarm signal Type B 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition
Gulf Security Technology Co. Ltd (Manufacturing Division of Global System Technology PLC)
No. 80 Changjiang East Road, Economic & Technological Development Zone, Qinhuangdao, Hebei Province 066004, China Tel: +86 0335 8502528 Fax: +86 0335 8508942 E-mail: gst@gst.com.cn Website: www.gst.com.cn Sales Beijing: Tel: +86 (10) 6439 1866 Fax: +86 (10) 6439 1787
Sales Hong Kong: Tel: +852 2877 8566 Fax: +852 2511 8699
Certificate No: 548j to EN 54-2: 1997 & EN54-4: 1997 Certificated Products GST-200 Intelligent 1 loop, 30 zone, analogue addressable control and indicating equipment Incorporating the following units: F7.820.826 Main board F7.908.312 Zone indication board F7.820.827 Switch board F7.820.828 Loop interface board F7.820.829 Power Supply unit F2.910.093 Mains filter R150 Transformer CGM12864 Alphanumeric Display F2.828.630a Printer board (option) Incorporating as optional modular units: P-9901 Printer module kit F7.820.170 RS232 board for configuration Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.10 Output to automatic Fire Protection Equipment 7.11 Delays to outputs 7.12 Coincidence detection 8.3 Fault signals from points 9.5 Disablement of addressable points Single zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: LPCB Ref. No. 548j/01
GST 101
548j/02
12 Sep 2011
51
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.8 Output to Fire Alarm Devices 10 Test condition Two zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 10 Test condition Four zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.11 Delays to outputs 10 Test condition Eight zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.11 Delays to outputs 10 Test condition Sixteen zone conventional control and indicating equipment Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.11 Delays to outputs 10 Test condition LPCB Ref. No. 548j/03
GST 102
GST 104
548j/04
GST 108
548j/08
GST 116
548j/09
Certificate No: 548p to EN 54-2: 1997 + A1:2006 and EN 54-4: 1997 + A1:2002 + A2:2006 Certificated Products GST200-2 Intelligent 2 loop, 30 zone analogue addressable control and indicating equipment Incorporating the following units: F7.820.826 Main board F7.820.827 Switch board F7.820.828 Loop interface board F7.820.829b Power supply unit F7.908.312d Zone indication and intervention board F7.820.1125 Loop board Incorporating as optional modular units: F7.820.170 RS-232 board for configuration P-9901 Printer module kit Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.10.1 Output to automatic Fire Protection Equipment Type A 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of addressable points Intelligent 8 loop, 140 zone analogue addressable control and indicating equipment Incorporating the following units: F7.820.1238 Indication board F7.820.1239 Loop board F7.820.1311 Power board F7.820.1312 ZCP board F7.820.1326 Keypad board F7.820.1237 Main board F7.820.1310 Mother board Incorporating as optional modular units: F7.820.1313 USB communication board Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire routing equipment 7.9.2 Alarm confirmation input from fire routing equipment 7.10.1 Output type A 7.10.2 Output type B 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal - Type A LPCB Ref. No. 548p/01
GST-IFP8
548p/02
52
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.12.2 Dependencies on more than one alarm signal - Type B 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition 2 Zone conventional control and indicating equipment Incorporating the following modules: F7.843.399 Membrane F2.908.1719 Control board with integrated PSE F2.908.1722 Display board Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire routing equipment 7.11 Delays to outputs 10 Test condition 4 Zone conventional control and indicating equipment Incorporating the following modules: F7.843.400 Membrane F2.908.1718 Control board with integrated PSE F2.908.1721 Display board Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire routing equipment 7.11 Delays to outputs 10 Test condition LPCB Ref. No.
GST102A
548p/03
GST104A
548p/04
FBUL X-Y-Z
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.11 Delays to outputs 9.5 Disablement of each addressable point 10 Test condition 1 to 8 Loop analogue addressable and/or 4-36 zone conventional control and indicating equipment Incorporating as modular units:
810a/02
12 Sep 2011
53
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products FSB17 Main Display PCB FSB10 Expander PCB PSUFUSION-5A 5A Power Supply Control PCB PSULS150-36 36V 150W Lambda Power supply Module Cabinet size 750H x 470W x 140D mm and as optional modules: FSB18 FSB11 FSB10-E FSB12-32 FSB12-64 4 Way Conventional zone PCB 1 Loop Card Apollo protocol Bank Extender PCB 16 Way expansion LED PCB 48 Way expansion LED PCB LPCB Ref. No.
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.11 Delays to outputs 9.5 Disablement of each addressable point 10 Test condition Note: 1. 2. Model name suffix X denote the LED display module type, Y denote the number of conventional zones and Z denote the number of loops. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13.
54
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 020-479 020-648 020-579 Interface) 020-548 020-543 020-773 020-877 020-643 020-647-100 Panel RS485 Interface PSU3A PSU7A, (Requires Dual Transmission Path / Booster, PSU PSU7A Status Indication Dual Transmission Path / Booster, PSU Interface Routing Termination Unit (DEOL) Extinguishing Interface Module M221-SI XLS80e-NI Fibre Optic Interface Kit XLS80e-NI Network Gateway Module, (NGM) for use in XLS80e LPCB Ref. No.
Certified with the following options with requirements: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Output to fire protection equipment type A 7.10.3 Output to fire protection equipment type C 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.2 Dependency on more than one alarm signal type B 7.12.3 Dependency on more than one alarm signal type C 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablements of addressable points 10 Test condition Note 1: Products are available in language variants as follows: Group 1: English, Spanish, Portuguese, Icelandic and Italian Group 3: English, Swedish, Danish, Norwegian and Finish Group 4: English, Czech and Polish Group 5: English and Cyrillic XLS80e-2L Note 2: Fixed build products incorporate a corresponding Basic Equipment Kit. Fixed build 2 loop analogue addressable control and indicating equipment. 020-692 XLS80e-2L-1, 2 Loop, PSU3A, Group 1 020-692-103 XLS80e-2L-3, 2 Loop, PSU3A, Group 3 020-692-104 XLS80e-2L-4, 2 Loop, PSU3A, Group 4 020-692-105 XLS80e-2L-5, 2 Loop, PSU3A, Group 5 Incorporating the following as modular units: Enclosures: 020-040-002 Cover Kit Extended Moulded, Light / Grey 020-472-002 Backbox Kit Standard, Light Grey 020-473-002 Backbox Kit Extended, Light Grey 020-474-002 Backbox Kit Extended Deep, Light Grey 020-475-002 Backbox Kit Double Extended, Light Grey 020-476-002 Backbox Kit Double Extended Deep, Light Grey 020-480-102 Main Cover Kit, Light / Grey 020-481-002 Extension Cover Kit, Light / Grey 020-509-002 Backbox Extension Deep Assembly Light / Grey 020-621-002 256 Zone Extension Cover, Light / Grey 020-541-102 PSU7A / 78Ah Battery Enclosure Modules: 020-708-100 Extension Chassis with Printer Kit 020-644-009 Printer Assembly 020-559-101 Zone Extension Chassis Kit 1-64 Zone C/W Display Module 020-559-102 Zone Extension Chassis Kit 65-128 Zone C/W Display Module 020-612-100 Double Extended Chassis Kit 256 Zone 020-708-009 Extension Chassis with Printer 020-644-009 Printer Assembly 020-588-100 Honeywell Dual Loop Interface Board, (LIB) 020-549-100 Honeywell Dual Enhanced Loop Interface Board, (ELIB) 020-478 RS232 Interface 020-479 RS485 Interface 020-648 PSU3A 020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSU Interface) 020-548 PSU7A Status Indication 020-543 Dual Transmission Path / Booster, PSU Interface 020-773 Routing Termination Unit (DEOL) 020-877 Extinguishing Interface Module M221-SI 154g/01
12 Sep 2011
55
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 020-643 020-647-100 Panel XLS80e-NI Fibre Optic Interface Kit XLS80e-NI Network Gateway Module, (NGM) for use in XLS80e LPCB Ref. No.
Certified with the following options with requirements: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Output to fire protection equipment type A 7.10.3 Output to fire protection equipment type C 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.2 Dependency on more than one alarm signal type B 7.12.3 Dependency on more than one alarm signal type C 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablements of addressable points 10 Test condition Note 1: Products are available in language variants as follows: Group 1: English, Spanish, Portuguese, Icelandic and Italian Group 3: English, Swedish, Danish, Norwegian and Finish Group 4: English, Czech and Polish Group 5: English and Cyrillic XLS80e-4L Note 2: Fixed build products incorporate a corresponding Basic Equipment Kit. Fixed build 4 loop analogue addressable control and indicating equipment. 020-693 XLS80e-4L-1, 4 Loop, PSU3A, Group 1 020-693-103 XLS80e-4L-3, 4 Loop, PSU3A, Group 3 020-693-104 XLS80e-4L-4, 4 Loop, PSU3A, Group 4 020-693-105 XLS80e-4L-5, 4 Loop, PSU3A, Group 5 Incorporating the following as modular units: Enclosures: 020-040-002 Cover Kit Extended Moulded, Light / Grey 020-472-002 Backbox Kit Standard, Light Grey 020-473-002 Backbox Kit Extended, Light Grey 020-474-002 Backbox Kit Extended Deep, Light Grey 020-475-002 Backbox Kit Double Extended, Light Grey 020-476-002 Backbox Kit Double Extended Deep, Light Grey 020-480-102 Main Cover Kit, Light / Grey 020-481-002 Extension Cover Kit, Light / Grey 020-509-002 Backbox Extension Deep Assembly Light / Grey 020-621-002 256 Zone Extension Cover, Light / Grey 020-541-102 PSU7A / 78Ah Battery Enclosure Modules: 020-708-100 Extension Chassis with Printer Kit 020-644-009 Printer Assembly 020-559-101 Zone Extension Chassis Kit 1-64 Zone C/W Display Module 020-559-102 Zone Extension Chassis Kit 65-128 Zone C/W Display Module 020-612-100 Double Extended Chassis Kit 256 Zone 020-708-009 Extension Chassis with Printer 020-644-009 Printer Assembly 020-588-100 Honeywell Dual Loop Interface Board, (LIB) 020-549-100 Honeywell Dual Enhanced Loop Interface Board, (ELIB) 020-478 RS232 Interface 020-479 RS485 Interface 020-648 PSU3A 020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSU Interface) 020-548 PSU7A Status Indication 020-543 Dual Transmission Path / Booster, PSU Interface 020-773 Routing Termination Unit (DEOL) 020-877 Extinguishing Interface Module M221-SI 020-643 XLS80e-NI Fibre Optic Interface Kit 020-647-100 XLS80e-NI Network Gateway Module, (NGM) for use in XLS80e Panel Certified with the following options with requirements: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 154g/01
56
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.10.1 Output to fire protection equipment type A 7.10.3 Output to fire protection equipment type C 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.2 Dependency on more than one alarm signal type B 7.12.3 Dependency on more than one alarm signal type C 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablements of addressable points 10 Test condition Note 1: Products are available in language variants as follows: Group 1: English, Spanish, Portuguese, Icelandic and Italian Group 3: English, Swedish, Danish, Norwegian and Finish Group 4: English, Czech and Polish Group 5: English and Cyrillic XLS80e-6L Note 2: Fixed build products incorporate a corresponding Basic Equipment Kit. Fixed build 6 loop analogue addressable control and indicating equipment. 020-694 XLS80e-6L-1, 6 Loop, PSU7A, Group 1 020-694-103 XLS80e-6L-3, 6 Loop, PSU7A, Group 3 020-694-104 XLS80e-6L-4, 6 Loop, PSU7A, Group 4 020-694-105 XLS80e-6L-5, 6 Loop, PSU7A, Group 5 Incorporating the following as modular units: Enclosures: 020-040-002 Cover Kit Extended Moulded, Light / Grey 020-472-002 Backbox Kit Standard, Light Grey 020-473-002 Backbox Kit Extended, Light Grey 020-474-002 Backbox Kit Extended Deep, Light Grey 020-475-002 Backbox Kit Double Extended, Light Grey 020-476-002 Backbox Kit Double Extended Deep, Light Grey 020-480-102 Main Cover Kit, Light / Grey 020-481-002 Extension Cover Kit, Light / Grey 020-509-002 Backbox Extension Deep Assembly Light / Grey 020-621-002 256 Zone Extension Cover, Light / Grey 020-541-102 PSU7A / 78Ah Battery Enclosure Modules: 020-708-100 Extension Chassis with Printer Kit 020-644-009 Printer Assembly 020-559-101 Zone Extension Chassis Kit 1-64 Zone C/W Display Module 020-559-102 Zone Extension Chassis Kit 65-128 Zone C/W Display Module 020-612-100 Double Extended Chassis Kit 256 Zone 020-708-009 Extension Chassis with Printer 020-644-009 Printer Assembly 020-588-100 Honeywell Dual Loop Interface Board, (LIB) 020-549-100 Honeywell Dual Enhanced Loop Interface Board, (ELIB) 020-478 RS232 Interface 020-479 RS485 Interface 020-648 PSU3A 020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSU Interface) 020-548 PSU7A Status Indication 020-543 Dual Transmission Path / Booster, PSU Interface 020-773 Routing Termination Unit (DEOL) 020-877 Extinguishing Interface Module M221-SI 020-643 XLS80e-NI Fibre Optic Interface Kit 020-647-100 XLS80e-NI Network Gateway Module, (NGM) for use in XLS80e Panel Certified with the following options with requirements: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Output to fire protection equipment type A 7.10.3 Output to fire protection equipment type C 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.2 Dependency on more than one alarm signal type B 7.12.3 Dependency on more than one alarm signal type C 7.13 Alarm counter 8.3 Fault signals from points 154g/01 LPCB Ref. No.
12 Sep 2011
57
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 8.9 Output to fault warning routing equipment 9.5 Disablements of addressable points 10 Test condition Note 1: Products are available in language variants as follows: Group 1: English, Spanish, Portuguese, Icelandic and Italian Group 3: English, Swedish, Danish, Norwegian and Finish Group 4: English, Czech and Polish Group 5: English and Cyrillic XLS80e-8L Note 2: Fixed build products incorporate a corresponding Basic Equipment Kit. Fixed build 8 loop analogue addressable control and indicating equipment. 020-695 XLS80e-8L-1, 8 Loop, PSU7A, Group 1 020-695-103 XLS80e-8L-3, 8 Loop, PSU7A, Group 3 020-695-104 XLS80e-8L-4, 8 Loop, PSU7A, Group 4 020-695-105 XLS80e-8L-5, 8 Loop, PSU7A, Group 5 Incorporating the following as modular units: Enclosures: 020-040-002 Cover Kit Extended Moulded, Light / Grey 020-472-002 Backbox Kit Standard, Light Grey 020-473-002 Backbox Kit Extended, Light Grey 020-474-002 Backbox Kit Extended Deep, Light Grey 020-475-002 Backbox Kit Double Extended, Light Grey 020-476-002 Backbox Kit Double Extended Deep, Light Grey 020-480-102 Main Cover Kit, Light / Grey 020-481-002 Extension Cover Kit, Light / Grey 020-509-002 Backbox Extension Deep Assembly Light / Grey 020-621-002 256 Zone Extension Cover, Light / Grey 020-541-102 PSU7A / 78Ah Battery Enclosure Modules: 020-708-100 Extension Chassis with Printer Kit 020-644-009 Printer Assembly 020-559-101 Zone Extension Chassis Kit 1-64 Zone C/W Display Module 020-559-102 Zone Extension Chassis Kit 65-128 Zone C/W Display Module 020-612-100 Double Extended Chassis Kit 256 Zone 020-708-009 Extension Chassis with Printer 020-644-009 Printer Assembly 020-588-100 Honeywell Dual Loop Interface Board, (LIB) 020-549-100 Honeywell Dual Enhanced Loop Interface Board, (ELIB) 020-478 RS232 Interface 020-479 RS485 Interface 020-648 PSU3A 020-579 PSU7A, (Requires Dual Transmission Path / Booster, PSU Interface) 020-548 PSU7A Status Indication 020-543 Dual Transmission Path / Booster, PSU Interface 020-773 Routing Termination Unit (DEOL) 020-877 Extinguishing Interface Module M221-SI 020-643 XLS80e-NI Fibre Optic Interface Kit 020-647-100 XLS80e-NI Network Gateway Module, (NGM) for use in XLS80e Panel Certified with the following options with requirements: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Output to fire protection equipment type A 7.10.3 Output to fire protection equipment type C 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.2 Dependency on more than one alarm signal type B 7.12.3 Dependency on more than one alarm signal type C 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablements of addressable points 10 Test condition Note 1: Products are available in language variants as follows: Group 1: English, Spanish, Portuguese, Icelandic and Italian Group 3: English, Swedish, Danish, Norwegian and Finish Group 4: English, Czech and Polish Group 5: English and Cyrillic 154g/01 LPCB Ref. No.
58
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products LPCB Ref. No. Note 2: Fixed build products incorporate a corresponding Basic Equipment Kit. 002-467-002 Network Gateway Unit, (NGU) Honeywell Protocol Incorporating the following as modular units: 020-643 XLS80e- NI Fibre Optic Interface Kit 020-647-100 XLS80e-NI Network Gateway Module, (NGM) for use in XLS80e Panel 020-648 PSU3A Note 1: Products are available in language variants as follows: Group 1: English, Spanish, Portuguese, Icelandic and Italian Group 3: English, Swedish, Danish, Norwegian and Finish Group 4: English, Czech and Polish Group 5: English and Cyrillic Note 2: Fixed build products incorporate a corresponding Basic Equipment Kit. 154g/NO1
XLS80e-NI
12 Sep 2011
59
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 3-24Y 24, Yellow 3-24G 24, Green 3-12RY Red-over-yellow pairs 3-12SR 12 Switches. Red 3-12SY 12 Switches. Yellow 3-12SG 12 Switches. Green 3-12/S1GY 12 Switches. Green over-yellow pairs 3-12/S1RY 12 Switches. Red over-yellow pairs 3-12/S2Y 24, Yellow, 12 Switches 3-12/S2R 24, Red, 12 Switches 3-6/3S1G2Y Green-over-yellow-over-yellow triads, 6 triads 3-6/3S1GYR Green-over-yellow-over-red triads, 6 triads 3-6/3S2RY Red-over-yellow-over-red triads, 6 triads 3-BBCMON Booster, Battery Charger Monitor 3-BPSMON Booster Power supply Monitor 3-LDSM Annunciator strip support module 3-LRMF Local Rail Module Filler 3-FTCU MB Fire fighter Telephone Control Unit MB 3-FTCU-E Fire fighter Telephone Control Unit Display 3-REMICP Remote Microphone, Panel 3-RCIC ASU Interconnect power and rail communication unit Repeater Incorporating as modular units: 3-RS485BA Remote Annunciator RS485 Communications. 3-ANNCPU3 Remote Annunciator CPU 3-LCDANN-E LCD Display and User Interface for Remote Annunciator 3-ANNSM Remote (repeater) Annunciator Support Module 3-REMICA Remote paging Microphone 3-24Y 24, Yellow 3-12/S1GY 12 Switches. Green over-yellow pairs 3-6ANN-E(R) Remote Annunciator Back Box, 6 slots, with Door (R) indicates red 3-10ANN-E(R) Remote Annunciator Back Box, 10 slots, with Door (R) indicates red Certified with the following options with requirements from EN 54 Part 2: 7.8 7.13 8.3 10 Output to fire alarm devices Alarm counter Fault Signals from points Test condition LPCB Ref. No.
XLS1000
262v/01
60
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products ZX5e 1-5 loop analogue addressable control and indicating equipment Incorporating the following units: 124-206 Processor card 124-327 ZX2/5e 20 zone display 124-205-002 3A PSU 124-330-001 60 zone extender 124-354 5 loop base card 124-231 Apollo Discovery loop driver card 124-195 Hochiki loop driver 124-249-003 Morley IAS loop driver card The ZX model range Certified with the following options with requirements from EN 54 part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12 Coincidence detection 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition 1-2 loop analogue addressable control and indicating equipment Incorporating the following units: 124-206 Processor card 124-231 Apollo Discovery loop driver card 124-195 Hochiki loop driver card 124-329 320b/380b 20 zone display 124-207-003 2A PSU 124-209-002 2 loop base card 124-196 230V filter card 1-5 loop analogue addressable control and indicating equipment Incorporating the following units: 124-206 Processor card 124-205-002 3A PSU 124-330-001 60 zone extender 124-354 5 loop base card 124-231 Apollo Discovery loop driver card 124-195 Hochiki loop driver card 124-329 320B/380B 20 zone display The 3xxx model range Certified with the following options with requirements from EN 54 part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12 Coincidence detection 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition DX1e-40M 1 loop, 40 zone, analogue addressable control indicating equipment Incorporating the following units: 124-336 Loop base card 124-335 Display card 124-337 Printer module (DX1e-40MP only) Note: The CIE is compatible with Apollo, Hochiki and System sensor protocols 1 loop 20 zone, analogue addressable control indicating equipment. Incorporating the following units: 124-336 Loop base card 124-335 Display card Note: The CIE is compatible with Apollo, Hochiki and System sensor protocols 2 loop, 40 zone, analogue addressable control indicating equipment Incorporating the following units: 124-344 Loop base card 124-335 Display card 124-337 Printer module (DX2e-40MP and DX2e-40LP only) Note: The CIE is compatible with Morley protocol 2 loop, 40 zone, analogue addressable control indicating equipment Incorporating the following units: 124-344 Loop base card 124-335 Display card 124-337 Printer module (DX2e-40MP and DX2e-40LP only) Note: The CIE is compatible with Apollo, Hochiki and System sensor protocols 4 loop, 40 zone, analogue addressable control indicating equipment 429a/07 LPCB Ref. No. 429a/02
320b
429a/05
380b
429a/06
DXIe-206
429a/07
DX2e-40L-M
429a/08
DX2e-40M
429a/08
DX4e-40L
429a/09
12 Sep 2011
61
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Incorporating the following units: 124-344 Loop base card 124-351 Two loop plug in cards 124-335 Display card 124-337 Printer module (DX4e-40LP only) Note: The CIE is compatible with Apollo, Hochiki and System sensor protocols The DX model range Certified with the following options with requirements from EN 54 part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12 Coincidence detection 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition All of the above are certified with the following options with requirements from EN 54: Part 2 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12 Coincidence detection 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition Certificate No: 154d to EN 54:Part 2 and 4: 1997 Certificated Products Horizon HRZ2-8 Horizon HRZ2-8 Horizon HRZ2-8 HRZ2-8 002-479-322 Morley-IAS Horizon, 2 zone, dual relay, Danish, Finish, Norwegian, Swedish (Region 3) 002-492-222 Morley-IAS Horizon, 2 zone, 2w relay, English, French, Spanish, Portuguese, Italian (Region 2) + UK user manual 002-506-222 Morley-IAS Horizon, 2 zone, English, French, Spanish, Portuguese, Italian (Region 2) + UK user manual Horizon 2 Zone conventional control and indicating equipment Including the following versions: 002-479-122 Language region 1, English manual 002-479-222 Language region 2 002-479-322 Language region 3, dual relay 002-492-222 Language region 2, dual relay, English manual 002-506-222 Language region 2, English manual 002-479-342 Morley-IAS Horizon, 4 zone, dual relay, Danish, Finish, Norwegian, Swedish (Region 3) 002-492-242 Morley-IAS Horizon, 4 zone, 2w relay, English, French, Spanish, Portuguese, Italian (Region 2) + UK user manual 002-506-242 Morley-IAS Horizon, 4 zone, English, French, Spanish, Portuguese, Italian (Region 2) + UK user manual Horizon 4 zone conventional control and indicating equipment Including the following versions: 002-479-142 Language region 1, English manual 002-479-242 Language region 2 002-479-342 Language region 3, dual relay 002-492-242 Language region 2, dual relay, English manual 002-506-242 Language region 2, English manual 002-479-382 Morley-IAS Horizon, 8 zone, dual relay, Danish, Finish, Norwegian, Swedish (Region 3) 002-492-282 Morley-IAS Horizon, 8 zone, 2w relay, English, French, Spanish, Portuguese, Italian (Region 2) + UK user manual 002-506-282 Morley-IAS Horizon, 8 zone, English, French, Spanish, Portuguese, Italian (Region 2) + UK user manual Horizon 8 zone conventional control and indicating equipment Including the following versions: 002-479-182 002-479-282 002-479-382 002-492-282 002-506-242 Language region 1, English manual Language region 2 Language region 3, dual relay Language region 2, dual relay, English manual Language region 2, English manual LPCB Ref. No. 154d/09 154d/09 154d/09 154d/09 LPCB Ref. No.
62
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products The HRZ model range Certified with the following options with requirements from EN 54 part 2: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.11 Delays to outputs 7.12 Coincidence detection 10 Test condition LPCB Ref. No.
Certified with the following options from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.11 Delays to outputs 7.12 Coincidence detection 10 Test condition
Certificate No: 429b to EN 54-2: 1997 and EN 54-4: 1997 Certificated Products HRZ2-8 Horizon 2 Zone conventional control and indicating equipment Including the following versions: 002-479-122 Language region 1, English manual 002-479-222 Language region 2 002-479-322 Language region 3, dual relay 002-492-222 Language region 2, dual relay, English manual 002-506-222 Language region 2, English manual Horizon 4 Zone conventional control and indicating equipment Including the following versions: 002-479-142 Language region 1, English manual 002-479-242 Language region 2 002-479-342 Language region 3, dual relay 002-492-242 Language region 2, dual relay, English manual 002-506-242 Language region 2, English manual Horizon 8 Zone conventional control and indicating equipment Including the following versions: 002-479-182 Language region 1, English manual 002-479-282 Language region 2 002-479-382 Language region 3, dual relay 002-492-282 Language region 2, dual relay, English manual 002-506-282 Language region 2, English manual LPCB Ref. No. 154d/09
HRZ4-8
154d/10
HRZ8-8
154d/11
Certified with the following options from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.11 Delays to outputs 7.12 Coincidence detection 10 Test condition Certificate No: 429c to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006 Certificated Products DX1e-20S DX1e-20S-M DX1e-40M DX1e-40M-M 1 loop, 20 zone, analogue addressable control indicating equipment Note: The CIE is compatible with Apollo, Hochiki and System Sensor protocols 1 loop, 20 zone, analogue addressable control indicating equipment English, Spanish and Italian language versions Note: The CIE is compatible with Morley protocol 1 loop, 40 zone, analogue addressable control indicating equipment Note: The CIE is compatible with Apollo, Hochiki and System Sensor protocols 1 loop, 40 zone, analogue addressable control indicating equipment English, Spanish and Italian language versions Note: The CIE is compatible with Morley protocol LPCB Ref. No. 429c/01 429c/01 429c/01 429c/01
12 Sep 2011
63
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products LPCB Ref. No. Incorporating the following units: 124-386 Base card 124-335-001 Display card Certified with the following options with requirements from EN 54 part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12.3 Dependency on more than one alarm signal: Type C 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition 2 loop, 40 zone, analogue addressable control indicating equipment Note: The CIE is compatible with Apollo, Hochiki and System Sensor protocols 2 loop, 40 zone, analogue addressable control indicating equipment English, Spanish and Italian language versions Note: The CIE is compatible with Morley protocol Incorporating the following units: 124-392 124-393 124-335 -001 Base card 2 loop interface board Display card
DX2e-40M DX2e-40M-M
429c/02 429c/02
DX4e-40L DX4e-40L-M
Certified with the following options with requirements from EN 54 part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12.3 Dependency on more than one alarm signal: Type C 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition 4 loop, 40 zone, analogue addressable control indicating equipment Note: The CIE is compatible with Apollo, Hochiki and System Sensor protocols 4 loop, 40 zone, analogue addressable control indicating equipment English, Spanish and Italian language versions Note: The CIE is compatible with Morley protocol Incorporating the following units: 124-392 124-393 124-335 -001 Base card 2 loop interface board Display card
429c/03 429c/03
ZX1Se
Certified with the following options with requirements from EN 54 part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12.3 Dependency on more than one alarm signal: Type C 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition 1 loop analogue addressable control and indicating equipment 722-001-301 1 loop multi-protocol control panel, language group M100 722-001-302 1 loop multi-protocol control panel, language group M200 722-002-301 1 loop multi-protocol control panel, language group M100, Stainless Steel 722-101-301 1 loop multi-protocol control panel, language group H100 722-101-302 1 loop multi-protocol control panel, language group H200 Incorporating the following units: 795-072-100 795-068-100 795-058-105 795-066-100 795-044-001 795-004-001 795-005 124-206 124-209-005 124-370 Morley-IAS Loop Driver Card System Sensor Loop Driver Card Hochiki Loop Driver Card Apollo XP95 / Discovery Loop Driver Card Nittan Loop Driver Card RS 485 Communication Module RS232 Communication Module Processor Card 1 Loop Base Card 4 Line Display Card
429c/04
64
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products PS82-2-NFR 2A PSU LPCB Ref. No.
ZX2Se
Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12. Dependency on more than one alarm signal: Type C 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition 1-2 loop analogue addressable control and indicating equipment 1-2 loop multi-protocol control panel, language group M100 1-2 loop multi-protocol control panel, language group M200 1-2 loop multi-protocol control panel, language group M100, Stainless Steel 720-101-301 1-2 loop multi-protocol control panel, language group H100 720-101-302 1-2 loop multi-protocol control panel, language group H200 Incorporating the following units: 795-072-100 795-068-100 795-058-105 795-066-100 795-044-001 795-004-001 795-005 124-206 124-209-004 124-370 4 PS82-2-NFR Morley-IAS Loop Driver Card System Sensor Loop Driver Card Hochiki Loop Driver Card Apollo XP95 / Discovery Loop Driver Card Nittan Loop Driver Card RS 485 Communication Module RS232 Communication Module Processor Card 2 Loop Base Card Line Display Card 2A PSU 720-001-301 720-001-302 720-002-301
429c/05
ZX5Se
Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12.3 Dependency on more than one alarm signal: Type C 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition 1-5 loop analogue addressable control and indicating equipment 1-5 loop multi-protocol control panel, language group M100 1-5 loop multi-protocol control panel, language group M200 1-5 loop multi-protocol control panel, language group M100, Stainless Steel 721-101-301 1-5 loop multi-protocol control panel, language group H100 721-101-302 1-5 loop multi-protocol control panel, language group H200 Incorporating the following units: 795-072-100 795-068-100 795-058-105 795-066-100 795-044-001 795-004-001 795-005 795-077-020 795-077-060 795-051-001 124-206 124-403 124-370 4 PS196-4-NFR Morley-IAS Loop Driver Card System Sensor Loop Driver Card Hochiki Loop Driver Card Apollo XP95 / Discovery Loop Driver Card Nittan Loop Driver Card RS 485 Communication Module RS232 Communication Module 20 Zone LED Display Indicator Card 60 Zone LED Display Indicator Card Internal Printer Module Processor Card 5 Loop Base Card Line Display Card PSU 721-001-301 721-001-302 721-002-301
429c/06
GL4-1Se
Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12.3 Dependency on more than one alarm signal: Type C 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition 1 loop analogue addressable control and indicating equipment
429c/07
12 Sep 2011
65
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 722-606-301 1 loop multi-protocol control panel, language group G100 Incorporating the following units: 795-072-100 795-068-100 795-058-105 795-066-100 795-044-001 795-004-001 795-005 124-206 124-209-005 124-370 4 PS82-2-NFR Morley-IAS Loop Driver Card System Sensor Loop Driver Card Hochiki Loop Driver Card Apollo XP95 / Discovery Loop Driver Card Nittan Loop Driver Card RS 485 Communication Module RS232 Communication Module Processor Card 1 Loop Base Card Line Display Card 2A PSU LPCB Ref. No.
GL4-2Se
Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12.3 Dependency on more than one alarm signal: Type C 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition 1-2 loop analogue addressable control and indicating equipment 720-606-301 1-2 loop multi-protocol control panel, language group G100 Incorporating the following units: 795-072-100 795-068-100 795-058-105 795-066-100 795-044-001 795-004-001 795-005 124-206 124-209-004 124-370 4 PS82-2-NFR Morley-IAS Loop Driver Card System Sensor Loop Driver Card Hochiki Loop Driver Card Apollo XP95 / Discovery Loop Driver Card Nittan Loop Driver Card RS 485 Communication Module RS232 Communication Module Processor Card 2 Loop Base Card Line Display Card 2A PSU
429c/08
GL4-5Se
Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12.3 Dependency on more than one alarm signal: Type C 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition 1-5 loop analogue addressable control and indicating equipment 721-606-301 1-5 loop multi-protocol control panel, language group G100 Incorporating the following units: 795-072-100 795-068-100 795-058-105 795-066-100 795-044-001 795-004-001 795-005 795-077-020 795-077-060 795-051-001 124-206 124-403 124-370 4 PS196-4-NFR Morley-IAS Loop Driver Card System Sensor Loop Driver Card Hochiki Loop Driver Card Apollo XP95 / Discovery Loop Driver Card Nittan Loop Driver Card RS 485 Communication Module RS232 Communication Module 20 Zone LED Display Indicator Card 60 Zone LED Display Indicator Card Internal Printer Module Processor Card 5 Loop Base Card Line Display Card PSU
429c/09
Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12.3 Dependency on more than one alarm signal: Type C 8.3 Fault signals from points 9.5 Disablement of addressable points
66
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Horizon HRZ2-8 10 Test condition 002-479-122 Language region 1, English manual 002-479-222 Language region 2 002-479-322 Language region 3, dual relay 002-492-222 Language region 2, English manual, dual relay 002-506-222 Language region 2, English manual 002-479-142 Language region 1, English manual 002-479-242 Language region 2 002-479-342 Language region 3, dual relay 002-492-242 Language region 2, English manual, dual relay 002-506-242 Language region 2, English manual 002-479-182 Language region 1, English manual 002-479-282 Language region 2 002-479-382 Language region 3, dual relay 002-492-282 Language region 2, English user manual, dual relay 002-506-282 Language region 2, English user manual Incorporating the following units: 020-747 8-way relay kit 020-772 4-way monitored sounder kit Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Output to automatic fire protection equipment: Type A 7.10.3 Output to automatic fire protection equipment: Type C 7.10.4 Fault monitoring of fire protection equipment 7.11.1 Delays to outputs 7.11.2 Manual or automatic switching of delays to outputs 7.12.2 Dependency on more than one alarm signal: Type B 8.9 Output to fault warning routing equipment 10 Test condition Single loop control and indicating equipment 714-001-111 PANEL DXc1-S SINGLE LOOP REGION 1 (UK & Iceland) 714-001-112 PANEL DXc1-S SINGLE LOOP REGION 2 (Iberia, India & ME) Incorporating as modular units: 124-410-001 Base PCB 1 Loop 124-411 Display PCB 010-115 PSU RS-50-24 Two loop control and indicating equipment 714-001-221 PANEL DXc2-M TWO LOOP REGION 1 (UK & Iceland) 714-001-222 PANEL DXc2-M TWO LOOP REGION 2 (Iberia, India & ME) Incorporating as modular units: 124-410 Base PCB 2 Loop 124-411 Display PCB 010-116 PSU RS-100-24 Four loop control and indicating equipment 714-001-241 PANEL DXc4-M FOUR LOOP REGION 1 (UK & Iceland) 714-001-242 PANEL DXc4-M FOUR LOOP REGION 2 (Iberia, India & ME) Incorporating as modular units: 124-410 Base PCB 2 Loop 124-411 Display PCB 124-417 2 Loop PCB 010-116 PSU RS-100-24 Incorporating as optional modular units: 795-099 795-102 795-103 795-111 CIE only) 795-117 795-118 795-122 795-123 795-124 KIT DXc NETWORK CARD KIT DXc 40 ZONE LED CARD KIT DXc 80 ZONE LED CARD WITH COVER KIT DXc 2 LOOP EXPANSION CARD (Applicable to the two loop KIT DXc PERFORMANCE CARD KIT DXc KEYSWITCH KIT DXc RS232 KIT DXc RS485 KIT DXc 80 ZONE LED CARD LPCB Ref. No. 429c/10
HRZ2-8e 4 Zone
429c/11
HRZ2-8e 8 Zone
429c/12
DXc1-S
429c/13
DXc2-M
429c/14
DXc4-M
429c/15
Certified with the following options with requirements from EN 54-2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 7.12.3 Dependencies on more than one alarm signal-Type C 7.13 Alarm counter
12 Sep 2011
67
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 8.3 9.5 10 Fault signals from points Disablement of each addressable point Test condition LPCB Ref. No.
Notes: 1. 2.
This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality.
MPC-102
548j/03
MPC-104
548j/04
MPC-108
548j/05
MPC-116
548j/06
IFP2
548p/01
68
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.10.1 Output to automatic Fire Protection Equipment Type A 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of addressable points Intelligent 8 loop, 140 zone analogue addressable control and indicating equipment Incorporating the following units: F7.820.1238 Indication board F7.820.1239 Loop board F7.820.1311 Power board F7.820.1312 ZCP board F7.820.1326 Keypad board F7.820.1237 Main board F7.820.1310 Mother board Incorporating as optional modular units: F7.820.1313 USB communication board Certified with the following options with requirements from EN 54 Part 2: 7.8 7.9.1 7.9.2 7.10.1 7.10.2 7.11 7.12.1 7.12.2 7.13 8.3 9.5 10 Output to fire alarm devices Output to fire routing equipment Alarm confirmation input from fire routing equipment Output type A Output type B Delays to outputs Dependencies on more than one alarm signal Type A Dependencies on more than one alarm signal Type B Alarm counter Fault signals from points Disablement of each address point Test condition LPCB Ref. No.
IFP8
548p/02
NV 2
018c/02
12 Sep 2011
69
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 4 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface (option) Certified with the following options with requirements from EN54-2: 1997: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 8 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface (option) Certified with the following options with requirements from EN54-2: 1997: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 16 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface (option) Certified with the following options with requirements from EN54-2: 1997: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 32 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1629 Display board C1632 16 Zone expansion board C1652 5A Power supply board C1631 Repeater interface (option) Certified with the following options with requirements from EN54-2: 1997: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 8 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface 16 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface 32 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface LPCB Ref. No.
NV 4
018c/03
NV 8
018c/04
NV 16
018c/05
NV 32
018c/06
NV 8R
018c/R01
NV 16R
018c/R02
NV 32R
018c/R03
70
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
ID2002
154d/01
Incorporating as modular units: 020-469-009 Extension Chassis with 17-80 Zone LED Display 020-708-009 Extension Chassis with Printer 020-644-009 Printer Assembly 020-588 LIB, Loop Interface Board 020-478 RS232 Communications Kit 020-479 RS485 Communications Kit 020-484 PSU2.5A Power Supply 020-648 PSU3A Power Supply 020-579 PSU7A Power Supply (Requires DTP / Booster Interface) 020-543 Interface 020-541-009 78Ah Battery and PSU7A Enclosure 020-472-009 Standard Back Box Kit 020-473-009 Extended Back Box Kit 020-474-009 Extended Deep Back Box Kit 020-475-009 Double Extended Back Box Kit 020-476-009 Double Extended Deep Back Box Kit 020-508-009 Standard Back Box Extension Kit 020-509-009 Deep Back box Extension Kit 020-480-009 Main Cover Kit 020-481-009 Extension Cover Kit 020-513-009 High Security Main Cover 020-514-009 High Security Extension Cover Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.11 Delays to outputs 7.12 Coincidence detection 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition Fixed 2 loop analogue addressable control and indicating equipment 002-474 Language Group 0 002-474-001 Language Group 1 002-473 Language Group 0, red cover Incorporating as modular units: 020-559-001 020-559-002 020-612 020-708-009 020-644-009 020-588 020-549 Extension Chassis with 1-64 Zone LED Display Extension Chassis with 65-128 Zone LED Display Extension Chassis with 1-256 Zone LED Display Extension Chassis with Printer Printer Assembly LIB Loop Interface Board ELIB, Enhanced Loop Interface Board DTP Dual Transmission Path / Booster
ID3002
154d/01
12 Sep 2011
71
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 020-478 RS232 Communications Kit 020-479 RS485 Communications Kit 020-484 PSU2.5A Power Supply 020-648 PSU3A Power Supply 020-579 PSU7A Power Supply (Requires DTP / Booster Interface) 020-543 DTP Dual Transmission Path / Booster Interface 020-541-009 78Ah Battery and PSU7A Enclosure 020-472-009 Standard Back Box Kit 020-473-009 Extended Back Box Kit 020-474-009 Extended Deep Back Box Kit 020-475-009 Double Extended Back Box Kit 020-476-009 Double Extended Deep Back Box Kit 020-508-009 Standard Back Box Extension Kit 020-509-009 Deep Backbox Extension Kit 020-480-009 Main Cover Kit 020-481-009 Extension Cover Kit 020-513-009 High Security Main Cover 020-514-009 High Security Extension Cover 020-621-009 256 Zone LED Display Cover 020-647 NGM ID2net Network Gateway Module 020-643 Fibre Optic Interface Module 2-8 loop analogue addressable control and indicating equipment 002-538 Language Group 0 basic equipment kit 020-538-001 Language Group 1 basic equipment kit ID300x panel and associated units are certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.11 Delays to outputs 7.12 Coincidence detection 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to Fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Single loop analogue addressable control and indicating equipment Incorporating the following units: 002-455 Language Group 0, 1.5A PSU, 12Ah batteries 002-455-001 Language Group 1, 1.5A PSU, 12Ah batteries 020-553 RS485 Communication Kit Single loop analogue addressable control and indicating equipment Incorporating the following units: 002-462 Language Group 0, 3A PSU, 12Ah Batteries, Printer Option 002-462-001 Language Group 1, 3A PSU, 12Ah Batteries, Printer Option 020-553 RS485 Communication Kit 020-644-009 PRN-ID Printer Kit Single loop analogue addressable control and indicating equipment Incorporating the following units: 002-460 Language Group 0, 3A PSU, 42Ah Batteries, Printer Option 002-460-001 Language Group 1, 3A PSU, 42Ah Batteries, Printer Option 020-553 RS485 Communication Kit 020-644-009 PRN-ID Printer Kit Single loop analogue addressable control and indicating equipment Incorporating the following units: 002-456 Language Group 0, 1.5A PSU, 12Ah batteries, VIEW 002-456-001 Language Group 1, 1.5A PSU, 12Ah batteries, VIEW 020-553 RS485 Communication Kit Single loop analogue addressable control and indicating equipment Incorporating the following units: 002-463 Language Group 0, 3A PSU, 42Ah Batteries, VIEW, Printer Option 002-463-001 Language Group 1, 3A PSU, 12Ah Batteries, VIEW, Printer Option 020-553 RS485 Communication Kit 020-644-009 PRN-ID Printer Kit Single loop analogue addressable control and indicating equipment Incorporating the following units: 002-461 Language Group 0, 3A PSU, 42Ah Batteries, VIEW, Printer Option LPCB Ref. No.
ID3000
154d/02
ID50
154d/03
ID51
154d/04
ID52
154d/05
ID60
154d/06
ID61
154d/07
ID62
154d/08
72
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 002-461-001 Language Group 1, 3A PSU, 42Ah Batteries, VIW, Printer Option 020-553 RS485 Communication Kit 020-644-009 PRN-ID Printer Kit The ID5x/6x models are certified with the following options with requirements from EN 54 part 2: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.11 Delays to outputs 7.12 Coincidence detection 7.13 Alarm Counter 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition 2 Zone conventional control and indicating equipment Including the following versions: 002-477-122 Language region 1, light grey 002-477-129 Language region 1, black & grey 002-490-222 Language region 2, light grey 002-477-229 Language region 2, black & grey 002-477-322 Language region 3, light grey, dual relay 002-477-329 Language region 3, black & grey, dual relay, English manual 002-490-129 Language region 1, black & grey, dual relay, English manual 002-490-229 Language region 2, black & grey, dual relay, English manual 002-490-222 Language region 2, light grey, English manual 4 Zone conventional control and indicating equipment Including the following versions: 002-477-142 Language region 1, light grey 002-477-149 Language region 1, black & grey 002-490-242 Language region 2, light grey 002-477-249 Language region 2, black & grey 002-477-342 Language region 3, light grey, dual relay 002-477-349 Language region 3, black & grey, dual relay, English manual 002-490-149 Language region 1, black & grey, dual relay, English manual 002-490-249 Language region 2, black & grey, dual relay, English manual 002-490-242 Language region 2, light grey, English manual 8 Zone conventional control and indicating equipment Including the following versions: 002-477-182 Language region 1, light grey 002-477-189 Language region 1, black & grey 002-477-282 Language region 2, light grey 002-477-289 Language region 2, black & grey 002-477-382 Language region 3, light grey, dual relay 002-477-389 Language region 3, black & grey, dual relay, English manual 002-490-189 Language region 1, black & grey, dual relay, English manual 002-490-289 Language region 2, black & grey, dual relay, English manual 002-490-282 Language region 2, light grey, English manual LPCB Ref. No.
NFS2-8
154d/09
NFS2-8
154d/10
NFS2-8
154d/11
The NFS2-8 (2-8 zones) panels are certified with the following options from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.11 Delays to outputs 7.12 Coincidence detection 10 Test condition Incorporating the following modular units, is approved for use with the ID3000 control and indicating equipment: 020-647 NGM, ID2net Network Gateway Module 020-643 Fibre Optic Interface Module 020-648 PSU3A Power Supply Module
154d/N02
Certificate No: 154f to ISO 7240: Part 2 & 4: 2003 Certificated Products NFS2-8 2 zone conventional control and indicating equipment LPCB Ref. No. 154f/01
12 Sep 2011
73
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Including the following versions: 002-477-122 Language region 1, light grey 002-477-129 Language region 1, black & grey 002-477-222 Language region 2, light grey 002-477-229 Language region 2, black & grey 002-477-322 Language region 3, light grey, dual relay 002-477-329 Language region 3, black & grey, dual relay, English manual 002-490-129 Language region 1, black & grey, dual relay, English manual 002-490-229 Language region 2, black & grey, dual relay, English manual 002-490-222 Language region 2, light grey, English manual 4 zone conventional control and indicating equipment Including the following versions: 002-477-142 Language region 1, light grey 002-477-149 Language region 1, black & grey 002-477-242 Language region 2, light grey 002-477-249 Language region 2, black & grey 002-477-342 Language region 3, light grey, dual relay 002-477-349 Language region 3, black & grey, dual relay, English manual 002-490-149 Language region 1, black & grey, dual relay, English manual 002-490-249 Language region 2, black & grey, dual relay, English manual 002-490-242 Language region 2, light grey, English manual 8 zone conventional control and indicating equipment Including the following versions: 002-477-182 Language region 1, light grey 002-477-189 Language region 1, black & grey 002-477-282 Language region 2, light grey 002-477-289 Language region 2, black & grey 002-477-382 Language region 3, light grey, dual relay 002-477-389 Language region 3, black & grey, dual relay, English manual 002-490-189 Language region 1, black & grey, dual relay, English manual 002-490-289 Language region 2, black & grey, dual relay, English manual 002-490-282 Language region 2, light grey, English manual The NFS2-8 (2 -8 zones) panels are certified with the following options from ISO 7240 Part 2: 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.11 Delays to outputs 7.12 Dependency detection 11 Test condition LPCB Ref. No.
NFS2-8
154f/02
NFS2-8
154f/03
Certificate No: 154g to EN 54-2: 1997 + A1: 2006, EN 54-4: 1997 + A1: 2002 + A2: 2006 Certificated Products ID3000 Basic Equipment Kit, (BEK): Modular analogue addressable control and indicating equipment. 020-538 Basic Equipment Kit ID3000, Group 0 020-538-001 ID3000 Basic Equipment Kit, Group 1 020-538-003 ID3000 Basic Equipment Kit, Group 3 020-538-004 ID3000 Basic Equipment Kit, Group 4 020-538-005 ID3000 Basic Equipment Kit, Group 5 Fixed build 2 loop analogue addressable control and indicating equipment. 002-473 ID3002, 2 Loop, PSU3A, Group 0, Red 002-474 ID3002, 2 Loop, PSU3A, Group 0 002-474-001 ID3002, 2 Loop, PSU3A, Group 1 002-474-003 ID3002, 2 Loop, PSU3A, Group 3 002-474-004 ID3002, 2 Loop, PSU3A, Group 4 002-474-005 ID3002, 2 Loop, PSU3A, Group 5 Fixed build 4 loop analogue addressable control and indicating equipment. 020-727 ID3004, 4 Loop, PSU7A, Group 0, LIB 020-728 ID3004, 4 Loop, PSU7A, Group 0, ELIB LPCB Ref. No. 154g/01
ID3002
154g/01
ID3004
154g/01
74
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 020-729 ID3004, 4 Loop, PSU7A, Group 0, LIB, printer 020-730 ID3004, 4 Loop, PSU7A, Group 0, LIB, 64 zone LED Fixed build 6 loop analogue addressable control and indicating equipment. 020-731 ID3006, 6 Loop, PSU7A, Group 0, 2xLIB 020-732 ID3006, 6 Loop, PSU7A, Group 0, 2xELIB 020-733 ID3006, 6 Loop, PSU7A, Group 0, 2xLIB, printer 020-734 ID3006, 6 Loop, PSU7A, Group 0, 2xLIB, 64 zone LED Fixed build 8 loop analogue addressable control and indicating equipment. 020-735 ID3008, 8 Loop, PSU7A, Group 0, 3xLIB, 78Ah Battery Enclosure 020-736 ID3008, 8 Loop, PSU7A, Group 0, 3xELIB, 78Ah Battery Enclosure 020-737 ID3008, 8 Loop, PSU7A, Group 0, 3xLIB, 78Ah Battery Enclosure, Printer 020-738 ID3008, 8 Loop, PSU7A, Group 0, 3xLIB, 78Ah Battery enclosure, printer, 64 Zone LED ID3000 series Incorporating the following as modular units: Enclosures: 020-472-009 Backbox Kit Standard, Black / Grey 020-473-009 Backbox Kit Extended, Black / Grey 020-474-009 Backbox Kit Extended Deep, Black / Grey 020-475-009 Backbox Kit Double Extended, Black / Grey 020-476-009 Backbox Kit Double Extended Deep, Black / Grey 020-480-009 Cover Kit Main Moulded, Black / Grey 020-481-009 Cover Kit Extended Moulded, Black / Grey 020-508-009 Backbox Extension Standard Assembly Black / Grey 020-509-009 Backbox Extension Deep Assembly Black / Grey 020-513-009 High Security Cover Kit Main, Black / Grey 020-514-009 High Security Cover Kit Extension 020-576 Main Cover, Stainless Steel 020-577 Extension Cover Stainless Steel 020-621-256 Zone Extension Cover, Stainless / Steel 020-621-009 256 Zone Extension Cover, Black / Grey 020-541-009 PSU7A / 78Ah Battery Enclosure Modules: 020-559-001 Module 020-559-002 Module 020-612 020-708-009 020-644-009 020-588 020-549 (ELIB) 020-478 020-479 020-648 020-579 020-548 020-543 020-773 020-877 020-643 020-647 Note 1: RS232 Interface RS485 Interface PSU3A PSU7A, (Requires Dual Transmission Path / Booster, PSU Interface) PSU7A Status Indication Dual Transmission Path / Booster, PSU Interface Routing Termination Unit (DEOL) Extinguishing Interface Module M221-SI IDnet Fibre Optic Interface Kit IDnet Network Gateway Module, (NGM) for use in ID3000 Panel Double Extended Chassis Kit 256 Zone Extension Chassis with Printer Printer Assembly Notifier Dual Loop Interface Board, (LIB) Notifier Dual Enhanced Loop Interface Board, Zone Extension Chassis Kit 65-128 Zone C/W Display LPCB Ref. No. 154g/01
ID3006
ID3008
154g/01
Products are available in language variants as follows: Group 0: English and Icelandic, with English manuals Group 1: English, Spanish, Portuguese, Icelandic and Italian Group 3: English, Swedish, Danish, Norwegian and Finish Group 4: English and Polish Group 5: English and Cyrillic Fixed build products incorporate a corresponding Basic Equipment Kit. 154g/02
Note 2: ID50
Single loop analogue addressable control and indicating equipment 002-455 ID50 Panel Group 0 002-455-001 ID50 Panel Group 1 002-455-003 ID50 Panel Group 3 002-455-004 ID50 Panel Group 4 May also incorporate the following optional modular unit:
12 Sep 2011
75
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products ID60 002-553 RS485 Communication Kit Single loop analogue addressable control and indicating equipment 002-456 ID60 Panel Group 0 002-456-001 ID60 Panel Group 1 002-456-003 ID60 Panel Group 3 002-456-004 ID60 Panel Group 4 May also incorporate the following optional modular unit: 002-553 RS485 Communication Kit Single loop analogue addressable control and indicating equipment 002-463 ID61 Panel Group 0 002-463-001 ID61 Panel Group 1 002-463-004 ID61 Panel Group 4 002-485-001 ID61 Panel Group 1 (Red) Incorporating the following modular unit: 020-648 PSU3A Kit May also incorporate the following optional modular units: 020-479 RS485 Communication Kit 020-644-009 Printer Kit Single loop analogue addressable control and indicating equipment 002-461 ID62 Panel Group 0 002-461-001 ID62 Panel Group 1 002-461-004 ID62 Panel Group 4 Incorporating the following modular unit: 020-648 PSU3A Kit May also incorporate the following optional modular units: 020-479 RS485 Communication Kit 020-644-009 Printer Kit Certified with the following options with requirements: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment: Type A 7.10.3 Outputs to fire protection equipment: Type C 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to Outputs 7.12.2 Dependencies on more than one alarm signal: Type B 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition LPCB Ref. No. 154g/03
ID61
154g/04
ID62
154g/05
NFS2-8 2 Zone
NFS2-8 4 Zone
NFS2-8 8 Zone
Note: Products are available in various language groups as follows: Group 0: English, Icelandic, French, Italian, Portuguese and Spanish, (shipped with English manuals) Group 1: English, Icelandic, French, Italian, Portuguese and Spanish Group 2: English, Dutch, German, French and Italian Group 3: English, Swedish, Danish, Norwegian and Finnish Group 4: English and Polish 002-477-122 Language region 1, light grey 002-477-129 Language region 1, black & grey 002-477-222 Language region 2, light grey 002-477-229 Language region 2, black & grey 002-477-322 Language region 3, light grey, dual relay 002-477-329 Language region 3, black & grey, dual relay, English manual 002-490-129 Language region 1, black & grey, dual relay, English manual 002-490-229 Language region 2, black & grey, dual relay, English manual 002-490-222 Language region 2, light grey, English manua 002-477-142 Language region 1, light grey 002-477-149 Language region 1, black & grey 002-477-242 Language region 2, light grey 002-477-249 Language region 2, black & grey 002-477-342 Language region 3, light grey, dual relay 002-477-349 Language region 3, black & grey, dual relay 002-490-149 Language region 1, black & grey, dual relay, English manual 002-490-249 Language region 2, black & grey, dual relay, English manual 002-490-242 Language region 2, light grey, English manual 002-477-182 Language region 1, light grey
154g/06
154g/07
154g/08
76
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 002-477-189 002-477-282 002-477-289 002-477-382 002-477-389 002-490-189 002-490-289 002-490-282 Language region 1, black & grey Language region 2, light grey Language region 2, black & grey Language region 3, light grey, dual relay Language region 3, black & grey, dual relay Language region 1, black & grey, dual relay, English manual Language region 2, black & grey, dual relay, English manual Language region 2, light grey, English manual LPCB Ref. No.
Incorporating the following units: 020-747 8-Way relay kit 020-772 4-way monitored sounder kit Certified with the following options from EN 54 Part 2: Output to fire alarm devices Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Output to automatic fire protection equipment: Type A 7.10.3 Output to automatic fire protection equipment: Type C 7.10.4 Fault monitoring of fire protection equipment 7.11.1 Delays to outputs 7.11.2 Manual or automatic switching of delays to outputs 7.12.2 Dependency on more than one alarm signal: Type B 8.9 Output to fault warning routing equipment 10 Test condition Basic Equipment Kit, (BEK): Modular analogue addressable control and indicating equipment. 020-628 Basic equipment kit ID2000 Group 0, 020-628-001Basic equipment kit ID2000 Group 1, UK ES PT IT 020-628-002Basic equipment kit ID2000 Group 2, UK NL FR Fixed build 2 loop analogue addressable control and indicating equipment. 002-459 ID2002, 2 loop control and indicating equipment, Group 1 Incorporating the following as optional modular units: Enclosures: 020-472-009 020-473-009 020-474-009 020-475-009 020-476-009 020-480-009 020-481-009 020-508-009 020-509-009 020-576 020-577 020-541-009 Modules: 020-649-009 020-708-009 020-644-009 020-588 020-478 020-479 020-648 Backbox Kit Standard, Black / Grey Backbox Kit Extended, Black / Grey Backbox Kit Extended Deep, Black / Grey Backbox Kit Double Extended, Black / Grey Backbox Kit Double Extended Deep, Black / Grey Cover Kit Main Moulded, Black / Grey Cover Kit Extended Moulded, Black / Grey Backbox Extension Standard Assembly Black / Grey Backbox Extension Deep Assembly Black / Grey Main Cover, Stainless Steel Extension Cover Stainless Steel PSU7A / 78Ah Battery Enclosure 64 Zone Extension Chassis Kit 64 Zone C/W Display Module Extension Chassis with Printer Printer Assembly Notifier Dual Loop Interface Board, (LIB) RS232 Interface RS485 Interface PSU3A PSU7A, (Requires Dual Transmission Path / Booster, PSU 7.8 7.9.1
ID2000
154g/09
ID2002
154g/09
Interface) 020-543 Dual Transmission Path / Booster, PSU Interface 020-548 PSU7A Status Indication Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.11 Delays to outputs 7.12.3 Dependency on more than one alarm signal type C 7.13 Alarm counter 8.3 Fault signals from points 9.5 Disablements of addressable points 10 Test condition
12 Sep 2011
77
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Note 2: manuals) 002-467 Group 1: English, Spanish, Portuguese and Italian Group 2: English, Dutch, and French IDnet Network Gateway Unit, (NGU) Notifier Protocol Incorporating the following as modular units: 020-643 IDnet Fibre Optic Interface Kit 020-647 IDnet Network Gateway Module, (NGM) for use in ID3000 Panels 020-648 PSU3A Certified with the following options with requirements: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Output to fire protection equipment type A 7.10.3 Output to fire protection equipment type C 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.2 Dependency on more than one alarm signal type B 7.12.3 Dependency on more than one alarm signal type C 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablements of addressable points 10 Test condition 154g/NO1 Products are available in language variants as follows: Group 0: English, Spanish, Portuguese and Italian (shipped with English LPCB Ref. No.
BSR-2114
1010a/02
78
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 2307103 2607103 DPP100-24 Loop 1 incorporating power control board Loop 2 board Lambda PSU block LPCB Ref. No.
Certified with the following options with requirements from EN 54 part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.10.1 Output to fire protection equipment (Type A) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.13 Alarm counter 8.3 Fault signal from points 8.9 Output to fault warning routing equipment 9.5 Disablement of each address point 10 Test condition
Pelco Finland Oy
Kalkkipellontie 6, PO Box 415, Fl-02601 Espoo, Finland Tel: +358 10 446 511 Fax: +358 10 446 5103 Website: www.pelco.com/nordic Manufactured at: Pelco Finland Oy, Manttaalitie 5-7, 01530 Vantaa, Finland
Certificate No: 883b to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2 : 2006 Certificated Products FX 8 Loop Analogue addressable CIE Basic unit incorporates the following modules: FX-MC FX-UI FX-PSB or FX-PSA Master controller User interface 4.5 A Power Supply 2.2 A Power Supply LPCB Ref. No. 883b/01
Optional Modules -The following modules are optional additions to the basic unit: FX-ALCB FX-ALCA FX-LC FX-SLC FX-CLC FX-IOC FX-OCA FX-SAA Two loop addressable controller Apollo protocol card One loop addressable controller Apollo protocol card Two loop addressable controller System Sensor protocol card Two loop addressable controller System Sensor advanced protocol card Sixteen loop conventional Controller I/O controller board 16 clean output module Serial communications adapter for communication with external Systems (BSM or Alarm Management Systems). FX-SAB Serial communications adapter for communication in a networked FX system and with external systems (BSM or Alarm Management Systems). FX-SAC Serial communication module FX-LB80 80 Zone LED indication card FX-LB32 32 Zone LED indication card FX-BAT Separate battery box (4x17Ah, 12V) FXM-BAT Separate battery box (4x12Ah, 12V) Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.10.3 7.11 Outputs to fire alarm devices Output to fire alarm routing equipment Output to Fire Protection Equipment (Output Type C) Delays to outputs
12 Sep 2011
79
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.12.2 7.13 8.3 8.4 8.9 9.5 10 Dependencies on more than one alarm signal (Type B) Alarm counter Fault signals from points Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
FXL
Notes: 1. Scope of approval does not include the operation of the network functionality. 2. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 8 Loop Analogue addressable CIE Basic unit incorporates the following modules: FX-MC FX-UI FX-PSB or FX-PSA Master controller User interface 4.5 A Power Supply 2.2 A Power Supply
883b/02
Optional Modules -The following modules are optional additions to the basic unit: FX-ALCB FX-ALCA FX-LC FX-SLC card FX-CLC FX-IOC FX-OCA FX-SAA FX-SAB FX-SAC FX-LB80 FX-LB32 FX-BAT FXM-BAT Two loop addressable controller - Apollo protocol card One loop addressable controller - Apollo protocol card Two loop addressable controller - System Sensor protocol card Two loop addressable controller System Sensor advanced protocol Sixteen loop conventional Controller I/O controller board 16 clean output module Serial communications adapter for communication with external systems (BSM or Alarm Management Systems). Serial communications adapter for communication in a networked FX system and with external systems (BSM or Alarm Management Systems). Serial communication module 80 Zone LED indication card 32 Zone LED indication card Separate battery box (4x17Ah, 12V) Separate battery box (4x12Ah, 12V)
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.10.3 7.11 7.12.2 7.13 8.3 8.4 8.9 9.5 10 Notes: 1) 2) Outputs to fire alarm devices Output to fire alarm routing equipment Output to Fire Protection Equipment (Output Type C) Delays to outputs Dependencies on more than one alarm signal (Type B) Alarm counter Fault signals from points Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
Scope of approval does not include the operation of the network functionality. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 883b/03
FXM
4 Loop Analogue addressable CIE Basic unit incorporates the following modules:
80
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products FX-MC FX-UI FX-PSB or FX-PSA Master Controller User Interface 4.5 A Power Supply 2.2 A Power Supply LPCB Ref. No.
Optional Modules -The following modules are optional additions to the basic unit: FX-ALCB protocol card FX-ALCA protocol card FX-LC Two loop addressable controller System sensor protocol card FX-SLC Two loop addressable controller System Sensor advanced protocol card FX-CLC Sixteen loop conventional Controller FX-IOC I/O controller board FX-OCA 16 clean output module FX-SAA Serial communications adapter for communication with external systems (BSM or Alarm Management Systems) FX-SAB Serial communications adapter for communication in a networked FX system and with external systems (BSM or Alarm Management Systems). FX-SAC Serial communication module FX-LB80 80 Zone LED indication card FX-LB32 32 Zone LED indication card FX-BAT Separate battery box (4x17Ah, 12V) FXM-BAT Separate battery box (4x12Ah, 12V) Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.10.3 7.11 7.12.2 7.13 8.3 8.4 8.9 9.5 10 Notes: 1) 2) Outputs to fire alarm devices Output to fire alarm routing equipment Output to Fire Protection Equipment (Output Type C) Delays to outputs Dependencies on more than one alarm signal (Type B) Alarm counter Fault signals from points Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition One loop addressable controller Apollo Two loop addressable controller Apollo
Scope of approval does not include the operation of the network functionality.
This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. FXS Analogue addressable Repeater Panel Incorporating the following modules: FX-MC FX-UI Master Controller User Interface 883b/R01
Optional Modules -The following modules are optional additions to the basic unit: FX-IOC I/O Controller
12 Sep 2011
81
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certified with the following options with requirements from EN 54: Part 2: 7.8 Output to fire alarm device(s) 7.9.1 Output to fire alarm routing equipment 7.11 Delays to outputs 7.12.3 Dependencies on more than one alarm signal Type C 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of each address point 10 Test condition Notes: 1. This unit does not meet the requirements of EN 54-2 & 4 as a stand alone unit. It is intended for use as part of the 6400 distributed network fire alarm system. In order to meet the requirements of EN 54-2 & 4 the unit must be used in conjunction with the following units: 6400/2LPN 2 Loop processing node and/or 6400/4LPN 4 Loop processing node 6400/PSU 8A Power supply with charger Scope of approval does not include the operation of the network functionality. 201ad/02
2. 6400/2LPN
2 Loop processing node Incorporating the following units: WEFA 169E SSU WEFA 315B Dual loop driver WEFA 160E Local IO WEFA 230C Terminal board WEFA 232D 6400 Loop terminal board WEFA 237A LPN display board WEFA 288C 6400 OPTO isolated 485 board WEFA 315B 6400 Loop Transmission board Notes: 1. This unit does not meet the requirements of EN 54-2 & 4 as a stand alone unit. It is intended for use as part of the 6400 distributed network fire alarm system. In order to meet the requirements of EN 542 & 4 the unit must be used in conjunction with the following units: 6400/DCN Display and Control node 6400/PSU 8A Power supply with charger 2. Scope of approval does not include the operation of the network functionality.
6400/4LPN
4 Loop processing node Incorporating the following units: WEFA 169E SSU
201ad/03
82
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products WEFA 315B 2 x Dual loop driver WEFA 160E Local IO WEFA 230C 5400 Terminal board WEFA 232D 6400 Loop terminal board WEFA 237A LPN display board WEFA 288C 6400 OPTO 485 board WEFA 315B 6400 Loop Transmission board Notes: 1. This unit does not meet the requirements of EN 54-2 & 4 as a stand alone unit. It is intended for use as part of the 6400 distributed network fire alarm system. In order to meet the requirements of EN 54-2 & 4 the unit must be used in conjunction with the following units: 6400/DCN Display and Control node 6400/PSU 8A Power supply with charger 2. Scope of approval does not include the operation of the network functionality. 6400/DCN/2LPN Display and control node plus 2 Loop processing node Incorporating the following units: WEFA 312E WEFA 168E WEFA 169E WEFA 315B WEFA 160E WEFA 230C WEFA 232D WEFA 288C WEFA 312E WEFA 315B Display control unit 5400 LED display unit SSU Dual loop driver Local IO 5400 Terminal board 6400 Loop terminal board 6400 OPTO isolated 485 board X400 SMT Display and control unit 6400 Loop Transmission board 201ad/04 LPCB Ref. No.
Certified with the following options with requirements from EN 54: Part 2: 7.8 7.9.1 7.11 7.12.3 7.13 8.3 8.9 9.5 10 Notes: 1. Output to fire alarm device(s) Output to fire alarm routing equipment Delays to outputs Dependencies on more than one alarm signal Type C Alarm counter Fault signals from points Output to fault warning routing equipment Disablement of each address point Test condition This unit does not meet the requirements of EN 54-2 & 4 as a stand alone unit. It is intended for use as part of the 6400 distributed network fire alarm system. In order to meet the requirements of EN 54-2 & 4 the unit must be used in conjunction with the following units: 6400/PSU 8A Power supply with charger Scope of approval does not include the operation of the network functionality. 201ad/05
2. 6400/DCN/4LPN
Display and control node plus 4 Loop processing node Incorporating the following units: WEFA 312E Display control unit WEFA 168E 5400 Local display unit WEFA 169E SSU WEFA 315B 2 x Dual loop driver WEFA 160E Local IO WEFA 230C 5400 Terminal board WEFA 232C 6400 Loop terminal board WEFA 288C 6400 OPTO isolated 485 board WEFA 312E X400 SMT Display and control unit WEFA 315B 6400 Loop Transmission board Certified with the following options with requirements from EN 54: Part 2: 7.8 7.9.1 Output to fire alarm device(s) Output to fire alarm routing equipment
12 Sep 2011
83
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.11 7.12.3 7.13 8.3 8.9 9.5 10 Notes: 1. Delays to outputs Dependencies on more than one alarm signal Type C Alarm counter Fault signals from points Output to fault warning routing equipment Disablement of each address point Test condition This unit does not meet the requirements of EN 54-2 & 4 as a stand alone unit. It is intended for use as part of the 6400 distributed network fire alarm system. In order to meet the requirements of EN 54-2 & 4 the unit must be used in conjunction with the following units: 6400/PSU 8A Power supply with charger Scope of approval does not include the operation of the network functionality. 201ad/06 LPCB Ref. No.
2. 6400/PSU
8A Power supply with charger Incorporating the following units: 9000/BC8/40 8A Power supply with charger Notes: 1. This unit does not meet the requirements of EN 54-2 & 4 as a stand alone unit. It is intended for use as part of the 6400 distributed network fire alarm system. In order to meet the requirements of EN 54-2 & 4 the unit must be used in conjunction with the following units: 6400/DCN Display and Control node 6400/2LPN 2 Loop processing node and/or 6400/4LPN 4 Loop processing node 2. Scope of approval does not include the operation of the network functionality. 3. Certified to EN 54-4 only.
6301
6302
6304
Analogue addressable 1 Loop control and indicating equipment Incorporating the following units: 41-860-52 Main Board 41-850-50 Terminal Board 40-877-65 CP250 Printer Board 31-100-22 Backbox 31-243-36 Inner Plate 62-407-57 Door 04-701-38 Printer Mechanism 40-465-43 Series 9000 Power Supply Unit 31-275-44 Optional external 24 AH battery box 40-879-67 Network Card (Note: Scope of approval does not include the operation of the network card) Analogue addressable 2 Loop control and indicating equipment Incorporating the following units: 41-860-52 Main Board 41-850-50 Terminal Board 40-879-67 CP250 Printer Board 31-100-22 Backbox 31-243-36 Inner Plate 62-407-57 Door 04-701-38 Printer Mechanism 40-465-43 Series 9000 Power Supply Unit 31-275-44 Optional external 24 AH battery box 40-879-67 Network Card (Note: Scope of approval does not include the operation of the network card) Analogue addressable 4 Loop control and indicating equipment Incorporating the following units: 41-860-52 Main Board 41-850-50 Terminal Board 40-879-67 CP250 Printer Board 31-100-22 Backbox 31-243-36 Inner Plate 62-407-57 Door 04-701-38 Printer Mechanism 40-465-43 Series 9000 Power Supply Unit
201k/01
201k/02
201k/03
84
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 41-913-56 SMT Dual 6000 Loop Card 31-275-44 Optional external 24 AH battery box 40-879-67 Network Card (Note: Scope of approval does not include the operation of the network card) LPCB Ref. No.
P-C201
548j/02
P-C202
548j/03
P-C204
548j/04
P-C208
548j/05
P-C216
548j/06
P-A2M
548p/01
12 Sep 2011
85
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products F7.820.827 F7.820.828 F7.820.829b F7.908.312d F7.820.1125 Switch board Loop interface board Power supply unit Zone indication and intervention board Loop board LPCB Ref. No.
Incorporating as optional modular units: F7.820.170 RS-232 board for configuration P-9901 Printer module kit Certified with the following options with requirements from EN 54 part 2: 7.8 Output to Fire Alarm Devices 7.10.1 Output to automatic Fire Protection Equipment Type A 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of addressable points Intelligent 8 loop, 140 zone analogue addressable control and indicating equipment Incorporating the following units: F7.820.1238 Indication board F7.820.1239 Loop board F7.820.1311 Power board F7.820.1312 ZCP board F7.820.1326 Keypad board F7.820.1237 Main board F7.820.1310 Mother board Incorporating as optional modular units: F7.820.1313 USB communication board Certified with the following options with requirements from EN 54 Part 2: 7.8 7.9.1 7.9.2 7.10.1 7.10.2 7.11 7.12.1 7.12.2 7.13 8.3 9.5 10 Output to fire alarm devices Output to fire routing equipment Alarm confirmation input from fire routing equipment Output type A Output type B Delays to outputs Dependencies on more than one alarm signal Type A Dependencies on more than one alarm signal Type B Alarm counter Fault signals from points Disablement of each address point Test condition
P-A8M
548p/02
UK Sales: Fire Safety and Security Limited Tel: +44 (0)1734 783703 Fax: +44 (0)1734 775750
Certificate No: 126h-(cl1) to EN 54-2: 1997 and EN 54-4: 1997 Certificate No: 126aw-(cl-1) to EN 54-2: 1997 + A1: 2006 and EN 54-5: 1997 + A1: 2002 + A2: 2006 Certificate No: 126aw-(cl-2) to EN 54-2: 1997 + A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006
86
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products FC2020 Control and indicating equipment Incorporating as modular units: FCM2001-A2 FP2001-A1 FCI2002-A1 FHA2002-A1 Operating unit 70W Power supply Periphery board (2-Loop) Rear housing LPCB Ref. No. 126aw/01
and as optional modular units: FCM2002-A2 FCM2004-A1 FCM2005-A2 FCM2006-A2 FTO2001-A1 FCI2003-A1 FTO2002-A1 FN2001-A1 FCA2001-A1 FCA2002-A1 FCI2001-D1 FCM2003-C2 FCM2003-N2 FTO2004-C1 FTO2007-N1 SV 24V-150W REDUX Operating unit PMI- & mainboard Operating add-on module Operating add-on module (2 LED indicator) Event printer Loop extension (FDnet) 24 LED indicator (internal) Networking module (See Note 1) Isolated RS232 module Isolated RS485 module Fire brigade periphery module Operating unit (incl. FBA-Term.CH) Operating unit (incl. EVAC-Term.NL) PCB compl. FBA-Terminal (CH) PCB compl. EVAC- module (NL) 150W Power supply Redundancy module
Certified with the following Options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10.1 7.10.2 7.10.3 7.10.4 7.11 7.12.1 7.12.2 7.12.3 7.13 8.3 8.9 9.5 10 11 Note: 1) 2) FC2030 Scope of approval does not include the operation of the network functionality. This approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 126aw/02 Output to fire alarm devices Output to fire alarm routing equipment Alarm Confirmation from fire alarm routing equipment Output to automatic fire protection equipment Type A Output to automatic fire protection equipment Type B Output to automatic fire protection equipment Type C Fault monitoring of automatic fire protection equipment Delays to outputs Coincidence detection type A (only for MS9i & collective line technology) Coincidence detection type B (only for FDnet & MS9i line technology) Coincidence detection type C Alarm counter Fault signals from points Output to fault warning routing equipment Disablement of addressable points Test condition Standardised input/output interface
Control and indicating equipment Incorporating as modular units: FCM2001-A2 SV24V-150W FCI2002-A1 FHA2003-A1 FCA2007-A1 Operating unit 150W Power supply Periphery board (2-Loop) Rear housing Card cage (2 slot)
and as optional modular units: FCM2002-A2 FCM2004-A1 Operating unit PMI- & mainboard
12 Sep 2011
87
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products FCM2007-A2 Operating add-on module (4 LED ind.) FCM2015-D1 Operating add-on (DA ind.) FTO2001-A1 Event printer FCI2003-A1 Loop extension (FDnet) FTO2002-A1 24 LED indicator (internal) FN2001-A1 Networking module (See Note 1) FCA2001-A1 Isolated RS232 module FCA2002-A1 Isolated RS485 module FCI2001-D1 Fire brigade periphery module FTO2003-D1 Emergency alarm indicator FCA2006-A1 Connection mod. (Card Cage) FCI2008-A1 I/O card (programmable) FCL2001-A1 Line card (FDnet) FCL2002-A1 Line card (collective) FCL2003-A1 Line card (MS9i) REDUX Redundancy module LPCB Ref. No.
Certified with the following Options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10.1 7.10.2 7.10.3 7.10.4 7.11 7.12.1 7.12.2 7.12.3 7.13 8.3 8.9 9.5 10 Note: 1) 2) FC2040 Scope of approval does not include the operation of the network functionality. This approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 126aw/03 Output to fire alarm devices Output to fire alarm routing equipment Alarm Confirmation from fire alarm routing equipment Output to automatic fire protection equipment Type A Output to automatic fire protection equipment Type B Output to automatic fire protection equipment Type C Fault monitoring of automatic fire protection equipment Delays to outputs Coincidence detection type A (only for MS9i & collective line technology) Coincidence detection type B (only for FDnet & MS9i line technology) Coincidence detection type C Alarm counter Fault signals from points Output to fault warning routing equipment Disablement of addressable points Test condition
Control and indicating equipment Incorporating as modular units; FCM2001-A2 FCM2007-A2 SV24V-150W FCI2004-A1 FHA2003-A1 Operating unit Operating add-on (4 LED ind.) 150W Power supply Periphery board (4-Loop) Rear housing
and as optional modular units: FCM2002-A2 FCM2004-A1 FCM2005-A2 FCM2006-A2 FTO2001-A1 FCI2003-A1 FTO2002-A1 FN2001-A1 FCA2001-A1 FCA2002-A1 FCI2001-D1 FCM2003-C2 FCM2003-N2 FTO2004-C1 FTO2007-N1 Operating unit PMI- & mainboard Operating add-on module Operating add-on module (2 LED indicator) Event printer Loop extension (FDnet) 24 LED indicator (internal) Networking module (See Note 1) Isolated RS232 module Isolated RS485 module Fire brigade periphery module Operating unit (incl. FBA-Term.CH) Operating unit (incl. EVAC-Term.NL) PCB compl. FBA-Terminal (CH) PCB compl. EVAC- module (NL)
88
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products REDUX Redundancy module LPCB Ref. No.
Certified with the following Options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10.1 7.10.2 7.10.3 7.10.4 7.11 7.12.2 7.12.3 7.13 8.3 8.9 9.5 10 Note: 1) 2) FC2060 Scope of approval does not include the operation of the network functionality. This approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 126aw/04 Output to fire alarm devices Output to fire alarm routing equipment Alarm Confirmation from fire alarm routing equipment Output to automatic fire protection equipment Type A Output to automatic fire protection equipment Type B Output to automatic fire protection equipment Type C Fault monitoring of automatic fire protection equipment Delays to outputs Coincidence detection type B (only for FDnet & MS9i line technology) Coincidence detection type C Alarm counter Fault signals from points Output to fault warning routing equipment Disablement of addressable points Test condition
Control and indicating equipment Incorporating as modular units: FCM2001-A2 SV24V-150W FCI2004-A1 FHA2003-A1 FCA2008-A1 Operating unit 150W Power supply Periphery board (4-Loop) Rear housing Card cage (5 slot)
and as optional modular units: FCM2002-A2 Operating unit FCM2004-A1 PMI- & mainboard FCM2007-A2 Operating add-on module (4 LED ind.) FCM2015-D1 Operating add-on (DA ind.) FTO2001-A1 Event printer FCI2003-A1 Loop extension (FDnet) FTO2002-A1 24 LED indicator (internal) FN2001-A1 Networking module (See Note 1) FCA2001-A1 Isolated RS232 module FCA2002-A1 Isolated RS485 module FCI2001-D1 Fire brigade periphery module FTO2003-D1 Emergency alarm indicator FCA2006-A1 Connection mod. (Card Cage) FCI2008-A1 I/O card (programmable) FCL2001-A1 Line card (FDnet) FCL2002-A1 Line card (collective) FCL2003-A1 Line card (MS9i) REDUX Redundancy module Certified with the following Options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10.1 7.10.2 7.10.3 7.10.4 7.11 7.12.1 Output to fire alarm devices Output to fire alarm routing equipment Alarm Confirmation from fire alarm routing equipment Output to automatic fire protection equipment Type A Output to automatic fire protection equipment Type B Output to automatic fire protection equipment Type C Fault monitoring of automatic fire protection equipment Delays to outputs Coincidence detection type A (only for MS9i & collective line technology)
12 Sep 2011
89
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.12.2 7.12.3 7.13 8.3 8.9 9.5 10 Note: 1) 2) FC721 Scope of approval does not include the operation of the network functionality. This approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 126aw/05 Coincidence detection type B (only for FDnet & MS9i line technology) Coincidence detection type C Alarm counter Fault signals from points Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
Control and indicating equipment Incorporating as modular units: FCM7201-Z3 FP2001-A1 FCI2010-A1 FHA2002-A1 Operating unit 70W Power supply Periphery board (1-Loop) Rear housing
and as optional modular units: FCM7202-Y3 FCM7203-H3 FCM2004-A1 FTO2001-A1 FTO2002-A1 FN2001-A1 FCA2001-A1 FCA2002-A1 Operating unit (+ LED Ind.) Operating unit (+ EVAC-Term.) PMI- & mainboard Event printer 24 LED indicator (internal) Networking module (See Note 1) Isolated RS232 module Isolated RS485 module
Certified with the following Options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10.1 7.10.2 7.10.3 7.10.4 7.11 7.12.1 7.12.2 7.12.3 7.13 8.3 8.9 9.5 10 Note: 1) 2) FC722 Scope of approval does not include the operation of the network functionality. This approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 126aw/06 Output to fire alarm devices Output to fire alarm routing equipment Alarm Confirmation from fire alarm routing equipment Output to automatic fire protection equipment Type A Output to automatic fire protection equipment Type B Output to automatic fire protection equipment Type C Fault monitoring of automatic fire protection equipment Delays to outputs Coincidence detection type A (only for MS9i & collective line technology) Coincidence detection type B (only for FDnet & MS9i line technology) Coincidence detection type C Alarm counter Fault signals from points Output to fault warning routing equipment Disablement of addressable points Test condition
Control and indicating equipment Incorporating as modular units: FCM7201-Z3 SV24V/150W FCI2002-A1 FHA2003-A1 Operating unit 150W Power supply Periphery board (2-Loop) Rear housing
90
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products FP2001-A1 70W Power supply FHA2001-A1 Rear housing FCM7202-Y3 Operating unit (+ LED Ind.) FCM7203-H3 Operating unit (+ EVAC-Term.) FCM2004-A1 PMI- & mainboard FTO2001-A1 Event printer FCI2003-A1 Loop extension (FDnet) FTO2002-A1 24 LED indicator (internal) FN2001-A1 Networking module (See Note 1) FCA2001-A1 Isolated RS232 module FCA2002-A1 Isolated RS485 module FCI2001-D1 Fire brigade periphery module REDUX Redundancy module Certified with the following Options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10.1 7.10.2 7.10.3 7.10.4 7.11 7.12.2 7.12.3 7.13 8.3 8.9 9.5 10 Note: 1) 2) FC724 Scope of approval does not include the operation of the network functionality. This approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 126aw/07 Output to fire alarm devices Output to fire alarm routing equipment Alarm Confirmation from fire alarm routing equipment Output to automatic fire protection equipment Type A Output to automatic fire protection equipment Type B Output to automatic fire protection equipment Type C Fault monitoring of automatic fire protection equipment Delays to outputs Coincidence detection type B (only for FDnet & MS9i line technology) Coincidence detection type C Alarm counter Fault signals from points Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
Control and indicating equipment Incorporating as modular units: FCM7201-Z3 SV24V/150W FCI2004-A1 FHA2003-A1 Operating unit 150W Power supply Periphery board (4-Loop) Rear housing
and as optional modular units: FCM7202-Y3 Operating unit (+ LED Ind.) FCM7203-H3 Operating unit (+ EVAC-Term.) FCM2004-A1 PMI- & mainboard FCM2007-A2 Operating add-on module (4 LED ind.) FTO2001-A1 Event printer FCI2003-A1 Loop extension (FDnet) FTO2002-A1 24 LED indicator (internal) FN2001-A1 Networking module (See Note 1) FCA2001-A1 Isolated RS232 module FCA2002-A1 Isolated RS485 module FCI2001-D1 Fire brigade periphery module REDUX Redundancy module Certified with the following Options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10.1 7.10.2 7.10.3 Output to fire alarm devices Output to fire alarm routing equipment Alarm Confirmation from fire alarm routing equipment Output to automatic fire protection equipment Type A Output to automatic fire protection equipment Type B Output to automatic fire protection equipment Type C
12 Sep 2011
91
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.10.4 7.11 7.12.2 7.12.3 7.13 8.3 8.9 9.5 10 Note: 1) 2) FT2040 Scope of approval does not include the operation of the network functionality. This approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 126aw/R0 1 Fault monitoring of automatic fire protection equipment Delays to outputs Coincidence detection type B (only for FDnet & MS9i line technology) Coincidence detection type C Alarm counter Fault signals from points Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
Fire detection terminal for use with FC2020, FC2030, FC2040 & FC2060 control and indicating equipment Incorporating as modular units: FCM2002-A2 FTI2001-A1 FHA2001-A1 Operating unit Fire terminal board Rear housing
and as optional modular units: FCM2001-A2 Operating unit FCM2004-A1 PMI- & mainboard FTO2001-A1 Event printer FTO2002-A1 24 LED indicator (internal) FN2001-A1 Networking module (See Note 1) FCA2001-A1 Isolated RS232 module FCA2002-A1 Isolated RS485 module FCM2003-C2 Operating unit (incl. FBA-Term.CH) FCM2003-N2 Operating unit (incl. EVAC-Term.NL) FTO2004-C1 PCB compl. FBA-Terminal (CH) FTO2007-N1 PCB compl. EVAC- module (NL) FP2001-A1 70W Power supply H28G200 Housing base REDUX Redundancy module Note: 1) 2) FT724 Scope of approval does not include the operation of the network functionality. This approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 126aw/R0 2
Fire detection terminal for use with FC721, FC722 & FC724 control and indicating equipment Incorporating as modular units: FCM7201-Z3 FTI2001-A1 FHA2001-A1 Operating unit Fire terminal board Rear housing
and as optional modular units: FCM7202-Y3 FCM7203-H3 FCM2004-A1 FTO2001-A1 FTO2002-A1 FN2001-A1 FCA2001-A1 FCA2002-A1 FP2001-A1 H28G200 REDUX Note: 1) Scope of approval does not include the operation of the network functionality. Operating unit (+ LED Ind.) Operating unit (+ EVAC-Term.) PMI- & mainboard Event printer 24 LED indicator (internal) Networking module (See Note 1) Isolated RS232 module Isolated RS485 module 70W Power supply Housing base Redundancy module
92
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 2) CS1140 This approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 126h/01 LPCB Ref. No.
Control and indicating equipment Comprising the following products: CC1140 Control and indicating equipment CT11 Operators console CI1140 Integrated central unit Incorporating as modular units: E3X100 Master module E3X102 Master Module E3X103 Master Module E3X120 Master card Cl1145 E3C010 Battery charging module E3C011 Battery charging module B2F020 Converter B2F040 Converter E3M140 Line module FD20 E3M070 Line module "Interactive" E3M071 Line module Interactive K3M140 Line card FD20 K3M071 Line card Interactive to E3X120 K3M080 Line card Collective B3Q460 Control console Algopilot "CT11" B3Q321 Fire department control panel (Swiss) E3G050 Contacts control unit E3G070 Universal control unit E3I020 RS232 unit K3I060 RS232 module E3L020 I/O control unit E3M080 Group line unit K3R071 Synoptic - Algo pilot K3R070 Synoptic - Algo pilot K3I050 LON/Synoptic converter E3M060 MS9i module E3G091 Remote TX i/face E3M110 AnalogPLUS module E3M111 Line module AnaloguPLUS K3M111 Line card AnalogPLUS B3R051 Parallel indicator panel (24 x 2 LED) E3G080 Control module Extinguishing B3Q440 Control console Extinguishing module E3G060 Control monitored module E3H020 C-Bus Gateway module E3I040 I-Bus/LON module B3Q560/B3Q600 Terminals China B3Q580 Text display terminal B3Q590 Text control terminal Nordic B3Q660 Operator console Standard Algopilot "CT11" B3Q661 Operator console Standard Algopilot "CT11" B3Q680 Control console Nordic Algopilot "CT11" B3Q565 Operator control Asia Pacific Algopilot "CT11" K3N010 RAM - Extension K3I110 LON Input/Output Box E3M171 Line Module Ex Interactive K5L020 Multi-Sect. Extinguishing P.C.B K3G060 Relay Card to Synptic BUS E3G100 Emergency Operation Link E3G110 Emergency Link to E3G080 K3R072 Synoptical Driver M3C080 Horn Monitoring Module Certified with the following Options with requirements from EN 54-2:1997 7.8 Outputs to fire alarm devices 7.9 Output to fire alarm routing equipment 7.10 Output to Fire Protection Equipment 7.11 Delays to outputs 7.12 Coincidence detection 7.13 Alarm counter 8.3 Fault signals from points 8.4 Complete failure of power supply 9.5 Disablement of addressable points
12 Sep 2011
93
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 10 11 Test condition Standardised input/output interface LPCB Ref. No.
Notes: 1) Compliance with clause 12.6.2 of EN 54-2:1997 requires LCD screen saving feature to be disabled for the alarm condition.
SMS
Hamilton Industrial Park, 140 Waterside Road, Leicester LE5 1TN, United Kingdom Tel: +44 (0)116 246 2000 Fax: +44 (0)116 246 2300 E-mail: Nikki.Morgan@honeywell.com Website: www.gent.co.uk
Certificate No: 042bc to EN 54-2: 1997+ A1: 2006 and EN 54-4: 1997 + A1: 2002 + A2: 2006 Certificated Products Sentri1 Single loop analogue addressable control and indicating equipment Incorporating as modular units: 2434-881 Mother board 2434-862 Power supply 2434-887 H.M.I (Human Machine Interface) Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 10 Test condition Single loop analogue addressable control and indicating equipment (Spanish language variant) Incorporating as modular units: 2434-881 Mother board 2434-862 Power supply 2434-887 H.M.I (Human Machine Interface) Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 10 Test condition Single loop analogue addressable control and indicating equipment (Portuguese language variant) Incorporating as modular units: 2434-881 Mother board 2434-862 Power supply 2434-887 H.M.I (Human Machine Interface) Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 10 Test condition Two loop analogue addressable control and indicating equipment (English language) Two loop analogue addressable control and indicating equipment (Portuguese language variant) Two loop analogue addressable con(Spanish language variant) control and indicating equipment Incorporating as modular units: 2434-859 2434-862 2434-762 2434-669 4374-164 Master Controller Board (MCB) Power Supply Unit Display and Key card (DKC) Loop processor card Text Membrane (English) LPCB Ref. No. 042bc/01
Sentri1-SP
042bc/02
Sentri1-PO
042bc/03
94
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 4374-169 Text Membrane (Spanish) 4374-170 Text Membrane (Portuguese) 2434-861 Copper network card Scope of approval does not include the operation of the network card) Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of each address point 10 Test condition One to Four loop analogue addressable control and indicating equipment (English language) One to Four loop analogue addressable control and indicating equipment (Portuguese language variant without printer module) One to Four loop analogue addressable control and indicating equipment (Spanish language variant without printer module) Incorporating as modular units 2434-863 Master controller card (M.C.C) 2434-710 Loop card 2434-831 Power supply PCB 2434-854 Backplane PCB 2434-861 Display and Key card (D.K.C) 2434-864 Terminal card 2434-565 Printer Module 4374-167 Text Membrane (English) 4374-171 Text Membrane (Spanish) 4374-172 Text Membrane (Portuguese) 2434-674 Copper network card Scope of approval does not include the operation of the network card) Certified with the following options with requirements from EN 54 Part 2: 7.8 7.11 8.3 9.5 10 Output to fire alarm devices Delays to outputs Fault signals from points Disablement of each address point Test condition LPCB Ref. No.
12 Sep 2011
95
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 4 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface (option) Certified with the following options from EN 54: Part 2 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 8 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface (option) Certified with the following options from EN 54: Part 2 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 16 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface (option) Certified with the following options from EN 54: Part 2 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 32 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1629 Display board C1632 16 Zone expansion board C1652 5A Power Supply board C1631 Repeater interface (option) Certified with the following options from EN 54: Part 2 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 8 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface 16 zone conventional repeater unit LPCB Ref. No.
MZXC+
018c/03
MZXC+
018c/04
MZXC+
018c/05
MZXC+
018c/06
MZXC+
018c/R01
MZXC+
018c/R02
96
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface 32 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1629 Display board C1631 Repeater interface 2-8 loop Analogue Addressable Control and Indicating Equipment Note: 1. The following product variants are approved Finished goods No. 557.200.003, MX4000 1-4 loop CIE, shallow housing Finished goods No. 557.200.005, MX-BBX battery box, shallow housing Finished goods No. 557.200.004, MX4000 1-8 loop CIE, deep housing Finished goods No. 557.200.006, MX-DPBX battery box, deep housing (door access) Finished goods No. 557.200.016, MX-DPBX battery box, deep housing (plain cover access) Finished goods No. 557.200.009, MX4000 1-4 loop, flush housing Finished goods No. 557.200.019, MX-BBX-F battery box, flush housing Incorporating as modular units: OCM800 ODM800 CPU800 FIM802 PSU830 Operator Control Module Operator Display Module Main CPU module Field Interface Module drives 1 or 2 loops Power Supply Module LPCB Ref. No.
MZXC+
018c/R03
MX4000 2-8
018f/01
and as optional modular units: XLM800 ANN840 ANN880 COM820 MPM800 IOB800 FB800 Expansion Loop Module drives 1 or 2 additional loops 40 + 40 LED Annunciator module 80 LED Annunciator module 20 way Status Command Module Multi Purpose Interface Module Input/Output Expansion Board Fuse Board
MXR
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A dependency) 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.12.3 Dependencies on more than one alarm signal (Type C dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition 11 Standardized input/output interface Repeater panel is approved for use with the MX4000 Control and Indicating Equipment: Note: 1. The following product variants are approved Finished goods No. 557.200.013, MXR-PSU repeater Finished goods No. 557.200.018, MXR-PSU-F repeater flush housing Finished goods No. 557.200.012, MXR repeater Finished goods No. 557.200.017, MXR-F repeater flush housing Incorporating as modular units: OCM800 (Operator Control Module) ODM800 (Operator Display Module)
018f/R01
12 Sep 2011
97
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products PSU830 (Power Supply Module) and as optional modular units: ANN840 (40 + 40 LED Annunciator) ANN880 (80 LED Annunciator) MPM800 (Multi Purpose Interface Module) IOB800 (Input/Output Expansion Board) FB800 (Fuse Board) 1 loop Analogue Addressable Control and Indicating Equipment Note: 1. The following product variants are approved Finished goods No. 557.200.001, MX1000 1 loop CIE, shallow housing Finished goods No. 557.200.005, MX-BBX battery box, shallow housing Finished goods No. 557.200.002, MX1000 1 loop CIE, deep housing Finished goods No. 557.200.019, MX-BBX-F battery box, flush housing Incorporating as modular units: OCM800 ODM800 CPU800 FIM801 PSU830 Operator Control Module Operator Display Module Main CPU module Field Interface Module Power Supply Module LPCB Ref. No.
MX1000
018g/01
and as optional modular units: ANN840 ANN880 COM820 MPM800 IOB800 FB800 40 + 40 LED Annunciator module 80 LED Annunciator module 20 way Status Command Module Multi Purpose Interface Module Input/Output Expansion Board Fuse Board
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A dependency) 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.12.3 Dependencies on more than one alarm signal (Type C dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition 11 Standardized input/output interface MXR Repeater panel is approved for use with the MX1000 Control and Indicating Equipment (LPCB Reference 018f/R01): Note: 1. The following product variants are approved Finished goods No. 557.200.013, MXR-PSU repeater Finished goods No. 557.200.018, MXR-PSU-F repeater flush housing Finished goods No. 557.200.012, MXR repeater Finished goods No. 557.200.017, MXR-F repeater flush housing Incorporating as modular units: OCM800 (Operator Control Module) ODM800 (Operator Display Module) PSU830 (Power Supply Module) and as optional modular units: ANN840 (40 + 40 LED Annunciator)
98
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products ANN880 (80 LED Annunciator) MPM800 (Multi Purpose Interface Module) IOB800 (Input/Output Expansion Board) FB800 (Fuse Board) 1-8 loop Analogue Addressable Control and Indicating Equipment Notes: 1. The following product variants are approved Finished goods No. 557.200.203, MX2-210 1-4 loop CIE, shallow housing Finished goods No. 557.200.205, MX2-211, 1-8 loop CIE, deep housing Incorporating as modular units: DCM800 CPU800 FIM802 PSU830 Operator Control / Display Module Main CPU module Field Interface Module drives 1 or 2 loops Power Supply Module LPCB Ref. No.
MX2
018h/01
and as optional modular units: XLM800 ANN881 MPM800 FB800 Expansion Loop Module drives 1 or 2 additional loops 80 LED Annunciator module Multi Purpose Interface Module Fuse Board
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A dependency) 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.12.3 Dependencies on more than one alarm signal (Type C dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition 11 Standardized input/output interface MXR Repeater panel is approved for use with the MX2 Control and Indicating Equipment (LPCB Reference 018f/R01): Notes: 1. The following product variants are approved Finished goods No. 557.200.013, MXR-PSU repeater Finished goods No. 557.200.018, MXR-PSU-F repeater flush housing Finished goods No. 557.200.012, MXR repeater Finished goods No. 557.200.017, MXR-F repeater flush housing Incorporating as modular units: OCM800 (Operator Control Module) ODM800 (Operator Display Module) PSU830 (Power Supply Module) and as optional modular units: ANN840 (40 + 40 LED Annunciator) ANN880 (80 LED Annunciator) MPM800 (Multi Purpose Interface Module) IOB800 (Input/Output Expansion Board) FB800 (Fuse Board) 2-8 loop Analogue Addressable Control and Indicating Equipment Notes: 1. The following product variants are approved Finished goods No. 557.200.600, T2000 2-8 loop CIE, stainless housing Finished goods No. 557.200.602, T2000-BB battery box, stainless housing Finished goods No. 557.200.610, T2000 2-8 loop CIE, mild steel housing
T2000
018j/01
12 Sep 2011
99
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Finished goods No. 557.200.605, T2000-BB battery box, mild steel housing Incorporating as modular units: OCM800 ODM800 CPU800 FIM802 PSU830 Operator Control Module Operator Display Module Main CPU module Field Interface Module drives 1 or 2 loops Power Supply Module LPCB Ref. No.
and as optional modular units: XLM800 ANN840 ANN880 COM820 MPM800 IOB800 FB800 Expansion Loop Module drives 1 or 2 additional loops 40 + 40 LED Annunciator module 80 LED Annunciator module 20 way Status Command Module Multi Purpose Interface Module Input/Output Expansion Board Fuse Board
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A dependency) 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.12.3 Dependencies on more than one alarm signal (Type C dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition 11 Standardized input/output interface T2000R Repeater panel is approved for use with the T2000CV Control and Indicating Equipment (LPCB Reference 018j/R01): Notes 1. The following product variants are approved Finished goods No. 557.200.601, T2000R (AC) repeater stainless housing Finished goods No. 557.200.604, T2000R (DC) repeater stainless housing Finished goods No. 557.200.611, T2000R (AC) repeater mild steel housing Finished goods No. 557.200.612, T2000R (DC) repeater mild steel housing Incorporating as modular units: OCM800 (Operator Control Module) ODM800 (Operator Display Module) PSU830 (Power Supply Module) and as optional modular units: ANN840 (40 + 40 LED Annunciator) ANN880 (80 LED Annunciator) MPM800 (Multi Purpose Interface Module) IOB800 (Input/Output Expansion Board) FB800 (Fuse Board) Repeater panel is approved for use with the T2000 Control and Indicating Equipment: Notes: 1. The following product variants are approved Finished goods No. 557.200.601, T2000R (AC) repeater stainless housing Finished goods No. 557.200.604, T2000R (DC) repeater stainless housing Finished goods No. 557.200.611, T2000R (AC) repeater mild steel housing Finished goods No. 557.200.612, T2000R (DC) repeater mild steel housing Incorporating as modular units:
T2000R
018j/R01
100
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products OCM800 (Operator Control Module) ODM800 (Operator Display Module) PSU830 (Power Supply Module) and as optional modular units: ANN840 (40 + 40 LED Annunciator) ANN880 (80 LED Annunciator) MPM800 (Multi Purpose Interface Module) IOB800 (Input/Output Expansion Board) FB800 (Fuse Board) 3 loop Analogue Addressable Control and Indicating Equipment Notes: 1. The following product variants are approved Finished goods No. 557.200.620, T2000CV 3 loop CIE Finished goods No. 557.200.605, T2000-BB battery box Incorporating as modular units: OCM800 ODM800 CPU800 XLM800 FIM802 PSU830 Operator Control Module Operator Display Module Main CPU module Expansion Loop Module drives 1 or 2 additional loops Field Interface Module drives 1 or 2 loops Power Supply Module LPCB Ref. No.
T2000CV
018k/01
and as optional modular units: ANN840 ANN880 COM820 MPM800 IOB800 FB800 40 + 40 LED Annunciator module 80 LED Annunciator module 20 way Status Command Module Multi Purpose Interface Module Input/Output Expansion Board Fuse Board
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A dependency) 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.12.3 Dependencies on more than one alarm signal (Type C dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition 11 Standardized input/output interface T2000R Repeater panel is approved for use with the T2000CV Control and Indicating Equipment (LPCB Reference 018j/R01): Notes: 1) The following product variants are approved Finished goods No. 557.200.601, T2000R (AC) repeater stainless housing Finished goods No. 557.200.604, T2000R (DC) repeater stainless housing Finished goods No. 557.200.611, T2000R (AC) repeater mild steel housing Finished goods No. 557.200.612, T2000R (DC) repeater mild steel housing Incorporating as modular units: OCM800 ODM800 PSU830 (Operator Control Module) (Operator Display Module) (Power Supply Module)
12 Sep 2011
101
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products ANN840 (40 + 40 LED Annunciator) ANN880 (80 LED Annunciator) MPM800 (Multi Purpose Interface Module) IOB800 (Input/Output Expansion Board) FB800 (Fuse Board) Analogue Addressable Control and Indicating Equipment 1 loop, 16 Zone Incorporating as modular units: DCM816 CPU800 FIM801 PMM800 BAQ60T24 Operator Control / Display Module Main CPU module Field Interface Module Power Supply Monitor Power Supply LPCB Ref. No.
MZX-125
018m/01
MZX-250
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A dependency) 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.12.3 Dependencies on more than one alarm signal (Type C dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition 11 Standardized input/output interface Analogue Addressable Control and Indicating Equipment 1 loop, 32 Zone Incorporating as modular units: DCM832 CPU800 FIM801 PMM800 BAQ140T24 Operator Control / Display Module Main CPU module Field Interface Module Power Supply Monitor Power Supply
018m/02
MZX-251
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A dependency) 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.12.3 Dependencies on more than one alarm signal (Type C dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition 11 Standardized input/output interface Analogue Addressable Control and Indicating Equipment 1 loop, 32 Zone Incorporating as modular units:
018m/03
102
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products DCM832 CPU800 FIM801 PMM800 BAQ140T24 Operator Control / Display Module Main CPU module Field Interface Module Power Supply Monitor Power Supply LPCB Ref. No.
MZX-250-CH
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A dependency) 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.12.3 Dependencies on more than one alarm signal (Type C dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition 11 Standardized input/output interface Analogue Addressable Control and Indicating Equipment 1 loop, 32 Zone Incorporating as modular units: DCM832 CPU800 FIM801 PMM800 FBF-CH BAQ140T24 Operator Control / Display Module Main CPU module Field Interface Module Power Supply Monitor Swiss Fire Brigade Interface Power Supply
018m/04
MZX-251-S
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A dependency) 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.12.3 Dependencies on more than one alarm signal (Type C dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition 11 Standardized input/output interface Analogue Addressable Control and Indicating Equipment 1 loop, 32 Zone Incorporating as modular units: DCM832 -S Operator Control / Display Module (Scandinavian Fire Brigade Interface/key) CPU800 Main CPU module FIM801 Field Interface Module PMM800 Power Supply Monitor
018m/05
12 Sep 2011
103
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products BAQ140T24 Power Supply LPCB Ref. No. and as an optional modular unit: IOB800 Input/Output Expansion Board
MZX-252
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A dependency) 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.12.3 Dependencies on more than one alarm signal (Type C dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition 11 Standardized input/output interface Analogue Addressable Control and Indicating Equipment 2 loop, 32 Zone Incorporating as modular units: DCM832 CPU800 FIM802 PMM800 BAQ140T24 Operator Control / Display Module Main CPU module Field Interface Module Power Supply Monitor Power Supply
018m/06
MZX-252-CH
Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A dependency) 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.12.3 Dependencies on more than one alarm signal (Type C dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition 11 Standardized input/output interface Analogue Addressable Control and Indicating Equipment 2 loop, 32 Zone Incorporating as modular units: DCM832 CPU800 FIM802 PMM800 FBF-CH BAQ140T24 Operator Control / Display Module Main CPU module Field Interface Module Power Supply Monitor Swiss Fire Brigade Interface Power Supply
018m/07
104
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Certified with the following options with requirements from EN 54 Part 2: 7.8 Output to fire alarm devices 7.9.1 Output to fire alarm routing equipment 7.9.2 Alarm confirmation input from fire alarm routing equipment 7.10.1 Outputs to fire protection equipment (Type A) 7.10.2 Outputs to fire protection equipment (Type B) 7.10.3 Outputs to fire protection equipment (Type C) 7.10.4 Fault monitoring of fire protection equipment 7.11 Delays to outputs 7.12.1 Dependencies on more than one alarm signal (Type A dependency) 7.12.2 Dependencies on more than one alarm signal (Type B dependency) 7.12.3 Dependencies on more than one alarm signal (Type C dependency) 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition 11 Standardized input/output interface 16 Zone Repeater Panel, is approved for use with the MZX-125 Control and Indicating Equipment Incorporating as modular units: DCM816 Operator Control / Display Module PMM800 Power Supply Monitor BAQ60T24 Power Supply 32 Zone Repeater Panel, is approved for use with the MZX-250, MZX-250-CH, MZX-251, MZX-252 & MZX-252-CH Control and Indicating Equipment Incorporating as modular units: DCM832 Operator Control / Display Module PMM800 Power Supply Monitor BAQ60T24 Power Supply 32 Zone Repeater Panel, is approved for use with the MZX-251-S Control and Indicating Equipment Incorporating as modular units: DCM832-S Operator Control / Display Module PMM800 Power Supply Monitor BAQ60T24 Power Supply LPCB Ref. No.
MZX-16-R
018m/R01
MZX-32-R
018m/R02
MZX-32-SR
018m/R03
Certificate No: 092h to EN 54: Part 2 and 4:1997 Certificate No: 018c to EN 54: Part 2 and 4: 1997 Certificate No: 092e to BS 5839-4: 1988 This certificate is to a withdrawn standard. Control and indicating equipment conforming to this version of the standard is not suitable for use within the jurisdiction of the European Union (EU). This certification, to the withdrawn version of the standard, is maintained because control and indicating equipment meeting the withdrawn version of the standard is still requested by some regulators outside of the EU. Certificate No: 092v to EN54-2: 1997 + A1: 2006 and EN54-4: 1997 + A1: 2002 + A2: 2006 Certificated Products ZC3-EN2 2 zone conventional control and indicating equipment LPCB Ref. No. 018c/02
12 Sep 2011
105
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface board (option) 4 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface board (option) Certificated with the following options from EN 54-2: 7.8 Output to fire alarm devices 7.9 Output to fire alarm routing equipment 7.10 Output to fire protection equipment 7.11 Delays to outputs 8.9 Output to fault routing equipment 10 Test condition 8 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface board (option) Certificated with the following options from EN 54-2: 7.8 Output to fire alarm devices 7.9 Output to fire alarm routing equipment 7.10 Output to fire protection equipment 7.11 Delays to outputs 8.9 Output to fault routing equipment 10 Test condition 16 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface board (option) Certificated with the following options from EN 54-2: 7.8 Output to fire alarm devices 7.9 Output to fire alarm routing equipment 7.10 Output to fire protection equipment 7.11 Delays to outputs 8.9 Output to fault routing equipment 10 Test condition 32 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1629 Display board C1632 16 Zone Expansion board C1652 5A Power supply board C1631 Repeater interface board (option) Certificated with the following options from EN 54-2: 7.8 Output to fire alarm devices 7.9 Output to fire alarm routing equipment 7.10 Output to fire protection equipment 7.11 Delays to outputs 8.9 Output to fault routing equipment 10 Test condition 8 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface board (option) 16 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface board (option) 32 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface board (option) 2,4 and 8 loop analogue addressable control and indicating equipment Incorporating as modular units: ZP-PS230V4A-3 power supply unit LPCB Ref. No.
ZC3-EN4
018c/03
ZC3-EN8
018c/04
ZC3-EN16
018c/05
ZC3-EN32
018c/06
ZC3-RDU230-8
018c/R01
ZC3-RDU230-16
018c/R02
ZC3-RDU230-32
018c/R03
ZP5 Mark 5
092e/01
106
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products ZP-MCB5 main control board ZP-LD8-4 line driver board ZP-DU81L-2 LCD ZP-DU81P-2 plasma display board ZP-PR1 printer kit ZP-RL8-1 8 way programmable relay board Note: This product is certificated to a withdrawn standard. Control and indicating equipment conforming to this standard are not suitable for use within the jurisdiction of the European Union (EU). The certification, to the withdrawn standard, is maintained because detectors meeting the withdrawn standard requirements are still requested by some regulators outside the EU. 1, 2 and 4 loop analogue addressable control and indicating equipment Incorporating as modular units: ZP3-MB2-4L 4 Loop Main board ZP3-MB2-2L 2 Loop Main board ZP3-MB2-1L 1 Loop Main board ZP3-CPU1 CPU board ZP3-DB1 Display board ZP3-ZB50 50 Zone LED board ZP3-CB1 Commissioning key switch board ZP3-PR1 Printer Kit ZP3AB-SCB-D Control bus drive ZP3AB-RL8 Programmable relay output board, 8 way ZP3-AB-MA8 Programmable monitored output board, 8 way ZP3AB-OP24 Programmable transistor output board, 24 way ZP3AB-MIP8 Programmable input board, 8 way ZP3-xL 230V ac Power supply unit Approved with the following options from EN54-2: 7.8 Output to fire alarm devices 7.9 Output to fire alarm routing equipment 7.10 Output to fire protection equipment 7.11 Delays to outputs 7.12 Co-incidence detection 7.13 Alarm counter 8.3 Fault signals from points 8.9 Output to fault routing equipment 9.5 Disablement of addressable points 10.0 Test condition 11.0 Standardised input/output interface Conventional two zone control and indicating equipment Incorporating the following units: 1X-F2-MB Main control board 2010-1-RB Optional relay board 2010-1-SB Optional expander I/O board 2010-PS-20 2A Power Supply Certified with the following options with requirements from EN 54-2: 7.8 7.11 8.4 10 Notes: 1. 2. Output to fire alarm device(s) Delays to outputs Total loss of the power supply Test condition LPCB Ref. No.
ZP3
092h/01
1X-F2
092v/01
This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Available with the following language kits: 01 Dutch, 02 French, 03 English (UK), 04 German, 05 Norwegian, 06 Swedish, 07 Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20 Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28 Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 French International, 45 Romanian, 71 Catalan, 99 - English (International) 092v/01
1X-F2-SC
Conventional two zone control and indicating equipment with Scandinavian key switch Incorporating the following units: 1X-F2-MB Main control board 2010-1-RB Optional relay board 2010-1-SB Optional expander I/O board 2010-PS-20 2A Power Supply 2010-SK Scandinavian Key Lock and Key
12 Sep 2011
107
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Certified with the following options with requirements from EN 54-2: 7.8 7.11 8.4 10 Notes: 1. 2. Output to fire alarm device(s) Delays to outputs Total loss of the power supply Test condition LPCB Ref. No.
This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Available in the following language variants: 01 Dutch, 02 French, 03 English (UK), 04 German, 05 Norwegian, 06 Swedish, 07 Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20 Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28 Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 French International, 45 Romanian, 71 Catalan, 99 - English (International) 092v/02
1X-F4
Conventional four zone control and indicating equipment Incorporating the following units: 1X-F4-MB Main control board 2010-1-RB Optional relay board 2010-1-SB Optional expander I/O board 2010-PS-20 2A Power Supply Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.11 8.4 10 Notes: 1. 2. Output to fire alarm device(s) Output to fire alarm routing equipment Delays to outputs Total loss of the power supply Test condition This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Available with the following language kits: 01 Dutch, 02 French, 03 English (UK), 04 German, 05 Norwegian, 06 Swedish, 07 Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20 Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28 Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 French International, 45 Romanian, 71 Catalan, 99 - English (International)
1X-F4-NL
Conventional four zone control and indicating equipment with alarm counter Incorporating the following units: 1X-F4-MB Main control board 2010-1-RB Optional relay board 2010-1-SB Optional expander I/O board 2010-PS-20 2A Power Supply 2010-1-AC Alarm Counter Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.11 7.13 8.4 10 Notes: 1. 2. Output to fire alarm device(s) Output to fire alarm routing equipment Delays to outputs Alarm counter Total loss of the power supply Test condition
092v/02
This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Available with the following language kits: 01 Dutch, 02 French, 03 English (UK), 04 German, 05 Norwegian, 06 Swedish, 07 Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20 Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28 Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 French International, 45 Romanian, 71 Catalan, 99 - English (International)
108
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 1X-F4-SC Conventional four zone control and indicating equipment with Scandinavian key switch Incorporating the following units: 1X-F4-MB Main control board 2010-1-RB Optional relay board 2010-1-SB Optional expander I/O board 2010-PS-20 2A Power Supply 2010-SK Scandinavian Key Lock and Key Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.11 8.4 10 Notes: 1. 2. Output to fire alarm device(s) Output to fire alarm routing equipment Delays to outputs Total loss of the power supply Test condition LPCB Ref. No. 092v/02
This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Available with the following language kits: 01 Dutch, 02 French, 03 English (UK), 04 German, 05 Norwegian, 06 Swedish, 07 Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20 Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28 Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 French International, 45 Romanian, 71 Catalan, 99 - English (International) 092v/03
1X-F8
Conventional eight zone control and indicating equipment Incorporating the following units: 1X-F8-MB Main control board 2010-1-RB Optional relay board 2010-1-SB Optional expander I/O board 2010-PS-40 4A Power Supply Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.11 8.4 10 Notes: 1. 2. Output to fire alarm device(s) Output to fire alarm routing equipment Delays to outputs Total loss of the power supply Test condition
This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Available with the following language kits: 01 Dutch, 02 French, 03 English (UK), 04 German, 05 Norwegian, 06 Swedish, 07 Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20 Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28 Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 French International, 45 Romanian, 71 Catalan, 99 - English (International) 092v/03
1X-F8-NL
Conventional eight zone control and indicating equipment with alarm counter Incorporating the following units: 1X-F8-MB Main control board 2010-1-RB Optional relay board 2010-1-SB Optional expander I/O board 2010-PS-40 4A Power Supply 2010-1-AC Alarm Counter Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.11 7.13 8.4 10 Notes: 1. Output to fire alarm device(s) Output to fire alarm routing equipment Delays to outputs Alarm counter Total loss of the power supply Test condition
This product approval does not constitute compliance with the fire detection
12 Sep 2011
109
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products and alarm systems requirements of EN 54-13. Available with the following language kits: 01 Dutch, 02 French, 03 English (UK), 04 German, 05 Norwegian, 06 Swedish, 07 Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20 Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28 Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 French International, 45 Romanian, 71 Catalan, 99 - English (International) 092v/03 LPCB Ref. No. 2.
1X-F8-SC
Conventional eight zone control and indicating equipment with Scandinavian key switch Incorporating the following units: 1X-F8-MB Main control board 2010-1-RB Optional relay board 2010-1-SB Optional expander I/O board 2010-PS-40 4A Power Supply 2010-SK Scandinavian Key Lock and Key Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.11 8.4 10 Notes: 1. 2. Output to fire alarm device(s) Output to fire alarm routing equipment Delays to outputs Total loss of the power supply Test condition
This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Available with the following language kits: 01 Dutch, 02 French, 03 English (UK), 04 German, 05 Norwegian, 06 Swedish, 07 Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20 Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28 Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 French International, 45 Romanian, 71 Catalan, 99 - English (International) 092v/04
1X-E4
Conventional four zone control and indicating equipment with evacuation zones Incorporating the following units: 1X-E4-MB Main control board 2010-1-RB Optional relay board 2010-1-SB Optional expander I/O board 2010-PS-40 4A Power Supply Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.11 8.4 10 Notes: 1. 2. Output to fire alarm device(s) Output to fire alarm routing equipment Delays to outputs Total loss of the power supply Test condition
This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Available with the following language kits: 01 Dutch, 02 French, 03 English (UK), 04 German, 05 Norwegian, 06 Swedish, 07 Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20 Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28 Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 French International, 45 Romanian, 71 Catalan, 99 - English (International) 092v/04
1X-E4-NL
Conventional four zone control and indicating equipment with evacuation zones and alarm counter Incorporating the following units: 1X-E4-MB Main control board 2010-1-RB Optional relay board 2010-1-SB Optional expander I/O board 2010-PS-40 4A Power Supply 2010-1-AC Alarm Counter
110
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.11 7.13 8.4 10 Notes: 1. 2. Output to fire alarm device(s) Output to fire alarm routing equipment Delays to outputs Alarm counter Total loss of the power supply Test condition LPCB Ref. No.
This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Available with the following language kits: 01 Dutch, 02 French, 03 English (UK), 04 German, 05 Norwegian, 06 Swedish, 07 Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20 Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28 Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 French International, 45 Romanian, 71 Catalan, 99 - English (International) 092v/05
2X-F1
1 Loop intelligent analogue addressable control and indicating equipment Incorporating the following units: 2010-2-F1-MB Main control board 2X-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board 2-Loop Node Card Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/05 Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-F1-FB
1 Loop intelligent analogue addressable control and indicating equipment with fire alarm routing output Incorporating the following units: 2010-2-F1-MB Main control board 2X-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-232-IB Network board Interface Board for External Printer
12 Sep 2011
111
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 2010-2-LB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Loop expansion board 20 zone LED indication board 40 zone LED indication board UK mains cable LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/05 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Type A, B and C) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-F1-SC
1 Loop intelligent analogue addressable control and indicating equipment with Scandinavian key switch Incorporating the following units: 2010-2-F1-MB 2X-UI-SC controls 2010-2-PS-40 and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 2010-SK Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable Scandinavian key and lock assembly Main control board User interface control board with fire routing 4A Power Supply
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Type A, B and C) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
112
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 2 Loop intelligent analogue addressable control and indicating equipment Incorporating the following units: 2010-2-F2-MB Main control board 2X-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable LPCB Ref. No.
2X-F2
092v/06
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available in the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/06 Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-F2-FB
2 Loop intelligent analogue addressable control and indicating equipment with fire alarm routing output Incorporating the following units: 2010-2-F2-MB Main control board 2X-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter
12 Sep 2011
113
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/06 Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
2X-F2-SC
2 loop intelligent analogue addressable control and indicating equipment with Scandinavian key switch Incorporating the following units: 2010-2-F2-MB Main control board 2X-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 2010-SK Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable Scandinavian key and lock assembly
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/07 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-F1-S
1 Loop intelligent analogue addressable fire control panel in small cabinet Incorporating the following units: 2010-2-F1-MB Main control board 2X-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB Network board Loop expansion board Interface board for external printer
114
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 2X-ZI-24 2010-2-PS-C2 24 zone LED indication board UK mains cable LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 1 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output in small cabinet Incorporating the following units: 2010-2-F1-MB Main control board 2X-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable 1. Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-F1-FB-S
092v/08
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 - Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 - Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 - Catalan, 99 English (International) 092v/09 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-F1-SC-S
1 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output and Scandinavian key in small cabinet
12 Sep 2011
115
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Incorporating the following units: 2010-2-F1-MB Main control board 2X-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 2010-SK Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable Scandinavian key and lock assembly LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/10 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-F2-S
2 Loop intelligent analogue addressable fire control panel in small cabinet Incorporating the following units: 2010-2-F2-MB Main control board 2X-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
116
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 2X-F2-FB-S 2 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output in small cabinet Incorporating the following units: 2010-2-F2-MB Main control board 2X-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable 092v/11 LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 - Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 Estonian, 31 - Latvian, 32 - Belgian French, 36 - French International, 45 Romanian, 71 - Catalan, 99 - English (International) 2X-F2-SC-S 2 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output and Scandinavian key Incorporating the following units: 2010-2-F2-MB 2X-UI-SC 2010-2-PS-40 2010-SK and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable Main control board User interface control board with fire routing controls 4A Power Supply Scandinavian key and lock assembly 092v/12 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment
12 Sep 2011
117
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/R01 Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
2X-FR
Addressable Fire Panel Repeater Incorporating the following option with requirements: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with Output to Fire Routing Equipment Incorporating the following option with requirements: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with Scandinavian Key Incorporating the following option with requirements: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater in small cabinet Incorporating the following option with requirements: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with fire routing equipment output and Scandinavian key in small cabinet Incorporating the following option with requirements: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with fire alarm routing equipment output in small cabinet Incorporating the following option with requirements:
2X-FR-FB
092v/R02
2X-FR-SC
092v/R03
2X-FR-S
092v/R04
2X-FR-SC-S
092v/R05
2X-FR-FB-S
092v/R06
118
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.13 8.4 8.9 9.5 10 Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
12 Sep 2011
119
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 3-CAB7D(R)-E Door for 7 Slot Cabinet, (R) indicates red 3-CAB14D(R)-E Door for 14 Slot Cabinet, (R) indicates red 3-CAB21D(R)-E Door for 21 Slot Cabinet, (R) indicates red 3-RCC7R-E Small Remote Battery Cabinet 3-RCC14R-E Medium Remote Battery Cabinet 3-RCC21R-E Large Remote Battery Cabinet 3-LCD Liquid Crystal Display, user interface 3-BATSEN-E Remote battery cabinet interface, temperature sensing 3-BATSEN Remote battery cabinet interface 3-BATS Battery Shelf 3-RS485A Data Communication, Class A 3-RS485B Data Communication, Class B 3-RS232 Serial Communications Card (Printer, etc) 3-PSMON Primary Power Supply Monitor 3-IDC8/4 Initiating Device Circuits/NACS 3-24R 24, Red 3-24Y 24, Yellow 3-24G 24, Green 3-12RY Red-over-yellow pairs 3-12SR 12 Switches. Red 3-12SY 12 Switches. Yellow 3-12SG 12 Switches. Green 3-12/S1GY 12 Switches. Green over-yellow pairs 3-12/S1RY 12 Switches. Red over-yellow pairs 3-12/S2Y 24, Yellow, 12 Switches 3-12/S2R 24, Red, 12 Switches 3-6/3S1G2Y Green-over-yellow-over-yellow triads, 6 triads 3-6/3S1GYR Green-over-yellow-over-red triads, 6 triads 3-6/3S2RY Red-over-yellow-over-red triads, 6 triads 3-BBCMON Booster, Battery Charger Monitor 3-BPSMON Booster Power supply Monitor 3-LDSM Annunciator strip support module 3-LRMF Local Rail Module Filler 3-FTCU MB Fire fighter Telephone Control Unit MB. 3-FTCU-E Fire fighter Telephone Control Unit Display. 3-REMICP Remote Microphone, Panel. 3-RCIC ASU Interconnect power and rail communication unit LPCB Ref. No.
Unbranded - 2X
Certificated Products 2X-F1 1 Loop intelligent analogue addressable control and indicating equipment Incorporating the following units: 2010-2-F1-MB Main control board 2X-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board 2-Loop Node Card Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable LPCB Ref. No. 092v/05
120
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 1 Loop intelligent analogue addressable control and indicating equipment with fire alarm routing output Incorporating the following units: 2010-2-F1-MB Main control board 2X-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-232-IB 2010-2-LB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board Interface Board for External Printer Loop expansion board 20 zone LED indication board 40 zone LED indication board UK mains cable 1. Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
2X-F1-FB
092v/05
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/05 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Type A, B and C) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-F1-SC
1 Loop intelligent analogue addressable control and indicating equipment with Scandinavian key switch Incorporating the following units: 2010-2-F1-MB Main control board 2X-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply
12 Sep 2011
121
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 2010-SK Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable Scandinavian key and lock assembly LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/06 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Type A, B and C) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-F2
2 Loop intelligent analogue addressable control and indicating equipment Incorporating the following units: 2010-2-F2-MB Main control board 2X-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available in the following language variants: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
122
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 2X-F2-FB 2 Loop intelligent analogue addressable control and indicating equipment Incorporating the following units: 2010-2-F2-MB Main control board 2X-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable 092v/06 LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available in the following language variants: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/06 Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-F2-SC
2 Loop intelligent analogue addressable control and indicating equipment with Scandinavian key switch Incorporating the following units: 2010-2-F2-MB Main control board 2X-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 2010-SK Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable Scandinavian key and lock assembly
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment
12 Sep 2011
123
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/07 Disablement of addressable points Test condition LPCB Ref. No.
2X-F1-S
1 Loop intelligent analogue addressable fire control panel in small cabinet Incorporating the following units: 2010-2-F1-MB Main control board 2X-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/08
2X-F1-FB-S
1 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output in small cabinet Incorporating the following units: 2010-2-F1-MB Main control board 2X-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable
124
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/09 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
2X-F1-SC-S
1 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output and Scandinavian key in small cabinet Incorporating the following units: 2010-2-F1-MB Main control board 2X-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 2010-SK Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable Scandinavian key and lock assembly
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/10 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-F2-S
2 Loop intelligent analogue addressable fire control panel in small cabinet Incorporating the following units:
12 Sep 2011
125
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 2010-2-F2-MB 2X-UI 2010-2-PS-40 and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Main control board User interface control board 4A Power Supply Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/11 Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-F2-FB-S
2 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output in small cabinet Incorporating the following units: 2010-2-F2-MB Main control board 2X-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
126
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 2X-F2-SC-S 2 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output and Scandinavian key Incorporating the following units: 2010-2-F2-MB Main control board 2X-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply 2010-SK Scandinavian key and lock assembly and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable 092v/12 LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 2X-FR Addressable Fire Panel Repeater Incorporating the following options with requirements from EN 54-2: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with Output to Fire Routing Equipment Incorporating the following options with requirements from EN 54-2: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater in small cabinet Incorporating the following options with requirements from EN 54-2: 092v/R01 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
2X-FR-FB
092v/R02
2X-FR-S
092v/R03
12 Sep 2011
127
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with Scandinavian Key Incorporating the following options with requirements from EN 54-2: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with fire routing equipment output and Scandinavian key in small cabinet Incorporating the following options with requirements from EN 54-2: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with fire alarm routing equipment output in small cabinet Incorporating the following options with requirements from EN 54-2: 7.13 8.4 8.9 9.5 10 Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
2X-FR-SC
092v/R03
2X-FR-SC-S
092v/R05
2X-FR-FB-S
092v/R06
Certificate No: 092v-(cl-2) to EN54-2: 1997 + A1: 2006 and EN54-4: 1997 + A1: 2002 + A2: 2006
Aritech - KFP
Certificated Products KFP-AF1 1 Loop intelligent analogue addressable control and indicating equipment Incorporating the following units: 2010-2-F1-MB Main control board KFP-A-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board 2-Loop Node Card Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable LPCB Ref. No. 092v/05
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
128
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/05 LPCB Ref. No.
KFP-AF1-FB
1 Loop intelligent analogue addressable control and indicating equipment with fire alarm routing output Incorporating the following units: 2010-2-F1-MB Main control board KFP-A-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-232-IB 2010-2-LB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board Interface Board for External Printer Loop expansion board 20 zone LED indication board 40 zone LED indication board UK mains cable
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/05 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Type A, B and C) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
KFP-AF1-SC
1 Loop intelligent analogue addressable control and indicating equipment with Scandinavian key switch Incorporating the following units: 2010-2-F1-MB Main control board KFP-A-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 2010-SK Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable Scandinavian key and lock assembly
12 Sep 2011
129
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/06 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Type A, B and C) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
KFP-AF2
2 Loop intelligent analogue addressable control and indicating equipment Incorporating the following units: 2010-2-F2-MB Main control board KFP-A-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available in the following language variants: 01 Dutch, 02 French, 03 English (UK), 04 German, 05 Norwegian, 06 Swedish, 07 Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20 Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28 Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 French International, 45 Romanian, 71 Catalan, 99 - English (International) 092v/06 Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
KFP-AF2-FB
2 Loop intelligent analogue addressable control and indicating equipment with fire alarm routing output Incorporating the following units: 2010-2-F2-MB Main control board
130
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products KFP-A-UI-FB 2010-2-PS-40 and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable User interface control board with fire routing controls 4A Power Supply LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 Dutch, 02 French, 03 English (UK), 04 German, 05 Norwegian, 06 Swedish, 07 Danish, 09 Spanish, 10 Italian,11 Belgian, Dutch, 15 Arabic, 18 Polish, 19 Turkish, 20 Czech, 21 Portuguese, 22 Hungarian, 24 Slovakian, 25 Russian, 27- Lithuanian, 28 Finish, 30 Estonian, 31 Latvian, 32 - Belgian French, 36 French International, 45 Romanian, 71 Catalan, 99 - English (International) 092v/06 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
KFP-AF2-SC
2 Loop intelligent analogue addressable control and indicating equipment with Scandinavian key switch Incorporating the following units: 2010-2-F2-MB Main control board KFP-A-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 2010-SK Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable Scandinavian key and lock assembly
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
12 Sep 2011
131
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/07 LPCB Ref. No.
KFP-AF1-S
1 Loop intelligent analogue addressable fire control panel in small cabinet Incorporating the following units: 2010-2-F1-MB Main control board KFP-A-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/08
KFP-AF1-FB-S
1 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output in small cabinet Incorporating the following units: 2010-2-F1-MB Main control board KFP-A-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C)
132
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/09 Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
KFP-AF1-SC-S
1 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output and Scandinavian key in small cabinet Incorporating the following units: 2010-2-F1-MB Main control board KFP-A-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 2010-SK Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable Scandinavian key and lock assembly
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/10 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
KFP-AF2-S
2 Loop intelligent analogue addressable fire control panel in small cabinet Incorporating the following units: 2010-2-F2-MB Main control board KFP-A-UI User interface control board 2010-2-PS-40 4A Power Supply
12 Sep 2011
133
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. 2. 3. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. Scope of approval does not include the operation of the network functionality. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) 092v/11 Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
KFP-AF2-FB-S
2 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output in small cabinet Incorporating the following units: 2010-2-F2-MB Main control board KFP-A-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
134
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Catalan, 99 - English (International) KFP-AF2-SC-S 2 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output and Scandinavian key Incorporating the following units: 2010-2-F2-MB Main control board KFP-A-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply 2010-SK Scandinavian key and lock assembly and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable 092v/12 LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) KFP-AFR Addressable Fire Panel Repeater Incorporating the following options with requirements from EN 54-2: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with Output to Fire Routing Equipment Incorporating the following options with requirements from EN 54-2: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with Scandinavian Key Incorporating the following options with requirements from EN 54-2: 7.13 8.4 8.9 Alarm counter Total loss of the power supply Output to fault warning routing equipment 092v/R01 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
KFP-AFR-FB
092v/R02
KFP-AFR-SC
092v/R03
12 Sep 2011
135
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater in small cabinet Incorporating the following options with requirements from EN 54-2: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with fire routing equipment output and Scandinavian key in small cabinet Incorporating the following options with requirements from EN 54-2: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with fire alarm routing equipment output in small cabinet Incorporating the following options with requirements from EN 54-2: 7.13 8.4 8.9 9.5 10 Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No. 092v/R04
KFP-AFR-S
KFP-AFR-SC-S
092v/R05
KFP-AFR-FB-S
092v/R06
Certificate No: 092v-(cl-2) to EN54-2: 1997 + A1: 2006 and EN54-4: 1997 + A1: 2002 + A2: 2006
Ziton - ZP2
Certificated Products ZP2-F1 1 Loop intelligent analogue addressable control and indicating equipment Incorporating the following units: 2010-2-F1-MB Main control board ZP-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board 2-Loop Node Card Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable LPCB Ref. No. 092v/05
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
136
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) ZP2-F1-FB 1 Loop intelligent analogue addressable control and indicating equipment with fire alarm routing output Incorporating the following units: 2010-2-F1-MB Main control board ZP2-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-232-IB 2010-2-LB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board Interface Board for External Printer Loop expansion board 20 zone LED indication board 40 zone LED indication board UK mains cable 092v/05 LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) ZP2-F1-SC 1 Loop intelligent analogue addressable control and indicating equipment with Scandinavian key switch Incorporating the following units: 2010-2-F1-MB Main control board ZP2-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 2010-SK Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable Scandinavian key and lock assembly 092v/05 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Type A, B and C) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
12 Sep 2011
137
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) ZP2-F2 2 Loop intelligent analogue addressable control and indicating equipment Incorporating the following units: 2010-2-F2-MB Main control board ZP-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable 092v/06 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Type A, B and C) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available in the following language variants: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) ZP2-F2-FB 2 Loop intelligent analogue addressable control and indicating equipment with fire alarm routing output Incorporating the following units: 2010-2-F2-MB Main control board ZP2-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply 092v/06 Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Type A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
138
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) ZP2-F2-SC 2 Loop intelligent analogue addressable control and indicating equipment with Scandinavian key switch Incorporating the following units: 2010-2-F2-MB Main control board ZP2-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-20 2X-ZI-40 2010-2-PS-C2 2010-SK Network board Loop expansion board Interface Board for External Printer 20 zone LED indication board 40 zone LED indication board UK mains cable Scandinavian key and lock assembly 092v/06 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
12 Sep 2011
139
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) ZP2-F1-S 1 Loop intelligent analogue addressable fire control panel in small cabinet Incorporating the following units: 2010-2-F1-MB Main control board ZP-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB Network board 2010-2-LB Loop expansion board 2010-2-232-IB Interface board for external printer 2X-ZI-24 24 zone LED indication board 2010-2-PS-C2 UK mains cable Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition 092v/07 LPCB Ref. No.
Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) ZP2-F1-FB-S 1 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output in small cabinet Incorporating the following units: 2010-2-F1-MB Main control board ZP2-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable 092v/08
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply
140
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) ZP2-F1-SC-S 1 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output and Scandinavian key in small cabinet Incorporating the following units: 2010-2-F1-MB Main control board ZP2-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 2010-SK Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable Scandinavian key and lock assembly 092v/09 Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) ZP2-F2-S 2 Loop intelligent analogue addressable fire control panel in small cabinet Incorporating the following units: 2010-2-F2-MB Main control board ZP-UI User interface control board 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 Network board Loop expansion board Interface board for external printer 24 zone LED indication board 092v/10 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
12 Sep 2011
141
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 2010-2-PS-C2 UK mains cable LPCB Ref. No. Certified with the following options with requirements from EN 54-2: 7.8 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) ZP2-F2-FB-S 2 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output in small cabinet Incorporating the following units: 2010-2-F2-MB Main control board ZP2-UI-FB User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable 092v/11 Output to fire alarm device(s) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) ZP2-F2-SC-S 2 Loop intelligent analogue addressable fire control panel with fire alarm routing equipment output and Scandinavian key 092v/12 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
142
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Incorporating the following units: 2010-2-F2-MB Main control board ZP2-UI-SC User interface control board with fire routing controls 2010-2-PS-40 4A Power Supply 2010-SK Scandinavian key and lock assembly and as optional modules: 2010-2-NB 2010-2-LB 2010-2-232-IB 2X-ZI-24 2010-2-PS-C2 Network board Loop expansion board Interface board for external printer 24 zone LED indication board UK mains cable LPCB Ref. No.
Certified with the following options with requirements from EN 54-2: 7.8 7.9.1 7.9.2 7.10 7.11 7.12 7.13 8.4 8.9 9.5 10 Notes: 1. This product approval does not constitute compliance with the fire detection and alarm systems requirements of EN 54-13. 2. Scope of approval does not include the operation of the network functionality. 3. Available with the following language kits: 01 - Dutch, 02 - French, 03 - English (UK), 04 - German, 05 - Norwegian, 06 Swedish, 07 - Danish, 09 - Spanish, 10 - Italian,11 - Belgian, Dutch, 15 Arabic, 18 - Polish, 19 - Turkish, 20 - Czech, 21 - Portuguese, 22 - Hungarian, 24 - Slovakian, 25 - Russian, 27- Lithuanian, 28 - Finish, 30 - Estonian, 31 Latvian, 32 - Belgian French, 36 - French International, 45 - Romanian, 71 Catalan, 99 - English (International) ZP2-FR Addressable Fire Panel Repeater Incorporating the following options with requirements from EN 54-2: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with Output to Fire Routing Equipment Incorporating the following options with requirements from EN 54-2: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with Scandinavian Key Incorporating the following options with requirements from EN 54-2: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater in small cabinet Incorporating the following options with requirements from EN 54-2: 092v/R01 Output to fire alarm device(s) Output to fire alarm routing equipment Alarm confirmation input from fire alarm routing equipment Output to fire protection equipment (Types A, B and C) Delays to outputs Dependencies on more than one alarm signal (Types A, B and C) Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition
ZP2-FR-FB
092v/R02
ZP2-FR-SC
092v/R03
ZP2-FR-S
092v/R04
12 Sep 2011
143
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with fire routing equipment output and Scandinavian key in small cabinet Incorporating the following options with requirements from EN 54-2: 7.13 Alarm counter 8.4 Total loss of the power supply 8.9 Output to fault warning routing equipment 9.5 Disablement of addressable points 10 Test condition Addressable Fire Panel Repeater with fire alarm routing equipment output in small cabinet Incorporating the following options with requirements from EN 54-2: 7.13 8.4 8.9 9.5 10 Alarm counter Total loss of the power supply Output to fault warning routing equipment Disablement of addressable points Test condition LPCB Ref. No.
ZP2-FR-SC-S
092v/R05
ZP2-FR-FB-S
092v/R06
144
12 Sep 2011
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Certified with the following options with requirements from EN 54: Part 2: 7.8 Output to fire alarm devices 7.11 Delays to the actioning of outputs 10 Test condition 2 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface (option) Certified with the following options from EN 54: Part 2 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 4 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface (option) Certified with the following options from EN 54: Part 2 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 8 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface (option) Certified with the following options from EN 54: Part 2 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 16 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface (option) Certified with the following options from EN 54: Part 2 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 32 zone conventional control and indicating equipment Incorporating as modular units: C1627 Mother board C1629 Display board C1632 16 Zone expansion board C1652 5A Power Supply board C1631 Repeater interface (option) Certified with the following options from EN 54: Part 2 7.8 Output to fire alarm devices 7.9 Output to fire routing equipment 7.10 Output to automatic fire protection equipment 7.11 Delays to outputs 8.9 Output to fault warning equipment 10 Test condition 8 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface 16 zone conventional repeater unit LPCB Ref. No.
Premier MX
330d/06
Premier MX 4
330d/07
Premier MX 8
330d/08
Premier MX 16
330d/09
Premier MX 32
330d/10
Premier MX Repeater 8
330d/R01
Premier MX Repeater 16
330d/R02
12 Sep 2011
145
PART 1: SECTION 3
CONTROL AND INDICATING EQUIPMENT
Certificated Products Incorporating as modular units: C1627 Mother board C1628 Display board C1631 Repeater interface 32 zone conventional repeater unit Incorporating as modular units: C1627 Mother board C1629 Display board C1631 Repeater interface LPCB Ref. No.
Premier MX Repeater 32
330d/R03
Certificate No: 018c to EN 54-2 and 4:1997 Certificated Products Prem1er AL 4 loop analogue addressable control and indicating equipment Incorporating: A1579 Motherboard A1580 Display board A1585 Loop cards A1584 230V AC power supply control card A1599 Printer board Certified with the following options from EN 54-2: 1997 7.8 Output to fire alarm devices 7.11 Delays to outputs 8.3 Fault signals from points 9.5 Disablement of addressable points 10 Test condition LPCB Ref. No. 018c/01
146
12 Sep 2011
There are other factors to be taken into account such as architecture of the building, ease of maintenance and cost. Guidance on the selection of appropriate types of detectors should be sought from the applicable installation rule or code of practice (e.g. BS 5839-1). Where a particular type of detector is not covered by the installation rule or code of practice then guidance should be sought from the manufacturers literature. In any case, account should be given to the notes or limitations given with the listed detector in this section. This section lists fire detectors approved for use in fire detection and fire alarm systems in buildings. The initial approval and continued approval processes for detectors are outlined in scheme document SD021. The list includes detectors certified to recognised standards or to special test schedules which are developed by LPCB for detector types where suitable standards are not available or were not available at the time of the evaluation. Products listed in this section have been approved to: EN 54-5: 2000 Heat detectors - point detectors EN 54-5: 2000 + A1: 2002 Heat detectors - point detectors EN 54-7: 2000 Smoke detectors - point detectors using scattered light, transmitted light or ionisation EN 54-7 :2000 +A1: 2002 and A2: 2006 Smoke detectors - point detectors using scattered light, transmitted light or ionisation EN 54-10: 2002 Flame detectors - point detectors EN 54-10: 2002 + A1: 2005 Flame detectors - point detectors EN 54-12: 2002 Smoke detectors - line detectors using an optical light beam EN 54-20: 2006 Aspirating smoke detectors ISO7240-5: 2003 Point -type heat detectors ISO7240-6: 2004 Carbon monoxide fire detectors using electro-chemical cells ISO7240-7: 2003 Point-type smoke detectors using scattered light, transmitted light or ionization ISO7240-12: 2005 Line type smoke detectors using transmitting light beam ISO7240-15: 2004 Multisensor fire detectors ISO 7240-6: 2008 Carbon monoxide fire detectors using electro-chemical cells and heat sensors. CEA 4021: 1999 Requirements and test methods for multisensor detectors, which respond to smoke and heat, and smoke detectors with more than one smoke sensor CEA 4021: 2003 Requirements and test methods for multisensor detectors, which respond to smoke and heat, and smoke detectors with more than one smoke sensor LPS 1265-1.1: 2005 Requirements and Testing Procedures for the LPCB Approval and Listing of Carbon Monoxide Fire Detectors Using Electrochemical Cells LPS 1274-1.0: 2005 Testing Procedures for the LPCB Approval and Listing of Carbon Monoxide / Heat Multisensor Fire Detectors Using Electrochemical Cells LPS 1279: 2006 Testing Procedures for the LPCB Approval and Listing of Point Multisensor Fire Detectors using Optical or Ionization Smoke Sensors and Electrochemical Cell CO Sensors and, optionally, Heat Sensors
Approval can also be obtained for other detection principles not detailed above. In such circumstances, LPCB can develop test criteria to evaluate products, which in time may be used for the development of standards. Audit:
12 Sep 2011
147
ADI International
ADI International Espana, C/Vivero 5, 28040 Madrid, Spain Tel: +34 91 102 590 Fax: +34 91 535 0081 E-mail: alvazquez@ademco.es Website: www.ademco.es
Certificate No: 199w to EN 54-12: 2002 and EN 54-17: 2005 Certificate No: 199u to EN 54-12: 2002
Beam Detectors
Certificated Products 8200R Conventional optical beam detector Note: 1. Meets the requirements for EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 & Acclimate levels 1 & 2 Conventional optical beam detector with self test facility Note: 1. Meets the requirements for EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 & Acclimate levels 1 & 2 Analogue optical beam detector with short circuit isolator feature LPCB Ref. No. 199u/01
8200RS
199u/02
8200
199w/01
148
12 Sep 2011
Certificate No: 199p to EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-5: 2000 + A1: 2002 and CEA 4021: 2003
Multi-Criteria Detectors
Certificated Products 2610TEM Conventional optical/thermal smoke & heat detector (B401, B401DG, B401R, B401SD and B401RSD bases) Note: Meets the requirements of EN 54-5: 2000 at class A1R and EN 54-7: 2000 at High, Medium and Low. LPCB Ref. No. 199p/03
Standard base Deep base Standard Base with 470 ohm resistor Standard base with 470 ohm resistor and schottky diode
Smoke Detectors
Certificated Products 2610EC Conventional photoelectric detector (B401, B401DG, B401R, B401SD and B401RSD bases) Note: Meets EN 54-7:2000 with low, medium and high sensitivities LPCB Ref. No. 199m/03
Bases: B401 Standard base B401DG Deep base B401R Standard base with 470 ohm resistor B401SD Standard base with schottky diode B401RSD Standard base with 470 ohm resistor and schottky diode
Heat Detectors
Certificated Products 3610EC 4610EC class A1R conventional rate of rise heat detector (B401, B401DG, B401R and B401RSD bases) class BS conventional heat detector (B401, B401DG, B401R, B401SD and B401RSD bases) LPCB Ref. No. 199n/07 199n/08
Standard base Deep base Standard Base with 470 ohm resistor Standard Base with schottky diode Standard base with 470 ohm resistor and schottky diode
12 Sep 2011
149
20-AS3500-ADV
928d/02
20-AS1000-ADV
928e/02
Bases 20-AB100-ADV Mounting base 20-VB100-ADV Mounting base (with link resistor) 20-ABR100-ADV Universal adaptor base with resistor 20-ABDR100-ADV Universal adaptor base with resistor and Schottky diode 20-ABS100-ADV Deep adaptor base 20-ABSR100-ADV Deep adaptor base with resistor 20-ABSRD100-ADV Deep adaptor base with resistor and Schottky diode
Certificate No: 928b-(cl-5) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54 -17: 2005 Certificate No: 928e-(cl-5) to EN 54-7: 2000 + A1: 2002 + A2: 2006
20-LV100-ADV
928e/01
20-AS1000-ADV
928e/02
150
12 Sep 2011
Certificate No: 928c-(cl-5) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54 -17: 2005 & CEA4021: 2003 Certificate No: 928f-(cl-5) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003
Multi-sensor detectors
Certificated Products 20-V200-ADV Analogue addressable Class P heat and photoelectric smoke multi-sensor detector with short circuit isolator (20-AB100-ADV base) Notes 1. LPCB Ref. No. 928c/01
2. 3.
Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi criteria level 1 (most sensitive) - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 2 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 3 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 4 (least sensitive) - thermally enhanced smoke detection with Class A1 heat response Meets the requirements of EN 54-5 (Class A1R) at the following settings: Class A1R heat only response Meets the requirements of EN 54-7 at the following settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low 928f/01
20-LV200-ADV
Analogue addressable photo thermal multisensor (20-VB100-ADV and 20-AB100-ADV bases) Notes 1.
2. 3.
Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi criteria level 1 (most sensitive) - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 2 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 3 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 4 (least sensitive) - thermally enhanced smoke detection with Class A1 heat response Meets the requirements of EN 54-5 (Class A1R) at the following settings: Class A1R heat only response Meets the requirements of EN 54-7 at the following settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low
Bases 20-AB100-ADV Mounting base 20-VB100-ADV Mounting base (with link resistor)
12 Sep 2011
151
AT120AS AT120CM
928d/01 928d/02
Certificate No: 928b-(cl-3) to 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54 -17: 2005 Certificate No: 928e-(cl-3) to EN 54-7: 2000 + A1: 2002 + A2: 2006
AT110AS
928e/01
928e/02
Certificate No: 928c-(cl-3) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54 -17: 2005 & CEA4021: 2003 Certificate No: 928f-(cl-3) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003
Multi-sensor Detectors
Certificated Products AT130A Analogue addressable Class P heat and photoelectric smoke multi-sensor detector with short circuit isolator (BA100 base) LPCB Ref. No. 928c/01
152
12 Sep 2011
2. 3.
Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi criteria level 1 (most sensitive) - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 2 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 3 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 4 (least sensitive) - thermally enhanced smoke detection with Class A1 heat response Meets the requirements of EN 54-5 (Class A1R) at the following settings: Class A1R heat only response Meets the requirements of EN 54-7 at the following settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low 928f/01
AT130AS
2. 3.
Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi criteria level 1 (most sensitive) - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 2 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 3 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 4 (least sensitive) - thermally enhanced smoke detection with Class A1 heat response Meets the requirements of EN 54-5 (Class A1R) at the following settings: Class A1R heat only response Meets the requirements of EN 54-7 at the following settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low
Bases: P/N854001 4-Wire detector base Certificate No: 512a-(cl-2) to EN 54-7: 2000
12 Sep 2011
153
Bases: P/N854001 4-Wire detector base Certificate No: 512b-(cl-1) to EN54-5:2000, EN54-7:2000 & CEA 4021:1999
Multi-criteria Detectors
Certificated Products AE/C5-OPT Conventional 2 wire photoelectric smoke and heat detector with remote LED output (P/N854001 base) LPCB Ref. No. 512b/02
Smoke Detectors
Certificated Products EA318-2 EA318-2L Conventional 2 wire photoelectric smoke detector (P/N852001 base) Conventional 2 wire photoelectric smoke detector with remote LED output (E300-Base) LPCB Ref. No. 512/01 512a/02
Bases: E300-Base 4-wire detector base P/N852001 2-wire detector base Certificate No: 512d to EN 54-5: 2000
Heat Detectors
Certificated Products EA323-2 EA323-2L/A2R Conventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detector (P/N852001 base) Conventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detector with LED output (E300-Base) LPCB Ref. No. 512d/02 512d/04
154
12 Sep 2011
Sales Enquiries Spain, Apollo Espana Tel: +34 627 988 061 Fax: +34 949 335 289 E-mail: apollo.espana@apollo-fire.com
Sales Enquiries China, Apollo Fire Detectors Limited, Shanghai representative office Tel: +86 21 5237 0922 Fax: +86 21 5237 0920 E-mail: tony.ye@apollo-fire.com
Certificate No: 010p to EN 54: Part 5: 2000 Certificate No: 010r to EN 54: Part 5: 2000 Certificate No: 010ab to EN 54-5: 2000 + A1: 2002
XPA-HT-11171-APO
010ab/02
12 Sep 2011
155
55000-121 Series 65
010p/05
55000-122 Series 65
010p/06
55000-125 Series 65
010p/07
55000-126 Series 65
010p/08
55000-127 Series 65
010p/09
55000-130 Series 65
010p/10
55000-131 Series 65
010p/11
55000-132 Series 65
010p/12
55000-135 Series 65
010p/13
55000-136 Series 65
010p/14
55000-137 Series 65
010p/15
55000-400 XP95
010p/20
55000-401 XP95
010p/21
55000-420 XP95
010p/22
010p/23 010r/01
156
12 Sep 2011
010r/02
Orbis Class BR
010r/03
Orbis Class BS
010r/04
Orbis Class CR
010r/05
12 Sep 2011
157
Orbis Class CS
010r/06
010r/07
010r/08
010r/09
Orbis IS Class BR
010r/10
Orbis IS Class BS
010r/11
Orbis IS Class CR
010r/12
158
12 Sep 2011
010r/14
Certificate No: 010q to EN 54: Part 7: 2000 Certificate No: 010s to EN 54: Part 7: 2000 Certificate No: 010ac to EN 54-7: 2000 + A1: 2002
010q/01 010q/02
12 Sep 2011
159
58000-600 Discovery
55000-215 Series 65
010q/04
55000-219 Series 65
010q/08
55000-220 Series 65
010q/09
55000-315 Series 65
010q/10
55000-520 XP95
010q/17
55000-600 XP95
010q/18
55000-620 XP95
010q/19
55000-560 XP95
010q/20
55000-660 XP95
010q/21
55000-640 XP95 IS
010q/22
160
12 Sep 2011
Orbis IS
010s/02
12 Sep 2011
161
58000-700 Discovery
010h/01
55000-885 XP95
010m/01
Orbis
010t/01
Orbis IS
010t/02
162
12 Sep 2011
Flame Detectors
Certificated Products 55000-022 55000-023 55000-024 55000-025 XP95 intelligentflame detector (45681-209 and 45681-210) Note: Meets EN 54-10: 2002 at Class 1 and Class 3 XP95 intelligent 2 flame detectorand 45681-210) Note: Meets EN 54-10: 2002 at Class 1 and Class 3 XP95 intelligent 3 flame detectorand 45681-210) Note: Meets EN 54-10: 2002 at Class 1 and Class 3 S65 conventional UV flame detector (45681-200 and 45681-201) Note: Meets EN 54-10: 2002 at Class 1 and Class 3 LPCB Ref. No. 010an/01 010an/02 010an/03 010an/04
Bases 45681-200 45681-201 45681-209 45681-210 Mounting Base Mounting Base with Diode Deep Base Mounting Base
LV350
928d/01
S3500
928d/02
Bases VB100 UB100 VB100S UB100S VDBS100 DBS100 VDBS100S DBS100S UBR100 DBSR100 UBDR100
Vega adaptor mounting base (with link resistor) Universal adaptor mounting base Vega adaptor base with shorting clip Universal adaptor base with shorting clip Vega deep adaptor base Deep adaptor base Vega deep adaptor base with shorting clip Deep adaptor base with shorting clip Universal adaptor base with resistor Deep adaptor base with resistor Universal adaptor base with resistor and Schottky diode
12 Sep 2011
163
Certificate No: 928b to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005 Certificate No: 928e to EN 54-7: 2000 + A1: 2002 + A2: 2006
LV100
928e/01
S1000
Meets the requirements of EN 54-7 at the following sensitivity settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low Conventional photo smoke detector (UB100, DBS100, UBR100, DBSR100, UBDR100 and DBSRD100)
928e/02
Bases VB100 UB100 VB100S UB100S VDBS100 DBS100 VDBS100S DBS100S UBR100 DBSR100 UBDR100 DBSRD100
Vega adaptor mounting base (with link resistor) Universal adaptor mounting base Vega adaptor base with shorting clip Universal adaptor base with shorting clip Vega deep adaptor base Deep adaptor base Vega deep adaptor base with shorting clip Deep adaptor base with shorting clip Universal adaptor base with resistor Deep adaptor base with resistor Universal adaptor base with resistor and Schottky diode Deep adaptor base with resistor and Schottky diode
Certificate No: 928c to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54 -17: 2005 & CEA 4021: 2003 Certificate No: 928f to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003
Multisensor Detectors
Certificated Products V200 Analogue addressable Class P heat and photoelectric smoke multi sensor detector with short circuit isolator (VB100, UB100, VB100S, UB100S, VDBS100, DBS100, VDBS100S and DBS100S bases) Notes 1. LPCB Ref. No. 928c/01
2. 3.
Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi Criteria Level 1 (most sensitive) Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 2 Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 3 Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 4 (least sensitive) Thermally enhanced smoke detection with Class A1 heat response Meets the requirements of EN 54-5 (Class A1R) at the following settings: Class A1R heat only response Meets the requirements of EN 54-7 at the following settings: Optical only level 1 High Optical only level 2
164
12 Sep 2011
LV200
2. 3.
Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi criteria level 1 (most sensitive) - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 2 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 3 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 4 (least sensitive) - thermally enhanced smoke detection with Class A1 heat response Meets the requirements of EN 54-5 (Class A1R) at the following settings: Class A1R heat only response Meets the requirements of EN 54-7 at the following settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low
Vega adaptor mounting base (with link resistor) Vega universal mounting base Vega adaptor base with shorting clip Universal adaptor base with shorting clip Vega deep adaptor base Deep adaptor base Vega deep adaptor base with shorting clip Deep adaptor base with shorting clip
Certificate No: 928j to EN 54-5: 2000 + A1: 2002 and EN 54-25: 2008
Heat Detectors
Certificated Products SG350 Wireless heat detector (WAB100 base) Notes: 1. 2. LPCB Ref. No. 928j/01
Meets the requirements of EN 54-5 for Class A1R The device must be used with the following batteries only: CR123A (3 Vdc) - main battery CR2032A (3 Vdc) - secondary battery
Bases WAB100
Certificate No: 928k to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-25: 2008
Smoke Detectors
Certificated Products SG100 Wireless optical smoke detector (WAB100 base) Notes: 1. 2. LPCB Ref. No. 928k/01
Meets the requirements of EN 54-7 in the normal sensitivity setting The device must be used with the following batteries only: CR123A (3 Vdc) - main battery CR2032A (3 Vdc) - secondary battery
Bases
12 Sep 2011
165
Certificate No: 928m to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-25: 2008 and CEA 4021: 2003
Multi-Criteria Detectors
Certificated Products SG200 Wireless multi-criteria detector (WAB100 base) Notes: 1. 2. 3. LPCB Ref. No. 928m/01
Meets the requirements of EN 54-5 for Class A1 Meets the requirements of EN 54-7 in the normal sensitivity settings The device must be used with the following batteries only: CR123A (3 Vdc) - main battery CR2032A (3 Vdc) - secondary battery
Bases WAB100
Argus-Spectrum Co
65 Serdobolskaya St, St. Petersburg 197342, Russian Federation Tel: +7 812 7037500 Fax: +7 812 7037501 E-mail: mail@argus-spectr.ru Website: www.argus-spectr.ru
Certificate No: 928a-(cl-2) to 54-5: 2000 + A1: 2002 and EN 54 -17: 2005 Certificate No: 928d-(cl-2) to EN 54-5: 2000 + A1: 2002 Certificate No: 603d to EN 54-5: 2000 + A1: 2002
V350
928a/01
Bases: BS100 BSD100 VB100 UB100 DBS100 UBR100 DBSR100 UBDR100 DBSRD100
Standard base Schottky Diode base Vega adaptor mounting base (with link resistor) Universal adaptor base Deep adaptor base Universal adaptor base with resistor Deep adaptor base with resistor Universal adaptor base with resistor and Schottky diode Deep adaptor base with resistor and Schottky diode
Certificate No: 928b-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54 -17: 2005 Certificate No: 928e-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006 Certificate No: 603c to EN 54-7: 2000 + A1: 2002 + A2: 2006
166
12 Sep 2011
LV100
928e/01
Vega adaptor mounting base (with link resistor) Vega universal mounting base Universal adaptor base Deep adaptor base Universal adaptor base with resistor Deep adaptor base with resistor Universal adaptor base with resistor and Schottky diode Deep adaptor base with resistor and Schottky diode
Certificate No: 928c-(cl-2) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54 -17: 2005 & CEA4021: 2003 Certificate No: 928f-(cl-2) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003
Multi-sensor Detectors
Certificated Products V200 Analogue addressable Class P heat and photoelectric smoke multi-sensor detector with short circuit isolator (VB100 and UB100 bases) Notes 1. LPCB Ref. No. 928c/01
2. 3.
Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi criteria level 1 (most sensitive) - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 2 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 3 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 4 (least sensitive) - thermally enhanced smoke detection with Class A1 heat response Meets the requirements of EN 54-5 (Class A1R) at the following settings: Class A1R heat only response Meets the requirements of EN 54-7 at the following settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low 928f/01
LV200
Vega-Lite analogue addressable photo thermal multisensor (VB100 and UB100 bases) Notes 1.
Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi criteria level 1 (most sensitive) - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 2 - thermally enhanced smoke detection with Class A1 heat response Multi criteria level 3 - thermally enhanced smoke detection with Class A1 heat response
12 Sep 2011
167
2. 3.
Bases VB100 Vega adaptor mounting base (with link resistor) UB100 Vega universal mounting base
Heat Detectors
Certificated Products VELOX V350 Analogue addressable Class P heat detector with short circuit isolator (VELOX VB100, UB100, VELOX VB100S, UB100S, VELOX VDBS100, DBS100, VELOX VDBS100S and DBS100S bases) Note: 1. Meets the requirements of EN 54-5 for Class A1R and Class B Analogue addressable Class P heat detector (VELOX VB100, UB100, VELOX VB100S, UB100S, VELOX VDBS100, DBS100, VELOX VDBS100S and DBS100S bases) Note: 1. Meets the requirements of EN 54-5 for Class A1R and Class B Conventional Class P heat detector (UB100, DBS100, UBR100, DBSR100, UBDR100 and DBSRD100 bases) Note: 1. Meets the requirements of EN 54-5 for Class A1R and Class B LPCB Ref. No. 928a/01
VELOX LV350
928d/01
X350
928d/02
Bases VELOX VB100 UB100 VELOX VB100S UB100S VELOX VDBS100 DBS100 VELOX VDBS100S DBS100S UBR100 DBSR100 UBDR100 DBSRD100
Velox adaptor base Universal adaptor base Velox adaptor base with shorting clip Universal adaptor base with shorting clip Velox deep adaptor base Deep adaptor base Velox deep adaptor base with shorting clip Deep adaptor base with shorting clip Universal adaptor base with resistor Deep adaptor base with resistor Universal adaptor base with resistor and Schottky diode Deep adaptor base with resistor and Schottky diode
Certificate No: 928b-(cl-7) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005 Certificate No: 928e-(cl-9) to EN 54-7: 2000 + A1: 2002 + A2: 2006
Smoke Detectors
Certificated Products VELOX V100 Analogue addressable photoelectric smoke detector with short circuit isolator (VELOX VB100, UB100, VELOX VB100S, UB100S, VELOX VDBS100, DBS100, VELOX VDBS100S and DBS100S bases) Note: LPCB Ref. No. 928b/01
168
12 Sep 2011
VELOX LV100
928e/01
X100
928e/02
Bases VELOX VB100 UB100 VELOX VB100S UB100S VELOX VDBS100 DBS100 VELOX VDBS100S DBS100S
Velox adaptor base Universal adaptor base Velox adaptor base with shorting clip Universal adaptor base with shorting clip Velox deep adaptor base Deep adaptor base Velox deep adaptor base with shorting clip Deep adaptor base with shorting clip
Certificate No: 928c-(cl-7) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA 4021: 2003 Certificate No: 928f-(cl-7) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: 2003
Multi-Criteria Detectors
Certificated Products VELOX V200 Analogue addressable Class P heat and photoelectric smoke multi-sensor detector with short circuit isolator (VELOX VB100, UB100, VELOX VB100S, UB100S, VELOX VDBS100, DBS100, VELOX VDBS100S and DBS100S bases) Notes: 1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi Criteria Level 1 (most sensitive) - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 2 - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 3 - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 4 (least sensitive) - Thermally enhanced smoke detection with Class A1 heat response 2. Meets the requirements of EN 54-5 (Class A1R) at the following settings: Class A1R heat only response 3. Meets the requirements of EN 54-7 at the following settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low Analogue addressable Class P heat and photoelectric smoke multi-sensor detector (VELOX VB100, UB100, VELOX VB100S, UB100S, VELOX VDBS100, DBS100, VELOX VDBS100S and DBS100S bases) Notes: 1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi Criteria Level 1 (most sensitive) - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 2 - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 3 - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 4 (least sensitive) - Thermally enhanced smoke detection with Class A1 heat response 2. Meets the requirements of EN 54-5 (Class A1R) at the following settings: Class A1R heat only response 3. Meets the requirements of EN 54-7 at the following settings: LPCB Ref. No. 928c/01
VELOX LV200
928f/01
12 Sep 2011
169
Velox adaptor base Universal adaptor base Velox adaptor base with shorting clip Universal adaptor base with shorting clip Velox deep adaptor base Deep adaptor base Velox deep adaptor base with shorting clip Deep adaptor base with shorting clip
Bardic by Honeywell
140 Waterside Road, Hamilton Industrial Estate, Leicester LE5 1TN, United Kingdom Tel: +44 (0) 116 246 2212 Fax: +44 (0) 116 246 2210 Website: www.bardic.co.uk
Certificate No: 199n to EN 54-5: 2000
Heat Detectors
Certificated Products ZF03 class A2S ZF04 class BS ZF05 class A1R Conventional fixed temperature heat detector (2020B, 2020DB, 2020BSD, 2020DBSD bases) Conventional fixed temperature heat detector (2020B, 2020DB, 2020BSD, 2020DBSD bases) Conventional rate of rise heat detector (2020B, 2020DB, 2020BSD, 2020DBSD bases) LPCB Ref. No. 199n/10 199n/11 199n/12
Bases: 2020B Standard base 2020DB Deep base 2020BSD Standard base with schottky diode 2020DBSD Deep base with schottky diode Certificate No: 199m to EN 54-7: 2000
Photoelectric Detectors
Certificated Products ZF01 Conventional photoelectric detector (2020B, 2020DB, 2020BSD, 2020DBSD bases) LPCB Ref. No. 199m/05
Bases: 2020B Standard base 2020DB Deep base 2020BSD Standard base with schottky diode 2020DBSD Deep base with schottky diode Certificate No: 199p to EN 54-5: 2000, EN 54-7: 2000 & CEA 4021 1999
Multi-criteria Detectors
Certificated Products ZF02 Conventional photo thermal detector (2020B, 2020DB, 2020BSD, 2020DBSD bases) LPCB Ref. No. 199p/04
Bases:
170
12 Sep 2011
Bases YBN-R/3 base YBN-R/6 standard base YBO-R/SCI isolator base Certificate No: 358c-(cl-1) to EN54-7:2000
Smoke Detectors
Certificated Products ALK-E (WHT) Analogue addressable optical smoke detector (White) (YBN-R/3,YBO-R/SCI,YBO-BS & YBO-BSB bases) Note: Meets the requirements of EN54-7 in low and high sensitivity settings and in normal and low power modes Conventional optical smoke detector (White) (YBN-R/6) LPCB Ref. No. 358c/03
SLV-E3 (WHT)
358c/05
Bases YBN-R/3 base YBN-R/6 standard base YBO-R/SCI isolator base YBO-BS base sounder YBO-BSB base sounder and beacon
12 Sep 2011
171
Bases: B501 Analogue sensor base B501DG Analogue sensor deep base B524IEFT Analogue sensor isolator base
Multi-criteria Detectors
Bases: B501Analogue sensor base B501DG Analogue sensor deep base B524IEFT Analogue sensor isolator base
Beam Detectors
Certificated Products Resonance Optical Beam 6500F Analogue optical beam detector with self test facility and short circuit isolator feature Note: meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 and Acclimate levels 1 & 2 LPCB Ref. No. 199w/02
172
12 Sep 2011
Heat Detectors
Certificated Products 55000-465IMC 55000-475IMC Analogue addressable Class A2S heat detector 45681-213IMC and 45681-505IMC bases) Analogue addressable Class CS heat detector 45681-213IMC and 45681-505IMC bases) LPCB Ref. No. 010u/04 010u/05
Smoke Detectors
Certificated Products 55000-665IMC Analogue addressable optical smoke 45681-213IMC and 45681-505IMC bases) LPCB Ref. No. 010v/02
Certificate No: 685b to EN 54-7: 2000 Certificate No: 685d to EN 54-7: 2000
12 Sep 2011
173
Bases: CDB300 standard conventional mounting base (CFS version) CDBB300 standard conventional mounting base (CFS version) COPC800 standard conventional mounting base (CFS version) FXN720 standard analogue addressable mounting base (JSB version) MDB800 standard conventional mounting base MDB800 Standard conventional mounting base (Menvier version) FXN520 Standard conventional mounting base (JSB version)
Cooper Safety
Wheatley Hall Road, Doncaster, South Yorkshire DN2 4NB, United Kingdom Tel: 01302 321541 Fax: 01302 303220
Certificate No: 685j-(cl-1) to EN 54-7:2000 + A1:2002 + A2:2006 & EN 54-17:2005 Certificate No: 685j-(cl-2) to EN 54-7:2000 + A1:2002 + A2:2006 & EN 54-17:2005 Certificate No: 685h-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 Certificate No: 685h-(cl-2) to EN 54-7: 2000 + A1: 2002 + A2: 2006
174
12 Sep 2011
Certificate No: 685k-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA4021: July 2003(en) Certificate No: 685k-(cl-2) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA4021: July 2003(en) Certificate No: 685g-(cl-1) to EN 54-5: 2000 + A1: 2002 & EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003 Certificate No: 685g-(cl-2) to EN 54-5: 2000 + A1: 2002 & EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003
Multi-criteria Detectors
Certificated Products CPT341 CPTB341 FXN632 MPT951 CAPT340 Conventional photo/thermal multisensor and Class A2S heat detector (MDB800/CDB300 base) Conventional photo/thermal multisensor and Class A2S heat detector (FXN520/CDBB300 base) Conventional photo/thermal multisensor and Class A2S heat detector (FXN520/CDBB300 base) Conventional photo/thermal multisensor and Class A2S heat detector (MDB800/CDB300 base) Intelligent analogue addressable Class A2S multisensor opto/heat detector (CAB300 base) Notes: 1) Meets the requirements of EN 54-5 and EN 54-7 in the following modes: Mode 1 - Photoelectric/heat combined only Mode 2 - Photoelectric/heat combined together with an alarm output from temperature alone (Class A2S) Mode 3 - Heat detector alone (Class A2S) Intelligent analogue addressable Class A2S multisensor opto/heat detector (CABB300 base) Notes: 1) Meets the requirements of EN 54-5 and EN 54-7 in the following modes: Mode 1 - Photoelectric/heat combined only Mode 2 - Photoelectric/heat combined together with an alarm output from temperature alone (Class A2S) Mode 3 - Heat detector alone (Class A2S) Intelligent analogue addressable Class A2S multisensor opto/heat detector (COPA800 base) Notes: 1) Meets the requirements of EN 54-5 and EN 54-7 in the following modes: Mode 1 - Photoelectric/heat combined only Mode 2 - Photoelectric/heat combined together with an alarm output from temperature alone (Class A2S) Mode 3 - Heat detector alone (Class A2S) Intelligent analogue addressable Class A2S multisensor opto/heat detector (FXN720 base) Notes: 1) Meets the requirements of EN 54-5 and EN 54-7 in the following modes: Mode 1 - Photoelectric/heat combined only Mode 2 - Photoelectric/heat combined together with an alarm output from temperature alone (Class A2S) Mode 3 - Heat detector alone (Class A2S) Intelligent analogue addressable Class A2S multisensor opto/heat detector (MAB800 base) Notes: LPCB Ref. No. 685g/01 685g/01 685g/01 685g/01 685k/01
CAPTB340
685k/01
COPOH450
685k/01
FXN722
685k/01
MAOH850
685k/01
12 Sep 2011
175
Bases MAB800 CABB300 FXN720 CAB300 COPA800 MDB800/CDB300 FXN520/CDBB300 Standard analogue addressable mounting base Standard analogue addressable mounting base Standard analogue addressable mounting base Standard analogue addressable mounting base Standard analogue addressable mounting base Standard conventional mounting base Schottky conventional mounting base
Certificate No: 685m-(cl-1) to EN 54-5: 2000+A1:2002 & EN 54-17: 2005 Certificate No: 685m-(cl-2) to EN 54-5: 2000+A1:2002 & EN 54-17: 2005
Heat Detectors
Certificated Products CAH330 Intelligent analogue addressable Class P heat detector (CAB300 base) Notes: 1) Meets the requirements of EN 54-5 at classes A1R, BS and CS Intelligent analogue addressable Class P heat detector (CABB300 base) Notes: 1) Meets the requirements of EN 54-5 at classes A1R, BS and CS Intelligent analogue addressable Class P heat detector (COPA800 base) Notes: 1) Meets the requirements of EN 54-5 at classes A1R, BS and CS Intelligent analogue addressable Class P heat detector (FXN720 base) Notes: 1) Meets the requirements of EN 54-5 at classes A1R, BS and CS Intelligent analogue addressable Class P heat detector (MAB800 base) Notes: 1) Meets the requirements of EN 54-5 at classes A1R, BS and CS LPCB Ref. No. 685m/01
CAHB330
685m/01
COPH430
685m/01
FXN725
685m/01
MAH830
685m/01
Bases MAB800 CABB300 FXN720 CAB300 COPA800 Standard analogue addressable mounting base Standard analogue addressable mounting base Standard analogue addressable mounting base Standard analogue addressable mounting base Standard analogue addressable mounting base
Certificate No: 685a-(cl-1) to EN 54-5: 2000 + A1: 2002 Certificate No: 685a-(cl-2) to EN 54-5: 2000 + A1: 2002
176
12 Sep 2011
Bases MDB800/CDB300 Standard conventional mounting base FXN520/CDBB300 Schottky conventional mounting base
Bases NUG30256 NUG30255 Standard analogue addressable mounting base Standard conventional mounting base
Certificate No: 685m-(cl-3) to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005
Heat Detectors
Certificated Products DTVA3000 Intelligent analogue addressable Class P heat detector (NUG30256 base) Notes: 1. Meets the requirements of EN 54-5 at classes A1R, BS and CS LPCB Ref. No. 685m/01
Certificate No: 685k-(cl-3) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 , EN 54-17: 2005 and CEA4021: July 2003(en) Certificate No: 685g-(cl-1) to EN 54-5: 2000 + A1: 2002 & EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003
Multi-Criteria Detectors
Certificated Products DMCFS3000 DMCFA3000 Conventional photo/thermal multisensor and Class A2S heat detector (NUG30255 base) Intelligent analogue addressable Class A2S multisensor opto/heat detector (NUG30256 base) Notes: 1. Meets the requirements of EN 54-5 and EN 54-7in the following modes: Mode 1 - Photoelectric/heat combined only Mode 2 - Photoelectric/heat combined together with an alarm output from temperature alone (Class A2S) Mode 3 - Heat detector alone (Class A2S) LPCB Ref. No. 685g/01 685k/01
12 Sep 2011
177
X5200
973a/02
X3301
973a/03
X2200
973a/04
EMCO
125 El Alamean Street, El Mohandessin, Cairo, Egypt Tel: 00202 33 44 3 245 Fax: 00202 330 36 86 0 E-mail: emco@4emco.com Website: www.4emco.com
Certificate No: 928a to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005 Certificate No: 928d to EN 54-5: 2000 + A1: 2002
178
12 Sep 2011
AD203
928d/01
Universal adaptor base Deep adaptor base Vega adaptor base Vega deep adaptor base Universal adaptor base with shorting clip Deep adaptor base with shorting clip Vega adaptor base with shorting clip Vega deep adaptor base with shorting clip
Certificate No: 928b to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005 Certificate No: 928e to EN 54-7: 2000 + A1: 2002 + A2: 2006 Certificated Products AD201S Analogue addressable photoelectric smoke detector with short circuit isolator (AB100, AB100D, AB200, AB200D, AB100-S, AB100D-S, AB200-S and AB200D-S bases) Note: 1. Meets the requirements of EN 54-7 at the following sensitivity settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low Analogue addressable photoelectric smoke detector lite (AB100, AB100D, AB200, AB200D, AB100-S, AB100D-S, AB200-S and AB200D-S bases) Note: 1. Meets the requirements of EN 54-7 at the following sensitivity settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low LPCB Ref. No. 928b/01
AD201
928e/01
Universal adaptor base Deep adaptor base Vega adaptor base Vega deep adaptor base Universal adaptor base with shorting clip Deep adaptor base with shorting clip Vega adaptor base with shorting clip Vega deep adaptor base with shorting clip
Certificate No: 928c to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA 4021: 2003 Certificate No: 928f to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: 2003 Certificated Products AD202S Analogue addressable Class P heat and photoelectric smoke multi-sensor detector with short circuit isolator (AB100, AB100D, AB200, AB200D, AB100-S, AB100D-S, AB200-S and AB200D-S bases) Notes: 1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi Criteria Level 1 (most sensitive) - Thermally enhanced smoke LPCB Ref. No. 928c/01
12 Sep 2011
179
2. 3.
AD202
Analogue addressable Class P heat and photoelectric smoke multi-sensor detector lite (AB100, AB100D, AB200, AB200D, AB100-S, AB100D-S, AB200-S and AB200D-S bases) Notes: 1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi Criteria Level 1 (most sensitive) - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 2 - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 3 - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 4 (least sensitive) - Thermally enhanced smoke detection with Class A1 heat response 2. Meets the requirements of EN 54-5 (Class A1R) at the following settings: Class A1R heat only response 3. Meets the requirements of EN 54-7 at the following settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low
Universal adaptor base Deep adaptor base Vega adaptor base Vega deep adaptor base Universal adaptor base with shorting clip Deep adaptor base with shorting clip Vega adaptor base with shorting clip Vega deep adaptor base with shorting clip
180
12 Sep 2011
Bases: FAP6-STB Mounting base Certificate No: 010h to EN 54-5:2000 + A1:2002, EN 54-7:2000 + A1:2002, CEA 4021:2003
Multi-criteria Detectors
Certificated Products FADY-MUS Analogue addressable multisensor detector (FA95-ACB mounting base) Notes: 1) Certificated at the following settings: Mode 1 - High sensitivity smoke detector with standard heat enhancement Mode 2 - Smoke detection only Mode 3 - Medium sensitivity smoke detector with standard heat enhancement Mode 4 - Low sensitivity smoke detector with high heat enhancement Mode 5 - Class A1 heat detector Also approved in conventional alarm modes 1, 2, 3, 4 and 5 2) Certificated with Apollo Discovery, XP95, and S90 digital communications protocols configured for the Discovery heat detector in accordance with manufacturers instructions. LPCB Ref. No. 010h/01
Bases: FA95-ACB Mounting base FAP6-STB Diode mounting base Certificate No: 010q to EN 54 - 7:2000 + A1:2002
010q/06 010q/12
12 Sep 2011
181
Multi-criteria Detectors
Certificated Products FX-0315-2 FX-0315-3 FX-0315-4 Bases: AHMB-031 mounting base Certificate No: 506c to EN54-5: 2000 (2 - wire) Optical smoke and Class A2 heat detector (AHMB-31 Base) (3 - wire) Optical smoke and Class A2 detector (AHMB-31 Base) (4 - wire) Optical smoke and Class A2 heat detector (AHMB-31 Base) LPCB Ref. No. 506b/01 506b/02 506b/03
Smoke Detectors
Certificated Products EURV-P EURVC-P EURVC-P EURV-P Analogue addressable optical smoke detector (EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases) Note: Meets the requirements of EN 54-7 at Lowest and Highest sensitivity settings only. Conventional optical smoke detector (EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases) Conventional optical smoke detector (EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases) Analogue addressable optical smoke detector (EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases) Note: Meets the requirements of EN 54-7 at Lowest and Highest sensitivity settings only. LPCB Ref. No. 041f/01 041f/03 842a/01 842a/04
Bases EURB-4 universal mounting base EURB-4-EV universal mounting base EURB-4SD universal mounting base with schottky diode EURB-4SE-EV Standard deep base
182
12 Sep 2011
Certificate No: 041g-(cl-1) to EN 54-5: 2000 + A1: 2002, EN54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: 1999 Certificate No: 041h-(cl-1) to EN54-5: 2000 + A1: 2002
Heat Detectors
Certificated Products EURV-PH EURV-H-A1R EURV-H-CS EURVC-H-A2S EURVC-H-CS Analogue addressable optical smoke / class A1R heat detector (EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases) Note: Meets the requirements of EN 54-7 at Lowest and Highest sensitivity settings. Analogue addressable Class A1R heat detector (EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases) Analogue addressable Class CS heat detector (EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases) Conventional Class A2S heat detector (EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases) Conventional Class CS heat detector (EURB-4, EURB-4-EV, EURB-4SD and EURB-4SE-EV bases) LPCB Ref. No. 041g/01 041h/01 041h/02 041h/03 041h/04
Bases EURB-4 universal mounting base EURB-4-EV universal mounting base EURB-4SD universal mounting base with schottky diode EURB-4SE-EV Standard deep base
Smoke Detectors
Certificated Products EA318-2 EA318-2(LED) EA318-4-12 EA318-4-24 Conventional 2 wire photoelectric smoke detector (P/N852001 base) Conventional 2 wire photoelectric smoke detector with remote LED output (P/N854001 base) Conventional 4 wire photoelectric smoke detector (P/N854001 base) Conventional 4 wire photoelectric smoke detector (P/N854001 base) LPCB Ref. No. 512a/01 512a/02 512a/03 512a/04
Certificate No: 512b to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA4021: 2003
Multi-criteria Detectors
Certificated Products EA318-2H EA318-2H-LED EA318-4H-12 EA318-4H-24 Conventional 2 wire photoelectric smoke and heat detector (P/N852001 base) Conventional 2 wire photoelectric smoke and heat detector with remote LED output (P/N854001 base) Conventional 4 wire photoelectric smoke and heat detector (P/N854001 base) Conventional 4 wire photoelectric smoke and heat detector (P/N854001 base) LPCB Ref. No. 512b/01 512b/02 512b/03 512b/04
12 Sep 2011
183
184
12 Sep 2011
FGSD100
928e/01
Bases VB100 Vega adaptor base (with link resistor) UB100 Universal adaptor base VB100S Vega adaptor base with shorting clip UB100S Universal adaptor base with shorting clip VDBS100Vega deep adaptor base DBS100 Deep adaptor base VDBS100S Vega deep adaptor base with shorting clip DBS100SDeep adaptor base with shorting clip Certificate No: 512d-(cl-4) to EN54-5: 2000 + A1: 2002 Certificate No: 928d-(cl-7) to EN 54-5: 2000 + A1: 2002 Certificated Products Fireguard FG323-2L Conventional 2 wire 24VDC class A2R fixed temperature and rate-of-rise heat detector with LED output (Fireguard P/N FG854001 base) Bases: Fireguard P/N FG854001 4 wire detector base Analogue addressable Class P heat detector lite (VB100, UB100, VB100S, UB100S, VDBS100, DBS100, VDBS100S and DBS100S bases) Note: 1. Meets the requirements of EN 54-5 for Class A1R and Class B LPCB Ref. No. 512d/04
FGHD350
928d/01
Bases VB100 Vega adaptor base (with link resistor) UB100 Universal adaptor base VB100S Vega adaptor base with shorting clip UB100S Universal adaptor base with shorting clip VDBS100Vega deep adaptor base DBS100 Deep adaptor base VDBS100S Vega deep adaptor base with shorting clip DBS100SDeep adaptor base with shorting clip
12 Sep 2011
185
Bases VB100 Vega adaptor base (with link resistor) UB100 Universal adaptor base VB100S Vega adaptor base with shorting clip UB100S Universal adaptor base with shorting clip VDBS100Vega deep adaptor base DBS100 Deep adaptor base VDBS100S Vega deep adaptor base with shorting clip DBS100SDeep adaptor base with shorting clip
Heat Detectors
Certificated Products FX9103 FX9103I Conventional heat detector Class A1R (DZ-03 base) Intelligent Rate of Rise Heat Detector Class A1R (DZ-03 base) LPCB Ref. No. 548c/01 548c/02
Bases: DZ-03 Standard detector base Certificate No: 548d to EN 54-7: 2000
Smoke Detectors
Certificated Products FX9102 FX9102I Conventional Photoelectric Smoke Detector (DZ-03 base) Intelligent Photoelectric Smoke Detector (DZ-03 base) LPCB Ref. No. 548d/01 548d/02
Beam Detectors
Certificated Products FX9105RI Intelligent optical beam detector Notes: 1) Meets the requirements of EN 54-12 at the following sensitivity settings: Level 1 - 1.61 dB Level 2 - 2.31dB LPCB Ref. No. 548k/01
186
12 Sep 2011
Multi-Criteria Detectors
Certificated Products SIGA-IPHSI Intelligent analogue addressable thermally enhanced photoelectric and ionisation smoke detector (SIGI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB, SIGA-RB4, SIGA-IB, SIGA-IB4 & SIGA-AB4G bases) Notes: 1) Meets the requirements of EN 54-7:2000 at sensitivity settings 1.0%/ft, 2%/ft, 2.5%/ft, 3%/ft, and 3.5%/ft. 2) The SIGA-LED indicator is approved for use with the SIGA-SB and SIGA-SB4 bases Intelligent analogue addressable thermally enhanced photoelectric smoke detector (SIGI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB, SIGA-RB4, SIGA-IB, SIGA-IB4 and SIGA-AB4G bases) Notes: 1) Meets the requirements of EN 54-7:2000 at sensitivity settings 1.0%/ft, 2%/ft, 2.5%/ft, 3%/ft, and 3.5%/ft. 2) The SIGA-LED indicator is approved for use with the SIGA-SB and SIGA-SB4 bases LPCB Ref. No. 262s/01
SIGA-PHSI
262s/02
Bases: SIGI-IBS Isolator base SIGA-SB Standard base SIGA-SB4 Standard base with trim skirt SIGA-RB Relay base SIGA-RB4 Relay base with trim skirt SIGA-IB Isolator Base SIGA-IB4 Isolator base with 4 inch mounting adaptors SIGA-AB4G Sounder base Accessories SIGA-LED Indicator
SIGA-PSI
262t/02
12 Sep 2011
187
Bases: SIGI-IBS Isolator base SIGA-SB Standard base SIGA-SB4 Standard base with trim skirt SIGA-RB Relay base SIGA-RB4 Relay base with trim skirt SIGA-IB Isolator Base SIGA-IB4 Isolator base with 4 inch mounting adaptors SIGA-AB4G Sounder base Accessories SIGA-LED Indicator
Gent By Honeywell
140 Waterside Road, Hamilton Industrial Park, Leicester LE5 1TN, United Kingdom Tel: +44 (0)116 246 2000 Fax: +44 (0)116 246 2300 E-mail: gent_enquiry@gent.co.uk Website: www.gent.co.uk Middle East Sales Enquiries: E-mail: gent.export@honeywell.com
Certificate No: 567a to BS 5445: Part 7: 1984 This certificate is to a withdrawn standard. Detectors conforming to this standard are not suitable for use within the jurisdiction of the European Union (EU). This certificate, to the withdrawn standard, is maintained because detectors meeting the withdrawn standard requirements are still requested by some regulators outside the EU. Certificate No: 042bd to EN54-7: 2000+A1: 2002+A2: 2006, EN54-17: 2005, EN54-18: 2005 Certificate No: 042az to EN 54-7: 2000 + A1: 2002 + A2: 2006
188
12 Sep 2011
17840-01
567a/02
Bases: 78200-01NM standard base 17800-01 standard base 17801-01 standard base with diode 17800-02 low profile base 17801-02 low profile base with diode S4-700 Standard base S4-FLUSH Semi-flush fixing kit Certificate No: 567b to BS 5445: Part 5: 1977 This certificate is to a withdrawn standard. Detectors conforming to this standard are not suitable for use within the jurisdiction of the European Union (EU). This certificate, to the withdrawn standard, is maintained because detectors meeting the withdrawn standard requirements are still requested by some regulators outside the EU. Certificate No: 042ak to EN 54-5: 2000 + A1: 2002, EN 54-3: 2001 + A1: 2002 & CEA GEI 1 - 084: Draft 08.08.00, CEA GEI 1-052: 11.06.97 Draft 2.0 Certificate No: 042be to EN54-5: 2000+A1: 2002, EN54-17: 2005, EN54-18: 2005 Certificate No: 042ay to EN 54-5: 2000 + A1: 2002
Note: Meets the requirement of EN 54: Part 5 at the following settings: State 0 - Class A1 State 5 - Class B
17850-01
Conventional grade 1 fixed temperature heat detector (17800-01, 17801-01, 17800-02 and 17801-02 bases)
567b/01
12 Sep 2011
189
Bases: 17800-01 standard base 17801-01 standard base with diode 17800-02 low profile base 17801-02 low profile base with diode S4-700 standard base S4-FLUSH semi-flush fixing kit Certificate No: 042am to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002, CEA 4021: 2003-07 & CEA GEI 1 - 084 and CEA GE 1 - 052: 11.06.97 Draft 2.0 Certificate No: 042an to EN 54-5: 2000 + A1: 2002, EN 54-5: 2000 + A1: 2002, EN 54-3: 2001 + A1:2002, CEA 4021: 2003-07, CEA GEI 1 - 084: Draft 08.08.00, CEA GEI 1-052: 11.06.97 Draft 2.0 Certificate No: 042bf to EN54-5: 2000+A1: 2002, EN54-7: 2000+A1: 2002+A2: 2006, EN54-17: 2005, EN54-18: 2005
Multi-criteria Detectors
Certificated Products S4-711-ST S-Quad analogue addressable dual optical smoke and Class P heat multisensor detector with strobe (S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit) Notes: 1) Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at the following settings: State 0 - Medium optical / Class A1 heat State 5 - Medium optical / Class B heat State 8 - Delayed medium optical / Class A1 heat 2) The strobe function is not included within the scope of this approval S-Quad analogue addressable dual optical smoke, Class P heat and carbon monoxide multisensor detector (S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit) Notes: 1) Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at the following settings: State 0 - Medium optical / Class A1 heat 2) Meets the requirements of EN 54: Part 5 at the following settings: State 9 - Class A1 heat 3) Carbon monoxide detection is not included within the scope of this approval S-Quad analogue addressable dual optical smoke and Class P heat multisensor detector with speech and strobe (S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit) Notes: 1) Meets the requirement of EN 54: Part 5 and requirements of EN 54: Part 7 at the following settings: State 0 - Medium optical / Class A1 heat State 5 - Medium optical / Class B heat State 8 - Delayed medium optical / Class A1 heat 2) Meets the requirements of EN 54: Part 3 at the following sounder tone settings: High - Continuous 933 Hz Alternate - High 933 Hz for 0.25 secs / Low 700 Hz for 0.25 secs 3) Speech and strobe not included in scope of approval S-Quad analogue addressable dual optical smoke and Class P heat multisensor detector with sounder (S4-700 Standard base with or without S4-FLUSH semi-flush mounting kit) LPCB Ref. No. 042am/02
S4-911
042am/03
S4-711-ST-VO
042an/01
S4-771
042an/02
190
12 Sep 2011
S4-711-VO
042an/05
S4-770-ST
042an/06
S4-710
042bf/01
Bases:
12 Sep 2011
191
Beam Detectors
Certificated Products S4-34740 Analogue addressable optical beam smoke detector with short circuit isolator ( S4-34741-01 and S4-34741-03) Notes: 1. The S4-34740 beam sensor pair comprises of an S4-34741 beam transmitter, plus an S4-34742 beam receiver. 2. Meets the requirements of EN 54-12 at the following sensitivity settings: States 0, 1: 3.01dB States 2, 3: 1.25dB LPCB Ref. No. 042bh/01
GEZE GmbH
Reinhold-Vster-Str. 21-29, D-71229 Leonberg, Germany Tel: +49 (0)7152-203-0 Fax: +49 (0)7152-203-310 E-mail: p.igl@geze.com Website: www.geze.com
Certificate No: 928d-(cl-10) to EN 54-5: 2000 + A1: 2002
Base GC160 B
192
12 Sep 2011
Smoke Detectors
Certificated Products C-9102 I-9102 Bases: DZ-03 Standard detector base Conventional Photoelectric Smoke Detector (DZ-03 base) Intelligent Photoelectric Smoke Detector (DZ-03 base) LPCB Ref. No. 548d/01 548d/02
Heat Detectors
Certificated Products GS104C GS104I Conventional heat detector Class A1R (DZ-03 base) Intelligent rate of rise heat detector Class A1R (DZ-03 base) LPCB Ref. No. 548c/01 548c/02
Bases DZ-03 Standard detector base Certificate No: 548d to EN54-7: 2000
Smoke Detectors
Certificated Products GS102C GS102I Conventional photoelectric smoke detector (DZ-03 base) Intelligent photoelectric smoke detector (DZ-03 base) LPCB Ref. No. 548d/01 548d/02
12 Sep 2011
193
Beam Detectors
Certificated Products GS105RI Intelligent optical beam detector Notes: 1) Meets the requirements of EN 54-12 at the following sensitivity settings: Level 1 - 1.61 dB Level 2 - 2.31dB LPCB Ref. No. 548k/01
Gulf Security Technology Co. Ltd (Manufacturing Division of Global System Technology PLC)
No. 80 Changjiang East Road, Economic & Technological Development Zone, Qinhuangdao, Hebei Province 066004, China Tel: +86 0335 8502528 Fax: +86 0335 8508942 E-mail: gst@gst.com.cn Website: www.gst.com.cn Sales Enquiries: Tel: +852 28778566 Fax: +852 25118699 Tel: +86 (10)64392919 Fax: +86 (10)64391767
Beam Detectors
Certificated Products JTY-HM-GST102 Intelligent optical beam detector Notes: 1) Meets the requirements of EN 54-12 at the following sensitivity settings: Level 1 - 1.61 dB Level 2 - 2.31 dB LPCB Ref. No. 548k/01
194
12 Sep 2011
HDR
Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United Kingdom Tel: +44 (0)1634 260133 Fax: +44 (0)1634 260132 E-mail: info@hochikieurope.com Website: www.hochikieurope.com
Certificate No: 117f to EN54-7: 2000 + A1: 2002, EN54-5: 2000 + A1: 2002 and CEA 4021: 1999
Multi-Criteria Detectors
Certificated Products 1410010 Intelligent analogue addressable multisensor (YBN-R/3 base) Note: Meets EN 54-5 class A1 and B and EN 54-7 at 3.0%/m sensitivity setting in normal and low power mode. LPCB Ref. No. 117f/01
Bases: 1226150 Standard base 1426010 Standard base YCA-RL/3H2M Addressable base YBN-R/6SK Schottky diode base Certificate No: 117j to EN 54-12: 2002
Beam Detectors
Certificated Products 1213060 1213080 Optical Beam Smoke Detector Note: Certified at a sensitivity setting of 30% obscuration Conventional 2 wire optical beam smoke detector Notes: 1) Approved at sensitivity setting 25% and 50%. 2) Approved for use with 1213080 2WI interface kit. LPCB Ref. No. 117j/01 117j/03
12 Sep 2011
195
1412120
358c/04
1212270 1212280
358c/05 358c/06
Bases YBN-R/3 YBO-R/SCI YBO-BS YBO-BSB YBN-R/6 YBN-R/6SK YBO-R/6R YBO-R/6RS YBO-R/6RN YBO-R/6PA Standard base Positive switching short circuit isolator base Sounder base Sounder base with Beacon Standard base Standard base with schottky diode Relay base Relay base latching with schottky diode Relay base non latching Protector alarms base
Flame Detectors
Certificated Products IR3 IR3-IS IR3-EX IR2-UV IR2-UV-EX Conventional IR 3 Flame Detector (IR-AMB) Note: Meets EN 54-10: 2002 at Class 1 only Conventional IR 3 Intrinsically Safe Flame Detector Note: Meets EN 54-10: 2002 at Class 1 only Conventional IR 3 (Exd) Flameproof Flame Detector (IR-AMB) Note: Meets EN 54-10: 2002 at Class 1 only Conventional UV/IR Flame Detector (IR-AMB) Note: Meets EN 54-10: 2002 at Class 1 only Conventional UV/IR 2 (Exd) Flameproof Flame Detector (IR-AMB) Note: Meets EN 54-10: 2002 at Class 1 only LPCB Ref. No. 358d/01 358d/02 358d/03 358d/04 358d/05
196
12 Sep 2011
Hochiki Corporation
246 Tsuruma, Machidia, Tokyo 194-8577, Japan Tel: +81 3 3444 4111 Fax: +81 3 3444 4167 E-mail: info@hochiki.co.jp Website: www.hochiki.co.jp
Certificate No: 117k to EN 54-10: 2002 + A1: 2005 Certificated Products DRD-E Conventional Class 1 IR Flame Detector (YBN-R/6SK, YBN-R/6, YBO-R/6R, YBO-R/6RN, YBO-R/6PA, YBO-R/6RS) LPCB Ref. No. 117k/01
Bases YBN-R/6SK YBN-R/6 YBO-R/6R YBO-R/6RN YBO-R/6PA YBO-R/6RS Conventional Schottky diode base Conventional standard base Conventional latching relay base Conventional non-latching relay base Conventional 2 wire base Conventional latching relay base with integral Schottky diode
Manufacturing at (Certificate Nos. 117, 117f, 117g, 117h, 117j) Hochiki Corporation, 141-1 Maehara Ejiri, Kakuda-shi, Miyagi 971-15, Japan Tel: +81 3 3444 4111 Fax: +81 3 3444 4167 E-mail: overseas@hochiki.co.jp Website: www.hochiki.co.jp
Manufacturing at (Certificate Nos. 164, 164g, 164m) Hochiki Europe (UK) Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United Kingdom Tel: +44 (01634 260131 Fax: +44 (0)1634 260132 E-mail: sales@hochikieurope.com Website: www.hochikieurope.com
Manufacturing at (Certificate Nos. 358, 358c) Hochiki America Corporation, 7051 Village Drive, Buena Park, California 90621, United States Tel: +1 714 522 2246 Fax: +1 714 522 2268 E-mail: overseas@hochiki.co.jp Website: www.hochiki.com
12 Sep 2011
197
ACB-E (HFP)
117g/09
ACB-EM
117g/09
ACB-EW
117g/10
All Enquiries to: Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United Kingdom Tel: +44 (0)1634 260131 Fax: +44 (0)1634 260132
Manufacturing at (Certificate Nos. 117, 117f, 117g, 117h, 117j) Hochiki Corporation, 141-1 Maehara Ejiri, Kakuda-shi, Miyagi 971-15, Japan Tel: +81 3 3444 4111 Fax: +81 3 3444 4167
Beam Detectors
Certificated Products SRA-ET SRA-ET (HFP) Optical Beam Smoke Detector Note: 1) Certified at sensitivity settings 30% obscuration Optical Beam Smoke Detector LPCB Ref. No. 117j/01 117j/01
198
12 Sep 2011
SPC-E SPC-ET
SPC-ET(HFP)
117j/03
All Enquiries to: Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United Kingdom Tel: +44 (0)1634 260131 Fax: +44 (0)1634 260132
Manufacturing at (Certificate Nos. 117, 117f, 117g, 117h, 117j) Hochiki Corporation, 141-1 Maehara Ejiri, Kakuda-shi, Miyagi 971-15, Japan Tel: +81 3 3444 4111 Fax: +81 3 3444 4167
Certificate No: 117f to EN 54: 2000 + A1: 2002, EN 54-4: 2000 + A1: 2002 and CEA 4021: 1999
Multi-criteria Detectors
Certificated Products ACA-E ACA-E (HFP) Intelligent Analogue addressable multisensor (YBN-R/3 base) Note: Meets EN 54-5 class A1 and B and EN 54: Part 7 at 3.0%/m sensitivity setting in normal and low power mode. Intelligent analogue addressable multisensor (YBN-R/3(HFP) base) Note: Meets EN 54-5 class A1 and B and EN 54: Part 7 at 3.0%/m sensitivity setting in normal and low power mode. LPCB Ref. No. 117f/01 117f/01
Bases: YBN-R/3 base YBN-R/3 Standard base YBN-R/2NA base YBO-R/SCI Positive switching short circuit isolator base YBN-R/4IS intrinsically safe mounting base1 YCA-RL/3H2 addressable base YCA-RL/5H2 master addressable base AMU-B2 addressable base AMU-MB master addressable base YBC-RL/4H5 base YBF-RL/3J slave base YBF-RL/4H5 base1 YBK-RL/4H1A base1 YBK-RL/4H2 base1 YCA-RL/3H2M addressable base YBN-R/6SK Schottky diode base YBN-R/6 Standard base YBN-R/4 base1 YBN-R/6M Standard base YBO-BS Sounder base YBO-BSB Sounder base with Beacon YBO-R/5 base1 YBN-R/4M base1 YBO-R/5M base1 YBO-R/6R Relay base YBO-R/6RS Relay base latching with schottky diode YBO-R/6RN Relay base non latching YBO-R/6PA Protector alarms base
12 Sep 2011
199
Bases manufactured buy Hochiki Europe. All other bases manufactured by Hochiki Corporation. denotes detector/base combination is approved in low power mode also.
All Enquiries to: Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United Kingdom Tel: +44 (0) 1634 260131 Fax: +44 (0) 1634 260132
Manufacturing at (Certificate Nos 117, 117f, 117g, 117h, 117j) Hochiki Corporation, 141-1 Maehara Ejiri, Kakuda-shi, Miyagi 971-15, Japan Tel: +81 3 3444 4111 Fax: +81 3 3444 4167 E-mail: overseas@hochiki.co.jp Website: www.hochiki.co.jp
Manufacturing at (Certificate Nos 164, 164g, 164m) Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United Kingdom Tel: +44 (0) 1634 260131 Fax: +44 (0) 1634 260132 E-mail: sales @hochikieurope.com Website: www.hochikieurope.com
Manufacturing at (Certificate Nos 358, 358c) Hochiki America Corporation, 7051 Village Drive, Buena Park, California 90621, United States Tel: +1 714 522 2246 Fax: +1 714 522 2268 E-mail: overseas@hochiki.co.jp Website: www.hochiki.com
Certificate No: 117h to EN 54-7: 2000 Certificate No: 164g to EN 54-7: 2000 + A1: 2002 Certificate No: 358c to EN 54-7: 2000 + A1: 2002 + A2: 2006
ALK-E (WHT)
358c/03
ALK-E(HFP)
358c/03
ALK-EM
358c/03
ALG-EN
358c/04
200
12 Sep 2011
ALG-EN (WHT)
358c/04
ALG-ENM
358c/04
Bases YBO-R/SCI YBO-BS YBO-BSB YBO-R/6R YBO-R/6RS YBO-R/6RN YBO-R/6PA YBN-R/3 YBN-R/2NA YBN-R/6 YBN-R/6SK YBO-BS YBO-BSB Positive switching short circuit isolator base Sounder base Sounder base with Beacon Relay base Relay base latching with schottky diode Relay base non latching Protector alarms base Standard base Standard base Standard base Standard base with schottlky diode Sounder base Sounder base with Beacon
All Enquiries to: Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United Kingdom Tel: +44 (0) 1634 260131 Fax: +44 (0) 1634 260132
Manufacturing at (Certificate Nos 164, 164g, 164m) Hochiki Europe UK Limited, Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United Kingdom Tel: +44 (0) 1634 260131 Fax: +44 (0) 1634 260132 E-mail: sales@hochikieurope.com Website: www.hochikieurope.com
12 Sep 2011
201
Multi-criteria Detectors
Certificated Products TC840ME Analogue optical/thermal smoke & heat detector (14506414-007 base) Notes: 1) Meets the requirements of EN 54-7:2000 at sensitivity settings 1 to 5 2) Meets the requirements of EN 54-5:2000 at Class A1R LPCB Ref. No. 550b/03
Bases; 1450614-007 Standard analogue detector base Certificate No: 550c to EN 54-5: 2000
Bases: 14506414-007 Standard analogue detector base Certificate No: 550a to EN 54-7: 2000
202
12 Sep 2011
Multi-criteria Detectors
Certificated Products TC840MFEIS Analogue addressable photo-thermal-IR multi-criteria smoke sensor with short circuit isolator (B501AP, B524HTR & B524RTE bases) Note: Certified at the following settings: Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021: 2003 Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R Analogue addressable photo-thermal multi-criteria smoke sensor with short circuit isolator (B501AP, B524HTR & B524RTE bases) Note: Certified at the following settings: Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021: 2003 Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R Analogue addressable optical/thermal smoke & heat detector (B501, B501AP, B501DG, B524IEFT, B524HTR and B524RTE bases) Note: Meets the requirements of EN54-5: 2000 at class A1R and EN54-7: 2000 at sensitivity settings 1 to 5 Analogue addressable multi-criteria detector incorporating photoelectric, thermal and IR sensors (B501, B501AP, B501DG, B524IEFT-1, B524HTR and B524RTE bases) Note: Certified at the following settings: Normal Mode: Alarm Levels 1 to 5 (Multi-criteria): EN54-5 Class A1R, EN54-7, LPS 1279 and CEA 4021 Alarm Level 6 (Heat Only Mode): EN54-5 Class A1R Analogue addressable photo-thermal-IR multi-criteria sensor (B501AP, B501, B524IEFT-1, B524HTR & B524RTE bases) Note: Certified at the following settings: Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021: 2003 Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R Analogue addressable photo-thermal multi-criteria sensor (B501AP, B501, B524IEFT-1, B524HTR & B524RTE bases) Note: Certified at the following settings: Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021: 2003 Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R Analogue addressable multi-criteria fire detector incorporating CO, photoelectric, thermal and IR sensors (B501, B501DG and B524IEFT-1 bases) Notes: 1.) yy = Colour option ~ IV = Ivory, BK = Black, no reference indicates White 2.) Certified at the following settings: Normal Mode: Alarm Levels 1 to 5 (Multi-criteria): LPS1279 and CEA 4021 Alarm Level 6 (Heat Only Mode): Nuisance Environment Applications: Application 0,Alarm Level 4 Application 1,Alarm Level 5 Application 2,Alarm Level 4 or 5 Application 3,Alarm Level 5 Application 4,Alarm Level 5 LPCB Ref. No. 199aa/01
TC840MEIS
199aa/02
TC840ME
199p/02
TC840MFE
199p/05
TC840MFES
199p/06
TC840MES
199p/07
TC850E1009-yy
199t/01
LPS1279 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021
12 Sep 2011
203
Bases: B501 standard analogue detector base B501AP intelligent detector base B524IEFT analogue short circuit isolator base B524IEFT-1 analogue short circuit isolator base B524HTR heater base B524RTE latching relay base
Beam Detectors
Certificated Products TC847A1004EUR 100m analogue addressable reflective IR smoke beam detector with self-test facility and short circuit isolator feature Note: meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 and Acclimate levels 1 & 2 LPCB Ref. No. 199w/02
Certificate No: 199n to EN 54-5: 2000 + A1: 2002 Certificate No: 199n-(cl-1) to EN 54-5: 2000 + A1: 2002 Certificate No: 199ac-(cl-1) to EN 54-5: 2000 + A1: 2002 & EN 54-17: 2005 Certificate No: 199ac to EN 54-5: 2000 + A1: 2002 & EN 54-17: 2005
Bases: SIGI-IBS Isolator base SIGA-SB Standard base SIGA-SB4 Standard base with trim skirt SIGA-RB Relay base B501 analogue detector base B501AP intelligent sensor base B501DG analogue deep base B524IEFT analogue short circuit isolator base B524IEFT-1 analogue short circuit isolator base B524HTR heater base B524RTE latching relay base
204
12 Sep 2011
TC806ES1012
199m/10
Bases: B501 Analogue detector base B501DG Analogue deep base B501AP Intelligent detector base B524IEFT Analogue short circuit isolator base B524IEFT-1 Analogue short circuit isolator base B524HTR Heater Base B524RTE Latching relay base SIGI-IBS Isolator base SIGA-SB Standard Base SIGA-SB4 Standard base with trim skirt SIGA-RB Relay base SIGA-RB4 Relay base with trim skirt
Smoke Detectors
Certificated Products XLS-IPHSI Intelligent analogue addressable thermally enhanced photoelectric and ionisation smoke detector (SIGI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB, SIGA-RB4, SIGA-IB, SIGA-IB4 & SIGA-AB4G bases) Notes: 1) Meets the requirements of EN 54-7:2000 at sensitivity settings 1.0%/ft, 2%/ft, 2.5%/ft, 3%/ft, and 3.5%/ft. 2) The SIGA-LED indicator is approved for use with the SIGA-SB and SIGA-SB4 bases. Intelligent thermally enhanced photoelectric smoke detector (SIGA-SB, SIGA-SB4, SIGARB and SIGA-RB4 bases) Note: Meets the requirements of EN54-7: 2000 at sensitivity settings 1.0%/ft, 2%/ft, 2.5%/ft, and 3/5%/ft. Intelligent ionisation smoke detector (SIGI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB and SIGA-RB4 bases) LPCB Ref. No. 262s/01
XLS-PHSI
262s/02
XLS-ISI
262t/01
12 Sep 2011
205
XLS-PSI
Bases SIGI-IBS isolator base SIGA-SB standard base SIGA-SB4 standard base with trim skirt SIGA-RB relay base SIGA-RB4 relay base
Heat Detectors
Certificated Products XLS-HFSI XLS-HRSI Intelligent class A2S fixed heat detector (SIGI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB and SIGA-RB4 bases) Intelligent class A1 rate of rise heat detector (SIBI-IBS, SIGA-SB, SIGA-SB4, SIGA-RB, and SIGA-RB4 bases) LPCB Ref. No. 262u/01 262u/02
Bases SIGI-IBS Isolator base SIGA-SB Standard base SIGA-SB4 Standard base with trim skirt SIGA-RB Relay base
Multi-criteria Detectors
Certificated Products AH-0315-2 AH-0315-3 AH-0315-4 Bases: AHMB-031 mounting base (2 wire) Optical smoke and class A2 heat detector (AHMB-031 Base) (3 wire) Optical smoke and class A2 heat detector (AHMB-031 Base) (4 wire) Optical smoke and class A2 heat detector (AHMB-031 Base) LPCB Ref. No. 506b/01 506b/02 506b/03
206
12 Sep 2011
Flame Detectors
Certificated Products 40/40R Conventional Class 1 single IR flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.40/40R-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 1 triple IR (IR3) flame detector Notes: 1. Meets the requirements of EN 54-10: 2002 Class 1 at sensitivity setting 2 (default) only. 2. The device is available with the following variant options (variants are identified by 5 letters or numbers following the standard model number outlined respectively below e.g.40/40I-abcde) a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 1 quad IR flame detector Notes: 1. Meets the requirements of EN 54-10: 2002 Class 1at sensitivity setting 2 (default) only. 2. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.40/40M-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 2 UV/IR flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below LPCB Ref. No. 911a/01
40/40I
911a/02
40/40M
911a/03
40/40L4B
911a/04
12 Sep 2011
207
Conventional Class 2 UV/IR flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.40/40L4-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 2 UV/IR flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.40/40LB-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 2 UV/IR flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.40/40L-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 2 UV flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.40/40UB-abcde): a. Wiring options 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 2 UV flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.40/40U-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA
40/40LB
911a/06
40/40L
911a/07
40/40UB
911a/08
40/40U
911a/09
208
12 Sep 2011
Smoke Detectors
Certificated Products ID100 Conventional optical smoke detector (EB0010 and EB0020 bases). Note: 1) Meets EN 54-7:2000 with low, medium-low, medium-high and high sensitivities. LPCB Ref. No. 991c/01
ED100
Analogue addressable optical smoke detector with short circuit isolator (EB0010 and EB0020 bases). Note: 1) Meets EN 54-7:2000 with low, medium-low, medium-high and high sensitivities.
991d/01
Bases: EB0010 Standard base EB0020 Relay base Certificate No: 991f to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005 Certificate No: 991e to EN 54-5: 2000 + A1:2002
Heat Detectors
Certificated Products ID200 Conventional class P heat detector (EB0010 and EB0020 bases). Note: 1) Meets the requirements of EN54-5:2000 at class A1R & class B. LPCB Ref. No. 991e/01
ED200
Analogue addressable class P heat detector with short circuit isolator (EB0010 and EB0020 bases). Note: 1) Meets the requirements of EN54-5:2000 at class A1R & class B.
991f/01
Certificate No: 991b to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA4021: 2003 and EN 54-17: 2005 Certificate No: 991a to EN 54-5: 2000 + A1:2002, EN 54-7: 2000 + A1:2002 + A2:2006 and CEA4021: 2003
12 Sep 2011
209
ED300
991b/01
Note: 1) Meets EN 54-7:2000 with low, medium-low, medium-high and high sensitivities. 2) Meets the requirements of EN 54-5:2000 at class A1R & class B.
Senator 100
For compliance with Clause 5.10 of EN54-20:2006, the detector shall be supplied with power from a power supply complying with EN54-4. 2) The approval of the detector is conditional upon the following requirements: - Design, installation and commissioning are performed in accordance with the system design manual and instructions. - The device is approved for sensitivity Classes A, B and C for sensitivities up to 0.31%/m. The Class of any pipe/hole configuration and detector sensitivity must be determined using PipeCAD. High sensitivity aspirating smoke detector Notes: 1)
404c/02
Senator 200
Senator 200
For compliance with Clause 5.10 of EN54-20:2006, the detector shall be supplied with power from a power supply complying with EN54-4. 2) The approval of the detector is conditional upon the following requirements: - Design, installation and commissioning are performed in accordance with the system design manual and instructions. - The device is approved for sensitivity Classes A, B and C for sensitivities up to 0.62%/m. The Class of any pipe/hole configuration and detector sensitivity must be determined using PipeCAD. High sensitivity aspirating smoke standard detector (Senator 200 Stand Alone Command Module Ancillary) Notes: 1) For compliance with Clause 5.10 of EN54-20:2006, the detector shall be supplied with power from a power supply complying with EN54-4. 2) The approval of the detector is conditional upon the following requirements: - Design, installation and commissioning are performed in accordance with the system design manual and instructions. - The device is approved for sensitivity Classes A, B and C for sensitivities up to 0.62%/m, 1.95%/m and 4.65%/m respectively. The Class of any pipe/hole configuration and detector sensitivity must be determined using PipeCAD. High sensitivity aspirating smoke command module detector Notes:
404c/03
404c/04
210
12 Sep 2011
Senator 200
404c/05
404c/02
Stratos HSSD 2
404c/03
Stratos HSSD 2
404c/04
12 Sep 2011
211
Stratos HSSD 2
404c/05
Stratos Nano
404c/06
Smoke Detectors
Certificated Products FC650/O Conventional Photo Detector (FC600/B, FC600/BR and FC600/BRD bases) LPCB Ref. No. 928e/02
Universal adaptor base Universal adaptor base with resistor Universal adaptor base with resistor and Schottky diode
Heat Detectors
Certificated Products FC650/TDIFF/57 FC650/TMAX/78 Conventional Class A1R Thermal Detector (FC600/B, FC600/BR and FC600/BRD bases) Conventional Class B Thermal Detector (FC600/B, FC600/BR and FC600/BRD bases) LPCB Ref. No. 928d/02 928d/02
212
12 Sep 2011
Universal adaptor base Universal adaptor base with resistor Universal adaptor base with resistor and Schottky diode
12 Sep 2011
213
Multi-criteria Detectors
Certificated Products MG-9400 Intelligent analogue addressable system class A1R multisensor detector (MG-3510 base) LPCB Ref. No. 926c/01
Bases: B501 standard analogue detector base B501DG analogue deep base B524IEFT analogue short circuit isolator base B501AP intelligent sensor base B524IEFT-1 short circuit isolator B524HTR heater base B524RTE latching relay base HRZ-1000BSD standard base with Schottky diode Certificate No: 199p to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 & CEA 4021: 2003 Certificate No: 199aa to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002, CEA 4021: 2003 & EN 54-17: 2005
Multi-criteria Detectors
Certificated Products MI-PTIR-S2I Analogue addressable photo-thermal-IR multi-criteria smoke sensor with short circuit isolator (B501AP, B524HTR and B524RTE bases) LPCB Ref. No. 199aa/01
214
12 Sep 2011
MI-PTSE-S2I
199aa/02
MI-PTSE
199p/02
HRZ-1002 MI-PTIR
199p/04 199p/05
MI-PTIR-S2
199p/06
MI-PTSE-S2
199p/07
12 Sep 2011
215
Bases: B501 analogue detector base B501DG analogue deep base B524IEFT analogue short circuit isolator base B501AP intelligent sensor base B524IEFT-1 short circuit isolator base B524HTR heater base B524RTE latching relay base HRZ-1000BSD standard base with Schottky diode Certificate No: 199w to EN 54-12: 2002 and EN 54-17: 2005
Beam Detectors
Certificated Products MI-LPB2 Analogue optical beam detector with short circuit isolator feature Note: meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 and Acclimate levels 1 & 2 LPCB Ref. No. 199w/01
Multi-criteria Detectors
Certificated Products MI-PTSE Analogue optical/thermal smoke & heat detector (MI-B501 base) Notes: 1) Meets the requirements of EN 54-7:2000 at sensitivity settings 1 to 5 2) Meets the requirements of EN 54-5:2000 at Class A1R LPCB Ref. No. 550b/03
Bases: MI-B501 Standard analogue detector base Certificate No: 550c to EN 54-5: 2000 + A1: 2002
Bases: MI-B501 Standard analogue detector base Certificate No: 550a to EN 54-7: 2000 + A1: 2002
216
12 Sep 2011
MSA AUER
Thiemannstrae 1, 12059 Berlin, Germany Tel: +49 30 6886 2531 Fax: +49 30 6886 2582 E-mail: axel.schubert@auer.de Website: www.msa-auer.de
Certificate No: 911a-(cl-2) to EN 54-10: 2002 + A1: 2005
Flame Detectors
Certificated Products 4R Conventional Class 1 single IR flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.4R-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 1 triple IR (IR3) flame detector Notes: 1. Meets the requirements of EN 54-10: 2002 Class 1 at sensitivity setting 2 (default) only. 2. The device is available with the following variant options (variants are identified by 5 letters or numbers following the standard model number outlined respectively below e.g.4I-abcde) a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 1 quad IR flame detector Notes: 1. Meets the requirements of EN 54-10: 2002 Class 1 at sensitivity setting 2 (default) only. 2. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.4M-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 2 UV/IR flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.4L4B-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 2 UV/IR flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.4L4-abcde): a. Wiring options - 1 to 5 LPCB Ref. No. 911a/01
4I
911a/02
4M
911a/03
4L4B
911a/04
4L4
911a/05
12 Sep 2011
217
Conventional Class 2 UV/IR flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.4LB-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 2 UV/IR flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.4L-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 2 UV flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.4UB-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 2 UV flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.4U-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA
911a/06
4L
911a/07
4UB
911a/08
4U
911a/09
Heat Detectors
Certificated Products DET-C103 DET-A103 Conventional Class A1R heat detector (DZ-03 base) Intelligent Class A1R heat detector (DZ-03 base) LPCB Ref. No. 548c/01 548c/02
Bases:
218
12 Sep 2011
Bases: DZ-03 Standard detector base Certificate No: 548k-(cl-6) to EN 54-12: 2002
Beam Detectors
Certificated Products DET-105RB Intelligent Optical Beam Detector Notes: 1: Meets the requirements of EN 54-12 at the following sensitivity settings: Level 1 1.61 dBLevel 2 2.31dB LPCB Ref. No. 548k/01
Multi-Criteria Detectors
Certificated Products NV-I-MS Analogue addressable multisensor detector (NV-IA-SB mounting base) Notes: 1) Certificated at the following settings: Mode 1 - High sensitivity smoke detector with standard heat enhancement Mode 2 - Smoke detection only Mode 3 - Medium sensitivity smoke detector with standard heat enhancement Mode 4 - Low sensitivity smoke detector with high heat enhancement Mode 5 - Class A1 heat detector Also approved in conventional alarm modes 1, 2, 3, 4 and 5. LPCB Ref. No. 010h/01
Bases: NV-IA-SB Mounting Base Certificate No: 010p-(cl-1) to EN 54-5: 2000 +A1: 2002
NV-C-H-A1R
010p/05
12 Sep 2011
219
Bases STB-4 Standard mounting base STB-4SE-EV mounting base STB-4SE Standard deep mounting base STB-4SD Schottky diode mounting base STB-4-SE-24VR Relay mounting base UB-4 Universal mounting base 4 terminal UB-5 Universal mounting base 5 terminal UB-4-EV Universal base UB-4SD Universal base with Shottky diode
220
12 Sep 2011
Bases UB-4 Universal base UB-4-EV Universal base UB-4SD Universal base with Shottky diode STB-4SE-EV mounting base
Certificate No: 041g to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1:2002 + A2: 2006 and CEA4021: 1999
Multi-criteria Detectors
Certificated Products EV-PH Analogue addressable optical smoke / class A1R heat detector (UB-4,UB-4-EV,UB-4SD and STB-4SE-EV bases) Note: Meets the requirements of EN 54-7 at Lowest and Highest sensitivity settings. LPCB Ref. No. 041g/01
Bases UB-4 Universal base UB-4-EV Universal base UB-4SD Universal base with Shottky diode STB-4SE-EV mounting base
Smoke Detectors
Certificated Products EVC-P ST-P-OM ST-PY-AS EV-P Conventional optical smoke detector (STB-4-SE-24VR,STB-4SE, STB-4SE-EV,UB-4,UB-4-EV and UB-4SD bases) Conventional optical smoke detector (STB-4-SE-24VR, STB-4SE ,STB-4, UB-4 , UB-4R470 and UB-4SDR-470 bases) Analogue addressable photoelectric smoke detector ,STB-4 and UB-4 bases) Note: Meets the requirements of EN 54-7 at Lowest and Highest sensitivity settings. Analogue addressable photoelectric smoke detector UB-4SD bases) Note: Meets the requirements of EN 54-7 at Lowest and Highest sensitivity settings only. LPCB Ref. No. 842a/01 842a/02 842a/03 842a/04
Bases STB-4SE-EV mounting base STB-4SE Standard deep base STB-4-SE-24VR Relay base UB-4 universal base UB-4-EV universal base
12 Sep 2011
221
NFX-OPT ECO1003ABL
199m/10 199m/11
Bases: B501 base B401 base B501DG deep base B5241EFT short circuit isolator base B524IEFT-1 analogue short circuit isolator base B524HTR heater base B524RTE latching relay base B501AP Intelligent detector base Certificate No: 199n to EN 54-5: 2000 + A1:2002 Certificate No: 199ac to EN 54-5: 2000 + A1: 2002 & EN 54-17: 2005
222
12 Sep 2011
ECO1005ABL
199n/19
ECO1005TABL
199n/20
Bases: B501 base B401 base B401R standard base with resistor B401RSD standard base with resistor and schottky diode B401SD standard base with schottky diode B401DG deep base B501AP intelligent sensor base B524IEFT-1 analogue short circuit isolator base B524HTR heater base B524RTE latching relay base Certificate No: 199p to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 & CEA 4021: 2003 Certificate No: 199t to LPS 1279 - 1.0: 2006, EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 & CEA 4021: 2003 Certificate No: 199aa to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002, CEA 4021: 2003 & EN 54-17: 2005
Multi-criteria Detectors
Certificated Products NFXI-SMT3 Analogue addressable photo-thermal-IR multi-criteria smoke sensor with short circuit isolator (B501AP, B524HTR & B524RTE bases) Note: Certified at the following settings: Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021: 2003 Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R Analogue addressable photo-thermal multi-criteria smoke sensor with short circuit isolator (B501AP, B524HTR & B524RTE bases) Note: Certified at the following settings: Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021: 2003 Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R Analogue addressable optical/thermal smoke & heat detector (B501, B501DG and B5241EFT bases) Conventional photoelectric/thermal detector (B401 base) Note: Meets the requirements of EN54-7: 2000 at "High", 'Medium' and 'Low' sensitivity settings Analogue addressable multi-criteria detector incorporating photoelectric, thermal and IR sensors (B501, B501DG and B524IEFT-1 bases) Note: Certified at the following settings: Normal Mode: Alarm Levels 1 to 5 (Multi-criteria): EN54-5 Class A1R, EN54-7 and CEA 4021 Alarm Level 6 (Heat Only Mode): EN54-5 Class A1R Analogue addressable photo-thermal-IR multi-criteria sensor (B501AP, B501, B524IEFT1, B524HTR & B524RTE bases) Note: Certified at the following settings: LPCB Ref. No. 199aa/01
NFXI-SMT2
199aa/02
NFX-SMT3
199p/06
12 Sep 2011
223
ECO1002ABL
199p/08
IRX-751CTEM
199t/01
EN54-7, LPS1279 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021
Beam Detectors
Certificated Products LPB-400 Analogue optical beam detector with short circuit isolator feature. Note: meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 and Acclimate levels 1 & 2 Analogue optical beam detector with short circuit isolator feature. Note: meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 and Acclimate levels 1 & 2 Analogue optical beam detector with self test facility and short circuit isolator feature. Note: meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 and Acclimate levels 1 & 2 LPCB Ref. No. 199w/01
LPB-700
199w/01
LPB-700T
199w/02
224
12 Sep 2011
Multi-criteria Detectors
Certificated Products SDX-751TEM Analogue optical/thermal smoke & heat detector (B501, B501DG and B5241EFT-1 bases) Notes: 1) Meets the requirements of EN 54-7:2000 at sensitivity settings 1 to 5 2) Meets the requirements of EN 54-5:2000 at Class A1R LPCB Ref. No. 550b/03
Bases: B501 Standard base B501DG Deep analogue detector base B5242EFT-1 Short circuit islolator base
B501 Standard base B501DG Deep analogue detector base B542IEFT-1 Short circuit islolator base Certificate No: 550a to EN 54-7: 2000 + A1: 2002
Bases: B501 standard analogue detector base B501DG deep analogue detector base B5241EFT-1 analogue short circuit isolator base
OG Elektronik
Sanayi Mah., 636 Sok., Erol Apt. 11/3, Antalya, Turkey Tel: +9 0242 344 2500 Fax: +9 0242 344 2120 E-mail: info@og.com.tr; ahmet@og.com.tr Website: www.og.com.tr
Certificate No: 928a-(cl-1) to EN 54-5: 2000 + A1: 2002 and EN 54 -17: 2005 Certificate No: 928d-(cl-1) to EN 54-5: 2000 + A1: 2002
12 Sep 2011
225
Bases FF BS200 Mounting base (with link resistor) FF UBR200 Universal adaptor base with resistor FF BRD200 Universal adaptor base with resistor and Schottky diode
Certificate No: 928b-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54 -17: 2005 Certificate No: 928e-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006
Smoke Detectors
Certificated Products FF O200 Analogue addressable photoelectric smoke detector with short circuit isolator (FF BS200 base) Notes 1. Meets the requirements of EN 54-7 at the following sensitivity settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low FF O200L Analogue addressable optical smoke detector (FF BS200 base) Notes 1. Meets the requirements of EN 54-7 at the following sensitivity settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low FF O1000 Conventional photo smoke detector (FF UBR200 and FF BRD200 bases) 928e/02 928e/01 LPCB Ref. No. 928b/01
Bases FF BS200 Mounting base (with link resistor) FF UBR200 Universal adaptor base with resistor FF BRD200 Universal adaptor base with resistor and Schottky diode
Certificate No: 928c-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54 -17: 2005 & CEA 4021: 2003 Certificate No: 928f-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006
Multi-sensor Detectors
Certificated Products FT OT200 Analogue addressable Class P heat and photoelectric smoke multi-sensor detector with short circuit isolator (FF BS200 base) Notes: 1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi Criteria Level 1 (most sensitive) Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 2 Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 3 Thermally enhanced smoke detection with Class A1 LPCB Ref. No. 928c/01
226
12 Sep 2011
FF OT200L
928f/01
Pelco Finland Oy
Kalkkipellontie 6, PO Box 415, Fl-02601 Espoo, Finland Tel: +358 10 446 511 Fax: +358 10 446 5103 Website: www.pelco.com/nordic
Certificate No: 199u to EN 54-12: 2002 Certificate No: 199w to EN 54-12: 2002 and EN 54-17: 2005
Beam Detectors
Certificated Products EB-6500R Conventional optical beam detector Note: 1. Meets the requirements of EN 54-12: 2002 at sensitivity levels 1,2,3,4 & Acclimate levels 1 & 2 Conventional optical beam detector with self test facility Note: 1. Meets the requirements of EN 54-12: 2002 at sensitivity levels 1,2,3,4 & Acclimate levels 1 & 2 Analogue optical beam detector with short circuit isolator feature Note: meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 and Acclimate levels 1 & 2 Analogue optical beam detector with self test facility and short circuit isolator feature Note: meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1, 2, 3, 4 and Acclimate levels 1 & 2 LPCB Ref. No. 199u/01
EB-6500RS
199u/02
EB-6500 EB-6500S
199w/01 199w/02
12 Sep 2011
227
Bases: B401 standard base B401DG deep base B401R standard base with 470 ohm resistor B401SD standard base with schottky diode B401RSD standard base with 470 ohm resistor and schottky diode B501 analogue sensor base B501AP intelligent detector base B501DG analogue sensor deep base B524IEFT analogue sensor isolator base B524IEFT-1 analogue short circuit isolator base B524HTR heater base B524RTE latching relay base
Certificate No: 199p to EN54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 & CEA 4021: 2003 Certificate No: 199t to LPS 1279 - 1.0: 2006, EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 & CEA 4021: 2003
ED2351TEM
199p/03
ESMI2251TLE
199p/05
ESMI2251CTLE
199t/01
228
12 Sep 2011
Note: Certified at the following settings: Normal Mode: Alarm Levels 1 to 5 (Multi-criteria) EN54-5 Class A1R, EN54-7, LPS1279 and CEA 4021 Alarm Level 6 (Heat Only Mode): EN54-5 Class A1R Nuisance Environment Applications: Application 0, Alarm Level 4 Application 1, Alarm Level 5 Application 2, Alarm Level 4 or 5 Application 3, Alarm Level 5 Application 4, Alarm Level 5 Application 5, Alarm Level 5 Application 6, Alarm Level 5 Bases: B401 standard base B401DG deep base B401R standard base with 470 ohm resistor B401SD standard base with schottky diode B401RSD standard base with 470 ohm resistor and schottky diode B501 standard analogue detector base B501AP intelligent detector base B501DG Deep detector base B524IEFT Short circuit isolator base B524HTR Heater base B524RTE Latching relay base
EN54-7, LPS1279 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021
12 Sep 2011
229
Certificate No: 199m to EN 54-7: 2000 + A1: 2002 + A2: 2006 Certificate No: 199ab to EN 54-7: 2000 + A1: 2002 & EN 54-17: 2005
199m/05 199m/07
1151EIS 22051E
199m/08 199m/10
Bases: 2020B standard base 2020DB deep base 2020BSD standard base with schottky diode 2020DBSD deep base with schottky diode B401 standard base B401DG deep base B401R standard base with 470 ohm resistor B401SD standard base with schottky diode B401RSD standard base with 470 ohm resistor and schottky diode B501 standard analogue detector base B501AP intelligent detector base B501DG analogue sensor deep base B524IEFT analogue sensor isolator base B524IEFT-1 analogue short circuit isolator base B524HTR heater base B524RTE latching relay base ECO1000B standard base. ECO1000BSD standard base with schottky diode. ECO1000BR standard base, 470 ohm resistor. ECO1000BRSD standard base, 470 ohm resistor and schottky diode. ECO1000BR680 standard base, 680 ohm resistor. ECO1000BR680SD standard base, 680 ohm resistor and schottky diode. ECO1000BR1000 standard base, 1000 ohm resistor. ECO1000BR1000SD standard base, 1000 ohm resistor and schottky diode. ECO1000DB deep base ECO1000DBR deep base with 470 ohm resistor
230
12 Sep 2011
5351E 4351E ECO1004T Vision 2020F Vision 2020HF Vision 2020R 5451EIS 5351TE 52051RE 52051HTE 52051E
199n/07 199n/08 199n/09 199n/10 199n/11 199n/12 199n/13 199n/14 199n/15 199n/16 199n/17
Bases: 2020B standard base 2020DB deep base 2020BSD standard base with schottky diode 2020DBSD deep base with schottky diode B401 standard base B401DG deep base B401R standard base with 470 ohm resistor B401SD standard base with schottky diode B401RSD standard base with 470 ohm resistor and schottky diode B401R1000 standard base with 1000 ohm resistor B401DGR deep base with 470 ohm resistor B401DGR1000 deep base with 1000 ohm resistor B401DGSD deep base with schottky diode B501 standard analogue detector base B501AP intelligent detector base B501DG analogue sensor deep base B524IEFT analogue sensor isolator base B524IEFT-1 analogue short circuit isolator base B524HTR heater base B524RTE latching relay base
12 Sep 2011
231
Multi-criteria Detectors
Certificated Products 22051TLEI Analogue addressable photo-thermal-IR multi-criteria smoke sensor with short circuit isolator (B501AP, B524HTR & B524RTE bases) Note: Certified at the following settings: Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021: 2003 Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R Analogue addressable photo-thermal multi-criteria smoke sensor with short circuit isolator (B501AP, B524HTR & B524RTE bases) Note: Certified at the following settings: Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021: 2003 Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R Conventional photo-thermal detector (ECO1000B, ECO1000BSD, ECO1000BR, ECO1000BRSD, ECO1000BR680, ECO1000BR680SD, ECO1000BR1000, ECO1000BR1000SD, ECO1000DB, ECO1000DBR and ECO1000DBRSD bases) Note :Meets the requirements of EN54:5-2000 at class A1R and EN54:7:2000 at pre-set sensitivity Analogue addressable optical/thermal smoke & heat detector B501AP, B501DG, B524HTR and B524RTE bases) Note: Meets the requirements of EN 54-5:2000 at class A1R and EN 54-7:2000 at sensitivity settings 1 to 5 Conventional optical/thermal detector (B401, B401DG, B401R, B401SD, & B401RSD bases) Note: Meets the requirements of EN54-5:2000 at class A1R and EN54-7:2000 at 'High' 'Medium' and 'Low' sensitivity settings. Conventional photo thermal detector (2020B, 2020DB, 2020BSD and 2020DBSD bases) Analogue addressable multi-criteria detector incorporating photoelectric, thermal and IR sensors (B501, B501AP, B501DG, B524HTR and B524RTE bases) Note: Certified at the following settings: Normal Mode: Alarm Levels 1 to 5 (Multi-criteria): EN54-5 Class A1R, EN54-7 and CEA 4021 Alarm Level 6 (Heat Only Mode): EN54-5 Class A1R Analogue addressable photo-thermal-IR multi-criteria sensor (B501AP, B501, B524IEFT1, B524HTR and B524RTE bases) Note: Certified at the following settings: Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021: 2003 Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R Analogue addressable photo-thermal multi-criteria sensor (B501AP, B501, B524IEFT-1, B524HTR and B524RTE bases) Note: Certified at the following settings: Alarm levels 1 to 5 (Multi-criteria): EN 54-5: 2000 class A1R, EN 54-7: 2000 & CEA 4021: 2003 Alarm level 6 (Heat only mode): EN 54-5: 2000 class A1R Analogue addressable multi-criteria fire detector incorporating CO, photoelectric, thermal and IR sensors (B501, B501AP, B501DG, B524IEFT-1, B524HTR and B524RTE bases) Notes: 1.) xx = (Range 0-99) ~ indicates the communication software protocol LPCB Ref. No. 199aa/01
22051TEI
199aa/02
ECO1002
199p/01
2251TEM
199p/02
2351TEM
199p/03
199p/04 199p/05
22051TLE
199p/06
22051TE
199p/07
2251CTLE-xx-yy
199t/01
232
12 Sep 2011
EN54-7, LPS1279 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-7 & CEA 4021 EN54-5 Class A1R, EN54-7 & CEA 4021 EN54-5 Class A1R, LPS1279 and CEA 4021
Bases: 2020B standard base 2020DB deep base 2020BSD standard base with schottky diode 2020DBSD deep base with schottky diode B401 standard base B401DG deep base B401R standard base with 470 ohm resistor B401SD standard base with schottky diode B401RSD standard base with 470 ohm resistor and schottky diode B401R1000 standard base with 1000 ohm resistor B401DGR deep base with 470 ohm resistor B401DGR1000 deep base with 1000 ohm resistor B401DGSD deep base with schottky diode B501 standard analogue detector base B501AP intelligent detector base B501DG analogue sensor deep base B524IEFT analogue sensor isolator base B524IEFT-1 analogue short circuit isolator base B524HTR heater base B524RTE latching relay base ECO1000B standard base ECO1000BSD standard base with schottky diode ECO1000BR standard base, 470 ohm resistor ECO1000BRSD standard base, 470 ohm resistor and schottky diode ECO1000BR680 standard base, 680 ohm resistor ECO1000BR680SD standard base, 680 ohm resistor and schottky diode ECO1000BR1000 standard base, 1000 ohm resistor ECO1000BR1000SD standard base, 1000 ohm resistor and schottky diode ECO1000DB deep base ECO1000DBR deep base with 470 ohm resistor ECO1000DBRSD deep base with 470 ohm resistor and schottky diode ECO2000B mounting base
Certificate No: 199u to EN 54-12: 2002 Certificate No: 199w to EN 54-12: 2002 & EN 54-17: 2005
Beam Detectors
Certificated Products 6500R 6500RS 6500 Conventional optical beam detector Note: meets the requirements of EN 54-12: 2002 at sensitivity levels 1,2,3,4 & Acclimate levels 1 & 2 Conventional optical beam detector with self test facility Note: meets the requirements of EN 54-12: 2002 at sensitivity levels 1,2,3,4 & Acclimate levels 1 & 2 Analogue optical beam detector with short circuit isolator feature Note: meets the requirements of BS EN 54-12: 2002 at sensitivity levels 1,2,3,4 and Acclimate levels 1 & 2 LPCB Ref. No. 199u/01 199u/02 199w/01
12 Sep 2011
233
Plana Fabrega
C/Caracas, 08030, Barcelona, Spain Tel: 0034 93 243 1111 Fax: 0034 93 243 0350 E-mail: jgarcia@planafabrega.com; rseome@planafabrega.com
Certificate No: 199m to EN 54-7: 2000 + A1: 2002
Smoke Detectors
Certificated Products OPT1 Conventional photoelectric smoke detector (ECO1000B, ECO1000BSD, ECO1000BR, ECO1000BRSD, ECO1000BR680, ECO1000BR680SD, ECO1000BR1000, ECO1000BR1000SD, ECO1000DB, ECO1000DBR, ECO1000DBRSD bases) LPCB Ref. No. 199m/01
ECO1000B standard base ECO1000BSD standard base with schottky diode ECO1000BR standard base, 470 ohm resistor ECO1000BRSD standard base, 470 ohm resistor and schottky diode ECO1000BR680 standard base, 680 ohm resistor ECO1000BR680SD standard base, 680 ohm resistor and schottky diode ECO1000BR1000 standard base, 1000 ohm resistor ECO1000BR1000SD standard base, 1000 ohm resistor and schottky diode ECO1000DB deep base ECO1000DBR deep base with 470 ohm resistor ECO1000DBRSD deep base with 470 ohm resistor and schottky diode
Heat Detectors
Certificated Products TEVOL Conventional photoelectric smoke detector (ECO1000B, ECO1000BSD, ECO1000BR, ECO1000BRSD, ECO1000BR680, ECO1000BR680SD, ECO1000BR1000, ECO1000BR1000SD, ECO1000DB, ECO1000DBR, ECO1000DBRSD bases) LPCB Ref. No. 199n/01
ECO1000B standard base ECO1000BSD standard base with schottky diode ECO1000BR standard base, 470 ohm resistor ECO1000BRSD standard base, 470 ohm resistor and schottky diode ECO1000BR680 standard base, 680 ohm resistor ECO1000BR680SD standard base, 680 ohm resistor and schottky diode ECO1000BR1000 standard base, 1000 ohm resistor ECO1000BR1000SD standard base, 1000 ohm resistor and schottky diode ECO1000DB deep base ECO1000DBR deep base with 470 ohm resistor ECO1000DBRSD deep base with 470 ohm resistor and schottky diode
234
12 Sep 2011
6000PLUS/OP/SX
201ab/02
Bases: 6000/BASE standard low profile base 6000/DIB isolator base 3000/BASE Standard Base 6000PLUS/BASE, standard mounting base 6000PLUS/FFBASE, recessed mounting base N28-075-01, Plug and Play Fast Fix base N28-075-02, Plug and Play Surface base
Certificate No: 201g to EN 54-5: 2000 + A1: 2002 Certificate No: 201r to EN 54-5: 2000 Certificate No: 201w to EN 54-5: 2000 + A1: 2002 Certificate No: 201aa to EN 54-5: 2000 + A1: 2002, EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005
6000PLUS/HT/SL
201aa/02
12 Sep 2011
235
Bases: 3000/BASE standard base 6000/BASE standard low profile base 6000/DIB isolator base 6000PLUS/BASE, standard mounting base 6000PLUS/FFBASE, recessed mounting base N28-075-01, Plug and Play Fast Fix base N28-075-02, Plug and Play Surface base
Certificate No: 201j to EN 54: Part 5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 and CEA 4021: 2003 Certificate No: 201q to EN 54-5: 2000, EN 54-7: 2000 and CEA 4021 Certificate No: 201s to EN 54-5: 2000, EN 54-7: 2000 and CEA 4021 Certificate No: 201u to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA4021: 2003 Certificate No: 201x to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA4021: 2003, EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005 Certificate No: 201y to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005, CEA4021: 2003 Certificate No: 201z to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA4021: 2003, EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005 Certificate No: 201ac to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005, CEA4021: 2003
Multi-criteria Detectors
Certificated Products 6000PLUS/OPHT/I Analogue addressable multisensor detector with short circuit isolator (6000PLUS/BASE, 6000PLUS/FFBASE, N28-075-01 and N28-075-02 bases) Notes: 1) Meets the requirements of EN 54-5: 2000 at Class A2 2) Meets the requirements of EN 54-7: 2000 at the medium and low sensitivity settings Conventional optical smoke and Class A2 heat detector (3000/BASE) Analogue addressable optical smoke and Class A2 heat multisensor detector (6000/BASE & 6000/DIB bases). Note: 1) Meets requirements of EN 54-7: 2000 and CEA 4021 at the following mode settings only: i) Normal sensitivity mode ii) Low sensitivity mode Analogue addressable optical smoke, CO and Class A2 heat multisensor detector (6000/BASE & 6000/DIB bases) Notes: 1) Meets requirements of EN 54-7: 2000 and CEA 4021 at the following mode LPCB Ref. No. 201ac/01
3000/OPHT Mk II 6000/OPHT Mk II
201j/01 201q/01
6000/OPHTCO
201s/01
236
12 Sep 2011
6000PLUS/OPHT
201u/01
6000PLUS/OPHT/S
201x/01
6000PLUS/OPHT/SX
201x/02
6000PLUS/OPHT/SL
201x/03
6000PLUS/OPHT/TS
201x/04
6000PLUS/OPHT/TSX
201x/05
6000PLUS/OPHT/TSL
201x/06
6000PLUS/OPHTCO
201y/01
12 Sep 2011
237
6000PLUS/OPHTCO/S
201z/01
6000PLUS/OPHTCO/SX
201z/02
6000PLUS/OPHTCO/SL
201z/03
6000PLUS/OPHTCO/TSL
201z/04
6000PLUS/OPHTCO/TSLX
201z/05
Bases: 3000/BASE standard base 6000/BASE standard low profile base 6000/DIB isolator base 6000PLUS/BASE, standard mounting base 6000PLUS/FFBASE, recessed mounting base N28-075-01, Plug and Play Fast Fix base N28-075-02, Plug and Play Surface base
238
12 Sep 2011
Certificate No: 506b-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 ,EN 54-5: 2000 + A1: 2002 , CEA 4021: 1999
Multi-Criteria Detectors
Certificated Products SF-0315-2 SF-0315-3 SF-0315-4 Bases AHMB-031 mounting base (2 Wire) Optical smoke and class A2 heat detector (AHMB-031 Base) (3 Wire) Optical smoke and class A2 heat detector (AHMB-031 Base) (4 Wire) Optical smoke and class A2 heat detector (AHMB-031 Base) LPCB Ref. No. 506b/01 506b/02 506b/03
Sareme UAB
Naugarduko str. 32/2, Vilnius LT2006, Lithuania Tel: +3705 2135047 Fax: +3705 2333567 E-mail: valdemar@sareme.lt
Certificate No: 512d to EN 54-5: 2000
Heat Detectors
Certificated Products EA323-2 EA323-4 Conventional 2 wire 24 VDC class A2S fixed temperature and rate-of-rise heat detector (P/N854001 base) Conventional 4 wire 12VDC class A2S fixed temperature and rate-of-rise heat detector (P/N854001 base) LPCB Ref. No. 512d/01 512d/05
12 Sep 2011
239
LTS240
648b/01
Beam Detectors
Certificated Products D-A430/R Intelligent optical beam detector Notes: 1) Meets the requirements of EN 54-12 at the following sensitivity settings: Level 1 - 1.61 dB Level 2 - 2.31dB LPCB Ref. No. 548k/01
Smoke Detectors
Certificated Products D-C401 Conventional photoelectric smoke detector (DZ-03 base) LPCB Ref. No. 548d/01
240
12 Sep 2011
Heat Detectors
Certificated Products D-C402 D-A412 Bases: DZ-03 Standard detector base Conventional Class A1R heat detector (DZ-03 base) Intelligent Class A1R heat detector (DZ-03 base) LPCB Ref. No. 548c/01 548c/02
UK Sales: Siemens Building Technologies Limited, FSP Division Tel: +44 (0)1784 461616 Fax: +44 (0)1784 464646
Certificate No: 126x-(cl-1) to EN 54:7: 2000 + A1:2002 + A2:2006 Certificate No: 126ab-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005 Certificate No: 126am-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 & EN 54-17: 2005 Certificate No: 531c-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 Certificate No: 531d-(cl-1) to EN 54-7:2000 + A1:2002 + A2: 2006, EN 54-17: 2005 and CEA4021: 2003-07 Certificate No: 531e-(cl-1) to EN 54-7: 2000 + A1: 2002 + A1: 2006 and EN 54-17: 2005
DOT1131A
126am/06
DOT1152A
126am/09
R970
126x/01
12 Sep 2011
241
DOT1151A
126x/05
DOT1151A-Ex
126x/06
OP720
531e/01
OH320A
531e/02
OP320A
531e/03
Bases: Z94 base FDB221 base FDB201 base "Collective" FDB291 base attachment surface FDB292 base attachment surface wet DB720 Detector base DB721 Detector base with loop contact DB1101A base DB1131A base DB1151A base DBZ1191 base attachment SO620 Analogue addressable (AnalogPLUS) detector base SO820 Analogue addressable (Interactive) detector base SO320 base for SynovaTM 300 series detectors
242
12 Sep 2011
HI722
531f/02
HI320A HI322A
531f/03 531f/04
Bases: Z94 base DFB1190 base FDB221 base FDB201 base Collective FDB291 base attachment surface FDB292 base attachment surface wet DB720 Detector base DB721 Detector base with loop contact DB1101A base for conventional addressing DB1131A base for analogue addressing DB1151A base for interactive fire detectors SO320 base for SynovaTM 300 series detectors SO620 Analogue addressable (AnalogPLUS) detector base SO820 Analogue addressable (Interactive) detector base
Certificate No: 126ag-(cl-1) to EN 54-12: 2002 and EN 54-17: 2005 Certificate No: 126ak-(cl-1) to EN 54-12: 2002 and EN 54-17: 2005
Beam Detectors
Certificated Products FDL241-9 DLO1191 Analogue addressable beam detector with short circuit isolator (FDLB291 base) Note: Certified at sensitivity settings 30%, 50% and 65% Optical beam smoke detector with short circuit isolator (DLB1191A base) LPCB Ref. No. 126ag/01 126ak/01
12 Sep 2011
243
Flame Detectors
Certificated Products FDF241-9 FDF221-9 DF1192 Analogue addressable infra red flame detector with short circuit isolator (FDFB291 base) Note: 1. Meets EN 54-10: 2002 at Class 1 and 2 only Analogue addressable infra red flame detector with short circuit isolator (FDFB291 base) Note: 1. Meets EN 54-10: 2002 at Class 1 and 2 only Analogue addressable infra red flame detector with short circuit isolator (DFB1190 Base) Note: 1. Certificated in increased & standard sensitivity settings - Class 1 and 2 respectively. Analogue addressable infra red flame detector with short circuit isolator (DFB1190 Base) Note: 1. Certificated in increased & standard sensitivity settings - Class 1 and 2 respectively. Analogue addressable IS infra red flame detector with short circuit isolator (DFB1190 Base) Note: 1. Certificated in increased & standard sensitivity settings - Class 1 and 2 respectively. Conventional I.S. infra red flame detector (DFB 1190 base) Note: 1. Certificated in "increased" & "standard" sensitivity settings - Class 1 and 2 respectively. LPCB Ref. No. 126af/01 126af/02 126ay/01
DF1191
126ay/02
DF1151-Ex
126ay/03
DF1101-Ex
126s/03
Bases: Z94 base DFB 1190 base FDFB291 base Certificate No: 126ah-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, CEA4021: 2003 and EN 54-17: 2005
Multi-criteria Detectors
Certificated Products FDOOT241-9 Analogue addressable multisensor detector with short circuit isolator (FDB201, FDB202, FDB221, FDB222, FDB291 and FDB293 bases) Note: Meets the requirements of EN 54-5: 2000 at Class A2R & A2S and EN 54-7: 2000 at sensitivity settings: Parameter No. 1 Universal Parameter No. 2 Robust with thermal enhancement Parameter No. 3 Sensitive Parameter No. 4 Balanced with thermal enhancement Parameter No. 5 Suppression with thermal enhancement Parameter No. 6 Response with thermal enhancement Parameter No. 7 Robust / BGD with thermal enhancement Analogue addressable multisensor detector with short circuit isolator (FDB221, FDB222, FDB291 and FDB293 bases) Note: Meets the requirements of EN 54-5: 2000 at Class A2R & A2S and EN 54-7: 2000 at sensitivity settings: Parameter No. 2 Robust with thermal enhancement Parameter No. 4 Balanced with thermal enhancement Analogue addressable multisensor detector with short circuit isolator (FDB221, FDB222, FDSB291 & FDSB293 bases) Note - the following modes are approved LPCB Ref. No. 126ah/01
FDOOT221
126ah/02
FDOOTC241
126ah/03
244
12 Sep 2011
Bases: FDB221 base with stand offs FDB201 base Collective with stand offs FDB202 base Collective without stand offs FDB222 base without stand offs FDB291 base attachment surface FDB292 base attachment surface wet FDB293 base attachment surface wet
SMS
Hamilton Industrial Park, 140 Waterside Road, Leicester LE5 1TN, United Kingdom Tel: +44 (0)116 246 2000 Fax: +44 (0)116 246 2300 E-mail: Nikki.Morgan@honeywell.com Website: www.gent.co.uk
Certificate No: 042ak to EN 54-5: 2000 + A1: 20002, EN 54-3: 2001 + A1: 2002, CEA GEI 1-084: Draft 08.08.00, CEA GEI 1-052: 11.06.97 Draft 2.0,
Sen-780-ST
042ak/03
12 Sep 2011
245
SEN-710
042bf/01
Bases: SEN-700 standard base SEN-FLUSH Semi-flush fixing kit SEN-FLUSH Semi-flush mounting kit Certificate No: 042be to EN54-5: 2000 + A1: 2002, EN54-17: 2005, EN54-18: 2005 Certificate No: 042bd to EN54-7: 2000 + A1: 2002 + A2: 2006, EN54-17: 2005, EN54-18: 2005
SEN-720
042be/01
Bases: Sen-700 standard base Sen-FLUSH semi-flush fixing kit SEN-FLUSH Semi-flush mounting kit
Spectrex Inc
Peckman Industrial Park, 218 Little Falls Road, Cedar Grove, NJ 07009, United States Tel: +973 239 8389 Fax: +973 239 7614 E-mail: eric@spectrex-inc.com Website: www.spectrex-inc.com
Certificate No: 911a-(cl-1) to EN 54-10: 2002 + A1: 2005
246
12 Sep 2011
Sharpeye 40/40I
911a/02
Sharpeye 40/40M
911a/03
Sharpeye 40/40L4B
911a/04
Sharpeye 40/40L4
911a/05
Sharpeye 40/40LB
911a/06
Sharpeye 40/40L
911a/07
12 Sep 2011
247
Conventional Class 2 UV flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.40/40UB-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA Conventional Class 2 UV flame detector Notes: 1. The device is available with the following variant options (variants are identified by 5 letters/numbers following the standard model number outlined respectively below e.g.40/40U-abcde): a. Wiring options - 1 to 5 b. Maximum operating temperature - 1=75 C ; 2=85 C c. Cable entry - 1=M25 ; 2=3/4-14NPT d. Housing - S=Stainless steel ; A=Aluminium e. Approval - C= ATEX, IECEx; F= FM, CSA
40/40U
911a/09
HFI-TAE-01
928d/01
Universal adaptor base Deep adaptor base Vega adaptor base Vega deep adaptor base Universal adaptor base with shorting clip Deep adaptor base with shorting clip Vega adaptor base with shorting clip
248
12 Sep 2011
Certificate No: 928b to EN 54-7: 2000 + A1: 2002 + A2: 2006 and EN 54-17: 2005 Certificate No: 928e to EN 54-7: 2000 + A1: 2002 + A2: 2006
HFI-PAE-01
928e/01
Universal adaptor base Deep adaptor base Vega adaptor base Vega deep adaptor base Universal adaptor base with shorting clip Deep adaptor base with shorting clip Vega adaptor base with shorting clip Vega deep adaptor base with shorting clip
Certificate No: 928c to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA 4021: 2003 Certificate No: 928f to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 and CEA 4021: 2003
Multi-Sensor Detectors
Certificated Products HFI-MA-01 Analogue addressable Class P heat and photoelectric smoke multi-sensor detector with short circuit isolator (HFI-UB-01, HFI-DUB-01, HFI-DMB-01, HFI-DDB-01, HFI-UBS-01, HFI-DUBS-01, HFIDMBS-01 and HFI-DDBS-01 bases) Notes: 1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi Criteria Level 1 (most sensitive) - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 2 - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 3 - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 4 (least sensitive) - Thermally enhanced smoke detection with Class A1 heat response 2. Meets the requirements of EN 54-5 (Class A1R) at the following settings: Class A1R heat only response 3. Meets the requirements of EN 54-7 at the following settings: Optical only level 1 - High Optical only level 2 Optical only level 3 Optical only level 4 - Low LPCB Ref. No. 928c/01
12 Sep 2011
249
Universal adaptor base Deep adaptor base Vega adaptor base Vega deep adaptor base Universal adaptor base with shorting clip Deep adaptor base with shorting clip Vega adaptor base with shorting clip Vega deep adaptor base with shorting clip
System Sensor
3825 Ohio Avenue, Saint Charles, Illinois 60174, United States Tel: +1 630 377 6580 Fax: +1 630 377 7245 Website: www.systemsensor.com European Sales Enquiries: System Sensor Europe Tel: +44 (0)1403 891920 Fax: +44 (0)1403 891921
Bases: B501 analogue sensor base B501AP intelligent detector base B501DG deep base B524IEFT short circuit isolator base B524IEFT-1 short circuit isolator base
250
12 Sep 2011
FL/2351E
550a/01
Bases: B401 standard base B401DG deep base B401R standard base with schottky diode B401SD standard base with schottky diode B401RSD standard base with 470 ohm resistor and schottky diode B401R1000 standard base with 1000 ohm resistor B401DGR deep base with 470 ohm resistor B401DGR1000 deep base with 1000 ohm resistor B401DGSD deep base with schottky diode ECO1000B standard base ECO1000BSD standard base with schottky diode ECO1000BR standard base, 470 ohm resistor ECO1000BRSD standard base, 470 ohm resistor and schottky diode ECO1000BR680 standard base, 680 ohm resistor ECO1000BR680SD standard base, 680 ohm resistor and schottky diode ECO1000BR1000 standard base, 1000 ohm resistor ECO1000BR1000SD standard base, 1000 ohm resistor and schottky diode B501 standard analogue detector base B501DG deep analogue detector base B5241EFT-1 analogue short circuit isolator base FL/B401 standard base FL/1000B standard base
Certificate No: 550b to EN 54-5: 2000 + A1: 2002, EN 54-7:2000 + A1: 2002 & CEA 4021: 1999
FL/2351TEM
550b/01
12 Sep 2011
251
FL/1002
550b/02
2251TEM
550b/03
Bases: B401 standard base B401DG deep base B401R standard base with schottky diode B401SD standard base with schottky diode B401RSD standard base with 470 ohm resistor and schottky diode B401R1000 standard base with 1000 ohm resistor B401DGR deep base with 470 ohm resistor B401DGR1000 deep base with 1000 ohm resistor B401DGSD deep base with schottky diode ECO1000B standard base ECO1000BSD standard base with schottky diode ECO1000BR standard base, 470 ohm resistor ECO1000BRSD standard base, 470 ohm resistor and schottky diode ECO1000BR680 standard base, 680 ohm resistor ECO1000BR680SD standard base, 680 ohm resistor and schottky diode ECO1000BR1000 standard base, 1000 ohm resistor ECO1000BR1000SD standard base, 1000 ohm resistor and schottky diode B501 standard analogue detector base B501DG deep analogue detector base B5241EFT-1 analogue short circuit isolator base FL/B401 standard base FL/1000B standard base
FL/5351E 4351E
550c/01 550c/02
252
12 Sep 2011
Flame Detectors
Certificated Products 016589 016689 016579 016679 016519 016619 016581 016681 016571 016511 016611 016591 016521 Conventional IR Flame Detector (007127) Note: Meets EN 54-10:2002 at Class 1 only Analogue Addressable IR 3 Flame Detector (007127) Note: Meets EN 54-10:2002 at Class 1 only Conventional IR 3 Intrinsically Safe Flame Detector (007127) Note: Meets EN 54-10:2002 at Class 1 only Analogue Addressable IR 3 Intrinsically Safe Flame Detector (007127) Note: Meets EN 54-10:2002 at Class 1 only Conventional IR 3 (Exd) Flameproof Flame Detector (007127) Note: Meets EN 54-10:2002 at Class 1 only Analogue Addressable IR 3 (Exd) Flameproof Flame Detector (007127) Note: Meets EN 54-10:2002 at Class 1 only Conventional IR2 Flame Detector (007127) Note: Meets EN 54-10: 2002 at Class 1 only Analogue Addressable IR2 Flame Detector (007127) Note: Meets EN 54-10: 2002 at Class 1 only Conventional IR2 Intrinsically Safe Flame Detector (007127) Note: Meets EN 54-10: 2002 at Class 1 only Conventional IR2 (Exd) Flameproof Flame Detector (007127) Note: Meets EN 54-10: 2002 at Class 1 only Analogue Addressable IR2 (Exd) Flameproof Flame Detector (007127) Note: Meets EN 54-10: 2002 at Class 1 only Conventional UV/IR 2 Flame Detector (007127) Note: Meets EN 54-10: 2002 at Class 1 only Conventional UV/IR 2 (Exd) Flameproof Flame Detector (007127) Note: Meets EN 54-10: 2002 at Class 1 only
3
LPCB Ref. No. 729a/01 729a/02 729a/03 729a/04 729a/05 729a/06 729a/07 729a/08 729a/09 729a/10 729a/11 729a/12 729a/13
12 Sep 2011
253
Base FSV-CDB Universal adaptor base with resistor and Schottky diode
Base FSV-CDB Universal adaptor base with resistor and Schottky diode
Teledata S.r.l.
Via Giulietti 8, Milan 20132, Italy Tel: +39 02-27201352 Fax: +39 02-2593704 E-mail: info@teledata-i.com Website: www.teledate-i.com
Certificate No: 928a-(cl-6) to EN 54-5: 2000 + A1: 2002 and EN 54-17: 2005 Certificate No: 928d-(cl-6) to EN 54-5: 2000 + A1: 2002
SF3500E
928d/01
Universal adaptor base Vega adaptor base Universal adaptor base with shorting clip Vega adaptor base with shorting clip
254
12 Sep 2011
SF1000E
928e/01
SF2000E
928f/01
Universal adaptor base Vega adaptor base Universal adaptor base with shorting clip Vega adaptor base with shorting clip
Certificate No: 928c-(cl-6) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006, EN 54-17: 2005 and CEA 4021: 2003
Multi-Criteria Detectors
Certificated Products SF2000 Analogue addressable Class P heat and photoelectric smoke multi-sensor detector with short circuit isolator (BS100, BS100E, BS100/S and BS100E/S bases) Notes: 1. Meets the requirements of EN 54-5 (Class A1) & EN 54-7 at the following settings: Multi Criteria Level 1 (most sensitive) - Thermally enhanced smoke detection with Class A1 heat response Multi Criteria Level 2 - Thermally enhanced smoke detection with Class A1 heat response LPCB Ref. No. 928c/01
12 Sep 2011
255
2.
3.
Universal adaptor base Vega adaptor base Universal adaptor base with shorting clip Vega adaptor base with shorting clip
Heat Detectors
Certificated Products 801H 601H-R 601H-F MD601Ex MD611Ex 816H 611H-F 631H-F MX Digital addressable Class P heat detector (4B and 5B bases) Note: 1. Meets EN54 Part 5 for classes A1R, A2S and CR. Conventional Class A1R heat detector (4B, 4B-D and 5B bases) Conventional Class A1S heat detector (4B, 4B-D and 5B mounting bases) Conventional intrinsically safe Class A1R rate of rise heat detector (MUBEx base, 5BEx bases) Conventional intrinsically safe Class A1S fixed temperature heat detector (MUBEx base, 5BEx base) MX Digital addressable Class P heat detector (4B and 5B bases) Note: 1. Meets EN54 Part 5 for classes A1R, A2S and CR. Conventional Class A1S fixed temperature heat detector (4B, 4B-D and 5B base) Conventional Class CS fixed temperature heat detector (4B, 4B-D and 5B base) LPCB Ref. No. 681c/01 681c/02 681c/03 681c/04 681c/05 681c/06 681c/07 681c/08
Bases: 4B 4" universal mounting base 4B-D 4" diode mounting base 5B 5 Universal mounting base 5BEX Intrinsically safe detector base MUBEx Intrinsically safe detector base
Certificate No: 681j-(cl-1) to EN 54-7: 2000 + AI: 2002 + A2: 2006 and CEA4021: 1999 Certificate No: 681q-(cl-1) to EN 54-5: 2000 + A1:2002, EN 54-7: 2000 + A1:2002 + A2: 2006, LPS1274 Issue 1 & CEA 4021: 2003 Certificate No: 681b-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA4021: 2003 Certificate No: 681a-(cl-1) to EN 54-5: 2000 + A1: 2002 & Test Schedule 68297/29.0 Test schedule for Carbon Monoxide Fire Detectors Certificate No: 681e-(cl-1) to EN 54-5: 2000 + A1: 2002 & LPS1265 Iss.1.0
256
12 Sep 2011
801PH
681b/01
Note: Approved with the following mode configurations:1. Optical smoke detector at High and Normal sensitivity 2. Rate of rise heat detector at Class A1R 3. Fixed temperature heat detector at Class A2S 4. Heat enhanced optical smoke detector at High and Normal sensitivity 5. Optical smoke detector using FastLogic at High and Normal sensitivity 6. Heat enhanced optical smoke detector using FastLogic at High and Normal sensitivity 601CH 601PH MR601Tex 816PH 801PC Conventional Class A1R thermally enhanced Carbon Monoxide detector (4B, 4B-D and 5B Bases) Conventional high performance photoelectric smoke detector (4B, 4B-D and 5B bases) Conventional intrinsically safe high performance photoelectric smoke detector with heat enhancement (MUBEx base, 5BEx bases) MX Digital addressable photoelectric detector with heat enhancement (4B and 5B bases) Note: 1. Meets EN54 Part 7 at Normal sensitivity Analogue addressable combined optical, heat and CO fire detector (4B, 5B and DHM-5B bases) Notes: 1. Certificated at the following modes: Mode 0 - Universal multi-criteria (smoke /heat/CO) wide spectrum fire detection with Class A2S heat detection Mode 1 - Multi-criteria (smoke /heat/CO) fire detection with high false alarm immunity with Class A2S heat detection Mode 2 - Class A1R heat detection Mode 3 - Thermally enhanced smoke detection Mode 4 - Thermally enhanced CO detection 2. Meets the requirements of LPS 1274 at modes 0 and 4, CEA 4021 and EN 54-7 at modes 0, 1 and 3, and EN 54-5 at modes 0, 1, and 2. Analogue addressable combined optical, heat and CO fire detector ( marine version) (4B, 5B and DHM-5B bases) Notes: 1. Certificated at the following modes: Mode 0 - Universal multi-criteria (smoke /heat/CO) wide spectrum fire detection with Class A2S heat detection Mode 1 - Multi-criteria (smoke /heat/CO) fire detection with high false alarm immunity with Class A2S heat detection Mode 2 - Class A1R heat detection Mode 3 - Thermally enhanced smoke detection Mode 4 - Thermally enhanced CO detection 2. Meets the requirements of LPS 1274 at modes 0 and 4, CEA 4021 and EN 54-7 at modes 0, 1 and 3, and EN 54-5 at modes 0, 1, and 2. 681e/01 681j/01 681j/02 681j/03 681q/01
811PC
681q/02
12 Sep 2011
257
Certificate No: 763a to EN 54-10: 2002 Certificate No: 681r-(cl-1) to EN 54-10: 2002 Certificate No: 018e-(cl-1) to EN 54-10: 2001+ A1:2005
Flame Detectors
Certificated Products S231i+ S231f+ S241i+ S241f+ S251i+ S251f+ S261f+ S271f+ S271i+ 601F 601FEx 801F 801FEx S231i+ S231f+ S241i+ S241f+ S251i+ S251f+ S261f+ S271i+ S271f+ Class 1, conventional 2-wire intrinsically safe IR flame detector Class 1, conventional 2-wire flame proof IR flame detector Class 1, 4-20mA intrinsically safe IR flame detector Class 1, 4-20mA flame proof IR flame detector Class 1, analogue addressable intrinsically safe IR flame detector Class 1, analogue addressable flame proof IR flame detector Class 1, relay flame proof IR flame detector Class 1, analogue addressable intrinsically safe triple IR flame detector with MX interface Class 1, analogue addressable flame proof triple IR flame detector with MX interface Conventional Class 2 flame detector (4B, 4B-D and 5B bases) Conventional Class 2 intrinsically safe flame detector (MUBEx and 5BEx bases) MX addressable Class 2 flame detector (4B and 5B bases) MX addressable Class 2 intrinsically safe flame detector (MUBEx and 5BEx bases) Conventional class 1 2-wire intrinsically safe IR flame detector Conventional class 1 2-wire flame proof IR flame detector 4-20mA current class 1 intrinsically safe IR flame detector 4-20mA current class 1 flame proof IR flame detector Analogue addressable class 1 intrinsically safe IR flame detector Analogue addressable class 1 flame proof IR flame detector Relay class 1 flame proof IR flame detector Analogue class 1 triple IR flame detector with MX interface Analogue class 1 flame proof triple IR flame detector with MX interface LPCB Ref. No. 018e/01 018e/02 018e/03 018e/04 018e/05 018e/06 018e/07 018e/08 018e/09 681r/01 681r/02 681r/03 681r/04 763a/01 763a/02 763a/03 763a/04 763a/05 763a/06 763a/07 763a/08 763a/09
Bases: 4B 4 standard mounting base 4B-D 4 diode mounting base 5B standard mounting base MUBEx Intrinsically safe mounting base 5BEx Intrinsically safe mounting base MUB standard mounting base 5B standard mounting base 5BI addressable isolator base
Smoke Detectors
Certificated Products 801I 601I 601P 816P MX Digital addressable ionisation smoke detector (4B and 5B bases) Note: 1. Meets EN54 Part 7 in normal and high sensitivity settings only. Conventional ionisation smoke detector (4B, 4B-D and 5B bases) Conventional optical smoke detector (4B, 4B-D and 5B bases) MX Digital addressable photoelectric detector (4B and 5B bases) Note: 1. Meets EN54 Part 7 at normal and high sensitivity LPCB Ref. No. 681d/01 681d/02 681d/03 681d/05
Bases: 4B 4" universal mounting base 4B-D Diode mounting base 5B 5 Universal mounting base
258
12 Sep 2011
Multi-criteria Detectors
Bases: ZP7-SB1 standards base
12 Sep 2011
259
PRRPHDI2004
092p/01
T-17003
092p/01
ZP720-3
092p/01
Bases ZP7-SB1 Z6-BS1 E6-BS1 BD-21 FSBP2000 Z6-BS5 BD-22 Standard base Conventional surface base Conventional surface base Conventional surface base Conventional surface base Conventional diode base Conventional diode base
Certificate No: 092n-(cl-1) to EN 54-7: 2000 + A1: 2002 + A2: 2006 Certificated Products EA10E-2 Analogue addressable ionisation smoke detector (ZP7-SB1 base) (Labelled EST) Note: 1. Approved for use at Standard sensitivity setting only. Analogue addressable ionisation smoke detector (ZP7-SB1 base) (Labelled Plana Fabrega) Note: 1. Approved for use at Standard sensitivity setting only. Analogue addressable ionisation smoke detector (ZP7-SB1 base) (Labelled Photain Controls) Note: 1. Approved for use at Standard sensitivity setting only. Analogue addressable ionisation smoke detector (ZP7-SB1 base) (Labelled Ziton) Note: 1. Approved for use at Standard sensitivity setting only. Analogue addressable photoelectric smoke detector (ZP7-SB1 base) (Labelled EST) Note: 1. Approved for use at Standard sensitivity setting only. Analogue addressable photoelectric smoke detector LPCB Ref. No. 092n/01
I-17001
092n/01
ISDI2000
092n/01
ZP710-2
092n/01
EA30E-2
092n/02
O-17002
092n/02
260
12 Sep 2011
PPDI2000
092n/02
ZP730-2
092n/02
Bases ZP7-SB1 Z6-BS1 E6-BS1 BD-21 FSBP2000 Z6-BS5 BD-22 Standard base Conventional surface base Conventional surface base Conventional surface base Conventional surface base Conventional diode base Conventional diode base
Certificate No: 092k-(cl-1) to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003 Certificated Products EA32E-2 Analogue addressable combined photoelectric smoke and heat detector. (Labelled EST) (ASBE-2 base) Note: 1. Certificated at sensitivity profiles 1-4 for EN 54:7and sensitivity profiles 5 (A1) and 6(A2) for EN 54:5. Analogue addressable combined photoelectric smoke and heat detector. (Labelled EEC) (ZP7-SB1 base) Note: 1. Certificated at sensitivity profiles 1-4 for EN 54:7 and sensitivity profiles 5 (A1) and 6(A2) for EN 54:5. Analogue addressable combined photoelectric smoke and heat detector. (Labelled Plana Fabrega) (ZP7-SB1 base) Note: 1. Certificated at sensitivity profiles 1-4 for EN 54:7 and sensitivity profiles 5 (A1) and 6(A2) for EN 54:5. Analogue addressable combined photoelectric smoke and heat detector. (Labelled Photain Controls) (ZP7-SB1 base) Note: 1. Certificated at sensitivity profiles 1-4 for EN 54:7and sensitivity profiles 5 (A1) and 6(A2) for EN 54:5. Analogue addressable combined photoelectric smoke and heat detector. (Labelled Ziton) (ZP7-SB1 base) Note: 1. Certificated at sensitivity profiles 1-4 for EN 54:7and sensitivity profiles 5 (A1) and 6(A2) for EN 54:5. LPCB Ref. No. 092k/01
EAS707
092k/01
OT-17004
092k/01
PPDPHDI2000
092k/01
ZP732-2
092k/01
12 Sep 2011
261
Bases: P/N854001 4-Wire detector base Certificate No: 512a to EN 54-7: 2000 + A1: 2002 + A2: 2006
Certificate No: 512b to EN 54-5: 2000 + A1: 2002, EN 54-7: 2000 + A1: 2002 + A2: 2006 & CEA 4021: 2003
Multi-Criteria Detectors
Certificated Products 10-0002 Conventional 2 wire photoelectric smoke and heat detector with remote LED output (P/N854001 base) LPCB Ref. No. 512b/02
European Operations at: Xtralis (UK) Limited, Vision House, Focus 31, Mark Road, Hemel Hempstead, Hertfordshire HP2 7BW, United Kingdom Tel: +44 (0)1442 242330 Fax: +44 (0)1442 249327
Certificate No: 305e to EN 54-20: 2006 Certificate No: 305d to EN 54-20: 2006
262
12 Sep 2011
305d/02
305d/03
12 Sep 2011
263
305d/04
305d/05
264
12 Sep 2011
305d/06
305d/07
305d/08
12 Sep 2011
265
305d/09
305d/10
266
12 Sep 2011
XCC-010
305e/01
Notes: 1.
2. 3. 4.
5.
For compliance with clause 5.10 of EN 54-20 the detector shall be supplied with power from a power supply conforming with the requirements of EN 54-4. System design, installation and commissioning shall be performed In accordance with the Xtralis Class C product guide (Document 14159). The device is approved for sensitivity Class C. The detector is also approved when used with in-line filter models, E700-FILASSY and VSP-850 in accordance with the appropriate VESDA application guide (10856 or 17785). When installing pipework systems containing in-line components, guidance from the 18336 "Xtralis Open-flow In-Line Components" document shall be sought and the recommendations followed.
Bases: 80-050 FE CB Common mounting base 80-052 FE DB Diode mounting base 80-054 FE RB Relay mounting base 80-080 FEA RB Addressable relay mounting base 80-090 FE IB Negative switching isolating base Certificate No: 010u to EN 54-5: 2000 + A1: 2002
12 Sep 2011
267
Bases: 80-050 FE CB Common mounting base 80-052 FE DB Diode mounting base 80-054 FE RB Relay mounting base 80-080 FEA RB Addressable relay mounting base 80-090 FE IB Negative switching isolating base
268
12 Sep 2011
Notes: 1) The functionality of the RF link is excluded from the scope of the certification. WS8913 Type B battery operated carbon monoxide alarm with Integral 868.35MHz RF transmitter. 1018a/02
12 Sep 2011
269
Smoke Alarms
Certificated Products SD-176H SD-196H SD-170H SD-1982 SD-1782 Battery operated ionisation smoke alarm with alarm silence feature Battery operated photoelectric smoke alarm with alarm silence feature Battery operated ionization smoke alarm 9v battery operated photoelectric smoke alarm with alarm silence feature 9v battery operated ionisation smoke alarm with alarm silence feature LPCB Ref. No. 679a/01 679a/02 679a/03 679a/04 679a/05
Smoke Alarm
Certificated Products SD-176H SD-170H SD-1982 SD-1782 SD-196H Battery operated ionisation smoke alarm with alarm silence feature Battery operated ionisation smoke alarm 9V Battery operated photoelectric smoke alarm with alarm silence feature 9V Battery operated ionisation smoke alarm with alarm silence feature Battery operated photoelectric smoke alarm with alarm silence feature LPCB Ref. No. 679b/01 679b/02 679b/03 679b/04 679b/05
Smoke Alarms
Certificated Products SI 601 SI 610 WSI 601 SO 601 SO 610 Battery operated ionisation smoke alarm Sealed Battery operated ionisation smoke alarm Battery operated ionisation smoke alarm with RF transmitter module Note: The RF transmitter module is not covered within the scope of this approval Battery operated optical smoke alarm Sealed Battery operated optical smoke alarm LPCB Ref. No. 651d/01 651d/02 651d/03 651d/04 651d/05
270
12 Sep 2011
Smoke Alarms
Certificated Products FireHawk FHB10 FireHawk FHB10i 10 year batteryphotoelectric smoke alarm 10 year batteryphotoelectric smoke alarm with interlink LPCB Ref. No. 971a/01 971a/02
Smoke Alarms
Certificated Products 2330 02 2334 02 Battery operated photoelectric smoke alarm (replaceable battery) Note: 1. The radio link functionality is not included within the scope of approval Mains operated photoelectric smoke alarm Note: 1. The radio link functionality is not included within the scope of approval LPCB Ref. No. 1025a/01 1025a/02
Kidde Finland Oy
Tiilenpolttajankuja 6, 01720 Vantaa, Finland Tel: +358 9 615 87 235 Fax: +358 9 615 87 285 E-mail: antti.soininen@kidde.fi Website: www.kidde.fi
Certificate No: 904a-(cl-2) to EN 14604:2005
Smoke Alarm
Certificated Products 0914N 0915N 0916N 0918N Replaceable 9V Battery operated ionization smoke alarm Replaceable 9V Battery operated ionization smoke alarm Replaceable 9V Battery operated ionization smoke alarm with alarm silence feature Replaceable 9V Battery operated ionization smoke alarm with alarm silence feature LPCB Ref. No. 904a/02 904a/03 904a/04 904a/05
12 Sep 2011
271
Domestic Alarms
Certificated Products 0910UK 0914UK 0914UK (Fire Sentry) 0915UK 0916UK 0918UK i9040EU i9060EU i9080EU 9V Battery operated ionization smoke alarm Replaceable 9V Battery operated ionization smoke alarm Replaceable 9V Battery operated ionization smoke alarm Replaceable 9V Battery operated ionization smoke alarm Replaceable 9V Battery operation ionization smoke alarm with alarm silence feature Replaceable 9V Battery operated ionization smoke alarm with emergency light and alarm silence feature Replaceable 9V Battery operated ionization smoke alarm with alarm silence feature Replaceable 9V Battery operated ionization smoke alarm with alarm silence feature Replaceable 9V Battery operated ionization smoke alarm with emergency light and alarm silence feature LPCB Ref. No. 904a/01 904a/02 904a/02 904a/03 904a/04 904a/05 904a/06 904a/07 904a/08
Visonic
24 Habarzel Street, Tel Aviv 69710, Israel Tel: +44 (0)870 7300810 Fax: +44 (0)870 7300801 E-mail: DalitS@visonic.com Website: www.visonic.com
Certificate No: 512e to EN 50291: 2001
272
12 Sep 2011
Weckx Handelsonderneming
Stalbergweg 55, 5913 BJ Venlo, Netherlands Tel: +31 (0)77 3512776 Fax: +31 (0)77 3547959 E-mail: info@weckx.nl Website: http://www.weckx.nl
Certificate No: 971a-(cl-3) to EN 14604: 2005 Certificated Products W-Save WS10 W-Save WS10i 10 year battery operated photoelectric smoke alarm 10 year battery operated photoelectric smoke alarm with interlink LPCB Ref. No. 971a/01 971a/02
12 Sep 2011
273
PART 1: SECTION 5
MANUAL CALL POINTS The purpose of a manual call point is to enable a person discovering a fire to initiate the operation of a fire alarm system so that appropriate measures can be taken. Therefore it is important for the manual call point to be recognizable and simple to use. For this reason, the European standard has attempted to standardised their appearance and function. There are basically two types of manual call points which are related to the method of operation. - Type A: direct operation (single action). - Type B: indirect operation (double action). Both types require the breaking or the visible displacement by change of position of a frangible element forming part of the front face. Guidance on the selection, siting and speed of response should be sought from the applicable installation rule or code of practice (e.g. BS 5839-1). For example BS 5839-1 recommends only type A with a speed of evacuation signal within 3 seconds. Other codes of practice, may require a type B installation. This section lists manual call points approved for use in fire detection and fire alarm systems in buildings. The initial approval and continued approval processes for manual call points are outlined in scheme document SD041. Products listed in this section have been approved to: EN 54-11: 2001 Manual call points EN 54-11: 2001 + A1: 2005 Manual call points ISO 7240-11: 2005 Manual call points Audit: Regular product auditing and regular factory inspections are carried out by LPCB ensuring high manufacturing standards and continued compliance with the applicable product standard. Notes: 1. EN 54-11: 2001 supersedes BS 5839-2: 1983 which was withdrawn in November 2003. EN 54-11: 2001 is now a harmonised standard for the Construction Products Directive and CE marking is required for most of the European market from 1 September 2008. 2. Since the LPCB uses national and international standards for the listing of products, in some instances the requirements of these standards may conflict with the recommendations of local codes of practice. We recommend that specifiers seek advice from the relevant local authorities and amend their specifications accordingly.
274
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS
12 Sep 2011
275
PART 1: SECTION 5
MANUAL CALL POINTS
Sales Enquiries Spain, Apollo Espana Tel: +34 627 988 061 Fax: +34 949 335 289 E-mail: apollo.espana@apollo-fire.com
Sales Enquiries, China Apollo Fire Detectors Limited, Shanghai representative office Tel: +86 21 5237 0922 Fax: +86 21 5237 0920 E-mail: tony.ye@apollo-fire.com
Certificate No: 010d to BS 5839: Part 2:1983 Certificate No: 010n to EN 54-11: 2001 Certificate No: 010w to EN 54-11: 2001 and EN 54-17: 2005 Certificated Products 55000-900 XP95 55000-940 XP95 IS 55000-950 XP95 58000-900 Discovery 58000-910 Discovery 58000-920 Discovery 59000-910 XPlorer 55100-905 XP95 58100-910 Discovery 55100-908 XP95 58100-908 Discovery 58100-905 Discovery 58100-950 Discovery 55100-940 XP95IS 58100-951 Discovery Analogue addressable flush and surface mounted manual call point Certificated with Apollo, Series 90 and XP95 communication protocols Analogue addressable intrinsically safe manual call point Certificated with Apollo, Series 90 and XP95 communication protocols Analogue addressable waterproof manual call point Certificated with Apollo, Series 90 and XP95 communication protocols Analogue addressable flush and surface mounted manual call point Certificated with Series 90, XP95 and Discovery digital communication protocols Analogue addressable flush mounted manual call point Certificated with Series 90, XP95 and Discovery digital communication protocols Analogue addressable surface mounted manual call point Certificated with Series 90, XP95 and Discovery digital communication protocols Analogue addressable surface mounted manual call point Certificated with Series 90 and XP95 digital communication protocols Certificated with the Burgess V3NCSET7 Mk 1 microswitch Analogue addressable manual call point with surface mounting box Analogue addressable manual call point with surface mounting box Analogue addressable manual call point with short circuit isolator and surface mounting box Analogue addressable manual call point with short circuit isolator and surface mounting box Analogue addressable manual call point with short circuit isolator, glass frangible element and surface mounting box Analogue addressable waterproof manual call point Analogue addressable intrinsically safe manual call point. Analogue addressable waterproof manual call point with short circuit isolator LPCB Ref. No. 010d/06 010d/03 010d/04 010d/05 010d/05 010d/05 010n/01 010n/02 010n/06 010w/01 010w/03 010w/05 010n/08 010n/09 010w/06
276
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS
Argus-Spectrum Co
65 Serdobolskaya St, St. Petersburg 197342, Russian Federation Tel: +7 812 7037500 Fax: +7 812 7037501 E-mail: mail@argus-spectr.ru Website: www.argus-spectr.ru
Certificate No: 928h-(cl-2) to EN 54-11: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005 Certificated Products VCP100 Analogue addressable Type A indoor re-settable manual call point with short circuit isolator (SR01 and Flush mounting plate) LPCB Ref. No. 928h/01
12 Sep 2011
277
PART 1: SECTION 5
MANUAL CALL POINTS
Accessories: SR SR1T SR2T SR3T SR4T MR ETT L BZR/1 BZR/2 BZR/3 M141 PTR C
Surface mounting plastic box Surface mounting plastic box c/w 1 terminal Surface mounting plastic box c/w 2 terminals Surface mounting plastic box c/w 3 terminals Surface mounting plastic box c/w 4 terminals Surface mounting metal box European Terminal Tray ETT1, 2 & 3 Earth Continuity Link Bezel Type 1 Bezel Type 2 Bezel Type 3 Spacer Piece Pattress PTR, PTRE, PTR2T, PTR2TE, PTR3T & PTR3TE Hinged Cover(1)
Note: The hinged cover is optionally indicated by the presence of C at the end of the model number.
278
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS
* Approved with V4NCSET7 Mk1 or V4NSET7-UL micro switches only. Accessories: /BB surface mounted (plastic back box)
12 Sep 2011
279
PART 1: SECTION 5
MANUAL CALL POINTS
EMCO
125 El Alamean Street, El Mohandessin, Cairo, Egypt Tel: 00202 33 44 3 245 Fax: 00202 330 36 86 0 E-mail: emco@4emco.com Website: www.4emco.com
Certificate No: 928h to EN 54-11: 2001 + A1: 2002 and EN 54-17: 2005 Certificated Products ACP200 Analogue addressable Type A indoor re-settable manual call point with short circuit isolator (SR01 and Flush mounting plate) LPCB Ref. No. 928h/01
280
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS Manual Call Points
Certificated Products EM921 EM921-F EM921-TC EM921-FTC Accessories: EM921B1 EM921B2 EM921B3 Conventional manual call point with LED Conventional manual call point with flashy LED Convetnional manual call point with LED and transparent cover Conventional manual call point with flashy LED and transparent cover LPCB Ref. No. 512f/01 512f/02 512f/03 512f/04
Regular mounting base, 28mm High mounting base, 40mm High mounting base, 55m
Accessories: Fireguard FG921B1 Regular mounting base, 28mm Fireguard FG921B2 High mounting base, 40mm Fireguard FG921B3 High mounting base, 55m Ancillaries: SR01 Surface mounting box Flush mounting plate
12 Sep 2011
281
PART 1: SECTION 5
MANUAL CALL POINTS
Certificated Products FX9201 FX9201I Conventional manual call point Intelligent manual call point LPCB Ref. No. 548g/01 548g/02
Gent By Honeywell
140 Waterside Road, Hamilton Industrial Park, Leicester LE5 1TN, United Kingdom Tel: +44 (0)116 246 2000 Fax: +44 (0)116 246 2300 E-mail: gent_enquiry@gent.co.uk Website: www.gent.co.uk Middle East Sales Enquiries: E-mail: gent.export@honeywell.com
Certificate No: 042aq to EN 54-11: 2001 + A1: 2005 Certificated Products S4-34800 Analogue addressable Type A indoor manual call point (S4-34895 surface mount back box) Notes: 1) Approved for use with glass non re-settable element Analogue addressable Type A indoor manual call point with protective cover (S4-34895 surface mount back box) Notes: 1) Approved for use with glass non re-settable element Analogue addressable Type A indoor manual call point (S4-34895 surface mount back box) Notes: 1) Approved for use with plastic re-settable element Analogue addressable Type A indoor manual call point with protective cover (S4-34895 surface mount back box) Notes: Approved for use with plastic re-settable element LPCB Ref. No. 042aq/01
S4-34842
042aq/02
S4-34805
042aq/05
S4-34845
042aq/06
282
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS
Gulf Security Technology Co. Ltd (Manufacturing Division of Global System Technology PLC)
No. 80 Changjiang East Road, Economic & Technological Development Zone, Qinhuangdao, Hebei Province 066004, China Tel: +86 0335 8502528 Fax: +86 0335 8508942 E-mail: gst@gst.com.cn Website: www.gst.com.cn
Certificate No: 548g to EN 54-11: 2001 + A1: 2005 Certificated Products J-SAF-GST9211 (E) J-SAM-GST9111 (E) DC-9204 DI-9204 Conventional manual call point Intelligent manual call point Conventional re-settable indoor manual call point, surface and flush mounting (C-92FC) Digital addressable re-settable indoor manual call point, surface and flush mounting (C92FC) LPCB Ref. No. 548g/01 548g/02 548g/03 548g/04
HDR
Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United Kingdom Tel: +44 (0)1634 260133 Fax: +44 (0)1634 260132 E-mail: info@hochikieurope.com Website: www.hochikieurope.com
Certificate No: 164j to EN 54-11:2001 Certificate No: 164r to EN 54-17: 2005, EN 54-11: 2001 + A1: 200 Certificated Products 1440270 1440300 1440380 1440360 Intelligent Analogue Addressable Manual Call Point (SR and SR1T mounting boxes) Weather Proof Intelligent Analogue Addressable Manual Call Point (SR and SR1T mounting boxes) Intelligent analogue addressable manual call point with short circuit isolator (SR mounting box) Weather Proof Intelligent analogue addressable manual call point with short circuit isolator LPCB Ref. No. 164j/01 164j/04 164r/01 164r/02
Ancillaries: SR Surface mounting plastic box - indoor models only SR1T Surface mounting plastic box c/w 1 terminal
12 Sep 2011
283
PART 1: SECTION 5
MANUAL CALL POINTS
Accessories: SR Surface mounting plastic box - indoor models only SR1T Surface mounting plastic box c/w 1 terminal
284
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS
MCP7A-RC01xx-yyyy-zz
166b/49
12 Sep 2011
285
PART 1: SECTION 5
MANUAL CALL POINTS
Certificated Products MCP7B-RC01xx-yyyy-zz WCP1A-RxxxSx-yyyy-zz WCP1B-RxxxSx-yyyy-zz WCP2A-RxxxSx-yyyy-zz WCP2B-RxxxSx-yyyy-zz WCP3A-RxxxSx-yyyy-zz WCP4A-R000Sx-yyyy-zz WCP5A-RPwwSx-yyyy-zz WCP5A-RPwwSx-yyyy-zz Indoor surface/flush mounting conventional call point Outdoor surface mounting conventional waterproof call point Outdoor surface mounting conventional waterproof call point Outdoor surface mounting conventional waterproof call point Outdoor surface mounting conventional waterproof call point Outdoor surface mounting conventional waterproof call point Outdoor surface mounting conventional waterproof call point Outdoor surface mounting addressable waterproof call point Advanced Protocol (and System Sensor 500 series protocol) Outdoor surface mounting addressable waterproof call point Advanced Protocol (and Honeywell 500 series protocol) Notes: 1. ww (Range 0-99 odd numbers only) indicates the communication software protocol 2. S G (Glass element) S F (Flexible element) 3. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates a customer account code. Only specific account codes are LPCB approved and indicated by the presence of the LPCB logo placed on the product label 4. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639 5. IS indicates the intrinsically safe version. Outdoor surface mounting conventional waterproof call point Outdoor surface mounting conventional waterproof call point IIndoor surface/flush mounting conventional call point Indoor surface/flush mounting conventional call point Indoor surface/flush mounting conventional call point Indoor surface/flush mounting conventional call point Notes: 1. XXX xx indicates the series resistor value 039 xx (lowest 39 4K7 xx (highest 4.7 k 2. xxx X x indicates mounting ( S =Surface mounted, F =Flush mounted, P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals 3. xxxx G (Glass element) xxxx F (Flexible element) 4. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates a customer account code. Only specific account codes are LPCB approved and indicated by the presence of the LPCB logo placed on the product label 5. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639 6. IS indicates the intrinsically safe version. Indoor surface/flush mounting conventional call point Notes: 1. XXX xx indicates the electrical configuration ( 000 xx = no resistor, C01 xx = single pole changeover connections) 2. xxx X x indicates mounting ( S =Surface mounted, F =Flush mounted, P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals 3. xxxx G (Glass element) xxxx F (Flexible element) 4. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates a customer account code. Only specific account codes are LPCB approved and indicated by the presence of the LPCB logo placed on the product label 5. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639 6. IS indicates the intrinsically safe version. Indoor surface/flush mounting conventional call point Notes: 1. X x indicates mounting ( S =Surface mounted, F =Flush mounted, P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals) 2. x G (Glass element) x F (Flexible element) 3. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates a customer account code. Only specific account codes are LPCB approved and indicated by the presence of the LPCB logo placed on the product label 4. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639 5. IS indicates the intrinsically safe version. Indoor surface/flush mounting conventional call point Indoor surface/flush mounting conventional call point Notes: LPCB Ref. No. 166b/50 166b/51 166b/52 166b/53 166b/54 166b/55 166b/56 166b/57 166b/59
MCP3A-Rxxxxx-yyyy-zzIS
166b/43
MCP4A-R000xx-yyyy-zzIS
166b/44
MCP7A-RC01xx-yyyy-zzIS MCP7B-RC01xx-yyyy-zzIS
166b/49 166b/50
286
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS
Certificated Products 1. X x indicates mounting ( S =Surface mounted, F =Flush mounted, P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals) 2. x G (Glass element) x F (Flexible element) 3. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates a customer account code. Only specific account codes are LPCB approved and indicated by the presence of the LPCB logo placed on the product label 4. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639 5. IS indicates the intrinsically safe version. MCP5A-RP07xx-zz Indoor surface/flush mounting addressable call point (Labor Strauss protocol) Advanced Protocol (and Labor Strauss protocol) Notes: 1. X x indicates mounting ( S =Surface mounted, F =Flush mounted, P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals) 2. x G (Glass element) x F (Flexible element) 3. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639. Outdoor surface mounting addressable call point Advanced Protocol (and Labor Strauss protocol) Notes: 2. zz (Range 0-99) indicates 1. S G (Glass element) S F (Flexible element) customer marking options detailed on KAC controlled drawing 08/2639. Outdoor surface mounting conventional waterproof call point Outdoor surface mounting conventional waterproof call point Outdoor surface mounting conventional waterproof call poin Outdoor surface mounting conventional waterproof call point Notes: 1. XXX xx indicates the series resistor value 039 xx (lowest 39 4K7 xx (highest 4.7 k 2. xxxS G (Glass element) xxxS F (Flexible element) 3. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates a customer account code. Only specific account codes are LPCB approved and indicated by the presence of the LPCB logo placed on the product label 4. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639 5. IS indicates the intrinsically safe version. Outdoor surface mounting conventional waterproof call point Notes: 1. XXX Sx indicates the electrical configuration ( 000 Sx = no resistor, C01 Sx = single pole changeover connections) 2. xxxS G (Glass element) xxxS F (Flexible element) 3. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates a customer account code. Only specific account codes are LPCB approved and indicated by the presence of the LPCB logo placed on the product label 4. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639 5. IS indicates the intrinsically safe version. Outdoor surface mounting conventional waterproof call point Notes: 1. S G (Glass element) S F (Flexible element) 2. yyyy (Range A000 to Z999 or STCK for standard stocked product),indicates a customer account code. Only specific account codes are LPCB approved and indicated by the presence of the LPCB logo placed on the product label 3. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639 4. IS indicates the intrinsically safe version. Outdoor surface mounting conventional waterproof call point Outdoor surface mounting conventional waterproof call point Notes: 1. S G (Glass element) S F (Flexible element) 2. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates a customer account code. Only specific account codes are LPCB approved and indicated by the presence of the LPCB logo placed on the product label 3. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639 166b/67 LPCB Ref. No.
WCP5A-RP07Sx-zz
166b/68
WCP3A-RxxxSx-yyyy-zzIS
166b/55
WCP4A-R000Sx-yyyy-zzIS
166b/56
WCP7A-RC01Sx-yyyy-zzIS WCP7B-RC01Sx-yyyy-zzIS
166b/61 166b/62
12 Sep 2011
287
PART 1: SECTION 5
MANUAL CALL POINTS
Certificated Products 4. IS indicates the intrinsically safe version. MCP5A-RP01yz-K01301IS MCP5A-RP03yz-K01301IS Indoor surface/flush mounting addressable call point Sensor 500 series protocol) for use in intrinsically safe systems Indoor surface/flush mounting addressable call point 500 series protocol) for use in intrinsically safe systems Notes: 1. S z (Surface mounted) F z (Flush mounted) 2. y G (Glass element) y F (Flexible element) 166b/65 166b/66 LPCB Ref. No.
Surface mounting plastic box(1) Surface mounting plastic box c/w 1 terminal(1) Surface mounting plastic box c/w 2 terminals(1) Surface mounting plastic box c/w 3 terminals(1) Surface mounting plastic box c/w 4 terminals(1) European Terminal Tray ETT1, 2 & 3(1) Earth Continuity Link(1) Spacer Piece(1) Pattress PTR, PTRE, PTR2T, PTR2TE, PTR3T & PTR3TE(1) Hinged Cover(2) Notes: 1. The above accessories are only supplied with MCP 1-7 Series manual call points 2. The hinged cover is only supplied with the MCP & WCP Series manual call points optionally indicated by the presence of C at the end of the model number.
Certificate No: 166e to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005 Certificated Products MCP5A-RPwwxx-yyyy-zz MCP5A-RPwwxx-yyyy-zz Indoor/Outdoor surface/flush mounting addressable call point with short circuit isolator Advanced Protocol (and System Sensor 500 series protocol) Indoor/Outdoor surface/flush mounting addressable call point with short circuit isolator Advanced Protocol (and Honeywell 500 series protocol) Notes: 1. ww (Range 0-99 even numbers only) indicates the communication software protocol 2. ww X x indicates mounting ( S =Surface mounted, F =Flush mounted, P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals) 3. x G (Glass element) x F (Flexible element) 4. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates a customer account code. Only specific account codes are LPCB approved and indicated by the presence of the LPCB logo placed on the product label 5. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639. Outdoor surface mounting addressable waterproof call point with short circuit isolator Advanced Protocol (and System Sensor 500 series protocol) Outdoor surface mounting addressable waterproof call point with short circuit isolator Advanced Protocol (and Honeywell 500 series protocol) Notes: 1. ww (Range 0-99 even numbers only) indicates the communication software protocol 2. S G (Glass element) S F (Flexible element) 3. yyyy (Range A000 to Z999 or STCK for standard stocked product), indicates a customer account code. Only specific account codes are LPCB approved and indicated by the presence of the LPCB logo placed on the product label 4. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639. Indoor surface/flush mounting addressable call point with short circuit isolator Advanced Protocol (and Labor Strauss protocol) Notes: 1. X x indicates mounting ( S =Surface mounted, F =Flush mounted, P =Pattress mounted, 1-4 = Surface mounted with 1-4 terminals) LPCB Ref. No. 166e/01 166e/02
WCP5A-RPwwSx-yyyy-zz WCP5A-RPwwSx-yyyy-zz
166e/03 166e/04
MCP5A-RP08xx-zz
166e/07
288
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS
Certificated Products 2. x G (Glass element) x F (Flexible element) 3. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639. Outdoor surface mounting addressable call point with short circuit isolator Advanced Protocol (and Labor Strauss protocol) Notes: 1. S G (Glass element) S F (Flexible element) 2. zz (Range 0-99) indicates customer marking options detailed on KAC controlled drawing 08/2639. LPCB Ref. No.
WCP5A-RP08Sx-zz
166e/08
Accessories: SR Surface mounting plastic box(1) SR1T Surface mounting plastic box c/w 1 terminal(1) SR2T Surface mounting plastic box c/w 2 terminal(1) SR3T Surface mounting plastic box c/w 3 terminal(1) SR4T Surface mounting plastic box c/w 4 terminal(1) ETT European Terminal Tray ETT 1, 2 & 3(1) L Earth Continuity Link(1) M141W Spacer Piece(1) PTR Pattress PTR, PTRE, PTR2T, PTR2TE, PTR3T & PTR3TE(1) C Hinged Cover(2) Notes: 1. The above accessories are only supplied with MCP Series manual call points 2. The hinged cover is supplied with the MCP & WCP Series manual call points optionally indicated by the present of C at the end of the model number.
12 Sep 2011
289
PART 1: SECTION 5
MANUAL CALL POINTS
MI-MCP-xxxxx
166b/47
MI-WCP-R/Sx
166b/59
MI-WCP-R/I/Sx
166e/04
290
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS
Certificated Products call point, surface and flush mounting (C-92FC) Accessories C-92FC Transparent cover LPCB Ref. No.
Notifier by Honeywell
Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United Kingdom Tel: +44 (0)1444 230230 Fax: +44 (0)1444 230689 E-mail: sales@notifierfiresystems.co.uk Website: www.notifierfiresystems.co.uk
Certificate No: 166e to EN 54-11: 2001 + A1: 2005, EN 54-17: 2005 Certificate No: 166b to EN 54-11: 2001 + A1: 2005 Certificated Products M700KACI-xx Indoor surface/flush mounting addressable call point with short circuit isolator Advanced Protocol (and System Sensor 500 series protocol) Notes: 1. xx = S x (Surface mounted) F x (Flush mounted) 2. xx = x G (Glass element) x F (Flexible element) 3. The above manual call point is approved with three micro-switches (Honeywell ZM10E50A01, Otehall 294/20/150/G and Burgess X4G31051BBAQ) Outdoor surface mounting addressable waterproof call point with short circuit isolator Advanced Protocol (and System Sensor 500 series protocol) Note: 1. S x = S G (Glass Element) S F (Flexible Element) Indoor surface/flush mounting addressable call point Advanced Protocol (and System Sensor 500 series protocol) Notes: 1. xx = S x (Surface mounted) F x (Flush mounted) 2. xx = x G (Glass element) x F (Flexible element) LPCB Ref. No. 166e/01
M700WCP-R/I/Sx
166e/03
M700KAC-xx
166b/45
Accessories: SR SR1T SR2T SR3T SR4T ETT L BZR/1 BZR/2 BZR/3 M141W PTR
Surface mounting plastic box(1) Surface mounting plastic box c/w 1 terminal(1) Surface mounting plastic box c/w 2 terminal(1) Surface mounting plastic box c/w 3 terminal(1) Surface mounting plastic box c/w 4 terminal(1) European Terminal Tray ETT 1, 2 & 3(1) Earth Continuity Link(1) Bazel Type 1(1) Bazel Type 2(1) Bazel Type 3(1) Spacer Piece(1) Pattress PTR, PTRE, PTR2T, PTR2TE, PTR3T & PTR3TE(1)
12 Sep 2011
291
PART 1: SECTION 5
MANUAL CALL POINTS
C Hinged Cover(2) Notes: 1. The above accessories are only supplied with M700KAC-xx & M700KACI-xx manual call points 2. The hinged cover may be supplied with all models and is optionally indicated by the precence of 'C' at the end of the model number.
OG Elektronik
Sanayi Mah., 636 Sok., Erol Apt. 11/3, Antalya, Turkey Tel: +9 0242 344 2500 Fax: +9 0242 344 2120 E-mail: info@og.com.tr; ahmet@og.com.tr Website: www.og.com.tr
Certificate No: 928h-(cl-1) to EN 54-11: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005 Certificated Products FF VB200 Analogue addressable Type A indoor re-settable manual call point with short circuit isolator (SR01 and Flush mounting plate) LPCB Ref. No. 928h/01
Pelco Finland Oy
Kalkkipellontie 6, PO Box 415, Fl-02601 Espoo, Finland Tel: +358 10 446 511 Fax: +358 10 446 5103 Website: www.pelco.com/nordic
Certificate No: 010n-(cl-1) to EN 54-11: 2001 + A1: 2005 Certificated Products EPP-23E EPP-23P ESMI Intellia analogue addressable waterproof manual call point PELCO Intellia analogue addressable waterproof manual call point LPCB Ref. No. 010n/08 010n/08
292
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS
Accessories M200 wall plate M125 back box M223 back box
Sareme UAB
Naugarduko str. 32/2, Vilnius LT2006, Lithuania Tel: +3705 2135047 Fax: +3705 2333567 E-mail: valdemar@sareme.lt
Certificate No: 512f to EN 54-11:2001 + A1:2005 Certificated Products SF MCP127 SF MCP127-F SF MCP127-TC SF MCP127-FTC Conventional manual call point with LED Conventional manual call point with flashy LED Conventional manual call point with LED and transparent cover Conventional manual call point with flashy LED and transparent cover LPCB Ref. No. 512f/01 512f/02 512f/03 512f/04
Accessories SF MCP127-B1 Regular mounting base, 28mm SF MCP127-B2 High mounting base, 40mm SF MCP127-B3 High mounting base, 55m
12 Sep 2011
293
PART 1: SECTION 5
MANUAL CALL POINTS
FDM1101-RG FDM1101-RP FDM1101A-RG FDM1101A-RP FDM1101-RG(F) FDM1101-RP(F) DM1131 DM1151 DM1134 DM1154 DM1134H DM1154H
126as/01 126as/02 126as/03 126as/04 126as/05 126as/06 126ax/01 126ax/02 126ax/03 126ax/04 126ax/05 126ax/06
Accessories: FDMC291 protective cover FDMK291 key with cover DMZ1197-AC protective cover DMZ1195 key
294
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS
DMZ1197-AD seal for wet areas Bases: FDMH295-R Housing base FDMH295-S Housing base with holes and sockets
SMS
Hamilton Industrial Park, 140 Waterside Road, Leicester LE5 1TN, United Kingdom Tel: +44 (0)116 246 2000 Fax: +44 (0)116 246 2300 E-mail: Nikki.Morgan@honeywell.com Website: www.gent.co.uk
Certificate No: 042aq to EN54-11: 2001+ A1:2005 Certificated Products SEN-800 Analogue addressable Type A indoor manual call point (SEN-895 surface mount back box) Note: Approved for use with glass non re-settable element Analogue addressable Type A indoor manual call point (SEN-895 surface mount back box) Note: Approved for use with plastic re-settable element LPCB Ref. No. 042aq/01
SEN-805
042aq/05
12 Sep 2011
295
PART 1: SECTION 5
MANUAL CALL POINTS
Teledata S.r.l.
Via Giulietti 8, Milan 20132, Italy Tel: +39 02-27201352 Fax: +39 02-2593704 E-mail: info@teledata-i.com Website: www.teledate-i.com
Certificate No: 928h-(cl-7) to EN 54-11: 2001 + A1: 2005 and EN 54-17: 2005 Certificated Products FDVCP100 Analogue addressable Type A resettable indoor manual call point with short circuit isolator (SR01 and Flush mounting plate) LPCB Ref. No. 928h/01
BGUI2000LED
092r/01
296
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS
Certificated Products DM790 Flush mount cradle with connectors DM795 Flush mount cradle with connectors and forkgrips DMN782 Hinged transparent MCP protection cover DMN715 EN 54 universal MCP glass DMN784 Call point test key DMN800 Resettable element Analogue addressable manual call point, Labelled EST Accessories: DMN787 Surface mounting box with earth terminal, red DM790 Flush mount cradle with connectors DM795 Flush mount cradle with connectors and forkgrips DMN782 Hinged transparent MCP protection cover DMN715 EN 54 universal MCP glass DMN784 Call point test key DMN800 Resettable element Analogue addressable manual call point, Labelled Ziton Accessories: DMN787 Surface mounting box with earth terminal, red DM790 Flush mount cradle with connectors DM795 Flush mount cradle with connectors and forkgrips DMN782 Hinged transparent MCP protection cover DMN715 EN 54 universal MCP glass DMN784 Call point test key DMN800 Resettable element Analogue addressable manual call point, Labelled Clymac Accessories: DMN787 DM790 DM795 DMN782 DMN715 DMN784 DMN800 Surface mounting box with earth terminal, red Flush mount cradle with connectors Flush mount cradle with connectors and forkgrips Hinged transparent MCP protection cover EN 54 universal MCP glass Call point test key Resettable element LPCB Ref. No.
EA785-3
092r/01
ZP785-3S-SW
092r/01
CL785-3
092r/01
Certificate No: 262p to EN 54-11: 2001 Certificated Products SIGI-271 Accessories SR3T-P Surface mounted box ETT1-P Flush mounted box Digital addressable indoor manual call point, surface or flush mounted LPCB Ref. No. 262p/01
12 Sep 2011
297
PART 1: SECTION 5
MANUAL CALL POINTS
ZP787-3-SW
092r/02
EA787-3
092r/02
EA787-3-18
092r/02
ZP785-3
092r/01
BGUI2000LED
092r/01
EA785-3
092r/01
EA785-3-18
092r/01
298
12 Sep 2011
PART 1: SECTION 5
MANUAL CALL POINTS
Certificated Products LPCB Ref. No. DMN787 Surface mounting box with earth terminal, red DM790 Flush mount cradle with connectors DM795 Flush mount cradle with connectors and forkgrips DMN782 Hinged transparent MCP protection cover DMN715 EN 54 universal MCP glass DMN784 Call point test key DMN800 Resettable element Analogue addressable indoor manual call point, Labelled Ziton Accessories: DMN787 Surface mounting box with earth terminal, red DM790 Flush mount cradle with connectors DM795 Flush mount cradle with connectors and forkgrips DMN782 Hinged transparent MCP protection cover DMN715 EN 54 universal MCP glass DMN784 Call point test key DMN800 Resettable element Analogue addressable indoor manual call point, Labelled Clymac Accessories: DMN787 DM790 DM795 DMN782 DMN715 DMN784 DMN800 Surface mounting box with earth terminal, red Flush mount cradle with connectors Flush mount cradle with connectors and forkgrips Hinged transparent MCP protection cover EN 54 universal MCP glass Call point test key Resettable element
ZP785-3S-SW
092r/01
CL785-3
092r/01
12 Sep 2011
299
PART 1: SECTION 6
LINE UNITS A Line Unit is the term given to define devices used for functions other than fire detection, which are connected to a fire detection and alarm system transmission path or within other components of the fire detection and alarm system e.g. inside Control and Indicating Equipment. For example, the following devices may be regarded as Line Units: short circuit isolators input/output interfaces
Short-circuit isolators are used to limit the consequences of low parallel resistance faults between the lines of a transmission path of a fire detection and fire alarm system. The transmission path is normally in a loop configuration which is separated into sections by the short circuit isolators, such that a detected fault in a particular section will isolate that particular section allowing other components in other sections on the loop to function correctly. Input/output devices are intended for different applications, and may therefore have different functions. Their functions are specified by the manufacturer and they are tested and approved against this specification. This section lists approved Line Units which are connected to a fire detection and alarm system. The initial approval and continued approval processes for Line Units are outlined in scheme document SD038. Products listed in this section have been approved to: EN 54-17: 2005 Short-circuit isolators EN 54-18: 2005 Input/output devices Audit: Regular product auditing and regular factory inspections are carried out by LPCB ensuring high manufacturing standards and continued compliance with the applicable product standard. Notes: 1. It is recommended that short circuit isolators and input/output devices are certificated to EN 54-17: 2005 and EN 54-18: 2005 respectively. EN 54-17: 2005 and EN 54-18: 2005 are now harmonised standards for the Construction Products Directive and CE marking is required for most of the European market by 1 December 2008. It is therefore recommended that devices are certificated to EN 54-17: 2005 or EN 54-18: 2005 where applicable as soon as possible. 2. Since the LPCB uses national and international standards for the listing of products, in some instances the requirements of these standards may conflict with the recommendations of local codes of practice. We recommend that specifiers seek advice from the relevant local authorities and amend their specifications accordingly.
ADI International
ADI International, C/Mijancas 1, 28022 Madrid, Spain Tel: +34 91 102 5948 Fax: +34 902 550 776 E-mail: victor.gomez@adi-int.com Website: www.ademco.es
Certificate No: 199v to EN 54-17: 2005 and EN 54-18: 2005
Line Units
Certificated Products M910C Conventional zone monitor module LPCB Ref. No. 199v/07
300
12 Sep 2011
PART 1: SECTION 6
LINE UNITS
Sales Enquiries Spain, Apollo Espana Tel: +34 627 988 061 Fax: +34 949 335 289 E-mail: apollo.espana@apollo-fire.com
Sales Enquiries China, Apollo Fire Detectors Limited,, Shanghai representative office Tel: +86 21 5237 0922 Fax: +86 21 5237 0920 E-mail: tony.ye@apollo-fire.com
Certificate No: 010f to EFSG/F/95/007 Certificate No: 010k to CEA GEI 1-052:Draft 2: 1997 Certificate No: 010aa to EN 54-17:2005 Certificate No: 010ag to EN54-18: 2005 Certificate No: 010ah to EN54-17: 2005 & EN54-18: 2005 Certificated Products 45681-321 XP95 45681-323 XP95 55000-710 XP95 55000-720 XP95 55000-840 XP95 Negative short circuit isolating base Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Positive short circuit isolating base Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Positive short circuit isolator (45681-211 mounting base) Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Negative short circuit isolator (45681-211 mounting base) Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Analogue addressable switch monitor plus with isolator -flush mounted Approved with Apollo Series 90, XP95 and Discovery digital communication protocols LPCB Ref. No. 010k/04 010k/03 010k/01 010k/02 010k/05
12 Sep 2011
301
PART 1: SECTION 6
LINE UNITS
Certificated Products 55000-841 XP95 55000-842 XP95 55000-843 XP95 55000-844 XP95 55000-845 XP95 55000-846 XP95 55000-847 XP95 55000-848 XP95 55000-849 XP95 55000-851 XP95 55000-852 XP95 55000-855 XP95 55000-856 XP95 55000-588 XP95 55000-589 XP95 45681-284 55000-875 55000-588 55000-841 55000-843 55000-845 55000-847 55000-849 55000-852 45681-321 45681-323 55000-710 55000-720 55000-802 55000-812 55000-181 55000-182 55000-821 55000-822 55000-855 55000-856 55000-760 45681-517 45681-518 45681-242 45681-245 45681-246 45681-247 45681-248 45681-508 ORB-RB-10004 ORB-SW-10005 55000-797 55000-803 55000-804 Analogue addressable switch monitor plus with isolator -surface mounted Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Analogue addressable switch monitor with isolator -flush mounted Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Analogue addressable switch monitor with isolator -surface mounted Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Analogue addressable Zone monitor unit with isolator -flush mounted Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Analogue addressable zone monitor unit with isolator -surface mounted Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Analogue addressable input/output unit with isolator flush mounted Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Analogue addressable input/output unit with isolator -surface mounted Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Analogue addressable output unit with isolator flush mounted Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Analogue addressable output unit with isolator -surface mounted Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Analogue addressable sounder controller unit with isolator -flush mounted Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Analogue addressable sounder controller unit with isolator -surface mounted Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Single Channel Protocol Translator Dual Channel Protocol Translator Analogue addressable 3 Channel Input/Output unit with short circuit isolator Approved with Apollo Series 90, XP95 and Discovery digital communication protocols Analogue addressable 3 Channel Input/Output unit Approved with Apollo Series 90, XP95 and Discovery digital communication protocols XP95/Discovery short circuit isolating base XP95 analogue addressable mains switch input/output unit XP95 analogue addressable 3 channel input/output unit with isolator XP95 analogue addressable switch monitor plus with isolator XP95 analogue addressable switch monitor with isolator XP95 analogue addressable zone monitor unit with isolator XP95 analogue addressable input/output unit with isolator XP95 analogue addressable output unit with isolator XP95 analogue addressable sounder controller with isolator XP95 20D negative short circuit isolating base XP95 20D positive short circuit isolating base XP95 20D positive short circuit isolator XP95 20D negative short circuit isolator XP95 analogue addressable DIN-rail dual isolator XP95 analogue addressable DIN-rail zone monitor XP95 analogue addressable DIN-rail 8A sounder controller unit XP95 analogue addressable DIN-rail sounder control unit XP95 analogue addressable DIN-rail switch monitor plus XP95 analogue addressable DIN-rail switch monitor XP95 analogue addressable DIN-rail protocol translator - single Note: to ensure compliance is maintained, all connecting cables to the protocol translator shall be less than 3m. XP95 analogue addressable DIN-rail protocol translator - dual Note: to ensure compliance is maintained, all connecting cables to the protocol translator shall be less than 3m. XP95/Discovery Analogue addressable mini switch monitor with isolator Enhanced deep isolating base (White) Enhanced deep isolating base (Red) XP95 analogue addressable low power relay base S65 conventional standard relay base S65 conventional auxiliary relay base S65 conventional end of line 12V relay base S65 conventional end of line 24V relay base S65 conventional 12V relay base Orbis TimeSaver relay base Orbis Sav-wire base XP95 analogue addressable DIN-rail mains input/output unit Note: to ensure compliance is maintained, this device shall be installed within an enclosure weighing greater than 4.75kg. XP95 analogue addressable DIN-rail input/output unit Note: to ensure compliance is maintained, this device shall be installed within an enclosure weighing greater than 4.75kg. XP95 analogue addressable DIN-rail output unit Note: to ensure compliance is maintained, this device shall be installed within an LPCB Ref. No. 010k/05 010k/06 010k/06 010k/10 010k/10 010k/07 010k/07 010k/08 010k/08 010k/09 010k/09 010f/01 010f/02 010k/11 010k/12 010aa/01 010ag/16 010ah/01 010ah/03 010ah/04 010ah/05 010ah/06 010ah/07 010ah/08 010aa/02 010aa/03 010aa/04 010aa/05 010aa/06 010ah/02 010ag/07 010ag/08 010ag/12 010ag/13 010ag/14 010ag/15 010ah/09 010aa/07 010aa/08 010ag/01 010ag/02 010ag/03 010ag/04 010ag/05 010ag/06 010ag/17 010ag/18 010ag/09 010ag/10 010ag/11
302
12 Sep 2011
PART 1: SECTION 6
LINE UNITS
Certificated Products enclosure weighing greater than 4.75kg. Bases: 45681-211 XP95 isolator base LPCB Ref. No.
12 Sep 2011
303
PART 1: SECTION 6
LINE UNITS
Certificated Products output module Resonance conventional zone module B524IEFT-1 ISO524-1 Conventional zone interface module Resonance isolator base Resonance packaged isolator LPCB Ref. No. 199v/07 199x/01 199x/02
EQ3720ab(RM)
973b/02
EQ3710ab(AIM)
973b/03
EQ25EM(SAM)
973b/04
304
12 Sep 2011
PART 1: SECTION 6
LINE UNITS
Certificated Products the power transmission path. Refer to the manufacturers installation document 95-8642 with respect to the number of devices to be connected in a group or zone. Note 3: The EQ25EM(SAM) is approved for use in an EQ5410 cabinet. Initiating Device circuit with short circuit isolator Note 1: The isolation is applied on the LON communication transmission path and not the power transmission path. Refer to the manufacturers installation document 95-8642 with respect to the number of devices to be connected in a group or zone. Note 2: The EQ22EM(IDCSC) is approved for use in an EQ5410 cabinet. LPCB Ref. No.
EQ22EM(IDCSC)
973b/05
12 Sep 2011
305
PART 1: SECTION 6
LINE UNITS
GE Security Inc
8985 Town Center Parkway, Bradenton, Florida 34202, United States Tel: (941) 739-42228 E-mail: gesecurity.customerservice@ge.com
Certificate No: 262y-(cl-1) to EN 54-18: 2005 Certificate No: 262x-(cl-1) to EN 54-17: 2005 Certificated Products SIGA-CC1 Single Input Signal Module Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGAMP2L Note 2: approved with personality code 5 Auto-Sync Output Module Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGAMP2L Note 2: approved with personality code 5 Dual Input Signal Module Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGAMP2L Note 2: approved with personality code 7 Universal Class A/B Module Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGAMP2L Note 2: approved with personality codes 3, 4, 8, 11, 12, 15, 16 and 18 Control Relay Module Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2L Note 2: approved with personality code 8 Control Relay Module Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2L Note 2: approved with personality code 8 Polarity Reversal Relay Module Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2L Note 2: approved with personality code 8 Single Input Module Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2L Note 2: approved with personality codes 3, 4 and 18 Dual Input Module Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2L Note 2: approved with personality codes 3, 4 and 18 Monitor Module Note 1: approved with the following ancillaries - SIGA-MP1, SIGA-MP2 and SIGA-MP2L Note 2: approved with personality code 3 Isolator Module (SIGA-MP1, SIGA-MP2 and SIGA-MP2L) LPCB Ref. No. 262y/01
SIGA-CC1S
262y/02
SIGA-CC2
262y/03
SIGA-UM
262y/04
SIGA-CR SIGA-CR2 SIGA-CRR SIGA-CT1 SIGA-CT2 SIGA-MM1 SIGA-IM Ancillaries SIGA-MP1 Mounting Plate SIGA-MP2 Mounting Plate SIGA-MP2L Mounting Plate
306
12 Sep 2011
PART 1: SECTION 6
LINE UNITS
Certificated Products SIGA-IPHSI, SIGA-PHSI, SIGA-PSI, SIGA-ISI and SIGA-HRSI. SIGA-IB4 Analogue addressable short circuit isolator base (with 4 inch mounting adaptors) Note: 1) Certified for used with fire detector models SIGA-IPHSI, SIGA-PHSI, SIGA-PSI, SIGA-ISI and SIGA-HRSI. 902b/02 LPCB Ref. No.
Gent By Honeywell
140 Waterside Road, Hamilton Industrial Park, Leicester LE5 1TN, United Kingdom Tel: +44 (0)116 246 2000 Fax: +44 (0)116 246 2300 E-mail: gent_enquiry@gent.co.uk Website: www.gent.co.uk
Certificate No: 042ba to EN 54-17: 2005 & EN 54-18: 2005 Certificated Products S4-34410 S4-34411 S4-34415 S4-34420 S4-34450 Analogue addressable 1 input interface module with short circuit isolator, low voltage. (S4-34490 and S4-34492 boxes) Analogue addressable 1 output DIN rail mounting interface module with short circuit isolator, medium voltage. Analogue addressable 1 output surface mounting interface module with short circuit isolator, medium voltage. Analogue addressable 1 input and 1 output interface module with short circuit isolator, low voltage. (S4-34490 and S4-34492 boxes) Analogue addressable 4 input / output interface module with short circuit isolator, low voltage. (S4-34490 and S4-34492 boxes) LPCB Ref. No. 042ba/01 042ba/02 042ba/03 042ba/04 042ba/05
12 Sep 2011
307
PART 1: SECTION 6
LINE UNITS
Gulf Security Technology Co. Ltd (Manufacturing Division of Global System Technology PLC)
No. 80 Changjiang East Road, Economic & Technological Development Zone, Qinhuangdao, Hebei Province 066004, China Tel: +86 0335 8502528 Fax: +86 0335 8508942 E-mail: gst@gst.com.cn Website: www.gst.com.cn
Certificate No: 548n to EN 54-17: 2005 Certificate No: 548m to EN 54-18: 2005 Certificated Products GST-LD-8322 GST-LD-8300 GST-LD-8301 Loop isolator Analogue addressable input module Analogue addressable single input/output module LPCB Ref. No. 548n/01 548m/01 548m/02
HDR
Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United Kingdom Tel: +44 (0)1634 260133 Fax: +44 (0)1634 260132 E-mail: info@hochikieurope.com Website: www.hochikieurope.com
Certificate No: 164b to EFSG/F/95/007 Certificate No: 164q to EN 54-17: 2005, EN 54-18: 2005 Certificate No: 164n to EN 54-17: 2005 Certificate No: 164p to EN 54-18: 2005
Line Units
Certificated Products 1433100 1433620 1433560 1433540 1433600 1226110 1433380 1433640 Dual Zone Monitor Intelligent analogue addressable single zone monitor with short circuit isolator Intelligent analogue addressable dual input module with short circuit isolator Intelligent analogue addressable dual sounder controller with short circuit isolator Intelligent analogue addressable dual relay controller with short circuit isolator Short Circuit Isolating Base Intelligent Analogue addressable powered output module Intelligent Analogue addressable single input module LPCB Ref. No. 164b/05 164q/01 164q/03 164q/05 164q/07 164n/01 164p/10 164p/11
308
12 Sep 2011
PART 1: SECTION 6
LINE UNITS
Line Units
Certificated Products CHQ-Z CHQ-SZM/OEM(SCI) CHQ-SZM/DIN(SCI) CHQ-DIM/OEM(SCI) CHQ-DIM/DIN(SCI) CHQ-DSC/OEM(SCI) CHQ-DSC/DIN(SCI) CHQ-DRC/OEM(SCI) CHQ-DRC/DIN(SCI) CHQ-SZM/OEM(HFP)-SCI CHQ-DIM/OEM(HFP)-SCI CHQ-DSC/OEM(HFP)-SCI CHQ-DRC/OEM(HFP)-SCI YBO-R/SCI(HFP) YBO-R/SCI(RED) YBO-R/SCI(WHT) YBO-R/SCI YBO-R/6R YBO-R/6R(WHT) YBO-R/6RS YBO-R/6RS(WHT) YBO-R/6RN YBO-R/6RN(WHT) CHQ-POM CHQ-SIM CHQ-POM(HFP) CHQ-SIM(HFP) CHQ-SZM/M(SCI) CHQ-DIM/M(SCI) CHQ-DSC/M(SCI) CHQ-DRC/M(SCI) YBO-R/SCIM Dual zone monitor Intelligent Analogue Addressable Single Zone monitor with Short Circuit Isolator Intelligent Analogue Addressable Single Zone monitor with Short Circuit Isolator (DIN rail version) Intelligent Analogue Addressable Dual Input Module with Short Circuit Isolator Intelligent Analogue Addressable Dual Input Module with Short Circuit Isolator (DIN rail version) Intelligent Analogue Addressable Dual Sounder Controller with Short Circuit Isolator Intelligent Analogue Addressable Dual Sounder Controller with Short Circuit Isolator (DIN rail version) Intelligent Analogue Addressable Dual Relay Controller with Short Circuit Isolator Intelligent Analogue Addressable Dual Relay Controller with Short Circuit Isolator (DIN rail version) Intelligent analogue addressable single zone monitor with short circuit isolator Intelligent analogue addressable dual input module with short circuit isolator Intelligent analogue addressable dual sounder controller with short circuit isolator Intelligent analogue addressable dual relay controller with short circuit isolator Short Circuit Isolating Base Short Circuit Isolating Base (RED) Short Circuit Isolating Base (WHITE) Short Circuit Isolating Base Conventional latching relay base Conventional latching relay base - White Conventional latching relay base with integral Schottky diode Conventional latching relay base with integral Schottky diode - White Conventional non-latching relay base Conventional non-latching relay base - White Intelligent Analogue addressable powered output module Intelligent Analogue addressable single input module Intelligent Analogue addressable powered output module Intelligent Analogue addressable single input module Intelligent analogue addressable single zone monitor with short circuit isolator Intelligent analogue addressable dual input module with short circuit isolator Intelligent analogue addressable dual sounder controller with short circuit isolator Intelligent analogue addressable dual relay controller with short circuit isolator Short Circuit Isolating Base LPCB Ref. No. 164b/05 164q/01 164q/02 164q/03 164q/04 164q/05 164q/06 164q/07 164q/08 164q/01 164q/03 164q/05 164q/07 164n/01 164n/02 164n/03 164n/01 164p/07 164p/07 164p/08 164p/08 164p/09 164p/09 164p/10 164p/11 164p/10 164p/11 164q/01 164q/03 164q/05 164q/07 164n/01
12 Sep 2011
309
PART 1: SECTION 6
LINE UNITS
Certificated Products TC809E1068 TC810E1032 TC810E1040 TC810E1057 TC841E1019 Analogue addressable dual channel input and single channel output module with short circuit isolator Single channel output module with short circuit isolator Single channel 240V output module with short circuit isolator Single channel 240V output module, DIN rail mount with short circuit isolator Single channel 240V output module, DIN rail mount with short circuit isolator LPCB Ref. No. 199v/03 199v/04 199v/05 199v/06 199v/07
310
12 Sep 2011
PART 1: SECTION 6
LINE UNITS
12 Sep 2011
311
PART 1: SECTION 6
LINE UNITS
Certificated Products M701 M701-240 M701-240-DIN M710-CZ M710-CZR Single channel output module with short circuit isolator Single channel 240V output module with short circuit isolator Single channel 240V output module, DIN rail mount with short circuit isolator Conventional zone interface moudule Conventional zone monitor module with resistive end of line LPCB Ref. No. 199v/04 199v/05 199v/06 199v/07 199v/08
Pelco Finland Oy
Kalkkipellontie 6, PO Box 415, Fl-02601 Espoo, Finland Tel: +358 10 446 511 Fax: +358 10 446 5103 Website: www.pelco.com/nordic
Certificate No: 199x to EN 54-17: 2005 Certificate No: 199v to EN 54-17: 2005 and EN 54-18: 2005 Certificated Products EMISO524 EM210ECZ EM210E-CZR Short circuit isolator Conventional zone interface module Conventional zone monitor module with resistive end of line LPCB Ref. No. 199x/02 199v/07 199v/08
Certificate No: 199r to CEA GEI 1-052 Draft 2.0 (11-06-97) and prEN 54-17 Draft (July 2002) Certificate No: 199x to EN 54-17: 2005 Certificate No: 199v to EN 54-17: 2005 & EN 54-18: 2005 Certificated Products M200XE B524IEFT-1 ISO524-1 M210E M220E M221E M201E M201E-240 M201E-240-DIN M210E-CZ M210E-CZR Short circuit isolator module Short circuit isolator base Short circuit isolator module Analogue Addressable single channel input module with short circuit isolator Analogue addressable dual channel input module with short circuit isolator Analogue addressable dual channel input and single channel output module with short circuit isolator Single channel output module with short circuit isolator Single channel 240V output module with short circuit isolator Single channel 240V output module, DIN rail mount with short circuit isolator Conventional zone interface module Conventional zone monitor module with resistive end of line Will be labelled as M210E-CZR-yy, where yy indicates the protocol identifier option value between 00 and 99. LPCB Ref. No. 199r/01 199x/01 199x/02 199v/01 199v/02 199v/03 199v/04 199v/05 199v/06 199v/07 199v/08
312
12 Sep 2011
PART 1: SECTION 6
LINE UNITS
UK Sales: Tel: +44 (0)1189 783703 Fax: +44 (0)1189 775750 Website: www.sibt.com/www.uk.cerberus.com
Certificate No: 126m-(cl-1) to EN 54-17: 2005 and EN 54-18: 2005 Approved Products DC1192 Input/output module with short circuit isolator LPCB Ref. No. 126m/04
Certificate No: 126ae-(cl-1) to EN 54-17: 2005 Certificated Products FDCL221 Analogue addressable line separator with short circuit isolator LPCB Ref. No. 126ae/01
12 Sep 2011
313
PART 1: SECTION 6
LINE UNITS
Accessories: TS35 standard top hat rail Certificate No: 126ad-(cl-1) to EN 54-17: 2005 and EN 54-18: 2005 Certificated Products FDCI222 Analogue addressable input module with short circuit isolator Note: 1. Approved when used with FDCH291 or FDCH292 enclosure or in a CIE enclosure compliant with EN 54-2 Analogue addressable input/output module with short circuit isolator Note: 1. Approved when used with FDCH291 or FDCH292 enclosure or in a CIE enclosure compliant with EN 54-2 LPCB Ref. No. 126ad/01
FDCIO222
126ad/02
Accessories: FDCM291 mounting foot TS35 standard top hat rail FDCH291 enclosure FDCH292 sealed enclosure Certificate No: 126aq-(cl-1) to EN 54-17:2005 and EN 54-18:2005 Certificated Products FDCIO223 Addressable transponder incorporating short circuit isolators (FDCH292, FDCM291) Note: 1. Approved when used in conjunction with housing box FDCH292 Digital addressable mimic display driver (F50F410, 520379) Note: 1. Approved when used with a metal enclosure at least complying with protection IP30 and weighing at least 4.5kg Floor repeater terminal Floor repeater display Housing box Mounting foot LED flat cable AC/AC Transformer LPCB Ref. No. 126aq/01
FT2001-A1
126aq/02
Certificate No: 531h-(cl-1) to EN 54-17: 2005 and EN 54-18: 2005 Certificated Products FDCI221 FDCIO221 Analogue addressable input module Notes: 1. Approved when used with the FDCH221 Analogue addressable input module Notes: 1. Approved when used with the FDCH221 LPCB Ref. No. 531h/01 531h/02
Certificate No: 126au-(cl-1) to EN 54-17: 2005 Certificated Products FDCL221-M Multi line short circuit isolator module LPCB Ref. No. 126au/01
314
12 Sep 2011
PART 1: SECTION 6
LINE UNITS
SMS
Hamilton Industrial Park, 140 Waterside Road, Leicester LE5 1TN, United Kingdom Tel: +44 (0)116 246 2000 Fax: +44 (0)116 246 2300 E-mail: Nikki.Morgan@honeywell.com Website: www.gent.co.uk
Certificate No: 042ba to EN54-18: 2005, EN54-17: 2005 Certificated Products SEN-INT-INPUT SEN-INT-ACDIN SEN-INT-AC SEN-INT-AC SEN-INT-OUTPUT SEN-INT-4I0 Analogue addressable 1 input interface module with short circuit isolator low voltage (SEN-490 and SEN-492 boxes). Analogue addressable 1 output DIN rail mounting interface module with short circuit isolator, medium voltage. Analogue addressable 1 output DIN rail mounting interface module with short circuit isolator, medium voltage. Analogue addressable 1 output surface mounting interface module with short circuit isolator, medium voltage. Analogue addressable 1 input and 1 output interface module with short circuit isolator, low voltage (SEN-490 and SEN-492 boxes) Analogue addressable 4 input / output interface module with short circuit isolator, low voltage (SEN-490 and SEN-492 boxes) LPCB Ref. No. 042ba/01 042ba/02 042ba/03 042ba/03 042ba/04 042ba/05
Approved when used in conjunction with the FIRERAY 2000/50R/100R beam detector and BTM800 thermal module 681v/01
Detector driver module with short circuit isolator Notes: 1. Approved for use with enclosure models M520 and D800
12 Sep 2011
315
PART 1: SECTION 6
LINE UNITS
Certificated Products 2. The unit is approved when powered from an EN 54-4 approved power source LPCB Ref. No.
Certificate No: 262d to EFSG/F/95/007 Approved Products SIGA-CC1 SIGA-CC2 SIGA-CT1I SIGA-CT2I Single input signal module Note: Approved using personality code 5 Dual input signal module Note: Approved using personality code 7 Single input module Note: Approved using personality codes 3, 4 and 18 Dual input module Note: Approved using personality codes 3, 4 and 18 LPCB Ref. No. 262d/01 262d/02 262d/03 262d/04
316
12 Sep 2011
PART 1: SECTION 6
LINE UNITS
EA-IB1
092t/02
ZP752-2
092w/03
EA752-2
092w/03
SOUNDI2000
092w/03
Vimpex Limited
Star Lane, Great Wakering, Essex SS3 0PJ, United Kingdom Tel: +44 (0) 1702 216999 Fax: +44 (0) 1702 216699 E-mail: sales@vimpex.co.uk Website: www.vimpex.co.uk
Certificate No: 456b to EN 54-17: 2005 Certificate No: 456c to EN 54-17: 2005 and EN 54-18: 2005 Certificated Products BA873x0/MT/SCI Isolating sounder base (shallow) Notes: 1 Key for certification; x indicates body colour: 3 = White, 4 = Red. LPCB Ref. No. 456b/01
12 Sep 2011
317
PART 1: SECTION 6
LINE UNITS
Certificated Products 2 3 The device is approved when used with the DINT1 Interface (refer to LPCB Cert. Ref. 456c). The device is approved when used with the Hosiden Besson Sounder Banshee MT and Sounder/Strobe LED Flashtone Banshee MT. (refer to LPCB Cert. Ref. 715a). 456b/02 LPCB Ref. No.
BA873x1/MT/SCI
DINT1
Isolating sounder base (deep) Notes: 1 Key for certification; x indicates body colour: 3 = White, 4 = Red. 2 The device is approved when used with the DINT1 Interface (refer to LPCB Cert. Ref. 456c). 3 The device is approved when used with the Hosiden Besson Sounder Banshee MT and Sounder/Strobe LED Flashtone Banshee MT. (refer to LPCB Cert. Ref. 715a). Isolating Sounder Interface Card Notes: 1. The device is approved for use with the BA873xx/MT/SCI series Isolating Sounder Bases (refer to LPCB Cert. Ref. 456b)
456c/01
318
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES Fire alarm devices: The purpose of a fire alarm devices is to warn person(s) within, or in the vicinity of, a building of the occurrence of a fire emergency situation in order to enable such person(s) to take appropriate measures. Fire alarm warning devices could be sounders, visual alarm e.g. beacons, or even loudspeakers. These devices can be of different construction and may have different parameters for example sounders are defined in terms of frequency ranges, temporal patterns and output levels, beacons are defined in terms of light temporal pattern and frequency of flashing. Guidance on the type, frequency, temporal pattern, and output levels should be sought from the applicable installation rule or code of practice (e.g. BS 5839-1). For example BS 5839-1 recommends sounders with continuous output and frequency range between 500 Hz to 1000 Hz. Fire alarm devices may be used for other type of risk or non-fire emergency alarm. In this case it is always recommended that a different message, colour, temporal pattern, or frequency signal from the fire signal is selected to avoid confusion. This section lists alarm device approved for use indoors and outdoors in fire detection and fire alarm systems. The initial approval and continued approval processes for sounders are outlined in scheme document SD039. Products listed in this section have been approved to: EN 54-3: 2001 Sounders EN 54-3: 2001 + A1: 2002 + A2: 2006 Sounders The initial approval and continued approval processes for visual are outlined in scheme document SD115. Products listed in this section have been approved to: EN 54-23: 2010 visual alarms The initial approval and continued approval processes for loudspeakers are outlined in scheme document SD113. Products listed in this section have been approved to: EN 54-24: 2008 Loudspeakers Audit: Regular product auditing and regular factory inspections are carried out by LPCB ensuring high manufacturing standards and continued compliance with the applicable product standard. Notes: 1. EN 54-3: 2001 is now a harmonised standard for the Construction Products Directive and CE marking is required for most of the European market since 30 June 2005. It is therefore recommended that sounders are certificated to EN 54-3: 2001. 2. EN 54-23: 2010 is now a harmonised standard for the Construction Products Directive and CE marking is required for most of the European market since 30 March 2013. It is therefore recommended that sounders are certificated to EN 54-23: 2010. 3. EN 54-24: 2008 is now a harmonised standard for the Construction Products Directive and CE marking is required for most of the European market since 30 April 2011. It is therefore recommended that sounders are certificated to EN 54-24: 2008. 4. Since the LPCB uses national and international standards for the listing of products, in some instances the requirements of these standards may conflict with the recommendations of local codes of practice. We recommend that specifiers seek advice from the relevant local authorities and amend their specifications accordingly.
12 Sep 2011
319
PART 1: SECTION 7
ALARM WARNING DEVICES
Wireless Sounders
Certificated Products XPA-SO-14001-APO Xpander addressable sounder (Red ) (XPA-SB-10023-APO mounting base) Notes: 1) Meets the requirements of EN 54-3: 2001 at tones 1, 2, 3, 4, 5, 6, 7 & 13 2) The complete radio base/sounder combination is available as Apollo Part No.: XPA-CB-14001-APO 3) The device must be used with the following batteries only: MN1500 LR6 - 1.5 volt alkaline AA cells MN1400 LR14 - 1.5 volt alkaline C cells 4) The radio link functionality is not included within the scope of approval. Xpander addressable sounder (White) (XPA-SB-10024-APO mounting base) Notes: 1) Meets the requirements of EN 54-3: 2001 at tones 1, 2, 3, 4, 5, 6, 7 & 13 2) The complete radio base/sounder combination is available as Apollo Part No.: XPA-CB-14002-APO 3) The device must be used with the following batteries only: LPCB Ref. No. 010af/01
XPA-SO-14002-APO
010af/02
320
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products LPCB Ref. No.
XPA-SN-14003-APO
MN1500 LR6 - 1.5 volt alkaline AA cells MN1400 LR14 - 1.5 volt alkaline C cells 4) The radio link functionality is not included within the scope of approval. Xpander addressable sounder strobe (Red head / red lens) (XPA-SB-10023-APO mounting base) Notes: 1) Meets the requirements of EN 54-3: 2001 at tones 1, 2, 3, 4, 5, 6, 7 & 13 2) The complete radio base/sounder combination is available as Apollo Part No.: XPA-CB-14003-APO 3) The device must be used with the following batteries only: MN1500 LR6 - 1.5 volt alkaline AA cells MN1400 LR14 - 1.5 volt alkaline C cells 4) The radio link functionality is not included within the scope of approval.
Xpander addressable sounder beacon (Red head / amber lens) (XPA-SB-10024-APO mounting base) Notes: 1) Meets the requirements of EN 54-3: 2001 at tones 1, 2, 3, 4, 5, 6, 7 & 13 2) The complete radio base/sounder combination is available as Apollo Part No.: XPA-CB-14004-APO 3) The device must be used with the following batteries only: MN1500 LR6 - 1.5 volt alkaline AA cells MN1400 LR14 - 1.5 volt alkaline C cells 4) The radio link functionality is not included within the scope of approval. Xpander addressable sounder beacon (White head / clear lens) (XPA-SB-10024-APO mounting base) Notes: 1) Meets the requirements of EN 54-3: 2001 at tones 1, 2, 3, 4, 5, 6, 7 & 13 2) The complete radio base/sounder combination is available as Apollo Part No.: XPA-CB-14005-APO 3) The device must be used with the following batteries only: MN1500 LR6 - 1.5 volt alkaline AA cells MN1400 LR14 - 1.5 volt alkaline C cells 4) The radio link functionality is not included within the scope of approval.
010af/03
XPA-SN-14004-APO
010af/04
XPA-SN-14005-APO
010af/05
Bases: XPA-SB-10023-APO Radio link mounting base - red XPA-SB-10024-APO Radio link mounting base - white Certificate No: 010ak to EN54-3: 2001 +A1:2002 +A2:2006
Sounders
Certificated Products 55000-001 XP95 Type B intelligent open area sounder (Red) Note: 1. Meets the requirements of EN 54-3:2001 at the following tones: Apollo standard-840Hz,0.5s/558Hz,0.5s Dutch (slow whoop)- 500-1200Hz in 3.5s, 0.5s off German DIN-1200-500Hz over 1s XP95 Type B intelligent open area sounder (White) Note: 1. Meets the requirements of EN 54-3:2001 at the following tones: Apollo standard-840Hz,0.5s/558Hz,0.5s Dutch (slow whoop)- 500-1200Hz in 3.5s, 0.5s off German DIN-1200-500Hz over 1s XP95 Type B intelligent open area sounder beacon (Red) Note: 1. Meets the requirements of EN 54-3:2001 at the following tones: Apollo standard-840Hz,0.5s/558Hz,0.5s Dutch (slow whoop)- 500-1200Hz in 3.5s, 0.5s off German DIN-1200-500Hz over 1s XP95 Type B intelligent open area sounder beacon (White) Note: 1. Meets the requirements of EN 54-3:2001 at the following tones: Apollo standard-840Hz,0.5s/558Hz,0.5s Dutch (slow whoop)- 500-1200Hz in 3.5s, 0.5s off LPCB Ref. No. 010ak/01
55000-002
010ak/02
55000-005
010ak/03
55000-006
010ak/04
12 Sep 2011
321
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products German DIN-1200-500Hz over 1s 58000-005 Discovery Type B intelligent open area sounder beacon (Red) enhanced deep isolating bases) Note: 1. Meets the requirements of EN 54-3:2001 at the following tones: T1- Apollo Evacuation 558Hz,0.5s/840Hz,0.5s T3- Dutch Slow Whoop 500-1200Hz in 3.5s, 0.5s off T4- German DIN1200-500Hz over 1s Discovery Type B intelligent open area sounder beacon (White) enhanced deep isolating bases) Note: 1. Meets the requirements of EN 54-3:2001 at the following tones: T1- Apollo Evacuation 558Hz,0.5s/840Hz,0.5s T3- Dutch Slow Whoop 500-1200Hz in 3.5s, 0.5s off T4- German DIN1200-500Hz over 1s 010ak/05 LPCB Ref. No.
58000-007
010ak/06
Bases: 45681-517 Enhanced deep isolating base (White) 45681-518 Enhanced deep isolating base (Red)
Sounders
Certificated Products VLS100-H Analogue addressable Type A sounder with short circuit isolator Notes 1. Meets the requirements of EN 54-3 at the following tone settings: Slow whoop tone 500 to 1200Hz, 3s sweep, 0.5s silence Sweep (DIN) tone 1200 to 500Hz, 1Hz Continuous tone 990Hz, steady Analogue addressable Type A sounder with short circuit isolator Notes 1. Meets the requirements of EN 54-3 at the following tone settings: Dual tone 990 to 650Hz, 2Hz (250ms-250ms) Pulsed tone 990Hz, 1Hz (500ms ON 500ms OFF) Continuous tone 990Hz, steady LPCB Ref. No. 928g/02
VLS100
928g/01
Argus-Spectrum Co
65 Serdobolskaya St, St. Petersburg 197342, Russian Federation Tel: +7 812 7037500 Fax: +7 812 7037501 E-mail: mail@argus-spectr.ru Website: www.argus-spectr.ru
Certificate No: 928g-(cl-2) to EN54-3: 2001 + A1: 2002 and EN 54 -17: 2005 Certificated Products VLS100-H Analogue addressable Type A sounder with short circuit isolator Notes 1. Meets the requirements of EN 54-3 at the following tone settings: Slow whoop tone 300 to 1200Hz, 3s sweep, 0.5s silence LPCB Ref. No. 928g/02
322
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products Sweep (DIN) tone 1200 to 500Hz, 1Hz Continuous tone 990Hz, steady Analogue addressable Type A sounder with short circuit isolator Notes 1. Meets the requirements of EN 54-3 at the following tone settings: Dual tone 990 to 650Hz, 2Hz (250ms-250ms) Pulsed tone 990Hz, 1Hz (500ms ON 500ms OFF Continuous tone 990Hz, steady LPCB Ref. No. 928g/01
VLS100
VELOX VLS100-H
928g/02
116-BBQ-230/IP
378h/02
116-BBR-230
378h/03
12 Sep 2011
323
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products - General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5) - Evacuate (880Hz, 1 sec on / 1 sec off, forever) - Alert (880Hz On, forever) - Bell Test (0.5 sec on every 8 sec) - Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz) Addressable outdoor sounder with isolator Notes: 1) meets the requirements of EN 54-3: 2001 for the following tones: - General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5) - Evacuate (880Hz, 1 sec on / 1 sec off, forever) - Alert (880Hz On, forever) - Bell Test (0.5 sec on every 8 sec) - Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz) Addressable indoor base sounder with isolator Notes: 1) meets the requirements of EN 54-3: 2001 for the following tones: - General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5) - Evacuate (880Hz, 1 sec on / 1 sec off, forever) - Alert (880Hz On, forever) - Bell Test (0.5 sec on every 8 sec) - Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz) Addressable indoor base sounder and beacon with isolator Notes: 1) meets the requirements of EN 54-3: 2001 for the following tones: - General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5) - Evacuate (880Hz, 1 sec on / 1 sec off, forever) - Alert (880Hz On, forever) - Bell Test (0.5 sec on every 8 sec) - Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz) 2) the beacon functionality is not included within the scope of this approval Addressable indoor base sounder with isolator Notes: 1) meets the requirements of EN 54-3: 2001 for the following tones: - General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5) - Evacuate (880Hz, 1 sec on / 1 sec off, forever) - Alert (880Hz On, forever) - Bell Test (0.5 sec on every 8 sec) - Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz) Addressable indoor base sounder and beacon with isolator Notes: 1) meets the requirements of EN 54-3: 2001 for the following tones: - General Alarm (880Hz, 7*0.5 sec pulse & 1*5.5) - Evacuate (880Hz, 1 sec on / 1 sec off, forever) - Alert (880Hz On, forever) - Bell Test (0.5 sec on every 8 sec) - Slow Whoop (3.5 sec on / 0.5 sec off, 500-1200 Hz) 2) the beacon functionality is not included within the scope of this approval LPCB Ref. No.
116-BBR-230/IP
378h/04
116-BBR-130
378h/05
116-BBQ-130
378h/06
116-BBR-131
378h/07
116-BBQ-131
378h/08
324
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 6) - 925Hz : 15oms / Off : 600 ms 7) - 670 hZ : 250MS / 845 hZ : 370 MS 8) - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9) - 1200 Hz : 500 ms/ 500 Hz : 500 ms 10) - 970 Hz : 500 ms / Off : 500 ms 11) - Sweet 800 Hz - 970 Hz over 140 ms (7 Hz) 12) - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13) - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14) - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15) - Sweet 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16) - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17) - ISO8201 : 970 Hz : 500 ms 18) - ISO8201 : 2850 Hz : 500 ms 19) - 800 Hz : 250 ms / 970 Hz : 250 ms 20) - 2850 Hz Continuous 21) - 2400 Hz : 250 ms / 2850 Hz : 250 ms 22) - 800 Hz : 500 ms / 970 Hz : 500 ms 23) - 2850 Hz : 500 ms / Off : 500 ms 24) - 925 Hz : 250 ms / Off : 1000 ms 25) - 970 Hz Continuous 26) - 660 Hz : 1800 ms / Off: 1800 ms 27) - 660 Hz : 6500 ms / Off : 13000 ms 28) - 660 Hz Continuous 29) - 554 Hz : 500 ms / 440 Hz : 500 ms 30) - 660 Hz : 500 ms / Off : 500 ms 31) - 2850 Hz : 150 ms / Off : 100 ms 32) - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33) - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34) - 988 Hz : 250 ms / 645 Hz : 250 ms 35) - 510 Hz : 250 ms / 610 Hz : 250 ms 36) - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37) - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38) - 845 Hz Continuous 39) - 970 Hz : 1000 ms / Off : 1000 ms 40) - 800 Hz : 150 ms / 970 Hz : 150 ms 41) - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42) - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43) - 2850 Hz : 1000 ms / Off : 1000 ms 44) - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45) - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46) - 440 Hz : 600 ms / Off : 600 ms 47) - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48) - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49) - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50) - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51) - Whoop 500-1200 3.5s/0.5s Bases YBN -R/3 base YBO-R/SCI isolator base Certificate No: 715a-(cl-2) to EN54-3:2001 Certificated Products Banshee MT Sounder (892 shallow base version and 893 deep base version) 1. Certified to EN 54-3: 2001 with the following tones: Sound 2 Banshee LF Sound 143 Banshee HF (and Bedlam) Sound 19 Slow Whoop (Dutch) Sound 20 DIN Klung (German) 2. Approved as Type A when used with shallow base (892) & Type B when used with deep base (B93). 3. Approved voltage range 10-28V. Bases 892 shallow base 893 deep base LPCB Ref. No. 715a/01 LPCB Ref. No.
12 Sep 2011
325
PART 1: SECTION 7
ALARM WARNING DEVICES
ROLP/SV Roshni
378b/02
VTG-32E-DB
546a/01
VPR-DT
546a/02
326
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 1 - Evacuate Tone (500-1200Hz Rising Sweep over 3.5 Sec 0.5 Sec off) 2 - Alert Tone (970Hz Continuous Tone) 2) Certified at Maximum Volume only. Conventional indoor Type A sounder base Notes: 1) This sounder meets the requirements of EN 54-3:2001 for the following tones at low, medium and high volume settings: 1 - LF Sweep (Cranford sweep) (800-1000Hz @ 0.5 Sec) 3 - Alternative Warble (800-1000Hz @ 0.5 Sec) 11 - Dutch Sweep Tone (970Hz Cont) 25 - German DIN Tone (Sweep 1200-500Hz @ 1Hz) 27- French Tone AFNOR (554Hz 100ms and 440Hz for 400 ms) 2) Cover plate (Part No. 116-099) must be used . LPCB Ref. No.
VSO-32
546a/04
EMCO
125 El Alamean Street, El Mohandessin, Cairo, Egypt Tel: 00202 33 44 3 245 Fax: 00202 330 36 86 0 E-mail: emco@4emco.com Website: www.4emco.com
Certificate No: 928g to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005 Certificated Products AS200 Analogue addressable Type A sounder with short circuit isolator LPCB Ref. No. 928g/01
Notes: 1. Meets the requirements of EN 54-3 at the following tone settings: Dual tone 990 to 650Hz, 2Hz (250ms-250ms) Pulsed tone 990Hz, 1Hz (500ms ON - 500ms OFF) Continuous tone 990Hz, steady
12 Sep 2011
327
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products Notes: Meets the requirements of EN54-3: 2001 at the following tones 1-Alternating Tones 800/970Hz at 2Hz 2-Sweeping 800/970Hz at 7Hz LPCB Ref. No.
Gent By Honeywell
140 Waterside Road, Hamilton Industrial Park, Leicester LE5 1TN, United Kingdom Tel: +44 (0)116 246 2000 Fax: +44 (0)116 246 2300 E-mail: gent_enquiry@gent.co.uk Website: www.gent.co.uk
Certificate No: 042ah to EN 54-3: 2001 Certificate No: 042ar to EN 54-3: 2001 +A1 , CEA GEI 1-052- Draft 2.0 11-06-97 Certificate No: 042bj to EN 54-3: 2001 + A1: 2002 + A2: 2006, EN 54-17: 2005 Certificate No: 042bk to EN 54-3: 2001 + A1: 2002 + A2: 2006
328
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products S3-SN-R S3-SN-W S3IP-SN-R S3IP-SN-W S2IP-SN-R S2IP-SN-W S2IP-SN-R3 S2IP-SN-W3 S3-SN-ST-RR S3-SN-ST-WR S3IP-SN-ST-RR S3IP-SN-ST-WR S3IP-SN-ST-RW S31P-SN-ST-WA S3-VO-R S3-VO-W S3IP-VO-R S3IP-VO-W S2IP-VO-R S2IP-VO-W S3-VO-ST-RR S3-VO-ST-WR S3IP-VO-ST-RR S3IP-VO-ST-WR S3-SN-R S3-SN-W S3IP-SN-R S3IP-SN-W S2IP-SN-R S2IP-SN-W S2IP-SN-R3 S2IP-SN-W3 S3-SN-ST-RR S3-SN-ST-WR S3IP-SN-ST-RR S3IP-SN-ST-WR S3IP-SN-ST-RW S3IP-SN-ST-WA S3-SN-R-V2 Red LP Indoor Analogue Addressable Sounder White LP Indoor Analogue Addressable Sounder Red Outdoor Analogue Addressable Sounder White Outdoor Analogue Addressable System Sounder Red Outdoor Analogue Addressable System Sounder White Outdoor Analogue Addressable System Sounder 3 Way Red Outdoor Analogue Addressable System Sounder 3 Way White LP Outdoor Analogue Addressable Sounder/Strobe Red Lens Red LP Indoor Analogue Addressable Sounder/Strobe Red Lens White LP Indoor Analogue Addressable Sounder/Strobe Red Lens Red Outdoor Analogue Addressable Sounder/Strobe Red Lens White Outdoor LP Analogue Addressable Sounder/Strobe Red Lens Red Outdoor Analogue Addressable Sounder/Strobe 2 Way White Lens White Outdoor Analogue Addressable Sounder/Strobe 2 Way Amber Lens Red LP Indoor Voice Analogue Addressable Sounder White LP Indoor Voice Analogue Addressable Sounder Red LP Outdoor Voice Analogue Addressable Sounder White LP Outdoor Voice Analogue Addressable Sounder Red Outdoor Voice Analogue Addressable Sounder White Outdoor Voice Analogue Addressable Sounder Red LP Indoor Voice Analogue Addressable Sounder/Strobe Red Lens White LP Indoor Voice Analogue Addressable Sounder/Strobe Red Lens Red Outdoor Voice Analogue Addressable Sounder/Strobe Red Lens White LP Outdoor Voice Analogue Addressable Sounder/Strobe Red Lens Analogue Addressable Red LP Indoor Sounder with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable White LP Indoor Sounder with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable Red Outdoor Sounder with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable White Outdoor System Sounder with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable Red Outdoor System Sounder with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable White Outdoor System Sounder 3 Way with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable Red Outdoor System /Sounder 3 Way with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable White LP Outdoor Sounder/Strobe Red Lens with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable Red LP Indoor Sounder/Strobe Red Lens with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable White LP Indoor Sounder/Strobe Red Lens with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable Red Outdoor Sounder/Strobe Red Lens with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable White Outdoor LP Sounder/Strobe Red Lens with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable Red Outdoor Sounder/Strobe 2 Way White Lens with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Analogue Addressable White Outdoor Sounder / Strobe 2 Way Amber Lens with short circuit isolator Note: Meets the requirements of EN 54-3:2001 at Low Tone and High Tone Addressable Red LP Indoor Sounder with short circuit isolator Note: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. Analogue Addressable White LP Indoor Sounder with short circuit isolator Note: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. Analogue Addressable Red Outdoor Sounder with short circuit isolator Note: LPCB Ref. No. 042ah/01 042ah/02 042ah/03 042ah/04 042ah/05 042ah/06 042ah/07 042ah/08 042ah/09 042ah/10 042ah/11 042ah/12 042ah/13 042ah/14 042ah/15 042ah/16 042ah/17 042ah/18 042ah/19 042ah/20 042ah/21 042ah/22 042ah/23 042ah/24 042ar/01 042ar/02 042ar/03 042ar/04 042ar/05 042ar/06 042ar/07 042ar/08 042ar/09 042ar/10 042ar/11 042ar/12 042ar/13 042ar/14 042bj/01
S3-SN-W-V2
042bj/02
S3IP-SN-R-V2
042bj/03
12 Sep 2011
329
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. Analogue Addressable White Outdoor Sounder with short circuit isolator Note: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. Analogue Addressable White Outdoor Sounder with short circuit isolator Note: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. Analogue Addressable Red Outdoor Sounder with short circuit isolator Note: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. Analogue Addressable White Outdoor Sounder with short circuit isolator Note: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. Analogue Addressable Red LP Indoor Sounder/Strobe Red Lens with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable White LP Indoor Sounder/Strobe Red Lens with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable Red Outdoor Sounder/Strobe Red Lens with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable White Outdoor LP Sounder/Strobe Red Lens with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable Red Outdoor Sounder/Strobe White Lens with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable Red Outdoor System Voice Enhanced Sounder with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. LPCB Ref. No.
S3IP-SN-W-V2
042bj/04
S2IP-SN-R-V2
042bj/05
S2IP-SN-R-V2
042bj/05
S2IP-SN-W-V2
042bj/06
S3-SN-ST-RR-V2
042bj/07
S3-SN-ST-WR-V2
042bj/08
S3IP-SN-ST-RR-V2
042bj/09
S3IP-SN-ST-WR-V2
042bj/10
S3IP-SN-ST-RW-V2
042bj/11
S2IP-VP-R
042bj/12
330
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable Red LP Indoor Sounder Voice Enhanced with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable White LP Indoor Sounder Voice Enhanced with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable White LP Indoor Sounder Voice Enhanced /Strobe Red Lens with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable Red LP Indoor Sounder Voice Enhanced /Strobe Red Lens with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable Red Outdoor LP Sounder Voice Enhanced with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable White Outdoor LP Sounder Voice Enhanced with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable White Outdoor LP Sounder Voice Enhanced / Strobe Red Lens with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Analogue Addressable Red Outdoor LP Sounder Voice Enhanced / Strobe Red Lens with short circuit isolator Notes: 1. Meets the requirements of EN 54-3:2001 at tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes strobe function. Conventional Red LP Indoor Sounder Note: Meets the requirements of EN 54-3:2001 at Tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. LPCB Ref. No.
S3-VP-R
042bj/13
S3-VP-W
042bj/14
S3-VP-ST-WR
042bj/15
S3-VP-ST-RR
042bj/16
S3IP-VP-R
042bj/17
S3IP-VP-W
042bj/18
S3IP-VP-ST-WR
042bj/19
S3IP-VP-ST-RR
042bj/20
C3-SN-R-V2
042bk/01
12 Sep 2011
331
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products C3-SN-W-V2 Conventional White LP Indoor Sounder Note: Meets the requirements of EN 54-3:2001 at Tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. Conventional Red LP Outdoor Sounder Note: Meets the requirements of EN 54-3:2001 at Tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. Conventional White LP Outdoor Sounder Note: Meets the requirements of EN 54-3:2001 at Tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. Conventional Red LP Indoor Sounder/Strobe Red Lens Notes: 1. Meets the requirements of EN 54-3:2001 at Tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes Strobe function. Conventional White LP Indoor Sounder/Strobe Red Lens Notes: 1. Meets the requirements of EN 54-3:2001 at Tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes Strobe function. Conventional Red LP Outdoor Sounder/Strobe Red Lens Notes: 1. Meets the requirements of EN 54-3:2001 at Tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes Strobe function. Conventional White LP Outdoor Sounder/Strobe Red Lens Notes: 1. Meets the requirements of EN 54-3:2001 at Tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes Strobe function. Conventional Red LP Indoor Sounder Voice Enhanced /Strobe Red Lens Notes: 1. Meets the requirements of EN 54-3:2001 at Tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes Strobe function. Conventional White LP Indoor Sounder Voice Enhanced /Strobe Red Lens Notes: 1. Meets the requirements of EN 54-3:2001 at Tones: 1. Alternating tone 800/970 Hz @ 2Hz. 3. Intermittent tone 970 Hz @ 1Hz. 6. Continuous 970 Hz. 2. Certification excludes Strobe function. LPCB Ref. No. 042bk/02
C3IP-SN-R-V2
042bk/03
C3IP-SN-W-V2
042bk/04
C3-SN-ST-RR-V2
042bk/05
C3-SN-ST-WR-V2
042bk/06
C3IP-SN-ST-RR-V2
042bk/07
C3IP-SN-ST-WR-V2
042bk/08
C3-VP-ST-RR
042bk/09
C3-VP-ST-WR
042bk/10
Bases: Shallow Base IP31C Deep Base IP55C Note All products may be used with either base
332
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Gulf Security Technology Co. Ltd (Manufacturing Division of Global System Technology PLC)
No. 80 Changjiang East Road, Economic & Technological Development Zone, Qinhuangdao, Hebei Province 066004, China Tel: +86 0335 8502528 Fax: +86 0335 8508942 E-mail: gst@gst.com.cn Website: www.gst.com.cn
Certificate No: 548e to EN 54-3:2001 Certificated Products GST-HX-F8502 GST-HX-M8502 Conventional sounder strobe Notes: Meets the requirements of EN 54-3: 2001 at the following tones: Fixed tone: 1.35Hz (400ms on / 340ms off) Intelligent sounder strobe Notes: Meets the requirements of EN 54-3: 2001 at the following tones: Mode I (for pre alarm): 0.61Hz (430ms on / 1200ms off) Mode II (for fire alarm): 1.30Hz (430ms on / 340ms off) LPCB Ref. No. 548e/01 548e/02
12 Sep 2011
333
PART 1: SECTION 7
ALARM WARNING DEVICES
HDR
Grosvenor Road, Gillingham Business Park, Gillingham, Kent ME8 0SA, United Kingdom Tel: +44 (0)1634 260133 Fax: +44 (0)1634 260132 E-mail: info@hochikieurope.com Website: www.hochikieurope.com
Certificate No: 164h to EN 54 3: 2001 Certificated Products 1460040 Loop Powered Base Sounder (1426010 and 1226110 bases) Notes: 1) Meets the requirements of EN 54-3 at the following tones: 1 - 925 Hz : 250 ms / 628 Hz : 250 ms 2 - 925 Hz Continuous 3 - 628 Hz Continuous 4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms 5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms 6 - 925 Hz : 150 ms / Off : 600 ms 7 - 670 Hz : 250 ms / 845 Hz : 370 ms 8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9 - 1200 Hz : 500 ms / 500 Hz : 500 ms 10 - 970 Hz : 500 ms / Off : 500 ms 11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz) 12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17 - ISO8201 : 970 Hz : 500 ms 18 - ISO8201 : 2850 Hz : 500 ms 19 - 800 Hz : 250 ms / 970 Hz : 250 ms 20 - 2850 Hz Continuous 21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms 22 - 800 Hz : 500 ms / 970 Hz : 500 ms 23 - 2850 Hz : 500 ms / Off : 500 ms 24 - 925 Hz : 250 ms / Off : 1000 ms 25 - 970 Hz Continuous 26 - 660 Hz : 1800 ms / Off: 1800 ms 27 - 660 Hz : 6500 ms / Off : 13000 ms 28 - 660 Hz Continuous 29 - 554 Hz : 500 ms / 440 Hz : 500 ms 30 - 660 Hz : 500 ms / Off : 500 ms 31 - 2850 Hz : 150 ms / Off : 100 ms 32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34 - 988 Hz : 250 ms / 645 Hz : 250 ms 35 - 510 Hz : 250 ms / 610 Hz : 250 ms 36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38 - 845 Hz Continuous 39 - 970 Hz : 1000 ms / Off : 1000 ms 40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43 - 2850 Hz : 1000 ms / Off : 1000 ms 44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46 - 440 Hz : 600 ms / Off : 600 ms 47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51 - Whoop 500-1200 3.5s/0.5s Loop Powered Sounder/Base (1426010 and 1226110 bases) Notes 1) The beacon function of this device is not included in the scope of this approval 2) Meets the requirements of EN 54-3 at the following tones: 1 - 925 Hz : 250 ms / 628 Hz : 250 ms 2 - 925 Hz Continuous LPCB Ref. No. 164h/01
1460070
164h/03
334
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 3 - 628 Hz Continuous 4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms 5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms 6 - 925 Hz : 150 ms / Off : 600 ms 7 - 670 Hz : 250 ms / 845 Hz : 370 ms 8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9 - 1200 Hz : 500 ms / 500 Hz : 500 ms 10 - 970 Hz : 500 ms / Off : 500 ms 11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz) 12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17 - ISO8201 : 970 Hz : 500 ms 18 - ISO8201 : 2850 Hz : 500 ms 19 - 800 Hz : 250 ms / 970 Hz : 250 ms 20 - 2850 Hz Continuous 21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms 22 - 800 Hz : 500 ms / 970 Hz : 500 ms 23 - 2850 Hz : 500 ms / Off : 500 ms 24 - 925 Hz : 250 ms / Off : 1000 ms 25 - 970 Hz Continuous 26 - 660 Hz : 1800 ms / Off: 1800 ms 27 - 660 Hz : 6500 ms / Off : 13000 ms 28 - 660 Hz Continuous 29 - 554 Hz : 500 ms / 440 Hz : 500 ms 30 - 660 Hz : 500 ms / Off : 500 ms 31 - 2850 Hz : 150 ms / Off : 100 ms 32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34 - 988 Hz : 250 ms / 645 Hz : 250 ms 35 - 510 Hz : 250 ms / 610 Hz : 250 ms 36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38 - 845 Hz Continuous 39 - 970 Hz : 1000 ms / Off : 1000 ms 40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43 - 2850 Hz : 1000 ms / Off : 1000 ms 44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46 - 440 Hz : 600 ms / Off : 600 ms 47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51 - Whoop 500-1200 3.5s/0.5s Loop Powered Sounder Wall Sounder (1426010 and 1226110 bases) Notes: 1) Meets the requirements of EN 54-3 at the following tones: H1 - 925/628 at 2Hz H4 - French 554: 100ms / 440: 400ms H5 - Swedish 660: 150ms / Off: 150ms 8 - Whoop 500-1200 3s/0.5s 12 - Sweep 800/970 at 1Hz 15 - Sweep 2400-2850 at 1Hz 17 - 970:ISO8201 0.5s 18 - 2850:ISO820 0.5s Loop powered wall sounder beacon (YBN-R/3 and YBO-R/SCI bases) Note: 1 The beacon function of this device is not included in the scope of this approval 2 Meets the requirements of EN 54-3 at the following tones: 1 - 925 Hz : 250 ms / 628 Hz : 250 ms 2 - 925 Hz Continuous 3 - 628 Hz Continuous 4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms 5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms 6 - 925 Hz : 150 ms / Off : 600 ms 7 - 670 Hz : 250 ms / 845 Hz : 370 ms LPCB Ref. No.
1460050
164h/02
1460090
164h/04
12 Sep 2011
335
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9 - 1200 Hz : 500 ms / 500 Hz : 500 ms 10 - 970 Hz : 500 ms / Off : 500 ms 11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz) 12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17 - ISO8201 : 970 Hz : 500 ms 18 - ISO8201 : 2850 Hz : 500 ms 19 - 800 Hz : 250 ms / 970 Hz : 250 ms 20 - 2850 Hz Continuous 21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms 22 - 800 Hz : 500 ms / 970 Hz : 500 ms 23 - 2850 Hz : 500 ms / Off : 500 ms 24 - 925 Hz : 250 ms / Off : 1000 ms 25 - 970 Hz Continuous 26 - 660 Hz : 1800 ms / Off: 1800 ms 27 - 660 Hz : 6500 ms / Off : 13000 ms 28 - 660 Hz Continuous 29 - 554 Hz : 500 ms / 440 Hz : 500 ms 30 - 660 Hz : 500 ms / Off : 500 ms 31 - 2850 Hz : 150 ms / Off : 100 ms 32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34 - 988 Hz : 250 ms / 645 Hz : 250 ms 35 - 510 Hz : 250 ms / 610 Hz : 250 ms 36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38 - 845 Hz Continuous 39 - 970 Hz : 1000 ms / Off : 1000 ms 40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43 - 2850 Hz : 1000 ms / Off : 1000 ms 44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46 - 440 Hz : 600 ms / Off : 600 ms 47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51 - Whoop 500-1200 3.5s/0.5s LPCB Ref. No.
336
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms 6 - 925 Hz : 150 ms / Off : 600 ms 7 - 670 Hz : 250 ms / 845 Hz : 370 ms 8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9 - 1200 Hz : 500 ms / 500 Hz : 500 ms 10 - 970 Hz : 500 ms / Off : 500 ms 11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz) 12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17 - ISO8201 : 970 Hz : 500 ms 18 - ISO8201 : 2850 Hz : 500 ms 19 - 800 Hz : 250 ms / 970 Hz : 250 ms 20 - 2850 Hz Continuous 21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms 22 - 800 Hz : 500 ms / 970 Hz : 500 ms 23 - 2850 Hz : 500 ms / Off : 500 ms 24 - 925 Hz : 250 ms / Off : 1000 ms 25 - 970 Hz Continuous 26 - 660 Hz : 1800 ms / Off: 1800 ms 27 - 660 Hz : 6500 ms / Off : 13000 ms 28 - 660 Hz Continuous 29 - 554 Hz : 500 ms / 440 Hz : 500 ms 30 - 660 Hz : 500 ms / Off : 500 ms 31 - 2850 Hz : 150 ms / Off : 100 ms 32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34 - 988 Hz : 250 ms / 645 Hz : 250 ms 35 - 510 Hz : 250 ms / 610 Hz : 250 ms 36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38 - 845 Hz Continuous 39 - 970 Hz : 1000 ms / Off : 1000 ms 40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43 - 2850 Hz : 1000 ms / Off : 1000 ms 44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46 - 440 Hz : 600 ms / Off : 600 ms 47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51 - Whoop 500-1200 3.5s/0.5s Loop powered base sounder white version (YBN-R/3 and YBO-R/SCI bases) Note: 1) Meets the requirements of EN 54-3 at the following tones: 1 - 925 Hz : 250 ms / 628 Hz : 250 ms 2 - 925 Hz Continuous 3 - 628 Hz Continuous 4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms 5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms 6 - 925 Hz : 150 ms / Off : 600 ms 7 - 670 Hz : 250 ms / 845 Hz : 370 ms 8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9 - 1200 Hz : 500 ms / 500 Hz : 500 ms 10 - 970 Hz : 500 ms / Off : 500 ms 11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz) 12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17 - ISO8201 : 970 Hz : 500 ms 18 - ISO8201 : 2850 Hz : 500 ms 19 - 800 Hz : 250 ms / 970 Hz : 250 ms 20 - 2850 Hz Continuous 21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms 22 - 800 Hz : 500 ms / 970 Hz : 500 ms LPCB Ref. No.
YBO-BS(WHT)
164h/01
12 Sep 2011
337
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 23 - 2850 Hz : 500 ms / Off : 500 ms 24 - 925 Hz : 250 ms / Off : 1000 ms 25 - 970 Hz Continuous 26 - 660 Hz : 1800 ms / Off: 1800 ms 27 - 660 Hz : 6500 ms / Off : 13000 ms 28 - 660 Hz Continuous 29 - 554 Hz : 500 ms / 440 Hz : 500 ms 30 - 660 Hz : 500 ms / Off : 500 ms 31 - 2850 Hz : 150 ms / Off : 100 ms 32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34 - 988 Hz : 250 ms / 645 Hz : 250 ms 35 - 510 Hz : 250 ms / 610 Hz : 250 ms 36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38 - 845 Hz Continuous 39 - 970 Hz : 1000 ms / Off : 1000 ms 40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43 - 2850 Hz : 1000 ms / Off : 1000 ms 44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46 - 440 Hz : 600 ms / Off : 600 ms 47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51 - Whoop 500-1200 3.5s/0.5s Loop powered wall sounder (YBN-R/3 and YBO-R/SCI bases) Note: 1) Meets the requirements of EN 54-3 at the following tones: H1 - 925/628 at 2Hz H4 - French 554: 100ms / 440: 400ms H5 - Swedish 660: 150ms / Off: 150ms 8 - Whoop 500-1200 3s/0.5s 12 - Sweep 800/970 at 1Hz 15 - Sweep 2400-2850 at 1Hz 17 - 970:ISO8201 0.5s 18 - 2850:ISO820 0.5s Loop powered wall sounder - white version (YBN-R/3 and YBO-R/SCI bases) Note: 1) Meets the requirements of EN 54-3 at the following tones: H1 - 925/628 at 2Hz H4 - French 554: 100ms / 440: 400ms H5 - Swedish 660: 150ms / Off: 150ms 8 - Whoop 500-1200 3s/0.5s 12 - Sweep 800/970 at 1Hz 15 - Sweep 2400-2850 at 1Hz 17 - 970:ISO8201 0.5s 18 - 2850:ISO820 0.5s Loop powered wall sounder - weatherproof version (YBN-R/3, YBO-R/SCI and WS2WPK base) Note: 1) Meets the requirements of EN 54-3 at the following tones: H1 - 925/628 at 2Hz H4 - French 554: 100ms / 440: 400ms H5 - Swedish 660: 150ms / Off: 150ms 8 - Whoop 500-1200 3s/0.5s 12 - Sweep 800/970 at 1Hz 15 - Sweep 2400-2850 at 1Hz 17 - 970:ISO8201 0.5s 18 - 2850:ISO820 0.5s Loop powered base sounder and beacon (YBN-R/3 and YBO-R/SCI bases) Notes: 1) The beacon function of this device is not included in the scope of this approval 2) Meets the requirements of EN 54-3 at the following tones: 1 - 925 Hz : 250 ms / 628 Hz : 250 ms 2 - 925 Hz Continuous 3 - 628 Hz Continuous 4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms 5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms LPCB Ref. No.
CHQ-WS2(HFP)
164h/02
CHQ-WS2(WHT)
164h/02
CHQ-WS2/W
164h/02
YBO-BSB(HFP)
164h/03
338
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 6 - 925 Hz : 150 ms / Off : 600 ms 7 - 670 Hz : 250 ms / 845 Hz : 370 ms 8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9 - 1200 Hz : 500 ms / 500 Hz : 500 ms 10 - 970 Hz : 500 ms / Off : 500 ms 11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz) 12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17 - ISO8201 : 970 Hz : 500 ms 18 - ISO8201 : 2850 Hz : 500 ms 19 - 800 Hz : 250 ms / 970 Hz : 250 ms 20 - 2850 Hz Continuous 21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms 22 - 800 Hz : 500 ms / 970 Hz : 500 ms 23 - 2850 Hz : 500 ms / Off : 500 ms 24 - 925 Hz : 250 ms / Off : 1000 ms 25 - 970 Hz Continuous 26 - 660 Hz : 1800 ms / Off: 1800 ms 27 - 660 Hz : 6500 ms / Off : 13000 ms 28 - 660 Hz Continuous 29 - 554 Hz : 500 ms / 440 Hz : 500 ms 30 - 660 Hz : 500 ms / Off : 500 ms 31 - 2850 Hz : 150 ms / Off : 100 ms 32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34 - 988 Hz : 250 ms / 645 Hz : 250 ms 35 - 510 Hz : 250 ms / 610 Hz : 250 ms 36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38 - 845 Hz Continuous 39 - 970 Hz : 1000 ms / Off : 1000 ms 40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43 - 2850 Hz : 1000 ms / Off : 1000 ms 44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46 - 440 Hz : 600 ms / Off : 600 ms 47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51 - Whoop 500-1200 3.5s/0.5s Loop powered base sounder and beacon white version (YBN-R/3 and YBO-R/SCI bases) Notes: 1) The beacon function of this device is not included in the scope of this approval 2) Meets the requirements of EN 54-3 at the following tones: 1 - 925 Hz : 250 ms / 628 Hz : 250 ms 2 - 925 Hz Continuous 3 - 628 Hz Continuous 4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms 5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms 6 - 925 Hz : 150 ms / Off : 600 ms 7 - 670 Hz : 250 ms / 845 Hz : 370 ms 8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9 - 1200 Hz : 500 ms / 500 Hz : 500 ms 10 - 970 Hz : 500 ms / Off : 500 ms 11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz) 12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17 - ISO8201 : 970 Hz : 500 ms 18 - ISO8201 : 2850 Hz : 500 ms 19 - 800 Hz : 250 ms / 970 Hz : 250 ms 20 - 2850 Hz Continuous 21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms LPCB Ref. No.
YBO-BSB(WHT)
164h/03
12 Sep 2011
339
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 22 - 800 Hz : 500 ms / 970 Hz : 500 ms 23 - 2850 Hz : 500 ms / Off : 500 ms 24 - 925 Hz : 250 ms / Off : 1000 ms 25 - 970 Hz Continuous 26 - 660 Hz : 1800 ms / Off: 1800 ms 27 - 660 Hz : 6500 ms / Off : 13000 ms 28 - 660 Hz Continuous 29 - 554 Hz : 500 ms / 440 Hz : 500 ms 30 - 660 Hz : 500 ms / Off : 500 ms 31 - 2850 Hz : 150 ms / Off : 100 ms 32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34 - 988 Hz : 250 ms / 645 Hz : 250 ms 35 - 510 Hz : 250 ms / 610 Hz : 250 ms 36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38 - 845 Hz Continuous 39 - 970 Hz : 1000 ms / Off : 1000 ms 40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43 - 2850 Hz : 1000 ms / Off : 1000 ms 44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46 - 440 Hz : 600 ms / Off : 600 ms 47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51 - Whoop 500-1200 3.5s/0.5s Loop powered base sounder (YBN-R/3 and YBO-R/SCI bases) Notes: 1) Meets the requirements of EN 54-3 at the following tones: 1 - 925 Hz : 250 ms / 628 Hz : 250 ms 2 - 925 Hz Continuous 3 - 628 Hz Continuous 4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms 5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms 6 - 925 Hz : 150 ms / Off : 600 ms 7 - 670 Hz : 250 ms / 845 Hz : 370 ms 8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9 - 1200 Hz : 500 ms / 500 Hz : 500 ms 10 - 970 Hz : 500 ms / Off : 500 ms 11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz) 12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17 - ISO8201 : 970 Hz : 500 ms 18 - ISO8201 : 2850 Hz : 500 ms 19 - 800 Hz : 250 ms / 970 Hz : 250 ms 20 - 2850 Hz Continuous 21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms 22 - 800 Hz : 500 ms / 970 Hz : 500 ms 23 - 2850 Hz : 500 ms / Off : 500 ms 24 - 925 Hz : 250 ms / Off : 1000 ms 25 - 970 Hz Continuous 26 - 660 Hz : 1800 ms / Off: 1800 ms 27 - 660 Hz : 6500 ms / Off : 13000 ms 28 - 660 Hz Continuous 29 - 554 Hz : 500 ms / 440 Hz : 500 ms 30 - 660 Hz : 500 ms / Off : 500 ms 31 - 2850 Hz : 150 ms / Off : 100 ms 32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34 - 988 Hz : 250 ms / 645 Hz : 250 ms 35 - 510 Hz : 250 ms / 610 Hz : 250 ms 36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38 - 845 Hz Continuous 39 - 970 Hz : 1000 ms / Off : 1000 ms LPCB Ref. No.
YBO-BS
164h/01
340
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43 - 2850 Hz : 1000 ms / Off : 1000 ms 44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46 - 440 Hz : 600 ms / Off : 600 ms 47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51 - Whoop 500-1200 3.5s/0.5s Loop powered base sounder and beacon (YBN-R/3 and YBO=R/SCI bases) Notes: 1) The beacon function of this device is not included in the scope of this approval 2) Meets the requirements of EN 54-3 at the following tones: 1 - 925 Hz : 250 ms / 628 Hz : 250 ms 2 - 925 Hz Continuous 3 - 628 Hz Continuous 4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms 5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms 6 - 925 Hz : 150 ms / Off : 600 ms 7 - 670 Hz : 250 ms / 845 Hz : 370 ms 8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9 - 1200 Hz : 500 ms / 500 Hz : 500 ms 10 - 970 Hz : 500 ms / Off : 500 ms 11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz) 12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17 - ISO8201 : 970 Hz : 500 ms 18 - ISO8201 : 2850 Hz : 500 ms 19 - 800 Hz : 250 ms / 970 Hz : 250 ms 20 - 2850 Hz Continuous 21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms 22 - 800 Hz : 500 ms / 970 Hz : 500 ms 23 - 2850 Hz : 500 ms / Off : 500 ms 24 - 925 Hz : 250 ms / Off : 1000 ms 25 - 970 Hz Continuous 26 - 660 Hz : 1800 ms / Off: 1800 ms 27 - 660 Hz : 6500 ms / Off : 13000 ms 28 - 660 Hz Continuous 29 - 554 Hz : 500 ms / 440 Hz : 500 ms 30 - 660 Hz : 500 ms / Off : 500 ms 31 - 2850 Hz : 150 ms / Off : 100 ms 32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34 - 988 Hz : 250 ms / 645 Hz : 250 ms 35 - 510 Hz : 250 ms / 610 Hz : 250 ms 36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38 - 845 Hz Continuous 39 - 970 Hz : 1000 ms / Off : 1000 ms 40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43 - 2850 Hz : 1000 ms / Off : 1000 ms 44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46 - 440 Hz : 600 ms / Off : 600 ms 47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51 - Whoop 500-1200 3.5s/0.5s Loop powered wall sounder (YBN-R/3 and YBO-R/SCI bases) Note: 1) Meets the requirements of EN 54-3 at the following tones: H1 - 925/628 at 2Hz LPCB Ref. No.
YBO-BSB
164h/03
CHQ-WS2
164h/02
12 Sep 2011
341
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products H4 - French 554: 100ms / 440: 400ms H5 - Swedish 660: 150ms / Off: 150ms 8 - Whoop 500-1200 3s/0.5s 12 - Sweep 800/970 at 1Hz 15 - Sweep 2400-2850 at 1Hz 17 - 970:ISO8201 0.5s 18 - 2850:ISO820 0.5s Loop powered wall sounder beacon (YBN-R/3 and YBO-R/SCI bases) Note: 1 The beacon function of this device is not included in the scope of this approval 2 Meets the requirements of EN 54-3 at the following tones: 1 - 925 Hz : 250 ms / 628 Hz : 250 ms 2 - 925 Hz Continuous 3 - 628 Hz Continuous 4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms 5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms 6 - 925 Hz : 150 ms / Off : 600 ms 7 - 670 Hz : 250 ms / 845 Hz : 370 ms 8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9 - 1200 Hz : 500 ms / 500 Hz : 500 ms 10 - 970 Hz : 500 ms / Off : 500 ms 11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz) 12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17 - ISO8201 : 970 Hz : 500 ms 18 - ISO8201 : 2850 Hz : 500 ms 19 - 800 Hz : 250 ms / 970 Hz : 250 ms 20 - 2850 Hz Continuous 21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms 22 - 800 Hz : 500 ms / 970 Hz : 500 ms 23 - 2850 Hz : 500 ms / Off : 500 ms 24 - 925 Hz : 250 ms / Off : 1000 ms 25 - 970 Hz Continuous 26 - 660 Hz : 1800 ms / Off: 1800 ms 27 - 660 Hz : 6500 ms / Off : 13000 ms 28 - 660 Hz Continuous 29 - 554 Hz : 500 ms / 440 Hz : 500 ms 30 - 660 Hz : 500 ms / Off : 500 ms 31 - 2850 Hz : 150 ms / Off : 100 ms 32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34 - 988 Hz : 250 ms / 645 Hz : 250 ms 35 - 510 Hz : 250 ms / 610 Hz : 250 ms 36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38 - 845 Hz Continuous 39 - 970 Hz : 1000 ms / Off : 1000 ms 40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43 - 2850 Hz : 1000 ms / Off : 1000 ms 44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46 - 440 Hz : 600 ms / Off : 600 ms 47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51 - Whoop 500-1200 3.5s/0.5s CHQ-WSB (WHT) Loop powered wall sounder beacon (YBN-R/3 and YBO-R/SCI bases) Note: 1 The beacon function of this device is not included in the scope of this approval 2 Meets the requirements of EN 54-3 at the following tones: 1 - 925 Hz : 250 ms / 628 Hz : 250 ms 2 - 925 Hz Continuous 3 - 628 Hz Continuous 164h/04 LPCB Ref. No.
CHQ-WSB
164h/04
342
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms 5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms 6 - 925 Hz : 150 ms / Off : 600 ms 7 - 670 Hz : 250 ms / 845 Hz : 370 ms 8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9 - 1200 Hz : 500 ms / 500 Hz : 500 ms 10 - 970 Hz : 500 ms / Off : 500 ms 11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz) 12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17 - ISO8201 : 970 Hz : 500 ms 18 - ISO8201 : 2850 Hz : 500 ms 19 - 800 Hz : 250 ms / 970 Hz : 250 ms 20 - 2850 Hz Continuous 21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms 22 - 800 Hz : 500 ms / 970 Hz : 500 ms 23 - 2850 Hz : 500 ms / Off : 500 ms 24 - 925 Hz : 250 ms / Off : 1000 ms 25 - 970 Hz Continuous 26 - 660 Hz : 1800 ms / Off: 1800 ms 27 - 660 Hz : 6500 ms / Off : 13000 ms 28 - 660 Hz Continuous 29 - 554 Hz : 500 ms / 440 Hz : 500 ms 30 - 660 Hz : 500 ms / Off : 500 ms 31 - 2850 Hz : 150 ms / Off : 100 ms 32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34 - 988 Hz : 250 ms / 645 Hz : 250 ms 35 - 510 Hz : 250 ms / 610 Hz : 250 ms 36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38 - 845 Hz Continuous 39 - 970 Hz : 1000 ms / Off : 1000 ms 40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43 - 2850 Hz : 1000 ms / Off : 1000 ms 44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46 - 440 Hz : 600 ms / Off : 600 ms 47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51 - Whoop 500-1200 3.5s/0.5s Loop powered wall sounder beacon (YBN-R/3 and YBO-R/SCI bases) Note: 1 The beacon function of this device is not included in the scope of this approval 2 Meets the requirements of EN 54-3 at the following tones: 1 - 925 Hz : 250 ms / 628 Hz : 250 ms 2 - 925 Hz Continuous 3 - 628 Hz Continuous 4 - (French) 554 Hz : 100 ms / 440 Hz : 400 ms 5 - (Swedish) 660 Hz : 150 ms / Off : 150 ms 6 - 925 Hz : 150 ms / Off : 600 ms 7 - 670 Hz : 250 ms / 845 Hz : 370 ms 8 - Whoop 500 Hz - 1200 Hz : 3000 ms / Off : 500 ms 9 - 1200 Hz : 500 ms / 500 Hz : 500 ms 10 - 970 Hz : 500 ms / Off : 500 ms 11 - Sweep 800 Hz - 970 Hz over 140 ms (7 Hz) 12 - Sweep 800 Hz - 970 Hz over 1000 ms (1 Hz) 13 - Sweep 800 Hz - 970 Hz over 20 ms (50 Hz) 14 - Sweep 2400 Hz - 2850 Hz over 140 ms (7 Hz) 15 - Sweep 2400 Hz - 2850 Hz over 1000 ms (1 Hz) 16 - Sweep 300 Hz - 1200 Hz over 1000 ms (1 Hz) 17 - ISO8201 : 970 Hz : 500 ms 18 - ISO8201 : 2850 Hz : 500 ms 19 - 800 Hz : 250 ms / 970 Hz : 250 ms 20 - 2850 Hz Continuous LPCB Ref. No.
CHQ-WSB(HFP)
164h/04
12 Sep 2011
343
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 21 - 2400 Hz : 250 ms / 2850 Hz : 250 ms 22 - 800 Hz : 500 ms / 970 Hz : 500 ms 23 - 2850 Hz : 500 ms / Off : 500 ms 24 - 925 Hz : 250 ms / Off : 1000 ms 25 - 970 Hz Continuous 26 - 660 Hz : 1800 ms / Off: 1800 ms 27 - 660 Hz : 6500 ms / Off : 13000 ms 28 - 660 Hz Continuous 29 - 554 Hz : 500 ms / 440 Hz : 500 ms 30 - 660 Hz : 500 ms / Off : 500 ms 31 - 2850 Hz : 150 ms / Off : 100 ms 32 - Sweep 2400 Hz - 2850 Hz over 20 ms (50 Hz) 33 - Sweep 800 Hz - 970 Hz over 500 ms (2 Hz) 34 - 988 Hz : 250 ms / 645 Hz : 250 ms 35 - 510 Hz : 250 ms / 610 Hz : 250 ms 36 - Sweep 800 Hz - 970 Hz over 110 ms (9 Hz) 37 - Sweep 800 Hz - 970 Hz over 330 ms (3 Hz) 38 - 845 Hz Continuous 39 - 970 Hz : 1000 ms / Off : 1000 ms Continued . 40 - 800 Hz : 150 ms / 970 Hz : 150 ms 41 - Sweep 2400 Hz - 2850 Hz over 110 ms (9 Hz) 42 - Sweep 2400 Hz - 2850 Hz over 330 ms (3 Hz) 43 - 2850 Hz : 1000 ms / Off : 1000 ms 44 - 2400 Hz : 150 ms / 2850 Hz : 150 ms 45 - (German) Whoop 1200 Hz - 500 Hz : 1000ms / Off : 10 ms 46 - 440 Hz : 600 ms / Off : 600 ms 47 - Whoop 500 Hz - 1200 Hz : 3750 ms / Off : 250 ms 48 - ISO8201 : 925 Hz, 628 Hz : 250 ms / Off 500 ms 49 - ISO8201 : Sweep 300 Hz - 1200 Hz : 500 ms / Off : 500 ms 50 - ISO8201 : Sweep 1200 Hz - 300 Hz : 500 ms / Off : 500 ms 51 - Whoop 500-1200 3.5s/0.5s Bases: YBN-R/3 Analogue mounting base (ivory and white) YBO-R/SCI Isolator base LPCB Ref. No.
AH-03127-BS
506e/03
344
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Flashtone Banshee MT
715a/02
715a/03
Wafer MT
715a/04
Bipolar Banshee MT
715a/05
12 Sep 2011
345
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products Sound 15 Banshee / Bedlam HF Continuous - Continuous 2900Hz @ 3Hz Sound 19 Slow Whoop (Dutch) - 500Hz - 1200Hz over 3.5s then silence for 0.5s repeat Sound 20 DIN Tone (DK) - 1200Hz - 500Hz over 1s, silence 10ms repeat Sound 21 French Fire Sound - 554Hz for 100ms & 440Hz for 400ms Conventional 2 tone sounder Notes: 1) Suitable for Type A indoor application only 2) Approved with body moulding colour variations 3) Meets requirements of EN 54-3: 2001 with the following tones: Sound 1 Continuous 850 Hz Sound 2 Fast Sweep 800 - 950 Hz @ 9 Hz LPCB Ref. No.
FM Bedroom
715a/06
Bases: Shallow base (various colour options) Deep base (various colour options)
WMSOU-xx-Pww
166c/10
346
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products IBSST-xx-Pww Intelligent integrated detector base sounder strobe Notes: 1. ww (Range 0-99 odd numbers only) indicates the communication software protocol 2. X x indicates body colour. R =Red, W =Bright White, D =Detector White, K =Black, P =Pure White 3. x X indicates lens colour. R =Red, A =Amber, G =Green, B =Blue, C =Clear 4. Meets the requirements of EN54-3 for all tones at voltage range 15-32 VDC with the exception of Tones 4,10,11,17 and 20, which are approved at maximum volume only Intelligent integrated detector base sounder Notes: 1. ww (Range 0-99 odd numbers only) indicates the communication software protocol 2. xx indicates body colour. RR =Red, WW =Bright White, DD =Detector White, KK =Black, PW =Pure White 3. Meets the requirements of EN54-3 for all tones at voltage range 15-32 VDC with the exception of Tones 4,10,11,17 and 20, which are approved at maximum volume only Conventional Type A wall mounted sounder (red) Note: Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 10-14 VDC and 21-27 VDC Conventional Type A wall mounted sounder (white) Note: Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 10-14 VDC and 21-27 VDC Conventional Type A sounder base (white) Note: Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 10-14 VDC and 21-27 VDC Conventional Type A sounder base (white), supplied with red lid Note: Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 10-14 VDC and 21-27 VDC Conventional Type A sounder base (white), supplied with white lid Note: Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 10-14 VDC and 21-27 VDC Conventional Type A wall mounted sounder Note: Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 10-14 VDC and 21-27 VDC Intelligent wall mounted sounder strobe with short circuit isolator Notes: 1. ww (Range 0-99 even numbers only indicates the ommunication software protocol 2. X x indicates body colour. R =Red, W =Bright White, P =Pure White 3. x X indicates lens colour. R =Red, A =Amber, G =Green, B =Blue, C =Clear 4. Meets the requirements of EN54-3 for all tones and output levels at voltage range 1528v Intelligent wall mounted sounder with short circuit isolator Notes: 1. ww (Range 0-99 even numbers only) indicates the communication software protocol 2. xx indicates body colour. RR =Red, WW =Bright White, PW =Pure White 3. Meets the requirements of EN54-3 for all tones and output levels at voltage range 1528v Intelligent integrated detector base sounder strobe with short circuit isolator Notes: 1. ww (Range 0-99 even numbers only) indicates the communication software protocol 2. X x indicates body colour. R =Red, W =Bright White, D =Detector White, K =Black, P =Pure White 3. x X indicates lens colour. R =Red, A =Amber, G =Green, B =Blue, C =Clear 4. Meets the requirements of EN54-3 for all tones at voltage range 15-28v with the exception of Tones 4,10,11,17 and 20, which are approved at maximum volume only Intelligent integrated detector base sounder with short circuit isolator Notes: 1. ww (Range 0-99 even numbers only) indicates the communication software protocol 2. xx indicates body colour. RR =Red, WW =Bright White, DD =Detector White, KK =Black, PW =Pure White 3. Meets the requirements of EN54-3 for all tones at voltage range 15-28v with the exception of Tones 4,10,11,17 and 20, which are approved at maximum volume only Conventional Type A wall mounted sounder strobe (ELPBR/W, ESBR/W and ESBRS/WS bases) Notes: 1) Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 10LPCB Ref. No. 166c/11
IBSOU-xx-Pww
166c/12
EMA1224FR
166c/15
WMSOU-xx-Pww
166d/02
IBSST-xx-Pww
166d/03
IBSOU-xx-Pww
166d/04
EMA12Fxxxx
166c/31
12 Sep 2011
347
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 14 VDC 2) XX xx indicates body colour. RS =Red, WS =White 3) xx XX indicates lens colour. SR =Red, SA =Amber, SC =Clear Conventional Type A wall mounted sounder strobe (ELPBR/W, ESBR/W and ESBRS/WS bases) Notes: 1) Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 2127 VDC 2) XX xx indicates body colour. RS =Red, WS =White 3) xx XX indicates lens colour. S -=Red and Amber supplied, SR =Red, SA =Amber, SB =Blue Conventional Type A wall mounted sounder strobe (white) (ELPBR/W, ESBR/W and ESBRS/WS bases) Notes: 1) Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 1014 VDC 2) XX Wx indicates base type. LP =ELPBR/W, - S =ESBR/W, SS =ESBRS/WS. 3) xxW X indicates lens colour. R =Red, A =Amber, B =Blue, G =Green Conventional Type A wall mounted sounder strobe (red) (ELPBR/W, ESBR/W and ESBRS/WS bases) Notes: 1) Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 2127 VDC 2) XX Rx indicates base type. LP =ELPBR/W, - S =ESBR/W, SS =ESBRS/WS. 3) xxR X indicates lens colour. R =Red, A =Amber, B =Blue Intelligent wall mounted sounder strobe with short circuit isolator. Note: 1. Meets the requirements of EN54-3 for all tones and output levels at voltage range 1528v Intelligent wall mounted sounder strobe. Meets the requirements of EN54-3 for all tones and output levels at voltage range 15-32 VDC Intelligent integrated detector base sounder strobe Meets the requirements of EN54-3 for all tones and output levels at voltage range 15-32 VDC with the exception of Tones 4, 10, 11, 17 and 20 which are approved at maximum volume only. Intelligent integrated detector base sounder strobe with short circuit isolator Note: 1. Meets the requirements of EN54-3 for all tones at voltage range 15-28v with the exception of Tones 4,10,11,17 and 20, which are approved at maximum volume only EMA1224B4R-D 4 Tone Type A conventional wall mounting sounder, red Note: Meets the requirements of EN 54-3 at all output levels, and voltage ranges of 10-14 VDC and 19.5-28 VDC for the following tones: 1 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence 2 - 800Hz continuous 3 - 500Hz-1200Hz slow whoop 4 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence 4 Tone Type A conventional wall mounting sounder, white Note: Meets the requirements of EN 54-3 at all output levels, and voltage ranges of 10-14 VDC and 19.5-28 VDC for the following tones: 1 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence 2 - 800Hz continuous 3 - 500Hz-1200Hz slow whoop 4 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence 4 Tone Type A conventional ceiling mounting sounder, white Note: Meets the requirements of EN 54-3 at all output levels, and voltage ranges of 10-14 VDC and 19.5-28 VDC for the following tones: 1 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence 2 - 800Hz continuous 3 - 500Hz-1200Hz slow whoop 4 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence 166c/37 LPCB Ref. No.
EMA24Fxxxx
166c/32
SST-xxWx-14
166c/33
SST-xxRx-14
166c/34
WMSST-RR-P30
166d/07
WMSST-RR-P29 IBSST-DR-P29
166c/35 166c/36
IBSST-DR-P30
166d/08
EMA1224B4W-D
166c/38
DBS1224B4W-D
166c/40
348
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Bases: ELPBR/W Low profile base IP21C, red or white ESBR/W Standard base IP54, red or white ESBRS/WS Standard base and IP66 sealing kit, red or white
Certificate No: 166c to EN 54-3: 2001 Certificate No: 166d to EN 54-3: 2001 and CEA GEI 1-052 Draft 2.0: 11.06.97 Certificated Products MI-WSDB-X-XX Intelligent wall mounted sounder strobe Notes: 1) x-xx indicates body colour. R=Red, W=Detector White 2) x-xx indicate lens colour. RD=Red, AM=Amber, GR=Green, BL=Blue, CL=Clear Intelligent wall mounted sounder Note: 1) x indicates body colour. R=Red, W=Detector White Intelligent integrated detector base sounder strobe Notes: 1) x-xx indicates body colour. R=Red, W=Detector White, PW=Pure White, B=Black 2) x-xx indicate lens colour. RD=Red, AM=Amber, GR=Green, BL=Blue, CL=Clear Intelligent integrated detector base sounder Note: 1) x indicates body colour. R=Red, W=Detector White, PW=Pure White, B=Black Intelligent wall mounted sounder strobe with short circuit isolator Notes: 1) x-xx indicates body colour. R=Red, W=Detector White 2) x-xx indicate lens colour. RD=Red, AM=Amber, GR=Green, BL=Blue, CL=Clear Intelligent wall mounted sounder with short circuit isolator Note: 1) x indicates body colour. R=Red, W=Detector White Intelligent integrated detector base sounder strobe with short circuit isolator Notes: 1) x-xx indicates body colour. R=Red, W=Detector White, PW=Pure White, B=Black 2) x-xx indicate lens colour. RD=Red, AM=Amber, GR=Green, BL=Blue, CL=Clear Intelligent integrated detector base sounder with short circuit Note: 1) x indicates body colour. R=Red, W=Detector White, PW=Pure White, B=Black LPCB Ref. No. 166c/09
MI-WSD-X MI-IBSDB-X-XX
166c/10 166c/11
MI-IBSD-X MI-WSDB-X-XX-I
166c/12 166d/01
MI-WSD-X-1 MI-IBSDB-X-XX-I
166d/02 166d/03
MI-IBSD-X-I
166d/04
12 Sep 2011
349
PART 1: SECTION 7
ALARM WARNING DEVICES
Notifier by Honeywell
Charles Avenue, Burgess Hill, West Sussex RH15 9UF, United Kingdom Tel: +44 (0)1444 230230 Fax: +44 (0)1444 230689 E-mail: sales@notifierfiresystems.co.uk Website: www.notifierfiresystems.co.uk
Certificate No: 166c to EN 54-3: 2001 + A1:2002 + A2:2006 Certificate No: 166d to EN 54-3: 2001 and CEA GEI 1-052 Draft 2.0: 11.06.97 Certificated Products NS4/R 4 Tone wall mounting conventional sounder (red) Note: 1) Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 10-14v and 21-27v 4 Tone wall mounting conventional sounder (white) Note: 1) Meets the requirements of EN54-3 for all tones and output levels at voltage ranges 10-14v and 21-27v Intelligent wall mounted sounder strobe Notes: 1) x/x indicates body colour. R=Red, W=Detector White 2) x/x indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=Clear Intelligent wall mounted sounder Note: 1) x indicates body colour. R=Red, W=Detector White Intelligent integrated detector base sounder strobe Notes: 1) x/x indicates body colour. R=Red, W=Detector White, PW=Pure White, B=Black 2) x/x indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=Clear Intelligent integrated detector base sounder Note: 1) x indicates body colour. R=Red, W=Detector White, PW=Pure White, B=Black 4 Tone Type A conventional wall mounting sounder, red Note: Meets the requirements of EN 54-3 at all output levels, and voltage ranges of 10-14 VDC and 19.5-28 VDC for the following tones: 1 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence 2 - 800Hz continuous 3 - 500Hz-1200Hz slow whoop 4 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence 4 Tone Type A conventional wall mounting sounder, white Note: Meets the requirements of EN 54-3 at all output levels, and voltage ranges of 10-14 VDC and 19.5-28 VDC for the following tones: 1 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence 2 - 800Hz continuous 3 - 500Hz-1200Hz slow whoop 4 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence 4 Tone Type A conventional ceiling mounting sounder, white Note: Meets the requirements of EN 54-3 at all output levels, and voltage ranges of 10-14 VDC and 19.5-28 VDC for the following tones: 1 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence 2 - 800Hz continuous 3 - 500Hz-1200Hz slow whoop 4 - Falling 1200Hz-500Hz over 3.5s followed by 0.5s silence Intelligent wall mounted sounder strobe with short circuit isolator Notes: 1) x/x indicates body colour. R=Red, W=Detector White 2) x/x indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=Clear Intelligent wall mounted sounder with short circuit isolator Note: 1) x indicates body colour. R=Red, W=Detector White Intelligent integrated detector base sounder strobe with short circuit isolator Notes: 1) x/x indicates body colour. R=Red, W=Detector White, PW=Pure White, B=Black LPCB Ref. No. 166c/01
NSR4/W
166c/02
AWSB32/X/X
166c/09
AWS32/X ABSB32/X/X
166c/10 166c/11
ABS32/X NS3D/R
166c/12 166c/37
NS3D/W
166c/38
NBS3D
166c/40
AWSB32/X/X-I
166d/01
AWS32/X-I ABSB32/X/X-I
166d/02 166d/03
350
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products ABS32/X-I 2) x/x indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=Clear Intelligent integrated detector base sounder with short circuit isolator Note: 1) x indicates body colour. R=Red, W=Detector White, PW=Pure White, B=Black LPCB Ref. No. 166d/04
OG Elektronik
Sanayi Mah., 636 Sok., Erol Apt. 11/3, Antalya, Turkey Tel: +9 0242 344 2500 Fax: +9 0242 344 2120 E-mail: info@og.com.tr; ahmet@og.com.tr Website: www.og.com.tr
Certificate No: 928g-(cl-1) to 54-3: 2001 + A1: 2002 and EN 54 -17: 2005 Certificated Products FF LS200 Analogue addressable Type A sounder with short circuit isolator Notes 1. Meets the requirements of EN 54-3 at the following tone settings: Dual tone 990 to 650Hz, 2Hz (250ms-250ms) Pulsed tone 990Hz, 1Hz (500ms ON 500ms OFF Continuous tone 990Hz, steady LPCB Ref. No. 928g/01
6000/SSW2
201n/02
6000/SSR2/NL
201n/03
6000/SSW2/NL
201n/04
12 Sep 2011
351
PART 1: SECTION 7
ALARM WARNING DEVICES
S-C481
548e/01
Sounders
Certificated Products FDS229-R Analogue addressable sounder beacon (Red) with short circuit isolator (FDB221, FDB221-AA, FDB291 and FDB293) 1) Meets the requirements of EN 54-3 at the following tones: Continuous 970Hz 1s Intermittent 950Hz 1s Sweep-down 1200Hz-500Hz 3.5s Slow-whoop sweep-up, 0.5s linear 500Hz-1200Hz Pulse-tone 150ms on 100ms off 500Hz Intermittent 150ms on 600ms off 500Hz Continuous 500Hz Alternating 0.1s on 0.4s off 560Hz/440Hz Intermittent 600ms on 650ms off 420Hz 3.75s Slow-whoop sweep-up, 0.25s linear 500Hz-1200Hz Intermittent 0.5s on 0.5s off 1s pause 970Hz Analogue addressable sounder beacon (Amber) with short circuit isolator (FDB221, FDB221-AA, FDB291 and FDB293) 1) Meets the requirements of EN 54-3 at the following tones: Continuous 970Hz 1s Intermittent 950Hz 1s Sweep-down 1200Hz-500Hz 3.5s Slow-whoop sweep-up, 0.5s linear 500Hz-1200Hz Pulse-tone 150ms on 100ms off 500Hz Intermittent 150ms on 600ms off 500Hz Continuous 500Hz Alternating 0.1s on 0.4s off 560Hz/440Hz Intermittent 600ms on 650ms off 420Hz 3.75s Slow-whoop sweep-up, 0.25s linear 500Hz-1200Hz Intermittent 0.5s on 0.5s off 1s pause 970Hz Analogue addressable Type A base sounder LPCB Ref. No. 126ar/01
FDS229-A
126ar/02
DBS720
531g/01
Notes: 1) Meets the requirements of EN 54-3 with the following tones: Tone 1 Continuous 970Hz Tone 2 Intermittent 950Hz; 1s on,1s off
352
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products Tone 3 Sweep down 1200Hz?500Hz at 1Hz Tone 4 Slow whoop 500Hz?1200Hz over 3.5s, 0.5s off Tone 5 Pulse tone 500Hz; 0.15s on, 0.1s off Tone 6 Intermittent 500Hz; 0.15s on, 0.6s off Tone 7 Continuous 500Hz Tone 8 Alternating 560Hz 0.1s/440Hz 0.4s Tone 9 Intermittent 420Hz; 0.6s on, 0.65s off Tone 10 Slow whoop - 500?1200Hz over 3.75s, 0.25s off Tone 11 Intermittent 970Hz; 3 pulses 0.5s on, 0.5s off repeated after 1.5s 2) Approved only when used with detector devices OP720, OH720, HI720 or HI722 LPCB Ref. No.
Accessories: FDB221 FDB221-AA FDB291 FDB293 detector base detector base, addressed with 2 micro-terminals base attachment base attachment wet
WMSOU-XX-P01
166c/10
IBSST-XX-P01
166c/11
12 Sep 2011
353
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products 2) xx indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=Clear Meets the requirements of EN54-3 for all tones at voltage range 15-32v with the exception of Tones 4, 10, 11, 17 and 20 which are approved at maximum volume only. Intelligent integrated detector base sounder Note: 1) xx indicates body colour. RR=Red, WW=Bright White, DD=Detector White, KK=Black Intelligent non-integrated detector base sounder strobe Notes: 1) xx indicates body colour. R=Red, W=Bright White 2) xx indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=Clear Intelligent non-integrated detector base sounder Note: 1) xx indicates body colour. RR=Red, WW=Bright White Meets the requirements of EN54-3 for all tones at voltage range 15-32v with the exception of Tones 4, 10, 11, 17 and 20 which are approved at maximum volume only. Intelligent wall mounted sounder strobe with short circuit isolator Notes: 1) xx indicates body colour. R=Red, W=Bright White 2) xx indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=Clear Meets the requirements of EN54-3 for all tones and output levels at voltage range 1532v. Intelligent wall mounted sounder with short circuit isolator Note: 1) xx indicates body colour. RR=Red, WW=Bright White. Meets the requirements of EN54-3 for all tones and output levels at voltage range 1532v. Intelligent integrated detector base sounder strobe with short circuit isolator Notes: 1) xx indicates body colour. R=Red, W=Bright White, D=Detector White, K=Black 2) xx indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=Clear Meets the requirements of EN-54-3 for all tones at voltage range 15-32v with the exception of Tones 4, 10, 11, 17 and 20, which are approved at maximum volume only. Intelligent integrated detector base sounder with short circuit isolator Note: 1) xx indicates body colour. RR=Red, WW=Bright White, DD=Detector White, KK=Black Meets the requirements of EN-54-3 for all tones at voltage range 15-32v with the exception of Tones 4, 10, 11, 17 and 20, which are approved at maximum volume only. Intelligent non-integrated detector base sounder strobe with short circuit isolator Notes: 1) xx indicates body colour. R=Red, W=Bright White 2) xx indicates lens colour. R=Red, A=Amber, G=Green, B=Blue, C=Clear Meets the requirements of EN-54-3 for all tones at voltage range 15-32v with the exception of Tones 4, 10, 11, 17 and 20, which are approved at maximum volume only. Intelligent non-integrated detector base sounder with short circuit isolator Note: 1) xx indicates body colour. RR=Red, WW=Bright White Meets the requirements of EN-54-3 for all tones at voltage range 15-32v with the exception of Tones 4, 10, 11, 17 and 20, which are approved at maximum volume only. Intelligent wall mounted sounder strobe Note: 1) Meets the requirements of EN54-3 for all tones and output levels at voltage range 15-28v. Intelligent integrated detector base sounder strobe. Notes: 1) Meets the requirements of EN54-3 for all tones at voltage range 15-32v with the exception of Tones 4, 10, 11, 17 and 20, which are approved at maximum volume only. Intelligent wall mounted sounder strobe Meets the requirements of EN54-3 for all tones and output levels at voltage range 1532v. Intelligent integrated detector base sounder strobe. Meets the requirements of EN54-3 for all tones at voltage range 15-32v with the exception of Tones 4, 10, 11, 17 and 20 which are approved at maximum volume only. LPCB Ref. No.
IBSOU-XX-P01 DBSST-XX-P01-C
166c/12 166c/13
DBSOU-XX-P01-C
166c/14
WMSST-XX-P02
166d/01
WMSOU-XX-P02
166d/02
IBSST-XX-P02
166d/03
IBSOU-XX-P02
166d/04
DBSST-XX-P02-C
166d/05
DBSOU-XX-P02-C
166d/06
WMSST-RP-P30
166d/07
IBSST-DR-P30
166d/08
WMSST-RR-P29 IBSST-DR-P29
166c/35 166c/36
354
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Teledata S.r.l.
Via Giulietti 8, Milan 20132, Italy Tel: +39 02-27201352 Fax: +39 02-2593704 E-mail: info@teledata-i.com Website: www.teledate-i.com
Certificate No: 928g-(cl-6) to EN 54-3: 2001 + A1: 2002 + A2: 2006 and EN 54-17: 2005 Certificated Products FDS100 Analogue addressable Type A sounder with short circuit isolator Notes: 1) Meets the requirements of EN 54-3 at the following tone settings: Dual tone: 990 and 650Hz, 2Hz (250ms-250ms) Pulsed tone: 990Hz, 1Hz (500ms ON - 500ms OFF) Continuous tone: 990Hz, steady LPCB Ref. No. 928g/01
Texecom Ltd
Bradwood Court, St Crispin Way, Haslingden, Lancashire BB4 4PW, United Kingdom Tel: +44 (0)1706 220460 Fax: +44 (0)1706 230692 E-mail: sales@texe.com Website: http://www.texe.com
Certificate No: 717a to EN 54-3: 2001 + A1: 2002 + A2: 2006 Certificated Products PSS-0068 Conventional Sounder with LED Strobe (Red Head / Red Base) (PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases) Notes: 1. The above sounder is Type A when used the with the shallow base & Type B when used with the deep base only 2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 Conventional Sounder with LED Strobe (Red Head / White Base) PSO-0003 & PSO-0007 bases) Notes: 1. The above sounder is Type A when used the with the shallow base & Type B when used with the deep base only 2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 Conventional Sounder with LED Strobe (Amber Head / Red Base) PSO-0003 & PSO-0007 bases) Notes: 1. The above sounder is Type A when used the with the shallow base & Type B when used with the deep base only 2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 Conventional Sounder with LED Strobe (Amber Head / White Base) (PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases) Notes: 1. The above sounder is Type A when used the with the shallow base & Type B when used with the deep base only 2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 Conventional Sounder (Red) (PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases) Notes: 1. The above sounder is Type A when used the with the shallow base & Type B when used with the deep base only 2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 Conventional Sounder (White) (PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases) LPCB Ref. No. 717a/01
PSS-0079
717a/02
PSS-0073
717a/03
PSS-0080
717a/04
PSS-0084
717a/05
PSS-0089
717a/06
12 Sep 2011
355
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products Notes: 1. 2. PBS-0003 LPCB Ref. No. The above sounder is Type A when used the with the shallow base & Type B when used with the deep base only Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 717a/07
PBS-0009
Universal base sounder (Cream) Notes: 1. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 Conventional Sounder with LED Strobe Common Operation (Red Head / Red Base) (PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases) Notes: 1. The above sounder is Type A when used the with the shallow base & Type B when used with the deep base only 2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 Conventional Sounder with Red LED Strobe Common Operation (Clear Lens / White Base) (PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases) Notes: 1. The above sounder is Type A when used the with the shallow base & Type B when used with the deep base only 2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 Conventional Sounder with LED Strobe Common Operation (Amber Head / Red Base) (PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases) Notes: 1. The above sounder is Type A when used the with the shallow base & Type B when used with the deep base only 2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 Conventional Sounder with Red LED Strobe (Clear Lens / White Base) (PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases) Notes: 1. The above sounder is Type A when used the with the shallow base & Type B when used with the deep base only 2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 Universal base sounder (Red) Notes: 1. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 Conventional Sounder with LED Strobe Common Operation (Red Head / White Base) (PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases) Notes: 1. The above sounder is Type A when used the with the shallow base & Type B when used with the deep base only 2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13 Conventional Sounder with LED Strobe Common Operation (Amber Head / White Base) (PSO-0001, PSO-0006, PSO-0003 & PSO-0007 bases) Notes: 1. The above sounder is Type A when used the with the shallow base & Type B when used with the deep base only 2. Meets the requirements of EN 54-3:2001 at tones 1,2,3,6,7 & 13
PSC-0045
717a/10
PSC-0051
717a/11
PSC-0054
717a/12
PSC-0055
717a/13
PBS-0015
717a/14
PSC-0062
717a/16
PSC-0063
717a/17
Bases:
356
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
PSO-0001 Shallow base (red) PSO-0006 Shallow base (white) PSO-0003 Deep base (red) PSO-0007 Deep base (white)
601SB
681g/02
601SBD
681g/03
602SB
681g/04
602SBD
681g/05
901SB
681g/06
912SB
681g/07
812SB
681g/08
LPSY800-R LPSY800-W
378e/01 378e/02
12 Sep 2011
357
PART 1: SECTION 7
ALARM WARNING DEVICES
Certificated Products Notes: 1. Meets the requirements of EN 54-3 at tones 1, 2, 6, 9. Symphoni MX addressable loop powered Type B sounder (red) with short circuit isolator Notes: 1. Meets the requirements of EN 54-3 at tones 1, 2, 6, 9. Symphoni MX addressable loop powered Type A sounder beacon (red) with short circuit isolator Notes: 1. Meets the requirements of EN 54-3 at tones 1, 2, 6, 9. Symphoni MX addressable loop powered Type A sounder beacon (white) with short circuit isolator Notes: 1. Meets the requirements of EN 54-3 at tones 1, 2, 6, 9. Symphoni MX addressable loop powered Type B sounder beacon (red) with short circuit isolator Notes: 1. Meets the requirements of EN 54-3 at tones 1, 2, 6, 9. LPCB Ref. No. 378e/03 378e/04
LPSY865 LPAV800-R
LPAV800-W
378e/05
LPAV865
378e/06
G1x-HDVM-E
262w/03
Ancillaries G1B-MP Back box G1 series, white 27193-16 Back box, surface white
358
12 Sep 2011
PART 1: SECTION 7
ALARM WARNING DEVICES
Vimpex Limited
Star Lane, Great Wakering, Essex SS3 0PJ, United Kingdom Tel: +44 (0) 1702 216999 Fax: +44 (0) 1702 216699 E-mail: sales@vimpex.co.uk Website: www.vimpex.co.uk
Certificate No: 692a to EN 54-3: 2001 Certificated Products MBF-6EV-24 MBF-8EV MBA-6 + BBX.4 MBA-8 + BBX.4 6" (150mm) 24Vdc fire alarm bell with aluminium gong 8" (200mm) 24Vdc fire alarm bell with aluminium gong 6" (150mm) fire alarm bell with aluminium gong complete with back box 8" (200mm) fire alarm bell with aluminium gong complete with back box LPCB Ref. No. 692a/01 692a/02 692a/04 692a/05
12 Sep 2011
359
PART 1: SECTION 8
FIRE RESISTANT CABLES This section lists fire resistant cables for use in fire safety, fire detection and fire alarm systems and other applications where specifications require cables with specific performance in the event of a fire. BS 5839-1:2002+A2:2008 Fire detection and fire alarm systems for buildings. Code of practice for system design, installation, commissioning and maintenance BS 5839-1:2002+A2:2008 includes requirements for fire resistant cables for fire detection and alarm systems. It calls for Standard and Enhanced fire resistant cables and defines the requirements for these in Clause 26.2. These cables have to comply with BS EN 60702-1 (with a polymeric sheath), BS 7629 or BS 7846, and:Standard fire resisting cables also have to: a) achieve Class PH30 when tested in accordance with EN 50200:2006. and b) maintain circuit integrity when exposed to a special flame / mechanical shock / water spray sequence equivalent to achieving a duration of 30 minutes when tested in accordance with BS EN 50200:2006 Annex E. - Enhanced fire resisting cables also have to: a) achieve a 120 minute survival when tested in accordance with EN 50200:2006. and b) maintain circuit integrity when exposed to a special flame / mechanical shock / water spray sequence equivalent to achieving a duration of 120 minutes when tested in accordance with BS 8434-2:2003+A2:2009. Cables complying with these requirements are listed as Standard or Enhanced under BS 5839-1, Clause 26.2. Building Regulations 2000 - Fire Safety - Approved Document B The Building Regulations 2000 - Fire Safety - Approved Document B - Volume 2 - Buildings other than dwelling houses (Amended 2007) defines a protected power circuit to be able to continue to function during a fire. A protected circuit for operation of equipment in the event of fire should consist of a cable meeting at least the requirements of PH30 when tested in accordance with EN 50200. Larger or complex buildings may require fire protection systems to operate for extended periods during fire and guidance on such systems is given in BS 5839-1, BS 5266-1 and BS 7346-6. Additional provisions for applications not covered by the above may be given in BS 8519:2010. Other Standards Used The other standards and test methods currently used for certification are listed below. This list includes some "withdrawn" standards. Where possible, these will be replaced by the superseding standards when certificates are renewed. However, where withdrawn standards are called up by current standards, certification to the withdrawn standard may need to be maintained until the calling standard is amended to remove the reference: - BS 6207-1:1995 Mineral insulated cables with rated voltage not exceeding 750V - BS 6387:1994 Performance requirements for cables required to maintain circuit integrity under fire conditions - BS 6425-1:1990 Gases evolved during combustion of electric cables. Part 1: Method for determination of amount of halogen acid gas evolved during combustion of polymeric materials taken from cables - BS 7346-6:2005 Components for smoke and heat control systems - Part 6: Specification for cable systems - BS 7622-2:1993 Measurement of smoke density of electric cables burning under defined conditions - BS 7629-1:1997 Thermosetting insulated cables with limited circuit integrity when affected by fire. Part 1: Multicore cables. - BS 7629-1:1997 (Incorporating Amendment Nos.1 and 2) Thermosetting insulated cables with limited circuit integrity when affected by fire. Part 1: Multicore cables (The provisions introduced by amendment No.1: 2004 are effective from 1st April 2004) - BS 7629-1:2008 Electric cables - Specification for 300/500 V fire resistant screened cables having low emission of smoke and corrosive gases when affected by fire Part 1: Multicore and multipair cables - BS 7846:2000 Electric cables 600/1000V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire.
360
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES - BS 7846:2000 (Incorporating Amendment No.1) Electric cables 600/1000V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire. (The provisions introduced by amendment No.1: 2004 are affective from 1st April 2004) - BS 7846:2000 (Incorporating Amendment Nos.1 and 2) Electric cables 600/1000V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire. - BS 7846:2009 Electric cables - Thermosetting insulated, armoured, fire - resistant cables of rated voltage 600/1 000 V, having low emission of smoke and corrosive gases when affected by fire - Specification - BS 8434-1:2003 Method of test for assessment of the fire integrity of electric cables - Part 1: test for unprotected small cables for use in emergency circuits - BS EN 50200 with addition of water spray - BS 8434-2:2003+A2:2009 Method of test for assessment of the fire integrity of electric cables - Part 2: test for unprotected small cables for use in emergency circuits- BS EN 50200 with a 930C flame and with water spray - BS 8491:2008 Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and other certain active fire safety systems - BS 8519:2010 Selection and installation of fire-resistant power and control cable systems for life safety and fire-fighting applications - Code of practice - EN 50200:2000 Method of test for resistance to fire of unprotected small cables for use in emergency circuits - EN 50200:2006 Method of test for resistance to fire of unprotected small cables for use in emergency circuits - EN 50266:2001 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically mounted bunched wires or cables - EN 50267-2-1:1999 Common test method for cables under fire conditions- tests on gases evolved during combustion of materials from cables - procedures - Determination of the amount of halogen acid gas - EN 50267-2-3:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedure 2-3: Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity - EN 50268-2:2000 Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions - EN 60332-3:2009 Tests on electric and optical fibre cables under fire conditions - Part 3: Test for vertical flame spread of vertically mounted bunched wires or cables - EN 60702-1:2002 Mineral insulated cables and their terminations with rated voltage not exceeding 750V - EN 61034-2: 2005 Measurement of smoke density of cables burning under defined conditions - IEC 331:1970 Fire resisting characteristics of electric cables - IEC 60754-1:1994 Tests on gases evolved during combustion of materials from cables - Part 1: Determination of the amount of halogen acid gas - IEC 60754-2:1991 Tests on gases evolved during combustion of electric cables - Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity - IEC 60331-21:1999 Tests for electric cables under fire conditions - Circuit integrity - Part 21 Procedure and requirements - Cables of rated voltage up to and including 0,6/1,0kV - IEC 60331-23:1999 Tests for electric cables under fire conditions - Circuit integrity - Part 23 Procedure and requirements - Electric data cables - IEC 60331-25:1999 Tests for electric cables under fire conditions - Circuit integrity - Part 25 Procedure and requirements - Optical fibre cables - IEC 60331-31:1999 Tests for electric cables under fire conditions - Circuit integrity - Part 31 Procedure and requirements for fire with shock - Cables of rated voltage up to and including 0,6/1,0kV - IEC 60332-3:2000 Tests on electric cables under fire conditions - Part 3: Tests on bunched wires or cables - IEC 61034-2:2005 Measurement of smoke density of cables burning under defined conditions Notes: 1) The rated voltages Uo/U recognised for BS 6387:1994 are, 300/500V and 450/750V, and for BS 7629 are 300/500V, where Uo is the power-frequency voltage to earth and U is the power-frequency voltage between conductors. 2) Testing of single core cable to BS 6387:1994 is not recognised by the standard. This is because it requires the cable to have at least two metallic elements. Therefore LPCB approval of single core cable is based on the cable being tested in a stainless steel conduit. 3) MICC Cables approved to BS 5839-1:2002+A2:2008 Clause 26.2 must be sheathed with an overall polymeric covering.
12 Sep 2011
361
PART 1: SECTION 8
FIRE RESISTANT CABLES 4) BS EN 50200:2006 Annex E and BS 8434-2:2003+A2:2009 provide methods of test that meet the requirements for a special flame / mechanical shock / water spray sequences described in BS 58391:2002+A2:2008, Clause 26.2 d) and e), respectively.
362
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
NoBurn Platinum
Nominal csa of conductor (mm2) 1.0(1) 1.5(1) 2.5(1) 4.0(2) Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2 BS 7629-1 (Incorporating Amendments No.1 & 2) Complies(3) Complies(3) Complies(3) Complies(3) BS EN 50200 Class PH120 Class PH120 Class PH120 Class PH120 BS 84341 30min(4) 30min(4) 30min(4) 30min(4) BS 5839-1 Clause 26.2 Standard(5) Standard(5) Standard(5) Standard(5) LPCB Ref. No. 682a/01
Uo/U 300/500V Notes: 1) Solid conductor only. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1:1997 (Incorporating Amendments Nos.1 and 2), the NoBurn Platinum cables listed met the requirements of smoke density of BS EN 50268-2:2000, fire resistance requirements CWZ in Clause 11 of BS 6387:1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-21:1999. 4) The duration of 30min when tested in accordance with BS 8434-1:2003 is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase as described in Clause 26.2d of BS 5839-1:2002. 5) The NoBurn Platinum cables listed conform to BS 7629-1:1997 (Incorporating Amendments Nos.1 and 2), met Class PH120 when tested in accordance with BS EN 50200:2006 and met the 30min duration when tested in accordance with BS 8434-1:2003 and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1:2002.
12 Sep 2011
363
PART 1: SECTION 8
FIRE RESISTANT CABLES
Certificate No: 221c to BS 6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999
Core Construction (excluding drain wire and earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4
BS 7629-1
Complies(3) Complies
(3)
4.0(2)
Complies(3)
30min(4)
Standard(5)
Uo/U 300/500V Notes: 1) Solid conductor only. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1: 2008, the Firetec Standard Multicore LSZH cables listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on the insulation, binder tape & outer covering when tested in accordance with BS EN 50267-2-1: 1999.
364
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
4) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase. 5) The Firetec Standard Multicore LSZH cables listed conform to BS 7629-1: 2008, met class PH120 when tested in accordance with BS EN 50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.
Certificate No: 221f to BS 7629-1: 2008, BS 5839-1: 2002+A2:2008 Clause 26.2e, BS EN 50200: 2006 Class PH120 and BS 8434-2: 2003+A2:2009 120min
12 Sep 2011
365
PART 1: SECTION 8
FIRE RESISTANT CABLES
Nominal csa of conductor (mm2) 120 150 185 240 300 400 Uo 750V Notes: 1) The above range is certified in both Bare and Served constructions. 2) For cables with an outside diameter in excess of 20mm, the category Z tests were conducted in accordance with guidance from the manufacturer. Certificate No: 221h to BS 6387: 1994 and BS EN 60702-1: 2002 Core Construction One One One One One One BS 6387 C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z BS EN 60702-1 Complies Complies Complies Complies Complies Complies LPCB Ref. No.
Notes: 1) The above range is certified in both bare and served constructions. 2) For cables with an outside diameter in excess of 20mm, the category Z tests were conducted in accordance with guidance from the manufacturer. Certificate No: 221j to BS 7846: 2009
366
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES Firetec Armoured
Nominal csa of conductor (mm2) 1.5 2.5 4.0 6.0 10 16 Uo/U 600/1000V Notes: 1) Stranded conductors only. 2) In meeting the requirements of BS 7846: 2009 Category F2, the Firetec Armoured cables listed met the requirements for fire resistance characteristics Category CWZ specified in Clause 11 of BS 6387: 1994. Core Construction (see note 1) 2, 3, 4, 5, 7, 12, 19, 27, 37 & 48 2, 3, 4, 5, 7, 12, 19, 27, 37 & 48 2, 3, 4, 5, 7, 12, 19, 27, 37 & 48 2, 3, 4 & 5 2, 3, 4 & 5 2, 3, 4 & 5 BS 7846 F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) LPCB Ref. No. 221k/01
BS EN 502672-1 (outer covering) <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl
4.0(1,2)
Enhanced(4)
Uo/U 300/500V Notes: 1) 2) 3) 4) Solid conductor only. The above cables are certified in Served construction only. In meeting the requirements of BS EN 60702-1: 2002, the AEI MI CABLE (LIGHT DUTY) listed met the requirements of smoke density of IEC 61034-2: 2005 and also met the requirements of pH & conductivity when tested in accordance with IEC 60754-2-am1: 1997. The AEI MI CABLE (LIGHT DUTY) listed conform to BS EN 60702-1: 2002, met Class PH120 when tested in accordance with BS EN 50200:2006 and met a duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for an Enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.
12 Sep 2011
367
PART 1: SECTION 8
FIRE RESISTANT CABLES
ALPHAFIRE FPC4
Nominal csa of conductors (mm2) 1.0(1) 1.5(1) 2.5(1) 4.0(2) Uo/U 300/500 V Notes: 1) Solid and stranded conductors. 2) Stranded conductor only. Core Construction 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 6387 C, W, Z C, W, Z C, W, Z C, W, Z BS EN 50267-2-1 (outer covering) <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl LPCB Ref. No. 568a/01
Certificate No: 576a to BS 6387: 1994, BS EN 50267-2-1: 1999 and BS EN 50268-2: 2000
368
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES 450/750V Low smoke halogen free fire resistant cable
Nominal csa of conductor (mm2) 1.5 2.5 4.0 6.0 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 Uo/U 450/750V Notes: 1) Clause 8 (Bending) and 9.1 & 9.2 (Impact) can not be conducted due to the cable having only one core. 2) Where a single cable is fitted in a conduit, only phase to earth voltage was applied. 3) To satisfy the requirement of BS 6387, testing for C, W & Z categories were conducted using a 20mm stainless steel conduit as the other metallic element. Certificate No: 576a to BS 6387: 1994, BS EN 50267-2-1: 1999 and BS EN 50268-2: 2000 Core Construction (see note 1) One (3) One (3) One (3) One (3) One (2,3) One (2,3) One (2,3) One (2,3) One (2,3) One (2,3) One (2,3) One (2,3) One One One One One One One BS 6387 C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z BS EN 50267-2-1 (outer covering) <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl BS EN 50268-2 >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% LPCB Ref. No. 576a/01
12 Sep 2011
369
PART 1: SECTION 8
FIRE RESISTANT CABLES
Cavicel SpA
Via Caduti del Lavoro, 18/A, 20096 Pioltello, Milan, Italy Tel: +39 02 9216 0521 Fax: +39 02 9216 0753 E-mail: cavicel@cavicel.com Website: www.cavicel.com
Certificate No: 217d to BS 6387:1994, BS EN 50267-2-1:1999
FIRECEL SR 112
Nominal csa of conductor (mm2) 1.5 2.5 4.0 6.0 10 16 25 Uo/U 450/750 V Notes: 1. 2. 3. 4. 5. Stranded conductor only. Clause 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core. To satisfy the requirement of BS 6387, testing for C, W and Z categories was conducted using a 20mm steel conduit as the other metallic element. For large size cables, the category C testing was conducted using a 38mm steel conduit as the other metallic element. Where a single cable is fitted in a conduit, only phase to earth voltage was applied. Core Construction (see note 1) One One One One One One One BS 6387 (see notes 2, 3, 4 & 5) C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z BS EN 50267-2-1 (outer covering) <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI LPCB Ref. No. 217d/01
C, W, Z C, W, Z C, W, Z C, W, Z
Class PH30 Class PH30 & PH60 Class PH30 & PH60 Class PH30 & PH60
217f/01
Uo/U 300/500V Notes: 1. 2. 3. 4. Solid conductor only. Solid & Stranded conductors. Stranded conductor only. In meeting the requirements of BS 7629-1: 2008, the FIRECEL SR 114H cables listed met the requirements of smoke density of BS EN 61034-2: 2005 and achieved less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999. 5. The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase. 6. The FIRECEL SR 114H cables listed conform to BS 7629-1: 2008, met Class PH30 when tested in accordance with BS EN 50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.
370
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES FIRECEL SR 114E Fire Resistant Cable
Nominal csa of conductor (mm2) 1.0(1) 1.5(2) 2.5(2) 4.0(3) Uo/U 300/500V Notes: 1. 2. 3. 4. Solid conductor only. Solid & Stranded conductors. Stranded conductor only. In meeting the requirements of BS 7629-1: 2008, the FIRECEL SR 114E cables listed met the requirements of smoke density of BS EN 61034-2: 2005 and achieved less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999. 5. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase. 6. The FIRECEL SR 114E cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008. Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 BS 6387 BS EN 50200 BS 8434-2 BS 5839-1 Clause 26.2 Enhanced(6) Enhanced(6) Enhanced(6) Enhanced(6) LPCB Ref. No.
C, W ,Z C, W, Z C, W, Z C, W, Z
217g/01
FIRECEL MI 900 L
Nominal csa of conductor (mm 2) 1.0 1.5 2.5 4.0 Uo/U 300/500 V Note 1: The above range is certified in both Bare and Served constructions. Core Construction 2, 3, 4 & 7 2, 3, 4 & 7 2, 3, 4 & 7 2 BS 6387 C,W,Z C,W,Z C,W,Z C,W,Z BS EN 60702-1 Complies Complies Complies Complies LPCB Ref. No. 217h/01
FIRECEL MI 901 H
Nominal csa of conductor (mm 2) 1.5 2.5 4.0 6.0 10 16 25 35 50 70 95 120 150 185 240 300 400 Uo 750V Note 1: The above range is certified in both Bare and Served constructions. Core construction One One One One One One One One One One One One One One One One One BS 6387 C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z BS EN 60702-1 Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies LPCB Ref. No. 217h/02
12 Sep 2011
371
PART 1: SECTION 8
FIRE RESISTANT CABLES
Note 2: For cable with an outside diameter in excess of 20mm, the category Z tests were conducted in accordance with guidance from the manufacturer. Certificate No: 217h to BS 6387: 1994 and BS EN 60702-1: 2002
FIRECEL MI 900 H
Nominal csa of conductor (mm 2) 1.5 2.5 4.0 6.0 10 16 25 Uo/U 450/750V Core Construction 2, 3, 4, 7, 12 & 19 2, 3, 4, 7 &12 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 6387 C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z BS EN 60702-1 Complies Complies Complies Complies Complies Complies Complies LPCB Ref. No. 217h/03
Note 1: The above range is certified in both Bare and Served constructions. Note 2: For cable with an outside diameter in excess of 20mm, the category Z tests were conducted in accordance with guidance from the manufacturer.
Context Plus
Nominal csa of conductor (mm 2) 1.0(1) 1.5(1) 2.5(1) 4.0(2) Uo/U 300/500V Notes: 1) Solid conductor only. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1: 2008, the Context Plus cables listed met the requirements of smoke density of BS EN 61034-2: 2005 fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1: 1999. 4) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase. 5) The Context Plus cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1 :2002+A2:2008. Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2 BS 7629-1 BS EN 50200 BS EN 50200 Annex E 30min(4) 30min(4) 30min(4) 30min(4) BS 5839-1 Clause 26.2 Standard(5) Standard(5) Standard(5) Standard(5) LPCB Ref. No.
682a/01
372
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Dtwyler Cables
Unit of Dtwyler Switzerland Inc, Gotthardstrasse 31, CH-6460 Altdorf, Switzerland Tel: +41 41 875 1122 Fax: +41 41 875 1860 E-mail: info.ch@daetwyler-cables.com Website: www.daetwyler-cables.com
Certificate No: 172b to BS 7629-1: 2008, BS EN 50200: 2006 Class PH30, BS EN 50200: 2006 Annex E 30min and BS 5839-1: 2002+A2:2008 Clause 26.2d
Certificate No: 172c to BS 7629-1: 2008, BS 6387: 1994, BS EN 50200: 2006 Class PH120, BS 8434-2: 2003+A2:2009 120min and BS 5839-1: 2002+A2:2008 Clause 26.2e
Complies(2) Complies(2)
C,W,Z C,W,Z
120min(3) 120min(3)
172c/01
Uo/U 300/500V Notes: 1) 2) 3) 4) Solid and stranded conductors. In meeting the requirements of BS 7629-1: 2008, the Pyrofil Enhanced Fire Safety Cables listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1: 1999. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase. The Pyrofil Enhanced Fire Safety Cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 200+A2:2008.
Certificate No: 172d to BS 6387: 1994, BS EN 61034-2: 2005, BS EN 50267-2-1: 1999, IEC 60754-1: 1994, BS EN 50267-2-3: 1999 and IEC 60754-2-am1: 1997
12 Sep 2011
373
PART 1: SECTION 8
FIRE RESISTANT CABLES Pyrofil Fire Safety BS 6387 CWZ
Nominal csa of conductor (mm) 1.5 2.5 Core Construction (see note 1) 2 2 BS 6387 C, W, Z C, W, Z BS EN 50267-2-1 (see note 2) <0.5% HCl <0.5% HCl BS EN 50267-2-3 (see note 3) Complies Complies BS EN 61034-2 >60% >60% LPCB Ref. No. 172d/01
300/500V Solid conductors only. In achieving less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999, the Pyrofil Fire Safety BS 6387 CWZ cables listed also met the requirements of IEC 60754-1: 1994. In achieving a weighted average of pH greater than 4.3 and a weighted average of Conductivity less than 10S/mm on the constituent materials when tested in accordance with BS EN 50267-2-3: 1999, the Pyrofil Fire Safety BS 6387 CWZ cables listed also met the requirements of IEC 60754-2-am1: 1997.
Doncaster Cables
Millfields Industrial Estate, Arksey Lane, Bentley, Doncaster, South Yorkshire DN5 0SJ, United Kingdom Tel: +44 (0)1302 821700 Fax: +44 (0)1302 821701 E-mail: sales@doncastercables.com Website: www.doncastercables.com
Certificate No: 338a to BS 7629-1: 2008, BS 6387: 1994, BS EN 50200: 2006 Class PH30, BS EN 50200: 2006 Annex E & BS 58391: 2002+A2:2008 Clause 26.2d
Firesure Cables
Nominal csa of conductor (mm2) 1.0(1) 1.5
(1)
Core construction (drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4
2.5(2) 4.0(2)
Complies(3) Complies(3)
30min(4) 30min(4)
Standard(5) Standard(5)
Uo/U 300/500V Note 1: Note 2 Note 3: Solid conductor only. Stranded conductor only. In meeting the requirements of BS 7629-1: 2008, the Firesure Cables listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements of CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the (outer covering, binding tape & insulation) when tested in accordance with BS EN 50267-2-1: 1999. The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase as described in Clause 26.2d of BS 5839-1: 2002+A2:2008. The Firesure Cables listed conform to BS 7629-1: 2008, met Class PH30 when tested in accordance with BS EN 50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.
Note 4:
Note 5:
Certificate No: 338b to BS 7629-1: 2008, BS 6387: 1994, IEC 60331-21: 1999, IEC 60332-3-24: 2000+A1:2008, BS EN 50200: 2006 Class PH120, BS 8434-2: 2003+A2:2009 120min and BS 5839-1: 2002+A2:2008 Clause 26.2e
374
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES FIRESURE PLUS
Nominal csa of conductor (mm 2) 1.0 (1) 1.5(1) 2.5(1) 4.0(2) Core construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 BS 6387 IEC 60331-21 IEC 60332-324 Complies Complies Complies Complies BS EN 50200 BS84342 BS 5839-1 LPCB Ref. No.
338b/01
Uo/U 300/500V Note 1: Note 2: Solid conductor only Stranded conductor only
Note 3: In meeting the requirements of BS 7629-1: 2008, the FIRESURE PLUS listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements of CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the (outer covering, binding tape & insulation) when tested in accordance with BS EN 50267-2-1: 1999. Note 4 Note 5: These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950C. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase as described in Clause 26.2e of BS 5839-1: 2002+A2:2008. The FIRESURE PLUS cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met a duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for a enhanced fire resistant cable as described in Clause 26.2e of BS 5839-1: 2002+A2:2008.
Note 6:
Draka UK Limited
Alfreton Road, Derby DE21 4AE, United Kingdom Tel: +44 (0)1332 345431 Fax: +44 (0)1332 331237 E-mail: firetuf@drakauk.com Website: www.drakauk.com
Certificate No: 361b to BS 6387: 1994 and BS EN 50267-2-1: 1999
FTP
Nominal csa of conductor (mm2) 1.5(1) 2.5(1) 4.0(1) 6.0(1) 10(1) 16(1) 25(1) 35(1) 50(1) 70(1) 95(1) 120(1) 150(1) 185(1) 240(1) 300(1) 400(1) Uo/U 600/1000V Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 6387 (see notes 2 & 3) C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z BS EN 50267-2-1 (outer covering) <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI LPCB Ref. No.
361b/01
12 Sep 2011
375
PART 1: SECTION 8
FIRE RESISTANT CABLES
Note 1: Note 2: Note 3: Stranded conductor only. The FTP cable also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387. For cables with an outside diameter in excess of 20mm, the category Z tests were conducted in accordance with guidance from the manufacturer.
361c/01
FT30
Nominal csa of conductor (mm2) 1.5 2.5 4.0 Uo/U 300/500V Notes: 1) In meeting the requirements of BS 7629-1: 2008, the FT30 cables listed met the requirements of smoke density of BS EN 61034-2: 2005 and achieved less than 0.5%HCl on the insulation, binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999. 2) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase. Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 BS 6387 BS EN 50200 BS EN 50200 Annex E 30min (2) 30min (2) 30min (2) BS 5839-1 Clause 26.2 Standard (3) Standard (3) Standard (3) LPCB Ref. No.
C, W, Z C, W, Z C, W, Z
361d/01
376
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
3) The FT30 cables listed conform to BS 7629-1: 2008, met Class PH30 when tested in accordance with BS EN 50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008. Certificate No: 361e to BS 7629-1: 2008, BS 5839-1: 2002+A2:2008 Clause 26.2d, BS EN 50200: 2006 Class PH30 and BS EN 50200: 2006 Annex E
FT EMC
Nominal csa of conductor (mm2) 1.5 2.5 Uo/U 300/500V Notes: 1) In meeting the requirements of BS 7629-1: 2008, the FT EMC cables listed met the requirements of smoke density of BS EN 610342: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the insulation, binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999 . 2) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase. 3) The FT EMC cables listed conform to BS 7629-1: 2008, met Class PH30 when tested in accordance with BS EN 50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008. Certificate No: 361f to BS 7629-1: 2008, BS 6387: 1994, BS 5839-1: 2002+A2:2008 Clause 26.2e, BS EN 50200: 2006 Class PH120 and BS 8434-2: 2003+A2:2009 120min Core Construction (excluding drain wire & earth) 2 2 BS 7629-1 BS EN 50200 BS EN 50200 Annex E 30min(2) 30min(2) BS 5839-1 Clause 26.2 Standard(3) Standard(3) LPCB Ref. No.
Complies(1) Complies(1)
361e/01
FT120
Nominal csa of conductor (mm2) 1.5 2.5 4.0 Core Construction (excluding drain wire and earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 BS 6387 C,W,Z C,W,Z C,W,Z BS EN 50200 Class PH120 Class PH120 Class PH120 BS 84342 120min (2) 120min (2) 120min
(2)
Complies
(1)
Complies
(1)
Enhanced
(3)
Complies
(1)
Enhanced
(3)
Uo/U 300/500V Notes: 1) In meeting the requirements of BS 7629-1: 2008, the FT120 cables listed met the requirements of smoke density of BS EN 61034-2: 2005 and achieved less than 0.5%HCl on the insulation, binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999. 2) The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase. 3) The FT120 cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008. Certificate No: 361g to BS 8491: 2008, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005 and BS EN 60332-3-24: 2009
FTP120
Nominal csa of conductor (mm 2 ) 2.5(1,2) 4.0(1,2) 6.0(1,2) 10(1,2) 16(1,2) 25(1,2) 35(1,2) 50(1,2) Core Construction (excluding earth wire) 7 2, 3, 4 & 7 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 8491 (fire survival time) 120min 120min 120min 120min 120min 120min 120min 120min BS EN 502672-1 <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl BS EN 61034-2 >60% >60% >60% >60% >60% >60% >60% >60% BS EN 60332-324 Complies Complies Complies Complies Complies Complies Complies Complies LPCB Ref. No. 361g/01
12 Sep 2011
377
PART 1: SECTION 8
FIRE RESISTANT CABLES
Nominal csa of conductor (mm 2 ) 70(1,2) 95(1,2) 120(1,2) 150(1,2) 185(1,2) 240(1,2) 300(1,2) 400(1,2) Uo/U 600/1000V Note 1: Note 2: Stranded conductor only. All cables have the blue core designated as a Neutral conductor; only phase to earth voltage was applied to the 2 core cables. Core Construction (excluding earth wire) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 8491 (fire survival time) 120min 120min 120min 120min 120min 120min 120min 120min BS EN 502672-1 <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl BS EN 61034-2 >60% >60% >60% >60% >60% >60% >60% >60% BS EN 60332-324 Complies Complies Complies Complies Complies Complies Complies Complies LPCB Ref. No.
Certificate No: 361h to BS6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999
FT SIFER 950i
Nominal csa of conductor (mm 2) 1.5 2.5 4.0 6.0 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 Uo/U 600/1000V Notes: 1) Stranded conductor only. 2) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core. 3) These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387. 4) Where a single cable is fitted in a conduit, only phase to earth voltage was applied. 5) To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. 6) To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. 7) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the other metallic element. 8) FT SIFER 950i cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950C and at a voltage rating of 600V. Certificate No: 361h to BS 6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999 Core construction (see note 1) One One One One One One One One One One One One One One One One One One One BS 6387 (see notes 2-4) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(6,7) C,W,Z(6,7) C,W,Z(6,7) C,W,Z(6,7) IEC 60331-21 (see note 8) Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies BS EN 50267-2-1 (outer covering) <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI LPCB Ref. No. 361h/01
378
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES FT SIFER 950s
Nominal csa of conductor (mm 2) 1.5 2.5 4.0 6.0 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800 1000 Uo/U 600/1000V Notes: 1) 2) 3) 4) 5) 6) 7) 8) Stranded conductor only. Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core. These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387. Where a single cable is fitted in a conduit, only phase to earth voltage was applied. To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the other metallic element. The FT SIFER 950s cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950C and at a voltage rating of 600V. Core construction (see note 1) One One One One One One One One One One One One One One One One One One One One One BS 6387 (see notes 2-4) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(6,7) C,W,Z(6,7) C,W,Z(6,7) C,W,Z(6,7) C(7) C(7) C(7) IEC 60331-21 (see note 8) Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies BS EN 50267-2-1 (outer covering) <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI <0.5% HCI LPCB Ref. No. 361h/02
Ducab - FR
Nominal csa of conductor (mm 2) 1.5 2.5 4.0 6.0 10 Uo/U 600/1000V Note 1: Stranded conductors only. Core construction (see note 1) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7846 F2(2) F2(2) F2(2) F2(2) F2(2) LPCB Ref. No. 949a/01
12 Sep 2011
379
PART 1: SECTION 8
FIRE RESISTANT CABLES
Note 2: In meeting the requirements of BS 7846: 2009 Category F2, the Ducab - FR cables listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the insulation, tapes, filler, bedding and outer covering when tested in accordance with BS EN 50267-2-1: 1999.
Ducab - FR
Nominal csa of conductor (mm 2) 1.5 2.5 4.0 6.0 10 16 25 35 Uo/U 600/1000V Notes: 1) Stranded conductor only. 2) In meeting the requirements of BS 7846: 2000 (incorporating Amendments Nos. 1 & 2) Category F2, the Ducab - FR cables met the requirements for fire resistance characteristics category CWZ specified in Clause 11 of BS 6387: 1994. Core Construction (see note 1) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7846 (Incorporating Amendments Nos. 1 and 2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) LPCB Ref. No. 781a/01
Certificate No: 781b to BS 7846: 2000 This certificate is to a withdrawn version of the BS 7846: 2000. Cables conforming to this version of the standard may not be suitable for use within the jurisdiction of the European Union (EU)
Ducab - FR
Nominal csa of conductor (mm2) 1.5 2.5 4.0 6.0 10 16 25 35 Uo/U 600/1000 V Notes: 1) Stranded conductors only. 2) In meeting the requirements of BS 7846: 2000 Category F2, the Ducab - FR cables met the requirements for fire resistance characteristics category CWZ specified in Clause 11 of BS 6387: 1994. 3) BS 7846: 2000 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with the CENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006. However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by some regulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the time being, to satisfy the requirements of these regulators. Certificate 781a covers cables certified in accordance with BS 7846: 2000 (Incorporating Amendments Nos. 1 & 2) Core Construction (see Note 1) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7846 (see Notes 2 & 3) F2 F2 F2 F2 F2 F2 F2 F2 LPCB Ref. No. 781b/01
380
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Certificate No: 781c to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 50268-2: 2000 and IEC 60331-21: 1999
Ducab - FR SC
Nominal csa of conductor (mm 2) 1.5 2.5 4.0 6.0 10 Uo/U 600/1000V Notes: 1) Stranded conductor only. 2) Clause 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core. 3) To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. 4) These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387. 5) Where a single cable is fitted in a conduit, only phase to earth voltage was applied. 6) These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950C and at a voltage rating of 600V. Core Construction (see note 1) One One One One One BS 6387 (see notes 2 - 5) C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z BS EN 502672-1 <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl BS EN 50268-2 >60% >60% >60% >60% >60% IEC 6033121 (see note 6) Complies Complies Complies Complies Complies LPCB Ref. No. 781c/01
Ducab - FR
Nominal csa of conductor (mm2) 16 25 35 50 70 95 120 150 185 240 300 400 Uo/U 600/1000V Notes: 1) Stranded conductors only. 2) In meeting the requirements of BS 7846: 2000 Incorporating Amendments Nos. 1 & 2) Category F2, the Ducab - FR cables met the requirements for fire resistance characteristics category CWZ specified in Clause 11 of BS 6387:1994. Core Construction (see note 1) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7846 (Incorporating Amendments Nos. 1 and 2) F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 LPCB Ref. No. 782a/01
12 Sep 2011
381
PART 1: SECTION 8
FIRE RESISTANT CABLES
Certificate No: 782b to BS 7846: 2000 This certificate is to a withdrawn version of the BS 7846: 2000. Cables conforming to this version of the standard may not be suitable for use within the jurisdiction of the European Union (EU)
Ducab - FR
Nominal csa of conductor (mm2) 16 25 35 50 70 95 120 150 185 240 300 400 Uo/U 600/1000 V Notes: 1) Stranded conductors only. 2) In meeting the requirements of BS 7846: 2000 Category F2, the Ducab - FR cables listed met the requirements for fire resistance characteristics category CWZ specified in Clause 11 of BS 6387: 1994. 3) BS 7846: 2000 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with the CENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006. However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by some regulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the time being, to satisfy the requirements of these regulators. Certificate 782a covers cables certified in accordance with BS 7846: 2000 (Incorporating Amendments Nos. 1 & 2) Core Construction (see note 1) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7846 (see notes 2 & 3) F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 F2 LPCB Ref. No. 782b/01
Certificate No: 782c to BS 6387: 1994, IEC 60331-21: 1999, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005
Ducab - FR SC
Nominal csa of conductor mm 2 1.5 2.5 4.0 6.0 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 Uo/U 600/1000V Notes: 1) 2) 3) Stranded conductor only. Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core. These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387. Core construction (See note 1) One One One One One One One One One One One One One One One One One One One BS 6387 (See notes 2 - 4) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(6,7) C,W,Z(6,7) C,W,Z(6,7) C,W,Z(6,7) C,W,Z(6,7) C,W,Z(6,7) BS EN 50267 -2-1 <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl BS EN 61034-2 IEC 60331-21 (See note 8) Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies LPCB Ref. No.
>60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60%
782c/01
382
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
4) 5) 6) 7) 8) Where a single cable is fitted in a conduit, only phase to earth voltage was applied. To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the other metallic element. These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950C and at a voltage rating of 600V.
Ducab - FR
Nominal csa of conductor (mm) 1.5 2.5 4.0 6.0 10 16 Core construction (see note 1) 2, 3, 4, 5, 7, 12, 19, 27, 37 & 48 2, 3, 4, 5, 7, 12, 19, 27, 37 & 48 2, 3, 4, 5, 7, 12, 19, 27, 37 & 48 2, 3, 4 & 5 2, 3, 4 & 5 2, 3, 4 & 5 BS 7846 F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) LPCB Ref. No. 782d/01
Uo/U 600/1000V Notes: 1) 2) Stranded conductors only. In meeting the requirements of BS 7846: 2009 Category F2, the Ducab-FR cables listed met the requirements for fire resistance characteristics Category CWZ specified in Clause 11 of BS 6387: 1994.
Certificate No: 782f to BS 6387: 1994, IEC 60331-21: 1999, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005
Ducab - FR SCS
Nominal csa of conductor (mm) 1.5 2.5 4.0 6.0 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 Uo/U 600/1000V Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Note 7: Note 8: Stranded conductor only. Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core. These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387. Where a single cable is fitted in a conduit, only phase to earth voltage was applied. To satisfy the requirement of BS 6387, testing for C, W & Z categories were conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for W & Z categories were conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the other metallic element. These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950oC and at a voltage rating of 600V. Core construction (See note 1) One One One One One One One One One One One One One One One One One One One BS 6387 (See notes 2 - 4) C, W, Z(5) C, W, Z(5) C, W, Z(6,7) C, W, Z(6,7) BS50267-2-1 <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl BS61034-2 >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% IEC 60331-21 (See note 8) Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies LPCB Ref. No. 782f/01
12 Sep 2011
383
PART 1: SECTION 8
FIRE RESISTANT CABLES
Eland Cables
120 Highgate Studios, 53-79 Highgate Road, London NW5 1TL, United Kingdom Tel: +44 (0)20 7241 8787 Fax: +44 (0)20 7241 8700 E-mail: sales@eland.co.uk Website: www.eland.co.uk
Certificate No: 568c-(cl-1) to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), BS EN 50200: 2000, BS 8434-1: 2003 30min and BS 5839-1: 2002 Clause 26.2d
FireForce
Nominal csa of conductor (mm) 1.0(1) 1.5(1) 2.5(1) 4.0(2) Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 (Incorporating Amendments Nos. 1 & 2) Complies(3) Complies(3) Complies(3) Complies(3) BS EN 50200 Class PH30 Class PH30 Class PH30 Class PH30 BS 84341 30min(4) 30min(4) 30min(4) 30min(4) BS 5839-1 Clause 26.2 Standard(5) Standard(5) Standard(5) Standard(5) LPCB Ref. No. 568c/01
Notes: 1) Solid and Stranded conductors. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), the FireForce cables listed met the requirements of smoke density of BS EN 50268-2: 2000 and achieved less than 0.5%HCl on the (insulation, binder tape & outer covering) when tested in accordance with BS EN 50267-2-1: 1999. 4) The duration of 30min when tested in accordance with BS 8434-1: 2003 is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase as described in Clause 26.2 d) of BS 5839-1: 2002. 5) The FireForce cables listed conform to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), met Class PH30 when tested in accordance with EN 50200: 2000 and met a duration of 30min when tested in accordance with BS 8434-1: 2003 and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002.
FIREX
Nominal csa of conductors (mm) 1.0(1) 1.5(1) 2.5(1) 4.0(2) Uo/U 300/500 V Notes: 1) Solid and stranded conductors. 2) Stranded conductor only. Certificate No: 568a-(cl-3) to BS 6387: 1994 and BS EN 50267-2-1: 1999 Core Construction 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 6387 C, W, Z C, W, Z C, W, Z C, W, Z BS EN 50267-2-1 (outer covering) <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI LPCB Ref. No. 568a/01
FIREX-UK
Nominal csa of conductors (mm) 1.0(1) 1.5(1) 2.5(1) 4.0(2) Core Construction 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 6387 C, W, Z C, W, Z C, W, Z C, W, Z BS EN 50267-2-1 (outer covering) <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI LPCB Ref. No. 568a/01
384
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Uo/U 300/500 V Notes: 1) Solid and stranded conductors. 2) Stranded conductor only. Certificate No: 711c-(cl-3) to BS 6387: 1994 and BS EN 50200: 2006 Class PH30
GST
Nominal csa of conductors (mm) 1.0(1) 1.5(1) 2.5(1) 4.0(2) Core Construction 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 6387 C, W, Z C, W, Z C, W, Z C, W, Z BS EN 50267-2-1 (outer covering) <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI LPCB Ref. No. 568a/01
12 Sep 2011
385
PART 1: SECTION 8
FIRE RESISTANT CABLES
Uo/U 300/500 V Notes: 1) Solid and stranded conductors. 2) Stranded conductor only. Certificate No: 682a-(cl-4) to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120, BS EN 50200: 2006 Annex E, BS 5839-1: 2002+A2: 2008 Clause 26.2d
GST
Nominal csa of conductor (mm) 1.0(1) 1.5(1) 2.5(1) 4.0(2) Core construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2 BS 7629-1 Complies(3) Complies(3) Complies(3) Complies(3) BS EN 50200 Class PH120 Class PH120 Class PH120 Class PH120 BS EN 50200 Annex E 30min(4) 30min(4) 30min(4) 30min(4) BS 5839-1 Clause 26.2 Standard(5) Standard(5) Standard(5) Standard(5) LPCB Ref. No. 682a/01
Uo/U 300/500V Notes: 1) 2) 3) 4) 5) Solid conductor only Stranded conductor only In meeting the requirements of BS 7629-1:2008, the GST cables listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387:1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1:1999. The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase. The GST cables listed conform to BS 7629-1:2008, met Class PH120 when tested in accordance with BS EN 50200:2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1:2002+A2:2008.
386
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Uo/U 450/750V Notes: 1) Clause 8 (Bending) and 9.1 & 9.2 (Impact) can not be conducted due to the cable having only one core. 2) Where a single cable is fitted in a conduit, only phase to earth voltage was applied. 3) To satisfy the requirement of BS 6387, testing for C & W categories was conducted using a 20mm stainless steel conduit as the other metallic element. 4) To satisfy the requirement of BS 6387, testing for Z category was conducted using a 20mm stainless steel conduit as the other metallic element. 5) To satisfy the requirement of BS 6387, testing for W category was conducted using a 38mm stainless steel conduit as the other metallic element. 6) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the other metallic element. 7) Testing to IEC 60331-21: 1999 was conducted at 450V.
12 Sep 2011
387
PART 1: SECTION 8
FIRE RESISTANT CABLES
Certificate No: 948b to BS 60702-1: 2002, BS 6387: 1994, BS 5839-1: 2002+A2:2008 Clause 26.2e, BS EN 50200: 2006 Class PH120, BS 8343-2: 2003+A2:2009 120min and BS EN 50267-2-1: 1999
BS EN 502672-1 (outer covering) <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl
2.5(1,2) 4.0
(1,2)
Enhanced(4) Enhanced
(4)
Uo/U 300/500V Notes: 1) 2) 3) 4) Solid conductor only. The above cables are certified in Served construction only. In meeting the requirements of BS EN 60702-1: 2002, the TEC MI SERVED CABLE (LIGHT DUTY) listed met the requirements of smoke density of IEC 61034-2: 2005 and also met the requirements of pH & conductivity when tested in accordance with IEC 60754-2-am1: 1997. The TEC MI SERVED CABLE (LIGHT DUTY) listed conform to BS EN 60702-1: 2002, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met a duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for an Enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.
388
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES Kilflam 2000
Nominal csa of conductor (mm2) 1.0(1) 1.5(2,3) 2.5(4) 4.0(4) Uo/U 300/500V Notes: 1) Solid conductor only. 2) Solid conductor at 3 & 4 cores only. 3) Stranded conductor at 2 core only. 4) Stranded conductor only. 5) In meeting the requirements of BS 7629-1:1997 (Incorporating Amendments Nos. 1 and 2), the Kilflam 2000 cables met the requirements of smoke density of BS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387:1994 and achieved less than 0.5%HCI on the (outer covering, insulation and binder tape) when tested in accordance with BS EN 50267-2-1: 1999. 6) The duration of 30min when tested in accordance with BS 8434-1: 2003 is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase as described in Clause 26.2d) of BS 5839-1:2002. 7) The Kilflam 2000 cables listed conform to BS 7629-1:1997 (Incorporating Amendments Nos. 1 and 2), met Class PH30 when tested in accordance with BS EN 50200:2000 and met the 30min duration when tested in accordance with BS 8434-1: 2003 and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1:2002. Certificate No: 408b to BS 6387: 1994 Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 (Incorporating Amendments Nos.1 & 2) Complies(5) Complies(5) Complies(5) Complies(5) BS EN 50200 BS 8434-1 BS 5839-1 Clause 26.2 Standard(7) Standard(7) Standard(7) Standard(7) LPCB Ref. No.
408a/01
Kilflam 1000
Nominal csa of conductor (mm2) 1.5 2.5 4.0 6.0 10.0 16.0 Uo/U 450/750V Notes: 1) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) can not be conducted due to the cable only having one core. 2) To satisfy the requirements of BS 6387, testing for C, W and Z categories was conducted using 20mm steel conduit as the other metallic element. Certificate No: 408d to BS 6387: 1994 and BS EN 50267-2-1: 1999 Core Construction One One One One One One BS 6387 C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z LPCB Ref. No. 408b/01
Kilflam 1200
Nominal csa of conductor (mm2) 1.5 2.5 4.0 6.0 10.0 Uo/U 600/1000V Notes: 1) Stranded conductor only. 2) Clause 8 (Bending) and 9.1 & 9.2 (Impact) can not be conducted due to the cable having only one core. 3) The Kilflam 1200 cable also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387. 4) To satisfy the requirement of BS 6387, testing for C category was conducted using a 20mm steel conduit as the other metallic element. 5) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm steel conduit as the other metallic element. Core Construction (see note 1) One(4,6) One(4,6) One(4,6) One(5,6) One(5,6) BS 6387 (see notes 2, 3 & 7) C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z BS EN 50267-2-1 (outer covering) <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl LPCB Ref. No. 408d/01
12 Sep 2011
389
PART 1: SECTION 8
FIRE RESISTANT CABLES
6) To satisfy the requirement of BS 6387, testing for W and Z categories was conducted using a 20mm steel conduit as the other metallic element. 7) Where a single cable is fitted in a conduit, only phase to earth voltage was applied. Certificate No: 408e to BS 7629-1: 1997 This certificate is to a withdrawn version of the BS 7629-1: 1997. Cables conforming to this version of the standard may not be suitable for use within the jurisdiction of the European Union (EU), BS EN 50200: 2000 Class PH30, BS 8434-1: 2003 30min and BS 5839-1: 2002 Clause 26.2d
Kilflam 2000
Nominal csa of conductor (mm) 1.0(1) 1.5(2,3) 2.5(4) 4.0(4) Uo/U 300/500V Notes: 1) Solid conductor only. 2) Solid conductor at 3 & 4 cores only. 3) Stranded conductor at 2 core only. 4) Stranded conductor only 5) In meeting the requirements of BS 7629-1: 1997, the Kilflam 2000 cables listed met the requirements of smoke density of BS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387 1994 and achieved less than 0.5%HCl on the (outer covering, binder tape & insulation) when tested in accordance with BS EN 50267-2-1: 1999. 6) The duration of 30min when tested in accordance with BS 8434-1: 2003 is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase as described in Clause 26.2d) of BS 5839-1: 2002. 7) The Kilflam 2000 cables listed conform to BS 7629-1: 1997, met Class PH30 when tested in accordance with BS EN 50200: 2000 and met the 30min duration when tested in accordance with BS 8434-1: 2003 and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002. 8) BS 7629-1: 1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with the CENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006. However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by some regulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the time being, to satisfy the requirements of these regulators. Certificate 408a covers cables certified in accordance with BS 7629-1: 1997 (Incorporating Amendments Nos. 1 and 2) Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 (see note 8) Complies(5) Complies(5) Complies(5) Complies(5) BS EN 50200 BS 8434-1 BS 5839-1 Clause 26.2 Standard(7) Standard(7) Standard(7) Standard(7) LPCB Ref. No.
408e/01
Fumeguard FR
Nominal csa of conductor (mm) 1.5 2.5 4.0 6.0 10.0 16.0 Uo/U 450/750V Notes: 1) Clauses 8 (Bending) and 9.1 & 9.2 (Impact) can not be conducted due to the cable having only one core. 2) To satisfy the requirement of BS 6387, testing for C, W, and Z categories was conducted using 20mm steel conduit as the other metallic element. Certificate No: 408f to BS 7629-1: 2008, BS EN 50200: 2006 Class PH30, BS EN 50200: 2006 Annex E 30min and BS 5839-1: 2002+A2:2008 Clause 26.2d Core construction One One One One One One BS 6387 C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z LPCB Ref. No. 408b/01
390
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Nominal csa of conductor (mm) 1.5(1) 2.5(2) 4.0(2) Uo/U 300/500V Notes: 1) 2) 3) 4) 5) Solid conductor only. Stranded conductor only. In meeting the requirements of BS 7629-1: 2008, the Kilflam Standard 2000 cables listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the (outer covering, binder tape & insulation) when tested in accordance with BS EN 50267-2-1: 1999. The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase as described in Clause 26.2d) of BS 5839-1: 2002+A2:2008. The Kilflam Standard 2000 cables listed conform to BS 7629-1: 2008, met Class PH30 when tested in accordance with BS EN 50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008. Core construction (excluding earth wire) 2, 3 & 4 2, 3 & 4 2 BS 7629-1 Complies(3) Complies(3) Complies(3) BS EN 50200 Class PH30 Class PH30 Class PH30 BS EN 50200 Annex E 30min(4) 30min(4) 30min(4) BS 5839-1 Clause 26.2 Standard(5) Standard(5) Standard(5) LPCB Ref. No.
Certificate No: 408g to BS 7629-1: 1997 This certificate is to a withdrawn version of the BS 7629-1: 1997. Cables conforming to this version of the standard may not be suitable for use within the jurisdiction of the European Union (EU), BS EN 50200: 2006 Class PH30, BS EN 50200: 2006 Annex E and BS 5839-1: 2002+A2:2008 Clause 26.2d
12 Sep 2011
391
PART 1: SECTION 8
FIRE RESISTANT CABLES
Certificate No: 408j to BS 7629-1: 2008, BS 5839-1: 2002+A2:2008 Clause 26.2e, BS EN 50200: 2006 Class PH120 and BS 8434-2: 2003+A2:2009
Kilflam 3000
Nominal csa of conductor (mm) 1.0(1) 1.5(1) 2.5(2) 4.0(3) Uo/U 300/500V Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Solid conductor only. Solid & Stranded conductors. Stranded conductor only. In meeting the requirements of BS 7629-1: 2008, the Kilflam 3000 cables listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase. The Kilflam 3000 cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008. Core construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 Complies(4) Complies(4) Complies(4) Complies(4) BS EN 50200 Class PH120 Class PH120 Class PH120 Class PH120 BS 8434-2 120min(5) 120min(5) 120min(5) 120min(5) BS 5839-1 Clause 26.2 Enhanced(6) Enhanced(6) Enhanced(6) Enhanced(6) LPCB Ref. No. 408j/01
Certificate No: 408k to BS 6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999
Kilflam 1000 a
Nominal csa of conductor (mm) 1.0 1.5 2.5 4.0 6.0 10 16 25 35 50 70 95 120 Uo/U 600/1000V Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Note 7: Note 8: Note 9: Stranded conductor only. Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core. These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387. Where a single cable is fitted in a conduit, only phase to earth voltage was applied. To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the other metallic element. These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950C and at a voltage rating of 600V. The Kilflam 1000 a cable also met IEC 60331-21: 1999 when installed in steel conduit. Core construction (See note 1) One One One One One One One One One One One One One BS 6387 (See notes 2-4) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(6,7) C,W,Z(6,7) C,W,Z(6,7) C(7) C(7) C(7) C(7) BS EN 50267-2-1 (Outer covering) <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl IEC 60331-21 (See notes 8 & 9) Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies LPCB Ref. No. 408k/01
Certificate No: 408m to BS 6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999
392
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES Fumeguard FR a
Nominal csa of conductor (mm) 1.0 1.5 2.5 4.0 6.0 10 16 25 35 50 70 95 120 Uo/U 600/1000V Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Note 7: Note 8: Note 9: Stranded conductor only. Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core. These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387. Where a single cable is fitted in a conduit, only phase to earth voltage was applied. To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the other metallic element. These cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950C and at a voltage rating of 600V. The Fumeguard FR a cable also met IEC 60331-21: 1999 when installed in steel conduit. Core construction (See note 1) One One One One One One One One One One One One One BS 6387 (See notes 2-4) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(6,7) C,W,Z(6,7) C,W,Z(6,7) C(7) C(7) C(7) C(7) BS EN 50267-2-1 (Outer covering) <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl IEC 60331-21 (See notes 8 & 9) Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies LPCB Ref. No. 408m/01
Jayflame
Nominal csa of conductor (mm2) 1.0(1) 1.5(1) 2.5(1) 4.0(2) Uo/U 300/500V Notes: 1) Solid conductor only. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1: 2008, the Jayflame cables listed met the requirements of smoke density of BS EN 610342: 2005 fire resistance requirements CWZ in Clause 11 of BS 6387:1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1: 1999. 4) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase. 5) The Jayflame cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2: 2008. Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2 BS 7629-1 BS EN 50200 BS EN 50200 Annex E 30min(4) 30min(4) 30min(4) 30min(4) BS 5839-1 Clause 26.2 Standard(5) Standard(5) Standard(5) Standard(5) LPCB Ref. No.
682a/01
12 Sep 2011
393
PART 1: SECTION 8
FIRE RESISTANT CABLES
Sales Office: Tel: +852 2691 7183 Fax: +852 2695 9738 E-mail: sales@keystonecable.com Website: www.keystonecable.com
Certificate No: 663b to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005 and IEC 60331-21: 1999
394
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES Manufacturing at: Dongguan Keystone Electric Wire & Cable Co Ltd, Ye Sha Management District,, Shatin, Dongguan City, Guangdong, China Tel: +86 769 8886 1814 Fax: +86 769 8886 1696 E-mail: jessey@keystonecable.com
Sales Office: Tel: +852 2691 7183 Fax: +852 2695 9738 E-mail: sales@keystonecable.com Website: www.keystonecable.com
Uo/U 600/1000V Note: 1) Stranded conductors only. 2) In meeting the requirements of BS 7846: 2009, the KEYSTONE Fire Resistance Armoured Cables listed met the requirements for fire resistance characteristics Category CWZ specified in Clause 11 of BS 6387: 1994.
12 Sep 2011
395
PART 1: SECTION 8
FIRE RESISTANT CABLES
Certificate No: 427a to BS 6387: 1994 and BS EN 60702-1: 2002
LEONI Studer AG
Herrenmattstr. 20, CH 4658 Dniken, , Switzerland Tel: +41 62 288 83 15 Fax: +41 62 288 83 83 E-mail: wolfgang.miess@leoni-studer.ch Website: www.leoni-infrastructure.com
Certificate No: 896a to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24: 2000
396
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Nominal csa of conductor (mm 2 ) 4.0 6.0 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 Uo/U 600/1000V Notes: 1) 2) 3) 4) 5) 6) 7) 8) 9) Stranded conductor only. Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core. These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387. Where a single cable is fitted in a conduit, only phase to earth voltage was applied. To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the other metallic element. Only Clause 10 of BS 6387 was conducted. The BETAflam FR-MI 90 Cable Single Core SI cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950C and at a voltage rating of 600V. Core Construction (See note 1) one one one one one one one one one one one one one one one one one BS 6387 (See notes 2-4) C,W,Z (5) C,W,Z (5) C,W,Z (5) C,W,Z (5) C,W,Z (6,7) C,W,Z (6,7) C,W,Z (6,7) C,W,Z (6,7) C,W,Z (6,7) C(7) C(7) C(7) C(7) C(7) C(7) Complies(8) Complies(8) BS EN 50267-2-1 <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI BS EN 61034-2 >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% IEC 60331-21 (See note 9) Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies IEC 60332-324 Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies LPCB Ref. No.
Certificate No: 896a to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24: 2000
BS EN 50267-2-1 <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI
BS EN 61034-2 >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60%
IEC 60331-21 (See note 9) Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies
IEC 60332-324 Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies
C,W,Z C,W,Z (5) C,W,Z (5) C,W,Z (5) C,W,Z (5) C,W,Z (6,7) C,W,Z (6,7) C,W,Z (6,7) C(7) C(7) C(7) C(7) C(7) C(7) C(7) Complies(8) Complies(8) Complies(8)
(5)
12 Sep 2011
397
PART 1: SECTION 8
FIRE RESISTANT CABLES
1) 2) 3) 4) 5) 6) 7) 8) 9) Stranded conductor only. Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core. These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387. Where a single cable is fitted in a conduit, only phase to earth voltage was applied. To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the other metallic element. Only Clause 10 of BS 6387 was conducted. The BETAflam FR-MI 90 Cable Single Core DI cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950C and at a voltage rating of 600V.
Certificate No: 896b to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24: 2000
Certificate No: 896b to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24: 2000
398
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Nominal csa of conductor (mm 2 ) 6.0 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 Uo/U 600/1000V Notes: 1) 2) 3) 4) 5) 6) 7) 8) 9) Stranded conductor only. Clauses 8 (Bending) and 9.1 & 9.2 (Impact) cannot be conducted due to the cable having only one core. These cables also met category C,W,Z when tested for voltage rating 600/1000V which is not recognised by BS 6387. Where a single cable is fitted in a conduit, only phase to earth voltage was applied. To satisfy the requirement of BS 6387, testing for C, W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the other metallic element. Only Clause 10 of BS 6387 was conducted. The BETAflam FR-MI 110 Cable Single Core DI cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950C and at a voltage rating of 600V. Core Construction (See note 1) one one one one one one one one one one one one one one one one BS 6387 (See notes 2-4) C,W,Z(5) C,W,Z(5) C,W,Z(5) C,W,Z(6,7) C,W,Z(6,7) C,W,Z(6,7) C(7) C(7) C(7) C(7) C(7) C(7) C(7) Complies(8) Complies(8) Complies(8) BS EN 50267-2-1 <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI BS EN 61034-2 >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% >60% IEC 60331-21 (See note 9) Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies IEC 60332-324 Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies LPCB Ref. No.
Certificate No: 896c to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24: 2000
12 Sep 2011
399
PART 1: SECTION 8
FIRE RESISTANT CABLES
3) The BETAflam FR-MI 110 Cable Multicore cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950C and at a voltage rating of 600/1000V.
Certificate No: 896c to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24: 2000
Certificate No: 896c to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24: 2000
400
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
3) The BETAflam FR-MI 110 Cable Multicore SWA cables met the requirements of IEC 60331-21: 1999 when tested at a temperature of 950C and at a voltage rating of 600/1000V.
Certificate No: 896d to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005, IEC 60331-21: 1999 and IEC 60332-3-24: 2000
12 Sep 2011
401
PART 1: SECTION 8
FIRE RESISTANT CABLES
Certificate No: 946b to BS 6387: 1994, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005 and IEC 60331-21: 1999
402
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Note 5: Note 6: To satisfy the requirement of BS 6387, testing for W & Z categories was conducted using a 20mm stainless steel conduit as the other metallic element. To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the other metallic element.
FireNor PH30
Nominal csa of conductors (mm) 1.0(1) 1.5(1) 2.5(1) Uo/U 300/500V Note: 1. Solid conductor only. Core construction drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 6387 C, W, Z C, W, Z C, W, Z BS EN 50200 Class PH30 Class PH30 Class PH30 LPCB Ref. No. 711c/01
12 Sep 2011
403
PART 1: SECTION 8
FIRE RESISTANT CABLES FP400 Fire resistant cable
Nominal csa of conductor (mm2) 50 70 95 120 185 240 300 400 Uo/U 450/750V Note: 1) The FP400 cable also met categories C, W, and Z when tested for voltage rating of 600/1000V which is not recognised by BS 6387. Certificate No: 517c to BS 7346-6: 2005, BS 8491: 2008, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005 Core Construction 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 6387 C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z LPCB Ref. No. 517b/01
FP600S
Nominal csa of conductor (mm 2) 70(1) 95(1) 120(1) 150
(1)
Core construction (See note 1) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4
BS 7346-6 (fire survival time) 120min 120min 120min 120min 120min 120min 120min 120min
BS 8491 (fire survival time see note 2) 120min 120min 120min 120min 120min 120min 120min 120min
BS EN 50267-2-1 <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl
185(1) 240
(1)
300(1) 400(1)
Uo/U 600/1000V Notes: 1) Stranded conductor only. 2) In achieving a 120min fire survival time in accordance with BS 7346-6: 2005, the FP600S cables listed also achieved a 120min fire survival time in accordance with BS 8491: 2008. The test method given in BS 8491: 2008 is technically identical to the test method given in BS 7346-6: 2005, Annex B.
404
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Uo/U 300/500V Note: 1) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), the FP200 Gold LSOH cables listed met the requirements of smoke density of BS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1: 1999. Certificate No: 077a to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2)
FP200 Flex
Nominal csa of conductor (mm2) 1.0 1.5 2.5 Uo/U 300/500V Note: 1) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), the FP200 Flex cables listed met the requirements of smoke density of BS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1: 1999. Certificate No: 077b to BS 6387: 1994 and BS EN 50267-2-1: 1999 Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 (Incorporating Amendments Nos. 1 and 2) Complies(1) Complies(1) Complies(1) LPCB Ref. No. 077a/03
12 Sep 2011
405
PART 1: SECTION 8
FIRE RESISTANT CABLES
Uo/U 450/750V Notes: 1) The FP400 cable also met category C, W, Z when tested for voltage rating 600/1000 V which is not recognisedby BS 6387. 2) The FP400 cable approved with insulation type XLPE (GP8). 3) The FP400 cable approved with insulation type EPR (GP6). Certificate No: 077b to BS 6387: 1994 and BS EN 50267-2-1: 1999
FP150 LS0H
Nominal csa of conductor (mm2) 1.0 1.5 2.5 Uo/U 300/500V Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 6387 C, W, Z C, W, Z C, W, Z BS EN 50267-2-1 (outer covering) <0.5% HCl <0.5% HCl <0.5% HCl BS EN 50268-2 >60% >60% >60% LPCB Ref. No. 077d/01
406
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Certificate No: 077e to BS 6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21:1999
12 Sep 2011
407
PART 1: SECTION 8
FIRE RESISTANT CABLES
2) The single core cable also met category C, W, Z when tested for voltage rating 600/1000 V which is not recognised by BS 6387. 3) To satisfy the requirement of BS 6387, testing for C,W, and Z categories was conducted using a 20mm steel conduit as the other metallic element. 4) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm steel conduit as the other metallic element. 5) Where a single cable is fitted in a conduit, only phase to earth voltage was applied. 6) Only clause 10 of BS 6387 was conducted. 7) Testing to IEC 331 was conducted at voltage rating of 600/1000V and at 950C which is not recognised by the standard. Certificate No: 077f to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), BS EN 50200: 2000 Class PH30 & PH60 and BS 5839-1: 2002 Clause 26.2d
Class PH30 Class PH30 & PH60 Class PH30 & PH60 Class PH30 & PH60
Uo/U 300/500V Notes: 1) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), the FP200 Gold LSOH cables listed met the requirements of smoke density of BS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the insulation, binder tape & outer covering when tested in accordance with BS EN 50267-2-1: 1999. 2) The FP200 Gold LSOH cables listed conform to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), met Class PH30 when tested in accordance with BS EN 50200: 2000 and met the requirements of the additional fire, mechanical shock and water tests described in Clause 26.2 d) of BS 5839-1: 2002 and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002. Certificate No: 077g to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), BS EN 50200: 2000 Class PH120, BS 8434-2: 2003 120min & BS 5839-1: 2002 Clause 26.2e
FP Plus
Nominal csa of conductor (mm2) 1.0 1.5 2.5 Uo/U 300/500V Notes: 1) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendmennt Nos. 1 & 2), the FP Plus cables listed met the requirements of smoke density of BS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the binder tape & outer covering when tested in accordance with BS EN 50267-2-1: 1999. 2) The duration of 120min when tested in accordance with BS 8434-2: 2003 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase as described in Clause 26.2 e) of BS 5839-1: 2002. 3) The FP Plus cables listed conform to BS 7629-1: 1997, meet Class PH120 when tested in accordance with EN 50200: 2000 and meet a duration of 120min when tested in accordance with BS 8434-2: 2003 and hence meet the requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002. Certificate No: 077h to BS 7629-1: 1997 (Incorporating Amendment No.1), BS EN 50200: 2000 Class PH120, BS 8434-2: 2003 120min and BS 5839-1: Clause 26.2e Core Construction 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 (Incorporating Amendment Nos.1 & 2) Complies(1) Complies(1) Complies(1) BS EN 50200 Class PH120 Class PH120 Class PH120 BS 8434-2 120min 120min 120min BS 5839-1 Clause 26.2 Enhanced(3) Enhanced(3) Enhanced(3) LPCB Ref. No. 077g/01
408
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES FP Plus Flex
Nominal csa of conductor (mm2) 1.0 1.5 2.5 4.0 Core Construction (excluding drain wire & earth) 2,3 & 4 2,3 & 4 2,3 & 4 2,3 & 4 BS 7629-1 (Incorporating Amendment No.1) Complies (1) Complies(1) Complies(1) Complies(1) BS EN 50200 BS 84342 BS 5839-1 Clause 26.2 Enhanced(3) Enhanced(3) Enhanced(3) Enhanced(3) LPCB Ref. No.
077h/01
Uo/U 300/500V Notes: 1) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendment No.1), the FP Plus Flex cables listed met the requirements of smoke density of BS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1: 1999. 2) The duration of 120min when tested in accordance with BS 8434-2: 2003 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase as described in Clause 26.2e) of BS 5839-1: 2002. 3) The FP Plus Flex cables listed conform to BS 7629-1: 1997 (Incorporating Amendment No.1), met Class PH120 when tested in accordance with BS EN 50200: 2000 and met a duration of 120min when tested in accordance with BS 8434-2: 2003 and hence met the requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002. Certificate No: 077j to BS 7629-1: 1997 This certificate is to a withdrawn version of the BS 7629-1: 1997. Cables conforming to this version of the standard may not be suitable for use within the jurisdiction of the European Union (EU).
FP200 Flex
Nominal csa of conductor (mm2) 1.0 1.5 2.5 Uo/U 300/500V Notes: 1) In meeting the requirements of BS 7629-1: 1997, the FP200 Flex cables listed met the requirements of smoke density of BS 7622-2: 1993, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS 6425-1: 1990. Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 (see Note 2) Complies (1) Complies (1) Complies (1) LPCB Ref. No. 077j/02
12 Sep 2011
409
PART 1: SECTION 8
FIRE RESISTANT CABLES
2) BS 7629-1: 1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with the CENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006. However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by some regulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the time being, to satisfy the requirements of these regulators. Certificate 077a covers cables certified in accordance with BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2) Certificate No: 077k to BS 7629-1: 1997 This certificate is to a withdrawn version of the BS 7629-1: 1997. Cables conforming to this version of the standard may not be suitable for use within the jurisdiction of the European Union (EU), BS EN 50200: 2000 Class PH30 & PH60 and BS 5839-1: 2002 Clause 26.2d
Class PH30 Class PH30 & PH60 Class PH30 & PH60 Class PH30 & PH60
077k/01
FP Plus
Nominal csa of conductor (mm 2) 1.5 2.5 Core Construction (excluding drain wire & earth) 2 2 BS 7629-1 (Incoporating Amendments Nos. 1 & 2) Complies(2) Complies
(2)
Uo/U 300/500V Notes: 1) Solid conductor only. 2) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), the FP Plus cables listed met the requirements of smoke density of BS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1: 1999. 3) The duration of 120min when tested in accordance with BS 8434-2: 2003 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase as described in Clause 26.2e) of BS 5839-1: 2002. 4) The FP Plus cables listed conform to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), met Class PH120 when tested in accordance with BS EN 50200: 2000 and met the 120min duration when tested in accordance with BS 8434-2: 2003 and hence met the requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002. Certificate No: 077m to BS 7346-6: 2005, BS 8491: 2008, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005
410
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES FP600
Nominal csa of conductor (mm 2) 4.0(1) 6.0(1) 10(1) 16(1) 25(1) 35(1) 50(1) 70(1) Uo/U 600/1000V Notes: 1) Stranded conductor only. 2) In achieving 120min fire survival time in accordance with BS 7346-6: 2005, the FP600 cables listed also achieved a 120min fire survival time in accordance with BS 8491: 2008. The test method given in BS 8491: 2008 is technically identical to the test method given in BS 7346: 2005 Annex B. Certificate No: 077n to BS 7346-6: 2005, BS 8491: 2008, BS EN 50267-2-1: 1999 and BS EN 61034-2: 2005 Core construction 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7346-6 (fire survival time) 120min 120min 120min 120min 120min 120min 120min 120min BS 8491 (fire survival time see note 2) 120min 120min 120min 120min 120min 120min 120min 120min BS EN 50267-2-1 <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl BS EN 61034-2 >60% >60% >60% >60% >60% >60% >60% >60% LPCB Ref. No. 077m/01
FP600S
Nominal csa of conductor (mm 2) 2.5(1) 4.0(1) 6.0(1) 10(1) 16(1) 25(1) 35(1) 50(1) 70(1) Uo/U 600/1000V Notes: 1) 2) 3) Stranded conductor only. All 2 core cables have the blue core designated as a Neutral conductor; only phase to earth voltage was applied. In achieving a 120min fire survival time in accordance with BS 7346-6: 2005, the FP600S cables listed also achieved a 120min fire survival time in accordance with BS 8491: 2008. The test method given in BS 8491: 2008 is technically identical to the test method given in BS 7346-6: 2005, Annex B. Core construction (see note 2) 7 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2&3 BS 7346-6 (fire survival time) 120min 120min 120min 120min 120min 120min 120min 120min 120min BS 8491 (fire survival time see note 3) 120min 120min 120min 120min 120min 120min 120min 120min 120min BS EN 50267-2-1 <0.5%HCl <0.5%HCl <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI BS EN 61034-2 >60% >60% >60% >60% >60% >60% >60% >60% >60% LPCB Ref. No. 077n/01
12 Sep 2011
411
PART 1: SECTION 8
FIRE RESISTANT CABLES
Nominal csa of conductor (mm2) 16 25 35 50 70 95 120 150 185 240 300 Uo/U 450/750V Notes : 1) Approved for the CEC01QGR series construction. 2) Approved for the CEC01QAZ series construction. 3) Clause 8 (Bending) and 9.1 & 9.2 (Impact) of the BS 6387 standard cannot be conducted due to the cable having only one core. 4) To satisfy the requirement of BS 6387, testing for C category was conducted using a 20mm and 38mm steel conduit as the other metallic element. 5) Where a single cable is fitted in a conduit, only phase to earth voltage was applied. Certificate No: 422b to BS 6387: 1994 and BS EN 50267-2-1: 1999 Core Construction One(1) One(1) One(1) One(1) One(1) One(1) One(1) One(1) One(1) One(1) One(1) BS 6387 (See notes 3, 4 & 5) C C C C C C C C C C C BS EN 50267-2-1 (outer covering) <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl LPCB Ref. No.
RAMCRO S.p.A
Via Marzorati, 15 - 20014 Nerviano, Milan, Italy Tel: +39 0331 406560 Fax: +39 0331 406559 E-mail: ramcro@ramcro.it
Certificate No: 568a to BS 6387: 1994 and BS EN 50267-2-1: 1999
Ramfirecro-F3
Nominal csa of conductor (mm2) 1.0(1) 1.5(1) 2.5(1) Core Construction 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 6387 C, W, Z C, W, Z C, W, Z BS EN 50267-2-1 (outer covering) <0.5%HCI <0.5%HCI <0.5%HCI LPCB Ref. No. 568a/01
412
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Nominal csa of conductor (mm2) 4.0(2) Uo/U 300/500V Notes: 1) Solid and stranded conductors. 2) Stranded conductor only. Certificate No: 568b to BS 7629-1: 1997 This certificate is to a withdrawn version of the BS 7629-1: 1997. Cables conforming to this version of the standard may not be suitable for use within the jurisdiction of the European Union (EU), BS EN 50200: 2000 Class PH30, BS 8434-1: 2003 30min & BS 5839-1:2002 Clause 26.2d Core Construction 2, 3 & 4 BS 6387 C, W, Z BS EN 50267-2-1 (outer covering) <0.5%HCI LPCB Ref. No.
Ramfirecro-F3 Standard
Nominal csa of conductor (mm) 1.0 (1) 1.5 (1) 2.5 (1) 4.0 (2) Uo/U 300/500V Notes: 1) Solid and Stranded conductors. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1: 1997, the Ramfirecro-F3 Standard cables listed met the requirements of smoke density of BS 7622-2: 1993 and achieved less than 0.5%HCl on the insulation, binder tape & outer covering when tested in accordance with BS 6425-1: 1990. 4) The duration of 30min when tested in accordance with BS 8434-1: 2003 is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase as described in Clause 26.2 d) of BS 5839-1: 2002. 5) The Ramfirecro-F3 Standard cables listed conform to BS 7629-1: 1997, met Class PH30 when tested in accordance with BS EN 50200: 2000 and met a duration of 30min when tested in accordance with BS 8434-1: 2003 and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002. 6) BS 7629-1: 1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with the CENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006. However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by some regulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the time being, to satisfy the requirements of these regulators. Certificate 568c covers cables certified in accordance with BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2) Core Construction (excluding drain wire & earth) 2 ,3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 (see note 6) Complies (3) Complies (3) Complies (3) Complies (3) BS EN 50200 BS 8434-1 BS 5839-1 Clause 26.2 Standard (5) Standard (5) Standard (5) Standard (5) LPCB Ref. No.
568b/01
Certificate No: 568c to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), BS EN 50200: 2000 Class PH30, BS 8434-1: 2003 30min and BS 5839-1: 2002 Clause 26.2d
Ramfirecro-F3 Standard
Nominal csa of conductor (mm) 1.0 (1) 1.5 (1) 2.5 (1) 4.0 (2) Uo/U 300/500V Notes: 1) Solid and Stranded conductors. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), the Ramfirecro-F3 Standard cables listed met the requirements of smoke density of BS EN 50268-2: 2000 and achieved less than 0.5%HCl on the insulation, binder tape & outer covering when tested in accordance with BS EN 50267-2-1: 1999. Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 (Incorporating Amendments Nos. 1 and 2) Complies(3) Complies(3) Complies(3) Complies(3) BS EN 50200 BS 84341 BS 5839-1 Clause 26.2 Standard (5) Standard (5) Standard (5) Standard (5) LPCB Ref. No.
568c/01
12 Sep 2011
413
PART 1: SECTION 8
FIRE RESISTANT CABLES
4) The duration of 30min when tested in accordance with BS 8434-1: 2003 is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase as described in Clause 26.2d) of BS 5839-1: 2002. 5) The Ramfirecro-F3 Standard cables listed conform to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), met Class PH30 when tested in accordance with BS EN 50200: 2000 and met a duration of 30min when tested in accordance with BS 8434-1: 2003 and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002. Certificate No: 568d to IEC 60331-21: 1999, BS EN 50267-2-1: 1999, BS EN 61034-2: 2005
414
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Nominal csa of conductor (mm) 1.5(1) 2.5(1) 4.0(2) Core construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2 BS 7629-1 Complies(3) Complies(3) Complies(3) BS EN 50200 Class PH120 Class PH120 Class PH120 BS EN 50200 Annex E 30min(4) 30min(4) 30min(4) BS 58391Clause 26.2 Standard(5) Standard(5) Standard(5) LPCB Ref. No.
Uo/U 300/500V Note 1: Note 2: Note 3: Note 4: Note 5: Solid conductor only. Stranded conductor only. In meeting the requirements of BS 7629-1: 2008, the Shield-UK cables listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outer covering, binder tape and insulation when tested in accordance with BS EN 50267-2-1: 1999. The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase. The Shield-UK cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.
Firepro
Nominal csa of conductor (mm) 1.5(1) 2.5(1) 4.0(1) 6.0(1) 10(1) 16(1) Uo/U 450/750V Notes: 1) Stranded conductor only. 2) Clause 8 (Bending) and 9.1 & 9.2 (Impact) can not be conducted due to the cable having only one core. 3) To satisfy the requirement of BS 6387, testing for C, W & Z categories were conducted using a 20mm stainless steel conduit as the other metallic element. 4) To satisfy the requirement of BS 6387, testing for C category was conducted using a 38mm stainless steel conduit as the other metallic element. 5) To satisfy the requirement of BS 6387, testing for W & Z categories were conducted using a 20mm stainless steel conduit as the other metallic element. 6) Where a single cable is fitted in a conduit, only phase to earth voltage was applied. Core Construction One(3) One(3) One(3) One(3) One(4, 5) One(4, 5) BS 6387 (see note 2 & 6) C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z BS EN 50267-2-1 (outer covering) <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl LPCB Ref. No. 827a/01
12 Sep 2011
415
PART 1: SECTION 8
FIRE RESISTANT CABLES FRA-XOL (E)
Nominal csa of conductor (mm 2) 1.0(1) 1.5(1) 2.5(1) 4.0(2) Uo/U 300/500V Note 1: Note 2: Note 3: Note 4: Note 5: Solid conductor only. Stranded conductor only. In meeting the requirements of BS 7629-1: 2008, the FRA-XOL (E) cables listed met the requirements of smoke density of BS EN 61034-2: 2005 and achieved less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase. The FRA-XOL (E) cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008. Core construction (excluding drain wire and earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 Complies(3) Complies(3) Complies(3) Complies(3) BS 6387 C,W,Z C,W,Z C,W,Z C,W,Z BS EN 50200 Class PH120 Class PH120 Class PH120 Class PH120 BS 8434-2 120min(4) 120min(4) 120min(4) 120min(4) BS 5839-1 Clause 26.2 Enhanced(5) Enhanced(5) Enhanced(5) Enhanced(5) LPCB Ref. No. 982a/01
Certificate No: 982b to BS 7629-1: 1997 This certificate is to a withdrawn version of the BS 7629-1: 1997. Cables conforming to this version of the standard may not be suitable for use within the jurisdication of the European Union (EU), BS 6387: 1994, BS 5839-1: 2002+A2:2008 Clause 26.2e, BS EN 50200: 2006 Class PH120 and BS 8434-2: 2003+A2:2009 120min
FRA-XOL (E)
Nominal csa of conductor (mm 2) 1.0(1) 1.5(1) 2.5(1) 4.0(2) Uo/U 300/500V Note 1: Note 2: Note 3: Note 4: Note 5: Note 6 Solid conductor only. Stranded conductor only. In meeting the requirements of BS 7629-1: 1997, the FRA-XOL (E) cables listed met the requirements of smoke density of BS EN 50268-2: 2000 and achieved less than 0.5%HCI on the insulation, binder tape and outer covering when tested in accordance with BS EN 50267-2-1: 1999. The duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase. The FRA-XOL (E) cables listed conform to BS 7629-1: 1997, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met the 120min duration when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008. BS 7629-1: 1997 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with the CENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006. However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by some regulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the time being, to satisfy the requirements of these regulators. Core construction (excluding drain wire and earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 (see note 6) Complies(3) Complies(3) Complies(3) Complies(3) BS6387 C,W,Z C,W,Z C,W,Z C,W,Z BS EN 50200 Class PH120 Class PH120 Class PH120 Class PH120 BS 8434-2 120min(4) 120min(4) 120min(4) 120min(4) BS 5839-1 Clause 26.2 Enhanced(5) Enhanced(5) Enhanced(5) Enhanced(5) LPCB Ref. No. 982b/01
416
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES FLAME-X 950 Enhanced
Nominal csa of conductor (mm) 1.0(1) 1.5
(1)
Core Construction drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4
BS6387
2.5(1) 4.0(2)
Complies(3) Complies(3)
120min(4) 120min(4)
Enhanced(5) Enhanced(5)
Uo/U 300/500V Notes: 1) Solid conductor only. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos. 1 and 2), the FLAME-X 950 Enhanced cables listed met the requirements of smoke density of BS EN 50268-2: 2000 and achieved less than 0.5%HCl on the insulation, binder tape & outer covering when tested in accordance with BS EN 50267-2-1: 1999. 4) The duration of 120min when tested in accordance with BS 8434-2: 2003 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase as described in Clause 26.2e) of BS 5839-1: 2002. 5) The FLAME-X 950 Enhanced cables listed conform to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 and 2), met Class PH120 when tested in accordance with BS EN 50200: 2000 and met a duration of 120min when tested in accordance with BS 8434-2: 2003 and hence met the requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002. Certificate No: 814a to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 and 2), BS 6387: 1994, BS EN 50200: 2000 Class PH30, BS 8434-1: 2003 30min and BS 5839-1: 2002 Clause 26.2d
FLAME-X 950
Nominal csa of conductor (mm) Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7629-1 (Incorporating Amendments Nos. 1 & 2) Complies(3) Complies(3) Complies(3) Complies(3) BS 6387 BS EN 50200 BS 8434-1 BS 5839-1 Clause 26.2 Standard(5) Standard(5) Standard(5) Standard(5) LPCB Ref. No.
814a/01
Uo/U 300/500V Notes: 1) Solid conductor only 2) Stranded conductor only 3) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos. 1 and 2), the FLAME-X 950 cables listed met the requirements of smoke density of BS EN 50268-2: 2000 and achieved less than 0.5%HCl on the insulation, binder tape & outer covering when tested in accordance with BS EN 50267-2-1: 1999. 4) The duration of 30min when tested in accordance with BS 8434-1: 2003 is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase as described in Clause 26.2d) of BS 5839-1: 2002. 5) The FLAME-X 950 cables listed conform to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 and 2), met Class PH30 when tested in accordance with BS EN 50200: 2000 and met a duration of 30min when tested in accordance with BS 8434-1: 2003 and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002. Certificate No: 814d to BS 7846: 2000 (Incorporating Amendments Nos. 1 and 2)
12 Sep 2011
417
PART 1: SECTION 8
FIRE RESISTANT CABLES
Nominal csa of conductor (mm) 10(1) 16(1) 25(1) 35 (1) 50 (1) 70(1) 95 (1) 120 (1) 150(1) 185(1) 240(1) 300(1) Uo/U 600/1000V Notes: 1) Stranded conductor only. 2) In meeting the requirements of BS 7846: 2000 (Incorporating Amendments Nos. 1 and 2) Category F2, the FLAME-X Power cables listed met the requirements for fire resistance characteristics Category CWZ specified in Clause 11 of BS 6387: 1994. Certificate No: 814c to BS 6387: 1994, BS EN 50267-2-1: 1999 and IEC 60331-21: 1999 Core Construction 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7846: 2000 (Incorporating Amendments Nos. 1 and 2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) LPCB Ref. No.
FLAME-X-950 Power
Nominal csa of conductor (mm) 1.5(1) 2.5(1) Core construction 2, 3 & 4 2, 3 & 4 BS 7846 notes 2 & 3) F2(2) F2(2) LPCB Ref. No. 814e/01
418
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Nominal csa of conductor (mm) 4.0(1) 6.0(1) 10(1) 16(1) 25(1) 35(1) 50(1) 70(1) 95(1) 120(1) 150(1) 185(1) 240(1) 300(1) Uo/U 600/1000V Notes: 1) 2) 3) Stranded conductor only In meeting the requirements of BS 7846: 2000 Category F2, the FLAME-X Power cables listed met the requirements for fire resistance characteristics Category CWZ specified in Clause 11 of BS 6387: 1994 BS 7846: 2000 was amended in 2004 to implement the changes to the identification of cores by colours, in accordance with the CENELEC Harmonisation Document HD 308 S2. The un-amended version of the standard was withdrawn on 31st March 2006. However, cables with the old identification colours, meeting the withdrawn version of the standard, are still requested by some regulators outside of the EU. Certification to the un-amended version of the standard has therefore been maintained, for the time being, to satisfy the requirements of these regulators. Certificate 814d covers cables certified in accordance with BS 7846: 2000 (Incorporating Amendments Nos. 1 & 2) Core construction 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4 BS 7846 notes 2 & 3) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) F2(2) LPCB Ref. No.
222a/01
Uo/U 300/500V Notes: 1) Solid conductor only. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos. 1 and 2), the FIRE-safe TW950 Fire Resistant Cables listed met the requirements of smoke density of BS 7622-2: 1993, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS 6425-1: 1990. 4) The duration of 30min when tested in accordance with BS 8434-1: 2003 is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase as described in Clause 26.2d) of BS 5839-1: 2002.
12 Sep 2011
419
PART 1: SECTION 8
FIRE RESISTANT CABLES
5) The FIRE-safe TW950 Fire Resistant Cables listed conform to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 and 2), met Class PH30 when tested in accordance with BS EN 50200: 2000 and met the 30min duration when tested in accordance with BS 8434-1: 2003 and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002.
Certificate No: 222b to BS 7629-1: 1997 (Incorporating Amendments Nos. 1 & 2), BS EN 50200: 2000 Class PH120, BS 8434-2: 2003 120min & BS 5839-1: 2002 Clause 26.2e
Firesafe Enhanced
Nominal csa of conductor (mm2) 1.0 (1) 1.5
(1)
Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2, 3 & 4
BS EN 50200
BS 84342
222b/01
Enhanced
(5)
Enhanced
(5)
Enhanced
(5)
Uo/U 300/500V Notes: 1) Solid conductor only. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1: 1997 (Incorporating Amendments Nos.1 & 2), the Firesafe Enhanced cables listed met the requirements of smoke density of BS EN 50268-2: 2000, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the insulation, binder tape & outer covering when tested in accordance with BS EN 50267-2-1: 1999. 4) The duration of 120min when tested in accordance with BS 8434-2: 2003 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase as described in Clause 26.2 e) of BS 5839-1: 2002. 5) The Firesafe Enhanced cables listed conform to BS 7629-1: 1997 (Incorporating Amendments Nos.1 & 2), met Class PH120 when tested in accordance with EN 50200: 2000 and met a duration of 120min when tested in accordance with BS 8434-2: 2003 and hence met the requirements for an enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002.
420
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES Pyrotenax Bare Mineral Insulated Cable (single core heavy duty)
Nominal csa of conductor (mm2) 2.5 4.0 6.0 10 16 25 35 50 70 95 120 150 185 240 300 Uo 450V Note: 1) The above range is certified in bare construction only. 2) For single core cables, only phase to earth voltage was applied. Certificate No: 676a to BS EN 60702-1: 2002, BS 6387: 1994 and BS EN 50267-2-1: 1999 Core Construction (see note 1) One One One One One One One One One One One One One One One BS EN 60702-1 Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies BS 6387 C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z C, W, Z BS EN 50267-2-1 <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI <0.5%HCI LPCB Ref. No. 676a/02
12 Sep 2011
421
PART 1: SECTION 8
FIRE RESISTANT CABLES
Nominal csa of conductor (mm 2) 120 150 185 240 300 400 Uo/U 450/750V Notes: 1) Solid conductor only. 2) The above cables are certified in bare construction only. 3) BS 7346-6: 2005 and BS 8491: 2008 approval applies to the 25mm2 cable at 4 cores only. 4) In achieving a 120min fire survival time in accordance with BS 7346-6: 2005, the Pyrotenax Pyro MI Bare Mineral Insulated Cables (Heavy Duty) listed also achieved a 120min fire survival time in accordance with BS 8491: 2008. The test method given in BS 8491: 2008 is technically identical to the test method given in BS 7346-6: 2005, Annex B. Certificate No: 841b to BS EN 60702-1: 2002, BS 6387: 1994, BS EN 50200: 2006 Class PH120, BS 8434-2: 2003 120min, BS 58391: 2002 Clause 26.2e, BS EN 50267-2-1: 1999, BS 7346-6: 2005 and BS 8491: 2008 Core Construction (see notes 1&2) one one one one one one BS EN 60702-1 Complies Complies Complies Complies Complies Complies BS 6387 C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z BS 7346-6 (fire survival time) 120min 120min 120min 120min BS8491 (fire survival time see note 4) 120min 120min 120min 120min LPCB Ref. No.
1.5 2.5 4.0 6.0 10 16 25 35 50 70 95 120 150 185 300 400 Uo/U 450/750V
one, 2, 3, 4, 7, 12 & 19 one, 2, 3, 4, 7 & 12 one, 2, 3 & 4 one, 2, 3 & 4 one, 2, 3 & 4 one, 2, 3 & 4 one, 2, 3 & 4 one one one one one one one one one
Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies Complies
C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z C,W,Z
Class PH120 Class PH120 Class PH120 Class PH120 Class PH120 Class PH120 Class PH120 Class PH120 Class PH120 Class PH120 Class PH120 Class PH120 -
120min 120min 120min 120min 120min 120min 120min 120min 120min 120min 120min 120min -
<0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl <0.5%HCl
841b/01
Notes: 1) Solid conductor only. 2) The above cables are certified in served construction only. 3) BS EN 50200: 2006, BS 8434-2: 2003 and BS 5839-1: 2002 Clause 26.2 approval applies to the 25mm2 cable at 1 & 2 cores only. 4) The duration of 120min when tested in accordance with BS 8434-2: 2003 is achieved by 60min for the fire and impact phase and an additional 60min for the fire, impact and water phase as described in Clause 26.2e) of BS 5839-1: 2002. 5) The Pyrotenax Pyro MI Served Mineral Insulated Cables (Heavy Duty) listed conform to BS EN 60702-1: 2002, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met a duration of 120min when tested in accordance with BS 8434-2: 2003 and hence met the requirements for an Enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002.
422
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
6) BS 7346-6: 2005 and BS 8491: 2008 approval applies to the 25mm2 cable at 3 & 4 cores only. 7) In achieving a 120min fire survival time in accordance with BS 7346-6: 2005, the Pyrotenax Pyro MI Served Mineral Insulated Cables (Heavy Duty) listed also achieved a 120min fire survival time in accordance with BS 8491: 2008. The test method given in BS 8491: 2008 is technically identical to the test method given in BS 7346-6: 2005, Annex B. Certificate No: 841c to BS EN 60702-1: 2002 and BS 6387: 1994
Certificate No: 841d to BS EN 60702-1: 2002, BS 6387: 1994, BS EN 50200: 2006 Class PH120, BS 8434-2: 2003 120min, BS 5839-1: 2002+A2:2008 Clause 26.2e and BS EN 50267-2-1: 1999
BS EN 502672-1 (outer covering) <0.5% HCl <0.5% HCl <0.5% HCl <0.5% HCl
Uo/U 300/500V Notes: 1) 2) 3) 4) Solid conductor only. The above cables are certified in Served construction only. In meeting the requirements of BS EN 60702-1: 2002, the Pyrotenax Pyro MI Served Mineral Insulated Cables (Light Duty) listed met the requirements of smoke density of IEC 61034-2: 2005 and also met the requirements of pH & conductivity when tested in accordance with IEC 60754-2-am1: 1997. The Pyrotenax Pyro MI Served Mineral Insulated Cables (Light Duty) listed conform to BS EN 60702-1: 2002, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met a duration of 120min when tested in accordance with BS 8434-2: 2003 and hence met the requirements for an Enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.
12 Sep 2011
423
PART 1: SECTION 8
FIRE RESISTANT CABLES PYRO MI Mineral Insulated Cables
Nominal csa of conductor (mm2) PYRO MI Light Duty 1.0(1,2) 1.5(1,2) 2.5(1,2) 4.0(1,2) PYRO MI Heavy Duty 1.5(1,3) 1.5(1,3) 2.5(1,3) 2.5(1,3) 4.0(1,3) 6.0(1,3) 10(1,3) 16(1,3) 25(1,3) 35(1,3) 50(1,3) 70(1,3) 95(1,3) 120(1,3) 150(1,3) 185(1,3) 240(1,3) 300(1,3) 400(1,3) PYRO MI Twisted Light Duty 1.0T(1,2) 1.5T(1,2) 2.5T(1,2) 4.0T(1,2) Core Construction BS EN 607021 (see note 6) BS 6387 BS EN 502672-1 (outer covering) BS EN 50200 BS 8434-2 BS 5839-1 Clause 26.2 LPCB Ref. No. 063d/01 2, 3, 4 & 7 2, 3, 4 & 7 2, 3, 4 & 7 2 Complies
(4)
C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4) C, W, Z(4)
<0.5% HCl
(5)
Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5) Class PH120(5)
120min
(5)
Enhanced
(5,7)
one, 2, 3 & 4 7, 12 & 19 one, 2, 3 & 4 7 & 12 one, 2, 3 & 4 one, 2, 3 & 4 one, 2, 3 & 4 one, 2, 3 & 4 one, 2, 3 & 4 one one one one one one one one one one
Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4) Complies(4)
<0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5) <0.5% HCl(5)
120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5) 120min(5)
Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7) Enhanced(5,7)
2 2, 3 & 4 2 2
Notes: 1) 2) 3) 4) 5)
Solid conductor only. The PYRO MI Mineral Insulated Light Duty Cables were tested at a voltage rating of 300/500V. The PYRO MI Mineral Insulated Heavy Duty Cables were tested at a voltage rating of 450/750V. Approval applies to the Bare and Served cables. Approval applies to the Served cable only.
424
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
6) 7) In meeting the requirements of BS EN 60702-1: 2002, the PYRO MI Mineral Insulated Served Cables listed met the requirements of smoke density of IEC 61034-2: 2005 and also met the requirements of pH & conductivity when tested in accordance with IEC 60754-2-am1: 1997. The PYRO MI Mineral Insulated Served Cables listed conform to BS EN 60702-1: 2002, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met a duration of 120min when tested in accordance with BS 8434-2: 2003+A2:2009 and hence met the requirements for an Enhanced fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008.
Firetrax Gold
Nominal csa of conductor (mm 2) 1.0 (1) 1.5 (1) 2.5 (1) 4.0 (2) Uo/U 300/500V Notes: 1) Solid conductor only. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1: 2008, the Firetrax Gold cables listed met the requirements of smoke density of BS EN 61034-2: 2005 fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1:1999. 4) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase. 5) The Firetrax Gold cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2: 2008. Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2 BS 7629-1 BS EN 50200 BS EN 50200 Annex E 30min(4) 30min(4) 30min(4) 30min(4) BS 5839-1 Clause 26.2 Standard(5) Standard(5) Standard(5) Standard(5) LPCB Ref. No.
682a/01
Ventcroft Limited
Goddard Road, Astmoor Industrial Estate, Runcorn, Cheshire WA7 1NQ, United Kingdom Tel: +44 (0)1928 581098 Fax: +44 (0)1928 581099 E-mail: sales@ventcroft.co.uk Website: www.ventcroft.co.uk
Certificate No: 682a to BS 7629-1: 2008, BS EN 50200: 2006 Class PH120, BS EN 50200:2006 Annex E and BS 58391:2002+A2:2008 Clause 26.2d
NoBurn Platinum
Nominal csa of conductor (mm2) 1.0(1) 1.5(1) 2.5(1) 4.0(2) Core Construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2 BS 7629-1 BS EN 50200 BS EN 50200 Annex E BS 5839-1 Clause 26.2 Standard(5) Standard(5) Standard(5) Standard(5) LPCB Ref. No.
682a/01
12 Sep 2011
425
PART 1: SECTION 8
FIRE RESISTANT CABLES
Uo/U 300/500V Notes: 1) Solid conductor only. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1: 2008, the NoBurn Platinum cables listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387: 1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1: 1999. 4) The duration of 30min when tested in accordance with BS EN 50200: 2006 Annex E is achieved by 15min for the fire and impact phase. 5) The NoBurn Platinum cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2: 2008.
2 2, 3 & 4 2 2
Solid conductor only. The Wrexham Mineral Insulated Light Duty Cables were tested at a voltage rating of 300/500V. The Wrexham Mineral Insulated Heavy Duty Cables were tested at a voltage rating of 450/750V. Approval applies to the Bare and Served cables. Approval applies to the Served cable only. In meeting the requirements of BS EN 60702-1: 2002, the Wrexham Mineral Insulated Served Cables listed met the requirements of smoke density of IEC 61034-2: 2005 and also met the requirements of pH & conductivity when tested in accordance with IEC 60754-2-am1: 1997. The Wrexham Mineral Insulated Served Cables listed conform to BS EN 60702-1: 2002, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met a duration of 120min when tested in accordance with BS 8434?2: 2003 and hence met the requirements for an Enhanced fire resistant cable as described in Clause 26.2 of BS 5839?1: 2002+A2:2008.
426
12 Sep 2011
PART 1: SECTION 8
FIRE RESISTANT CABLES
Fire Defence
Nominal csa of conductor (mm) 1.0 (1) 1.5 (1) 2.5 (1) 4.02) Uo/U 300/500V Notes: 1) Solid conductor only. 2) Stranded conductor only. 3) In meeting the requirements of BS 7629-1: 2008, the Fire Defence cables listed met the requirements of smoke density of BS EN 61034-2: 2005, fire resistance requirements CWZ in Clause 11 of BS 6387:1994 and achieved less than 0.5%HCl on the outer covering, binder tape & insulation when tested in accordance with BS EN 50267-2-1:1999. 4) The duration of 30min when tested in accordance with BS 50200: 2006 Annex E is achieved by 15min for the fire and impact phase and an additional 15min for the fire, impact and water phase. 5) The Fire Defence cables listed conform to BS 7629-1: 2008, met Class PH120 when tested in accordance with BS EN 50200: 2006 and met the 30min duration when tested in accordance with BS EN 50200: 2006 Annex E and hence met the requirements for a standard fire resistant cable as described in Clause 26.2 of BS 5839-1: 2002+A2:2008. Core construction (excluding drain wire & earth) 2, 3 & 4 2, 3 & 4 2, 3 & 4 2 BS 7629-1 Complies(3) Complies(3) Complies(3) Complies(3) BS EN 50200 Class PH120 Class PH120 Class PH120 Class PH120 BS EN 50200 Annex E 30min(4) 30min(4) 30min(4) 30min(4) BS 5839-1 Clause 26.2 Standard(5) Standard(5) Standard(5) Standard(5) LPCB Ref. No. 330h/01
12 Sep 2011
427
PART 1: SECTION 9
ALARM RECEIVING CENTRES This section lists Alarm Receiving Centres approved to LPS 1020 Requirements for Alarm Receiving Centres and those certified to the requirements of BS 5979 Code of Practice for Remote Centres Receiving Signals from Security Systems. The Fire Services 'Model Agreement' between the Fire and Rescue authorities and users of remotely monitored fire alarm systems calls for third party certification of both the installer and the Alarm Receiving Centre (ARC). The LPCB approval scheme based on the criteria of LPS 1020 when used in conjunction with BS 5979 provides the means to achieve the alarm receiving centre requirement of the model agreement. Third party certification of the installer can be achieved via the LPCBs scheme for installers based, on the requirements of LPS 1014 Requirements for certificated fire detection and alarm systems firms. For further details of the Model Agreement contact:The Chief Fire Officers Association 9-11 Pebble Close Amington Tamworth Staffordshire B77 4RD Tel: +44 (0) 1827 302 300 Since the Alarm receiving centres must have links to the appropriate fire brigade mobilisation centres, the list includes details of the fire authority areas for which they are approved.
428
12 Sep 2011
PART 1: SECTION 9
ALARM RECEIVING CENTRES
12 Sep 2011
429
PART 1: SECTION 10
ALARM TRANSMISSION AND FAULT MONITORING EQUIPMENT AND SIGNALLING SYSTEMS Introduction This section of the Red Book lists alarm transmission and fault routing equipment suitable for use with fire alarm systems as defined by Figure 1 of EN 54-1: 1996 Fire detection and fire alarm systems Part 1. Alarm transmission equipment suitable for use with intruder alarm and hold-up systems are listed in Volume 2 Part 4 Section 1.2 of the Red Book. Where alarm transmission equipment may be suitable for use with both fire alarm systems and intruder alarm and hold-up systems the entry for the approved equipment will appear in Volume 1 Part 1 Section 10 and Volume 2 Part 4 Section 1.2 of the Red Book. Where appropriate, reference is made to published standards and the following standards are currently used for the approval schemes: EN 54-21: 2006 Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment LPS 1277 Requirements for LPCB Approval and listing of Alarm Transmission Systems and Equipment
EN 54-21: 2006 is a harmonised standard for the Construction Products Directive. Compliance with the EN standard entitles the equipment manufacturer to apply the CE mark and is mandatory in many countries within the EU. ANNEX ZA of EN 54-21 states that for CE marking purposes it is not necessary to test the alarm transmission and fault routing equipment performance characteristics in conjunction with the transmission networks to confirm the claimed transmission parameters D, M, T, A ,S and I. These parameters are however described in the EN 54-21 normative ANNEX A and may be tested as an option. Unless otherwise stated LPCB approval to EN 54-21 confirms that the routing equipment meets only those requirements of ANNEX ZA relating to the operational and environmental reliability of the item(s) located within the protected premises. Whereas LPS 1277 includes criteria for both fire and security systems that specifically requires the alarm transmission and fault routing equipment to be tested in conjunction with the appropriate transmission networks. Particular emphasis is placed on the verification of manufacturers claims by measuring alarm transmission times over the transmission path(s) between the equipment under test and the corresponding alarm receiving centre. The response to the reporting of fault conditions is measured in a similar way. The results of these measurements are expressed in terms of alarm transmission system (ATS) performance criteria classification, using the parameters D, M, T and where applicable S and I. Where, D = Transmission time classification M = Transmission time maximum values T = Reporting time classification S = Substitution Security I = Information Security Availability is considered a key parameter under LPCB approval and is therefore included within the requirements of LPS 1277 and the resultant performance is expressed using the parameter A for Availability. The actual performance parameters measured during the LPCB test programme are included with the product listing entry in the Redbook as an indicator of the level of performance that can be expected from the alarm transmission system. Products approved to LPS 1277 encompass all of the requirements of EN 54-21 and products tested and approved by the LPCB will have met the compliance criteria of EN 54-21 in full. It is therefore recommended that alarm transmission and fault routing equipment be approved to LPS 1277 where possible.
430
12 Sep 2011
PART 1: SECTION 10
ALARM TRANSMISSION AND FAULT MONITORING EQUIPMENT AND SIGNALLING SYSTEMS Compliance with relevant safety standards and applicable mandatory directives is a pre-requisite of LPCB approval and listing. Regular product auditing and regular factory inspections are carried out by LPCB ensuring high manufacturing standards and continued compliance with the applicable product standard. Notes: Since the LPCB uses national and international standards for the listing of products, in some instances the requirements of these standards may conflict with the recommendations of local codes of practice. We recommend that specifiers seek advice from the relevant local authorities and amend their specifications accordingly.
12 Sep 2011
431
Note: At the time of gong to print no alarm transmission and fault monitoring equipment was listed as compliant with EN 54-21. Please check www.redbooklive.com for updates.
432
12 Sep 2011
BT Redcare
Monument TE, 11-13 Great Tower Street, London EC3R 5EA, United Kingdom Tel: +44 (0) 800 800 828 Fax: +44 (0)20 7929 6490 Website: www.redcare.bt.com
Certificate No: 775a to LPS 1277: Issue 2.2 Product Name UC-372G-UK ASSURE STAR Fire Category B Security Grade 3 Primary Transmission Path Asynchronous digital subscriber line (ASDL) operated by BT Broadband Secondary Transmission Path General packet radio service (GRPS) on a BT mobile network LPCB Ref. No. 775a/01
Substitution Security S2 S2 S2
Information Security I3 I3 I3
Network Availability5 A3 A1 A3
Approved Ancillaries AO100 External base antenna (short) BA900-5 High gain antenna (long) CAB0106 10m low loss extension cable UltraCapture8 Video Card UltraCapture4 Video Card Notes: 1) The combined performance parameters are shown for the ASSURE STAR as a whole, i.e. with both primary and secondary transmission paths operational. The alarm transmission performance parameters of the ASSURE STAR are consistent with those of ATS 5. 2) During a planned maintenance procedure the ASSURE STAR will achieve performance classification D4 at a maximum transmission time classification M2. The maintenance procedure will be operated approximately four times per year and will be of approximately 5 minutes duration. 3) The loss of the secondary path following a previous failure of the primary path results in a reporting time classification of T4. 4) The simultaneous loss of the primary and secondary transmission paths results in a reporting time classification of T5. 5) Network availability classifications have been based on the limited availability data. At the time of the initial evaluation only a limited number of ASSURE STAR alarm transmission equipment were in service and these were subject to interruption due to engineering trials whilst the data was being recorded. The monitoring of network availability continues and the classification will be updated when available. When operating with both transmission paths functioning correctly the combined system availability will meet classification A3.
12 Sep 2011
433
Note: Meets the requirements of LPS 1277 for Category B fire alarm transmission equipment. The DualCom Fire has two transmission paths, a primary path signalling over the Packet Data Radio Network operated by Vodafone Ltd., and a secondary path operating over the Public Switched Telephone Network
Alarm transmission system performance parameters Transmission Transmission time Transmission Reporting time Path classification time classification Max. values M3 <90s1
Network availability
Primary Secondary
D4 D3
T3 T52
A4 A4
Notes: 1) Equivalent to M2 of EN 50136-1-1:1998 2) The simultaneous loss of the primary and secondary transmission paths results in a reporting time classification of T3 Approved with the following Ancillaries CS 1050 DualCom 8 Channel Expander CS 1053 DualCom High gain aerial
WebWayOne Ltd
11 Kingfisher Court, Hambridge Road, Newbury, Berkshire RG14 5SJ, United Kingdom Tel: +44 (0)1635 231500 Fax: +44 (0)1635 231539 E-mail: sales@webwayone.co.uk Website: www.webwayone.co.uk
Certificate No: 1022a/01 & 02 to LPS 1277: Issue 3.0
Approved with the following Ancillaries 22-5054 High performance disc antenna 22-5049-5m High gain extension antenna with 5 metre cable 22-5049-10m High gain extension antenna with 10 metre cable 22-5049-15m High gain extension antenna with 15 metre cable 22-5049-20m High gain extension antenna with 20 metre cable 22-5076 PSTN Dialler PCB module 22-5073 RS232 Serial interface module2) 22-5076 Modem capture alarm panel interface module2)
434
12 Sep 2011
The alarm transmission and fault routing equipment is to be used in accordance with the installation instructions and in conjunction with fire alarm control and indicating equipment compliant with EN 54-2 and capable of meeting options with requirements associated with Clause 7.9, 8.2.4(g), 8.2.5(b), 8.9, 9.4.1(c), 9.4.2(b), 10.1(e), 11(a) and 11(b). Fire alarm and fire fault or trouble signals from the alarm panel must be connected via PIN inputs. The PIN inputs shall be programmed as End of Line (EOL). The 22-5005 WebWay IP/GPRS LPS Fire Type 1 shall be housed within a metallic enclosure providing protection against ingress to IP30 at access level 2 and be connected to an integral power supply compliant with EN 54-4.
2)
Fire alarm, fire fault or trouble messages must be transmitted using the PIN interfaces.
The performance of the above listed products has been found to meet the fire detection and alarm system requirements of LPS 1277 Issue 3.0 with the following performance parameters: Alarm Transmission System Performance Parameters 22-5005 WebWay IP/GPRS LPS Fire Type 1
EN54-21 Type 1
GPRS
N/A
1022a/01
Substitution Security S2
Information Security I3
Primary path reporting time Network Availability confirmed with both designated primary and secondary paths operating.
ATS path failure conditions Loss of Primary path only (i.e. secondary path remaining operational) Loss of Secondary path only (i.e. primary path remaining operational) Loss of Secondary path w hilst operating w ithout Primary path (i.e. the loss of Secondary path some time after a previous loss of the Primary path).
T4
The detected loss of the primary path followed by immediate detection of loss of the Secondary path.
Product Name
Fire Category
EN54-21 Type 2
N/A
GPRS
PSTN
N/A
1022a/02
12 Sep 2011
435
Substitution Security S2
Information Security
I3
Primary path reporting time. Network Availability confirmed with both designated primary and secondary paths operating.
ATS path failure conditions Loss of Primary path only (i.e. secondary path remaining operational) Loss of Secondary path only (i.e. primary path remaining operational) Loss of Secondary path w hilst operating w ithout Primary path (i.e. the loss of Secondary path some time after a previous loss of the Primary path).
T3
The detected loss of the primary path followed by immediate detection of loss of the Secondary path.
436
12 Sep 2011
BT Redcare
Monument TE, 11-13 Great Tower Street, London EC3R 5EA, United Kingdom Tel: +44 (0) 800 800 828 Fax: +44 (0)20 7929 6490 Website: www.redcare.bt.com
Certificate No: 099a Certificated Products 3GSTU-12V 3GSTU-24V LPCB Ref. No. n/a n/a
Note to Specifiers In January 2008 Red Book entries for the BT Redcare 3GSTU-12V and 3GSTU-24V alarm transmission equipment were removed because the scheme against which these products were approved had been superseded by LPS 1277. LPCB assessment of the quality management system associated with production of the 3GSTU-12V and 3GSTU-24V has been maintained and both products, now referred to as 'Classic STU' and 'Fire STU', are currently being evaluated to LPS 1277. Red Book listing will be reinstated once compliance with the requirements of LPS 1277 has been successfully demonstrated.
12 Sep 2011
437