This document provides specifications for building a tricopter drone using glass-fiber material and various screw sizes. It recommends an arm length of 50cm from the center of gravity to the motor and includes a diagram of the drone layout showing dimensions for the front arms, center plate, and dampened GoPro camera mount made of plywood.
This document provides specifications for building a tricopter drone using glass-fiber material and various screw sizes. It recommends an arm length of 50cm from the center of gravity to the motor and includes a diagram of the drone layout showing dimensions for the front arms, center plate, and dampened GoPro camera mount made of plywood.
This document provides specifications for building a tricopter drone using glass-fiber material and various screw sizes. It recommends an arm length of 50cm from the center of gravity to the motor and includes a diagram of the drone layout showing dimensions for the front arms, center plate, and dampened GoPro camera mount made of plywood.
Material used: 1.5mm Glass-ber (100*130mm) Screwes: M 3 - 15mm long M2.5 - 15mm long 2.5mm 2.5mm Recommended arm length: 50cm, from CG to motor output-shaft