Professional Documents
Culture Documents
by defaultly spanning tree is assigned to every vlan on the switch spanning tree is used for selected vlans by using spannin tree vlan 1, 10, 20-21, etc RAPID SPANNING : o Spainning- tree mode rapid-pvst
OSPF: Int s0/0 o o o No shut Clock rate 64000 Ip add 192.168.10.1 255.255.255.0
o Ip ospf 1 area 0
o Exit Int s0/1 No shut Clock rate 64000 Ip add 192.168.20.1 255.255.255.0 Exit Router ospf 1 Network 192.168.10.0 0.0.0.255 area 0 Network 192.168.20.0 0.0.0.255 area 0 -----------------------------------------------------Int f0/0 Ip ospf 4 area 146 Sh ip osp data
Debug ip ospf hell Do un all ----------------------Vlannnnnnnnnnnnnnnnnnnnn o o o Area 1 virtual-link 2.2.2.2 Area 1 virtual-ling 3.3.3.3 Sh ip ospf virtual-link
Ospf authentication
Int f0/0 o Ip ospf authent-key cisco (giving password o Ip ospf authentication (set pass word) o No ip ospf authenticao o Ip ospf authentic null Sh run int f0/0
Virtual link: Router ospf 1 o Area 146 virtual-link (destination router-id) Sh ip ospf virtual
o o o o o o o o o o On 2 router Config)# no loggine console Int s0/0 No shut Encap fram Int s0/0.1 point-to-point Ip add 192.168.100.2 255.255.255.252 Do sh frma pvc Frame-realy interface-dlci 202 Show frame pvc Spoke configurtationwr No logging console R#CONFIG)#int s0/0 No shut Encapsulation frame-relay Int s0/0.1 point-to-point Ip add 192.168.100.1 255.255.255.252 Frame-relay interface-dlci 101 Int s0/0.2 point-to-point Ip add 192.168.100.5 255.255.255.252 Frame-relay interface-dlci 102