Professional Documents
Culture Documents
Reliance 3G MF190 User Guide For Windows
Reliance 3G MF190 User Guide For Windows
Copyright Statement
Copyright 2010 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.
Contents 1 Introduction....................................................................................................................................4 1.1 Introduction.........................................................................................................................4 1.2 Warning and Notice.............................................................................................................4 1.2.1 To the owner ..........................................................................................................4 1.2.2 Device ....................................................................................................................4 1.2.3 In Aircraft................................................................................................................5 1.3 Applicability Scope .............................................................................................................5 1.4 System requirements ...........................................................................................................5 1.5 Functions.............................................................................................................................5 2 Installation......................................................................................................................................5 2.1 Installing Software ..............................................................................................................5 2.2 Running Application Software ............................................................................................6 2.3 Uninstalling Software..........................................................................................................6 3 Functions & Operation...................................................................................................................6 3.1 Interface Introduction..........................................................................................................6 3.1.1 Functional Button..................................................................................................6 3.1.2 The uses of Tray Icons ........................................................................................7 3.2 Internet ................................................................................................................................7 3.2.1 Connecting to Internet .........................................................................................7 3.2.2 Disconnecting to Internet.....................................................................................7 3.2.3 Data Records ........................................................................................................7 3.3 SMS.....................................................................................................................................7 3.3.1 Reading SMS ........................................................................................................8 3.3.2 Creating a new SMS ............................................................................................8 3.3.3 SMS Interface Operating Guide .........................................................................8 3.4 Phonebook...........................................................................................................................8 3.4.1 Creating a new record .........................................................................................9 3.4.2 Searching Records...............................................................................................9 3.4.3 Phonebook Interface Operating Guide..............................................................9 3.5 Settings................................................................................................................................9 3.5.1 Connection ............................................................................................................9 3.5.2 Selection ..............................................................................................................10 3.5.3 Preference ...........................................................................................................10 3.5.4 SMS Settings.......................................................................................................10 3.5.5 Sounds .................................................................................................................10 3.5.6 Security ................................................................................................................10 3.5.7 System ................................................................................................................. 11 3.5.8 Update Settings .................................................................................................. 11 4. FAQ & Answers .......................................................................................................................... 11
1 Introduction
1.1 Introduction
Thank you for choosing Reliance 3G MF190. To guarantee the device always in its best condition, please read this manual carefully and keep it for further use. The pictures, symbols and contents in this manual are just for your reference. They might not be completely identical with your device. We operate a policy of continuous development. We reserve the right to update the technical specifications in this document at any time without prior notice. The modem is a multi-mode 3G device, working in HSPA/ WCDMA/ EDGE/ GPRS/ GSM networks. The modem integrates the functionality of a mobile phone (SMS), and combines mobile communication with Internet perfectly. It supports data, and SMS services through the mobile phone network, enabling you to communicate anytime and anywhere.
1.2.2 Device
Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your devices performance, and violate related national regulations about telecom terminals. Avoid using the device near metallic structure device or establishment that can emit electromagnet wave. Otherwise it may influence receiving signals. The device is non-waterproof type, please keep it dry and store in shady and cool place. Dont use the device immediately after a sudden temperature change. In such case, it will produce dew inside and outside the device, so dont use it until it becomes dry. Take the device carefully.
Dont lose, bend or cause it struck. Otherwise it will lead to destruct damage. No dismantling by non-professional and only qualified maintainer can undertake repair work.
1.2.3 In Aircraft
Please power off the device before the airplane takes off. In order to protect airplanes communication system from interference, it is never allowed to use the device when it is in flight. Using it before the plane taking off should get aircrews permission according to safety regulations.
The performance of the device may be influenced if configuration below recommended requirement.
1.5 Functions
Functions: SMS, data service, Phone Book service, applied management, support micro SD card etc.
2 Installation
2.1 Installing Software
1. Double click the setup.exe file. 2. After a few seconds, the system starts software installation automatically. 3. You can select a different location by pressing icon, and then click the Next button. 4. The system shows the installation progress. Wait a minute and program installation is complete. Note: If you have problems with installation after the above operation, please contact the service provider for help.
Connect: Connect to Internet and open the homepage. Diagnostics: View the hardware information, operational information and network information. Homepage: Link to the homepage: http://www.rcom.co.in/mobilebroadband/index.html. SMS: Send SMS or read SMS. Phonebook: Save and view the information of contacts. Settings: Set normal relative information for the application software. Data records: View the connection records.
1. Click
1. Click
3.3 SMS
Click icon to switch to the SMS interface. You can select the location of saving SMS (Local or (U)SIM card ), and execute different operations in the Inbox, Sentbox, Draftbox, Important, Deleted and Report. Click Inbox, Sentbox, Draftbox, Important, Deleted, and Report to view the SMS list. Note: To make sure that the SMS can be used properly, at first, you should setup the correct SMS center number. Inbox: Save the received messages. Sentbox: Save the successfully sent messages, or the failed sent messages.
Draftbox: Save the editing messages which havent been sent. According to the requirement, there may be three boxes below: Important: Save the important messages. Deleted: Save the deleted messages. Report: Save the message reports.
New: Create a new message. Reply: Reply short message to the sender. (Execute this item in Inbox) Forward: Edit the content and then forward the short message to other recipients. (Execute this item in Inbox) Save Num: Save the sender number obtained from the message to phonebook. Move: Move the selected SMS from PC to (U)SIM or from (U)SIM to PC (Execute this item in Inbox, Sentbox) Delete: Delete selected short message(s).
If you delete the short messages stored in Deleted or Report, then the delete operation will delete the messages for ever, and if you delete the short messages stored in other boxes, the delete operation will move the selected messages to the Deleted.
3.4 Phonebook
Click Phonebook icon to switch to the Phonebook interface. The phonebook information
can be saved in PC or (U)SIM card, and you can choose the saved position. A record saved in PC includes Name, MobilePhone, HomePhone, OfficePhone, Email1, Email2 and Group. If saved in (U)SIM card, the record may include Name, MobilePhone, which depends on the capability of saving records in (U)SIM card. The capability of saving records and the number of current saving records in PC or (U)SIM card are shown at the left top corner of the interface.
3.5 Settings
Click Settings icon to switch to the settings interface. It includes: Connection, Selection, Preference, SMS Settings, Sounds, Security, System, and Update Settings. Click close icon to turn back to the main interface at the right top of the interface.
3.5.1 Connection
To ensure that the device can connect the Internet properly, you should configure the connection information firstly. Button description Add: Add a new configuration file.
View/Edit: View/Edit the selected configuration file. Delete: Delete the selected configuration file. Apply: Choose one of configuration files to be a default file.
3.5.2 Selection
1. Automatic: The system selects the network automatically according to users configuration rules and network status. Select network Automatic. The system will find the network available automatically. 2. Manual: User selects network in a manual way. Select network Manual, click the Search button to research the network. Wait a moment and the supplier list will show in the windows and which with the available status can be selected. Select a proper network to connect. Select the network that the supplier is utilized to serve your (U)SIM and press the Apply button to enter the network.
3.5.3 Preference
1. Automatic: The system selects the available network automatically. 2. UMTS/HSPA Only: The system will only select the 3G network. 3. GPRS/EDGE Only: The system will only select the 2G network.
3.5.5 Sounds
You can set Network connect alert, Network disconnect alert, and SMS alert by yourself. The audio file supports MP3WAVWMA and MIDI format. Click the Browse button to replace the default audio file. These alerts sound on the PC side. If you select Mute, you can not hear corresponding alert.
3.5.6 Security
You can enable the PIN Code verification by select PIN Enable. When Enable item is selected, you will be asked to enter PIN code to use the device. Click the Change button to modify the PIN Code. Enter the old PIN code and a new PIN code; click the OK button to save. Note: This function needs network support.
3.5.7 System
1. Startup If Auto start when the device is available item is selected, the OS will detect and recognize the device and run the UI automatically. 2. Auto connect If Auto Connect item is selected, when the software is started, the software will connect the internet automatically.
After installation, the system doesn't install the driver program properly.
Please install the driver program manually. The driver program can be found in the installation folder, usually you can open C:\Program Files, find and open the folder of the UI software, and then you can find the drivers folder. Please run Reliance 3G program manually. First click the Start Programs, find the Reliance 3G, and click it or an alias icon on the desktop.
After the device is plugged in, the Reliance 3G program doesn't run automatically.
1. You are in the place where there is no HSPA+ / HSPA / WCDMA/ EDGE /GPRS /GSM network coverage. Such places include underground parking garages, tunnels, and some remote rural areas. 2. The device is not properly connected. 3. The SIM/USIM card isn't inserted properly. 4. The device is positioned in such a way as that adversely affects the devices signal reception. 1. The installation programs of the device have not been installed properly. 2. The device is connected properly. not
2. Close the device safely as usual, pull out the device and reinsert the device again. 3. Remove and reinsert SIM/USIM card correctly. the
4. Adjust the angle / position of the device or its proximity to other electronic devices. 1. Run the installation program first, then connect the device. Now install the drivers as normal in Windows. 2. Restart the computer, reconnect the device. or
When the Device is being installed, the computer cannot find it.
3. The SIM/USIM card is not inserted properly. Sent Message failure. 1. The SMS center number is incorrect.
3. Reinsert the SIM/USIM card correctly. 1. Your device is preconfigured so it is unlikely that it will need to change. However if it is missing or incorrect contact your operator.
2. The network is busy or you are in an area with no signal. 1. You are in the place where there is no HSPA+ / HSPA/ WCDMA/ EDGE / GPRS/ GSM network coverage. 2. The network is busy. Data connection failed. 3. The APN in the user configuration file is incorrect. 4. The device corrupted. data is
2. Try later or move to an area with a stronger signal. 1. Move to an area with good signal.
2. Try later. 3. Check the APN in the user configuration file in the "Connection settings". 4. Local network access or the target server maybe experiencing problems. Retry data request. 5. Reselect the network type according to the type of the SIM/USIM card. 1. Check that the APN in the configuration files is correct. 2. Upgrade to the new version or reinstall the IE browser. 3. Use the professional anti-virus software to check and remove the virus.
5. The network type has been selected manually, but is incorrect. 1. After connection, you are unable to open web pages. 2. IE browser is causing problems. 3. Your operating system maybe infected by a virus. Worm Blaster for example can affect upload and downloaded data flow, resulting in an inability to access a website. 4. You have connected to an APN which cannot connect to the Internet.
4. This happens when you are changing any preset operator value in the setting section. Check the entry and enter the correct APN from your operator.