Professional Documents
Culture Documents
INS68
TECHNICAL SPECIFICATION ICON TYPE: FILENAME: ENGINE CODE: IGNITION SYSTEM: 1 x ICONST As engine code.ICR (eg 3S-FE.ICR) Various Toyota ESA
Fitting Instructions
1. Locate the ECU and remove the lid. (Along the pins of the connector on the PCB are pin labels 2. Find the pins that are labelled IGT, +B and E01. 3. Locate the wire from the pin labelled E01 and connect the black wire from the icon to it. 4. Join the red ICON wire to the +B wire from the multi plug. 5. Locate the wire in the ECU loom that goes to the IGT pin. Cut this wire and connect the yellow with the black trace wire from the ICON to the ECU/connector side of the cut and the yellow wire from the ICON to the loom side of the cut. 6.Ensure that all the connections are insulated. If the pins in the ECU are not labelled then use the following connector configurations diagrams to locate the desired pins. ECU Connector Configuration Each following page features a different connector configuration. Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 18pins - 12 pins 14 - 18 - 10 24 - 18 - 10 26 - 16 - 12 22 - 16 - 26 26 - 16 - 24 26 - 16
NB: If a connection block does not contain wires used by us then it may not be drawn the correct size.
All Toyotas
INS68 Contd
E 01 IG T +B E 02
All Toyotas
INS68 Contd
1 4 p in s
+B 1 +B
1 8 p in s
1 0 p in s
E 01 IG T E 02
All Toyotas
INS68 Contd
24 pins
IGT +B1 +B
18 pins
10 pins
E01 E02
All Toyotas
INS68 Contd
Page 5 : 26-16-12pins
26 pins
E01 IGT +B
16 pins
12 pins
3S-FE RAV 4 AT
26 pins
E01 E02 IGT
16 pins
12 pins
+B +B1
All Toyotas
INS68 Contd
Page 6 : Diagram of ECU plug. The IGT pin is normally a white wire.
22
16
26
3S-GE MR2
3S-FE 3S-GE
IGT +B1 +B
E01 E02
All Toyotas
INS68 Contd
26 pins
E 01 E 02 IG T
16 pins
24 pins
+B +B1
All Toyotas
INS68 Contd
Page 8 : 26-16pins
E01 E02
IGT
+B1 +B